| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit f320bc742bc23 ("KVM: arm64: Prepare the creation of s1
mappings at EL2"), pKVM switches from a temporary host-provided
page-table to its own page-table at EL2. Since there is only a single
TTBR for the nVHE hypervisor, this involves disabling and re-enabling
the MMU in __pkvm_init_switch_pgd().
Unfortunately, the memory barriers here are not quite correct.
Specifically:
- A DSB is required to complete the TLB invalidation executed while
the MMU is disabled.
- An ISB is required to make the new TTBR value visible to the
page-table walker before the MMU is enabled in the SCTLR.
An earlier version of the patch actually got this correct:
https://lore.kernel.org/lkml/20210304184717.GB21795@willie-the-truck/
but thanks to some badly worded review comments from yours truly, these
were dropped for the version that was eventually merged.
Bring back the barriers and fix the potential issue (but note that this
was found by code inspection).
Cc: Quentin Perret <qperret@google.com>
Fixes: f320bc742bc23 ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104164220.7968-1-will@kernel.org
|
|
* kvm-arm64/fgt-rework: (30 commits)
: .
: Fine Grain Trapping update, courtesy of Fuad Tabba.
:
: From the cover letter:
:
: "This patch series has fixes, updates, and code for validating
: fine grain trap register masks, as well as some fixes to feature
: trapping in pKVM.
:
: New fine grain trap (FGT) bits have been defined in the latest
: Arm Architecture System Registers xml specification (DDI0601 and
: DDI0602 2023-09) [1], so the code is updated to reflect them.
: Moreover, some of the already-defined masks overlap with RES0,
: which this series fixes.
:
: It also adds FGT register masks that weren't defined earlier,
: handling of HAFGRTR_EL2 in nested virt, as well as build time
: validation that the bits of the various masks are all accounted
: for and without overlap."
:
: This branch also drags the arm64/for-next/sysregs branch,
: which is a dependency on this work.
: .
KVM: arm64: Trap external trace for protected VMs
KVM: arm64: Mark PAuth as a restricted feature for protected VMs
KVM: arm64: Fix which features are marked as allowed for protected VMs
KVM: arm64: Macros for setting/clearing FGT bits
KVM: arm64: Define FGT nMASK bits relative to other fields
KVM: arm64: Use generated FGT RES0 bits instead of specifying them
KVM: arm64: Add build validation for FGT trap mask values
KVM: arm64: Update and fix FGT register masks
KVM: arm64: Handle HAFGRTR_EL2 trapping in nested virt
KVM: arm64: Add bit masks for HAFGRTR_EL2
KVM: arm64: Add missing HFGITR_EL2 FGT entries to nested virt
KVM: arm64: Add missing HFGxTR_EL2 FGT entries to nested virt
KVM: arm64: Explicitly trap unsupported HFGxTR_EL2 features
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64/sysreg: Add new system registers for GCS
arm64/sysreg: Add definition for FPMR
arm64/sysreg: Update HCRX_EL2 definition for DDI0601 2023-09
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
pKVM does not support external trace for protected VMs. Trap
external trace, and add the ExtTrcBuff to make it possible to
check for the feature.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231214100158.2305400-18-tabba@google.com
|
|
We have some special handling for VPIPT I-cache in critical parts
of the cache and TLB maintenance. Remove it.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231204143606.1806432-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the introduction of FEAT_LPA2, the Arm ARM adds a new level of
translation, level -1, so levels can now be in the range [-1;3]. 3 is
always the last level and the first level is determined based on the
number of VA bits in use.
Convert level variables to use a signed type in preparation for
supporting this new level -1.
Since the last level is always anchored at 3, and the first level varies
to suit the number of VA/IPA bits, take the opportunity to replace
KVM_PGTABLE_MAX_LEVELS with the 2 macros KVM_PGTABLE_FIRST_LEVEL and
KVM_PGTABLE_LAST_LEVEL. This removes the assumption from the code that
levels run from 0 to KVM_PGTABLE_MAX_LEVELS - 1, which will soon no
longer be true.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-9-ryan.roberts@arm.com
|
|
Implement a simple policy whereby if the HW supports FEAT_LPA2 for the
page size we are using, always use LPA2-style page-tables for stage 2
and hyp stage 1 (assuming an nvhe hyp), regardless of the VMM-requested
IPA size or HW-implemented PA size. When in use we can now support up to
52-bit IPA and PA sizes.
