summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-11-20ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128Alex Bee1-0/+2
Without setting the parent for SCLK_USB480M the clock will use xin24m as it's default parent. While this is generally not an issue for the usb blocks to work, it becomes an issue for RK3128 since SCLK_USB480M can be a parent for other HW blocks (GPU, VPU, VIO), but they will never chose it, since it is currently always running at OSC frequency which is to slow for their needs. This sets the usb2 phy's output as SCLK_USB480M's parent and it's users can chose it if desired. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20231119121340.109025-6-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-11-20ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128Alex Bee1-0/+3
The driver currently won't probe correctly if those values are missing. They have been taken from dowstream kernel and match those of other Rockchip SoCs. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20231119121340.109025-5-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-11-20ARM: dts: rockchip: Add USB host clocks for RK3128Alex Bee1-0/+2
Add the required AHB clocks for both the ehci and ohci controller. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20231119121340.109025-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-11-20ARM: dts: rockchip: Add Geniatech XPI-3128 RK3128 boardAlex Bee2-0/+398
XPI-3128 is RK3128 based SBC form Geniatec in RPi form factor Specs: - Rockchip RK3128 - 512MB/1 GB DDR3 DRAM - 8/16 GB eMMC - TF card slot - 100 MBit ethernet / RJ45 (TI DP83848C phy) - optional Marvell 88W8897 (USB version) - 3 x USB host (onboard GL852G hub connected to SoC ehci host) - 1 x USB otg - 1 x Type-C (solely for powering the board) - HDMI 1.4 out - ADC button - IR receiver - Artasie AM1805 RTC - 40 pin header Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20231119130351.112261-8-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-11-20ARM: dts: rockchip: Add sdmmc_det pinctrl for RK3128Alex Bee1-0/+4
The pincontrol for sd card detection is currently missing. Add it. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20231119130351.112261-6-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-11-19ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHYMihai Sain1-0/+3
Add interrupt support for ethernet phy subnode. Add PB8 definition to macb0 pinctrl. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20231109131149.46397-3-mihai.sain@microchip.com [claudiu.beznea: s/at91/microchip in commit title to match dts directory] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-11-19ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHYMihai Sain1-0/+3
Add interrupt support for ethernet phy subnode. Add PB8 definition to macb0 pinctrl. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20231109131149.46397-2-mihai.sain@microchip.com [claudiu.beznea: s/at91/microchip in commit title to match dts directory] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-11-19ARM: at91: pm: set soc_pm.data.mode in at91_pm_secure_init()Thomas Perrot1-0/+3
In non secure mode, soc_pm.data.mode is set when entering pm in at91_pm_begin(). This value is used (not only) to determine if the system is going into slow clock mode (at91_suspend_entering_slow_clock()). This function is called from various drivers to check this and act accordingly. If not set, the driver might enter an incorrect suspend mode. When using secure suspend mode, at91_pm_begin() is not called and thus soc_pm.data.mode is not set. Since when using secure suspend, only one suspend mode is supported, set this value directly in at91_pm_secure_init(). Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20231020130219.1255937-1-thomas.perrot@bootlin.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-11-15ARM: dts: samsung: s5pv210: fix camera unit addresses/rangesKrzysztof Kozlowski1-9/+9
The camera node has both unit address and children within the same bus mapping, thus needs proper ranges property to fix dtc W=1 warnings: Warning (unit_address_vs_reg): /soc/camera@fa600000: node has a unit name, but no reg or ranges property Warning (simple_bus_reg): /soc/camera@fa600000: missing or empty reg/ranges property Subtract 0xfa600000 from all its children nodes. No functional impact expected. Link: https://lore.kernel.org/r/20230722121719.150094-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-11-15ARM: dts: samsung: exynos4: fix camera unit addresses/rangesKrzysztof Kozlowski2-21/+22
The camera node has both unit address and children within the same bus mapping, thus needs proper ranges property to fix dtc W=1 warnings: Warning (unit_address_vs_reg): /soc/camera@11800000: node has a unit name, but no reg or ranges property Warning (simple_bus_reg): /soc/camera@11800000: missing or empty reg/ranges property Subtract 0x11800000 from all its children nodes. No functional impact expected. Link: https://lore.kernel.org/r/20230722121719.150094-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-11-15ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandleKrzysztof Kozlowski1-4/+1
Devicetree for the FIMC IS camera included duplicated PMU node as its child. This is not a correct representation of the hardware. Mapping the PMU (Power Management Unit) IO memory should be via syscon-like phandle (samsung,pmu-syscon, already used for other drivers), not by duplicating "pmu" Devicetree node inside the FIMC IS. The change is not compatible with older Linux kernel, which does not parse samsung,pmu-syscon property. Link: https://lore.kernel.org/r/20230722121719.150094-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-11-14ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node nameDmitry Baryshkov1-1/+1
Device tree node names should not use vendor prefix, they contain a generic name of the device. Drop the qcom, prefix from the SSBI node name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-37-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node nameDmitry Baryshkov1-1/+1
Device tree node names should not use vendor prefix, they contain a generic name of the device. Drop the qcom, prefix from the SSBI node name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-36-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channelDmitry Baryshkov1-5/+9
Use generic `adc-channel@N' node names for board-specific ADC channels (routed to MPP pins) to follow the schema. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-35-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8921: Disable keypad by defaultDmitry Baryshkov2-0/+3
Since keypad is used only by some devices, disable it by default and enable explicitly. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-34-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8974: move regulators to board filesDmitry Baryshkov8-28/+171
The vph-pwr and boost regulators (even if they are unified by design) are not a property of SoC, so move them to board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-33-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8960: drop useless rpm regulators nodeDmitry Baryshkov1-4/+0
The set of regulators available over the RPM requests is not a property of the SoC. The only msm8960 board file (qcom-msm8960-cdp) also defines this node together with the compatible string. Drop the useless device node. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-32-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8660: move RPM regulators to board filesDmitry Baryshkov3-115/+102