We use the previously created cpu feature to track whether LPA2 is
supported for deciding whether to use the LPA2 or classic pte format.
Note that FEAT_LPA2 brings support for bigger block mappings (512GB with
4KB, 64GB with 16KB). We explicitly don't enable these in the library
because stage2_apply_range() works on batch sizes of the largest used
block mapping, and increasing the size of the batch would lead to soft
lockups. See commit 5994bc9e05c2 ("KVM: arm64: Limit
stage2_apply_range() batch size to largest block").
With the addition of LPA2 support in the hypervisor, the PA size
supported by the HW must be capped with a runtime decision, rather than
simply using a compile-time decision based on PA_BITS. For example, on a
system that advertises 52 bit PA but does not support FEAT_LPA2, A 4KB
or 16KB kernel compiled with LPA2 support must still limit the PA size
to 48 bits.
Therefore, move the insertion of the PS field into TCR_EL2 out of
__kvm_hyp_init assembly code and instead do it in cpu_prepare_hyp_mode()
where the rest of TCR_EL2 is prepared. This allows us to figure out PS
with kvm_get_parange(), which has the appropriate logic to ensure the
above requirement. (and the PS field of VTCR_EL2 is already populated
this way).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-8-ryan.roberts@arm.com
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
* kvm-arm64/mops:
: KVM support for MOPS, courtesy of Kristina Martsenko
:
: MOPS adds new instructions for accelerating memcpy(), memset(), and
: memmove() operations in hardware. This series brings virtualization
: support for KVM guests, and allows VMs to run on asymmetrict systems
: that may have different MOPS implementations.
KVM: arm64: Expose MOPS instructions to guests
KVM: arm64: Add handler for MOPS exceptions
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We currently have a global VTCR_EL2 value for each guest, even
if the guest uses NV. This implies that the guest's own S2 must
fit in the host's. This is odd, for multiple reasons:
- the PARange values and the number of IPA bits don't necessarily
match: you can have 33 bits of IPA space, and yet you can only
describe 32 or 36 bits of PARange
- When userspace set the IPA space, it creates a contract with the
kernel saying "this is the IPA space I'm prepared to handle".
At no point does it constraint the guest's own IPA space as
long as the guest doesn't try to use a [I]PA outside of the
IPA space set by userspace
- We don't even try to hide the value of ID_AA64MMFR0_EL1.PARange.
And then there is the consequence of the above: if a guest tries
to create a S2 that has for input address something that is larger
than the IPA space defined by the host, we inject a fatal exception.
This is no good. For all intent and purposes, a guest should be
able to have the S2 it really wants, as long as the *output* address
of that S2 isn't outside of the IPA space.
For that, we need to have a per-s2_mmu VTCR_EL2 setting, which
allows us to represent the full PARange. Move the vctr field into
the s2_mmu structure, which has no impact whatsoever, except for NV.
Note that once we are able to override ID_AA64MMFR0_EL1.PARange
from userspace, we'll also be able to restrict the size of the
shadow S2 that NV uses.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231012205108.3937270-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.7
The main addition is the initial support for the notifications and
memory transaction descriptor changes added in FF-A v1.1 specification.
The notification mechanism enables a requester/sender endpoint to notify
a service provider/receiver endpoint about an event with non-blocking
semantics. A notification is akin to the doorbell between two endpoints
in a communication protocol that is based upon the doorbell/mailbox
mechanism.
The framework is responsible for the delivery of the notification from
the ender to the receiver without blocking the sender. The receiver
endpoint relies on the OS scheduler for allocation of CPU cycles to
handle a notification.
OS is referred as the receiver’s scheduler in the context of notifications.
The framework is responsible for informing the receiver’s scheduler that
the receiver must be run since it has a pending notification.
The series also includes support for the new format of memory transaction
descriptors introduced in v1.1 specification.
Apart from the main additions, it includes minor fixes to re-enable FF-A
drivers usage of 32bit mode of messaging and kernel warning due to the
missing assignment of IDR allocation ID to the FFA device. It also adds
emitting 'modalias' to the base attribute of FF-A devices.
* tag 'ffa-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Upgrade the driver version to v1.1
firmware: arm_ffa: Update memory descriptor to support v1.1 format
firmware: arm_ffa: Switch to using ffa_mem_desc_offset() accessor
KVM: arm64: FFA: Remove access of endpoint memory access descriptor array
firmware: arm_ffa: Simplify the computation of transmit and fragment length
firmware: arm_ffa: Add notification handling mechanism
firmware: arm_ffa: Add interface to send a notification to a given partition
firmware: arm_ffa: Add interfaces to request notification callbacks
firmware: arm_ffa: Add schedule receiver callback mechanism
firmware: arm_ffa: Initial support for scheduler receiver interrupt
firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_SET interface
firmware: arm_ffa: Implement the FFA_RUN interface
firmware: arm_ffa: Implement the notification bind and unbind interface
firmware: arm_ffa: Implement notification bitmap create and destroy interfaces
firmware: arm_ffa: Update the FF-A command list with v1.1 additions
firmware: arm_ffa: Emit modalias for FF-A devices
firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging
firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device
Link: https://lore.kernel.org/r/20231010124354.1620064-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
An Armv8.8 FEAT_MOPS main or epilogue instruction will take an exception
if executed on a CPU with a different MOPS implementation option (A or
B) than the CPU where the preceding prologue instruction ran. In this
case the OS exception handler is expected to reset the registers and
restart execution from the prologue instruction.
A KVM guest may use the instructions at EL1 at times when the guest is
not able to handle the exception, expecting that the instructions will
only run on one CPU (e.g. when running UEFI boot services in the guest).
As KVM may reschedule the guest between different types of CPUs at any
time (on an asymmetric system), it needs to also handle the resulting
exception itself in case the guest is not able to. A similar situation
will also occur in the future when live migrating a guest from one type
of CPU to another.
Add handling for the MOPS exception to KVM. The handling can be shared
with the EL0 exception handler, as the logic and register layouts are
the same. The exception can be handled right after exiting a guest,
which avoids the cost of returning to the host exit handler.
Similarly to the EL0 exception handler, in case the main or epilogue
instruction is being single stepped, it makes sense to finish the step
before executing the prologue instruction, so advance the single step
state machine.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230922112508.1774352-2-kristina.martsenko@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
FF-A v1.1 removes the fixed location of endpoint memory access descriptor
array within the memory transaction descriptor structure. In preparation
to remove the ep_mem_access member from the ffa_mem_region structure,
provide the accessor to fetch the offset and use the same in FF-A proxy
implementation.
The accessor take the FF-A version as the argument from which the memory
access descriptor format can be determined. v1.0 uses the old format while
v1.1 onwards use the new format specified in the v1.1 specification.
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-14-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When SVE is enabled, the host may set bit 16 in SMCCC function IDs, a
hint that indicates an unused SVE state. At the moment NVHE doesn't
account for this bit when inspecting the function ID, and rejects most
calls. Clear the hint bit before comparing function IDs.
About version compatibility: the host's PSCI driver initially probes the
firmware for a SMCCC version number. If the firmware implements a
protocol recent enough (1.3), subsequent SMCCC calls have the hint bit
set. Since the hint bit was reserved in earlier versions of the
protocol, clearing it is fine regardless of the version in use.
When a new hint is added to the protocol in the future, it will be added
to ARM_SMCCC_CALL_HINTS and NVHE will handle it straight away. This
patch only clears known hints and leaves reserved bits as is, because
future SMCCC versions could use reserved bits as modifiers for the
function ID, rather than hints.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230911145254.934414-4-jean-philippe@linaro.org
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.6
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
|
|
* kvm-arm64/6.6/misc:
: .
: Misc KVM/arm64 updates for 6.6:
:
: - Don't unnecessary align non-stack allocations in the EL2 VA space
:
: - Drop HCR_VIRT_EXCP_MASK, which was never used...
:
: - Don't use smp_processor_id() in kvm_arch_vcpu_load(),
: but the cpu parameter instead
:
: - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
:
: - Remove prototypes without implementations
: .
KVM: arm64: Remove size-order align in the nVHE hyp private VA range
KVM: arm64: Remove unused declarations
KVM: arm64: Remove redundant kvm_set_pfn_accessed() from user_mem_abort()
KVM: arm64: Drop HCR_VIRT_EXCP_MASK
KVM: arm64: Use the known cpu id instead of smp_processor_id()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/tlbi-range:
: .
: FEAT_TLBIRANGE support, courtesy of Raghavendra Rao Ananta.