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-31-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: mdm9615: move RPM regulators to board filesDmitry Baryshkov2-134/+136
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-30-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064: move RPM regulators to board filesDmitry Baryshkov5-146/+108
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-29-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8058: switch to interrupts-extendedDmitry Baryshkov1-8/+5
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-28-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8018: switch to interrupts-extendedDmitry Baryshkov1-5/+3
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-27-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8921: switch to interrupts-extendedDmitry Baryshkov1-8/+5
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad DYbcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-26-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8058: use defined IRQ flagsDmitry Baryshkov1-3/+5
Use symbolic names for IRQ flags instead of using the numeric values. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-25-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8921: move reg propertyDmitry Baryshkov1-1/+1
Move reg property to come after compatible. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-24-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8018: move reg propertyDmitry Baryshkov1-2/+2
Move reg property to come after compatible. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-23-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8921: reorder nodesDmitry Baryshkov1-24/+24
Move pm8921 device nodes to follow the alphanumberic sorting order. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-22-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: pm8058: reorder nodesDmitry Baryshkov1-45/+45
Move pm8058 device nodes to follow the alphanumberic sorting order. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-21-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8660: split PMIC to separate dtsi filesDmitry Baryshkov4-148/+163
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-20-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: mdm9615: split PMIC to separate dtsi filesDmitry Baryshkov3-47/+59
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-19-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064: split PMICs to separate dtsi filesDmitry Baryshkov7-136/+140
The PMICs are not a part of the SoC, so move PMICs to separate files and include them from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-18-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8960: split PMIC to separate dtsi filesDmitry Baryshkov4-39/+44
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-17-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8960: move PMIC interrupts to the board filesDmitry Baryshkov3-2/+8
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-16-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8660: move PMIC interrupts to the board filesDmitry Baryshkov3-2/+8
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-15-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: mdm9615: move PMIC interrupts to the board filesDmitry Baryshkov2-1/+4
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-14-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064: move PMIC interrupts to the board filesDmitry Baryshkov5-4/+32
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-13-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8960: fix PMIC node labelsDmitry Baryshkov1-4/+4
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-12-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8660: fix PMIC node labelsDmitry Baryshkov2-10/+10
Change PM8058 node labels to start with pm8058_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: mdm9615: fix PMIC node labelsDmitry Baryshkov2-8/+8
Change PM8018 node labels to start with pm8018_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064: fix PMIC node labelsDmitry Baryshkov1-12/+12
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-9-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: strip prefix from PMIC filesDmitry Baryshkov23-23/+23
As the vendor DTS files were moved to per-vendor subdirs, there no need to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file. This makes 32-bit qcom/ dts files closer to arm64 ones. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-8-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clausesDmitry Baryshkov1-2/+2
Group file inclusion to follow contemporary practice. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-7-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper placeDmitry Baryshkov1-7/+7
Move sdcc1 device node to follow the alphanumberic sorting order. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-6-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8660-surf: use keypad label directlyDmitry Baryshkov1-26/+24
Directly use pm8058_keypad to declare keypad properties instead of referencing pm8058 top-level node. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: msm8960: introduce label for PMIC keypadDmitry Baryshkov2-12/+10
To simplify MSM8960 CDP board file, add label to PMIC keypad node. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom: apq8064: correct XOADC register addressDmitry Baryshkov1-1/+1
The XOADC is present at the address 0x197 rather than just 197. It doesn't change a lot (since the driver hardcodes all register addresses), but the DT should present correct address anyway. Fixes: c4b70883ee33 ("ARM: dts: add XOADC and IIO HWMON to APQ8064") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindingsDmitry Baryshkov1-20/+15
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-17-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-14ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindingsDmitry Baryshkov1-23/+18
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230824211952.1397699-16-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-11-13ARM: dts: renesas: marzen: Rename keyboard nodesGeert Uytterhoeven1-7/+7
make dtbs_check: arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: /: keyboard-gpio: {'compatible': ['gpio-keys-polled'], 'poll-interval': [[50]], 'pinctrl-0': [[29]], 'pinctrl-names': ['default'], 'key-3': {'gpios': [[28, 19, 1]], 'linux,code': [[4]], 'label': ['SW1-3'], 'debounce-interval': [[20]]}, 'key-4': {'gpios': [[28, 20, 1]], 'linux,code': [[5]], 'label': ['SW1-4'], 'debounce-interval': [[20]]}} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: pinctrl@fffc0000: keyboard-gpio: {'pins': ['GP_0_19', 'GP_0_20'], 'bias-pull-up': True, 'phandle': [[29]]} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# Node names ending in "-gpio" confuse the checker. Fix this by renaming the keyboards to "keypad-0" and "keypad-1", as they are not full keyboards. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/eec1ccfb75c6215428609fdcaf3a37c75fe1fc87.1698228163.git.geert+renesas@glider.be
2023-11-13ARM: dts: renesas: iwg22d-sodimm: Fix stmpe node namesGeert Uytterhoeven1-2/+2
make dtbs_check: arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dtb: stmpe811@44: 'stmpe_touchscreen' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dtb: stmpe811@44: 'stmpe_touchscreen' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# Fix this by using recommended node names for the STMicroelectronics Port Expander (STMPE) device node and its subnode. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/40536ce7ca01e5acc9ed1d595f0e3a720eeb78d7.1698228434.git.geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 17:20:38 +0000