: From the cover letter:
:
: "In certain code paths, KVM/ARM currently invalidates the entire VM's
: page-tables instead of just invalidating a necessary range. For example,
: when collapsing a table PTE to a block PTE, instead of iterating over
: each PTE and flushing them, KVM uses 'vmalls12e1is' TLBI operation to
: flush all the entries. This is inefficient since the guest would have
: to refill the TLBs again, even for the addresses that aren't covered
: by the table entry. The performance impact would scale poorly if many
: addresses in the VM is going through this remapping.
:
: For architectures that implement FEAT_TLBIRANGE, KVM can replace such
: inefficient paths by performing the invalidations only on the range of
: addresses that are in scope. This series tries to achieve the same in
: the areas of stage-2 map, unmap and write-protecting the pages."
: .
KVM: arm64: Use TLBI range-based instructions for unmap
KVM: arm64: Invalidate the table entries upon a range
KVM: arm64: Flush only the memslot after write-protect
KVM: arm64: Implement kvm_arch_flush_remote_tlbs_range()
KVM: arm64: Define kvm_tlb_flush_vmid_range()
KVM: arm64: Implement __kvm_tlb_flush_vmid_range()
arm64: tlb: Implement __flush_s2_tlb_range_op()
arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
KVM: Allow range-based TLB invalidation from common code
KVM: Remove CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
KVM: arm64: Use kvm_arch_flush_remote_tlbs()
KVM: Declare kvm_arch_flush_remote_tlbs() globally
KVM: Rename kvm_arch_flush_remote_tlb() to kvm_arch_flush_remote_tlbs()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
commit f922c13e778d ("KVM: arm64: Introduce
pkvm_alloc_private_va_range()") and commit 92abe0f81e13 ("KVM: arm64:
Introduce hyp_alloc_private_va_range()") added an alignment for the
start address of any allocation into the nVHE hypervisor private VA
range.
This alignment (order of the size of the allocation) intends to enable
efficient stack verification (if the PAGE_SHIFT bit is zero, the stack
pointer is on the guard page and a stack overflow occurred).
But this is only necessary for stack allocation and can waste a lot of
VA space. So instead make stack-specific functions, handling the guard
page requirements, while other users (e.g. fixmap) will only get page
alignment.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811112037.1147863-1-vdonnefort@google.com
|
|
Define __kvm_tlb_flush_vmid_range() (for VHE and nVHE)
to flush a range of stage-2 page-tables using IPA in one go.
If the system supports FEAT_TLBIRANGE, the following patches
would conveniently replace global TLBI such as vmalls12e1is
in the map, unmap, and dirty-logging paths with ripas2e1is
instead.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-10-rananta@google.com
|
|
Numerous production kernel configs (see [1, 2]) are choosing to enable
CONFIG_DEBUG_LIST, which is also being recommended by KSPP for hardened
configs [3]. The motivation behind this is that the option can be used
as a security hardening feature (e.g. CVE-2019-2215 and CVE-2019-2025
are mitigated by the option [4]).
The feature has never been designed with performance in mind, yet common
list manipulation is happening across hot paths all over the kernel.
Introduce CONFIG_LIST_HARDENED, which performs list pointer checking
inline, and only upon list corruption calls the reporting slow path.
To generate optimal machine code with CONFIG_LIST_HARDENED:
1. Elide checking for pointer values which upon dereference would
result in an immediate access fault (i.e. minimal hardening
checks). The trade-off is lower-quality error reports.
2. Use the __preserve_most function attribute (available with Clang,
but not yet with GCC) to minimize the code footprint for calling
the reporting slow path. As a result, function size of callers is
reduced by avoiding saving registers before calling the rarely
called reporting slow path.
Note that all TUs in lib/Makefile already disable function tracing,
including list_debug.c, and __preserve_most's implied notrace has
no effect in this case.
3. Because the inline checks are a subset of the full set of checks in
__list_*_valid_or_report(), always return false if the inline
checks failed. This avoids redundant compare and conditional
branch right after return from the slow path.
As a side-effect of the checks being inline, if the compiler can prove
some condition to always be true, it can completely elide some checks.
Since DEBUG_LIST is functionally a superset of LIST_HARDENED, the
Kconfig variables are changed to reflect that: DEBUG_LIST selects
LIST_HARDENED, whereas LIST_HARDENED itself has no dependency on
DEBUG_LIST.
Running netperf with CONFIG_LIST_HARDENED (using a Clang compiler with
"preserve_most") shows throughput improvements, in my case of ~7% on
average (up to 20-30% on some test cases).
Link: https://r.android.com/1266735 [1]
Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/blob/main/config [2]
Link: https://kernsec.org/wiki/index.php/Kernel_Self_Protection_Project/Recommended_Settings [3]
Link: https://googleprojectzero.blogspot.com/2019/11/bad-binder-android-in-wild-exploit.html [4]
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-3-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Turn the list debug checking functions __list_*_valid() into inline
functions that wrap the out-of-line functions. Care is taken to ensure
the inline wrappers are always inlined, so that additional compiler
instrumentation (such as sanitizers) does not result in redundant
outlining.
This change is preparation for performing checks in the inline wrappers.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-2-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
* kvm-arm64/6.6/generic-vcpu:
: .
: Cleanup the obsolete vcpu target abstraction, courtesy of Oliver.
: From the cover letter:
:
: "kvm_vcpu_init::target is quite useless at this point. We don't do any
: uarch-specific emulation in the first place, and require userspace
: select the 'generic' vCPU target on all but a few implementations.
:
: Small series to (1) clean up usage of the target value in the kernel and
: (2) switch to the 'generic' target on implementations that previously
: had their own target values. The implementation-specific values are
: still tolerated, though, to avoid UAPI breakage."
: .
KVM: arm64: Always return generic v8 as the preferred target
KVM: arm64: Replace vCPU target with a configuration flag
KVM: arm64: Remove pointless check for changed init target
KVM: arm64: Delete pointless switch statement in kvm_reset_vcpu()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Instead of writing directly to cptr_el2, use the helper that
selects which feature trap register to write to based on the KVM
mode.
Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-7-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
pKVM initialization fails on systems with v1.1+ FF-A implementations, as
the hyp does a strict match on the returned version from FFA_VERSION.
This is a stronger assertion than required by the specification, which
requires minor revisions be backwards compatible with earlier revisions
of the same major version.
Relax the check in hyp_ffa_init() to only test the returned major
version. Even though v1.1 broke ABI, the expectation is that firmware
incapable of using the v1.0 ABI return NOT_SUPPORTED instead of a valid
version.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230718184537.3220867-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Some bti instructions were missing from
commit b53d4a272349 ("KVM: arm64: Use BTI for nvhe")
1) kvm_host_psci_cpu_entry
kvm_host_psci_cpu_entry is called from __kvm_hyp_init_cpu through "br"
instruction as __kvm_hyp_init_cpu resides in idmap section while
kvm_host_psci_cpu_entry is in hyp .text so the offset is larger than
128MB range covered by "b".
Which means that this function should start with "bti j" instruction.
LLVM which is the only compiler supporting BTI for Linux, adds "bti j"
for jump tables or by when taking the address of the block [1].
Same behaviour is observed with GCC.
As kvm_host_psci_cpu_entry is a C function, this must be done in
assembly.
Another solution is to use X16/X17 with "br", as according to ARM
ARM DDI0487I.a RLJHCL/IGMGRS, PACIASP has an implicit branch
target identification instruction that is compatible with
PSTATE.BTYPE 0b01 which includes "br X16/X17"
And the kvm_host_psci_cpu_entry has PACIASP as it is an external
function.
Although, using explicit "bti" makes it more clear than relying on
which register is used.
A third solution is to clear SCTLR_EL2.BT, which would make PACIASP
compatible PSTATE.BTYPE 0b11 ("br" to other registers).
However this deviates from the kernel behaviour (in bti_enable()).
2) Spectre vector table
"br" instructions are generated at runtime for the vector table
(__bp_harden_hyp_vecs).
These branches would land on vectors in __kvm_hyp_vector at offset 8.
As all the macros are defined with valid_vect/invalid_vect, it is
sufficient to add "bti j" at the correct offset.
[1] https://reviews.llvm.org/D52867
Fixes: b53d4a272349 ("KVM: arm64: Use BTI for nvhe")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230706152240.685684-1-smostafa@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The value of kvm_vcpu_arch::target has been used to determine if a vCPU
has actually been initialized. Storing this as an integer is needless at
this point, as KVM doesn't do any microarch-specific emulation in the
first place. Instead, all we care about is whether or not the vCPU has
been initialized.
Delete the field in favor of a vCPU configuration flag indicating if
KVM_ARM_VCPU_INIT has completed for the vCPU.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230710193140.1706399-4-oliver.upton@linux.dev
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip suppor |
