summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-07-25ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supplyGrzegorz Szymaszek1-1/+1
[ Upstream commit f493162319788802b6a49634f7268e691b4c10ec ] The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ] It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ] Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ] A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up GPIO LED node namesStefan Wahren15-21/+21
[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ] Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up MMC node namesStefan Wahren2-2/+2
[ Upstream commit f230c32349eb0a43a012a81c08a7f13859b86cbb ] Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warningsAlexandre Torgue3-20/+0
[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ] Prevent warning seen with "make dtbs_check W=1" command: Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary address-cells/size-cells without "ranges" or child "reg" property Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix RCC node name on stm32f429 MCUAlexandre Torgue1-1/+1
[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ] This prevent warning observed with "make dtbs_check W=1" Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format error, expected "40023800" Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix gpio-keys node on STM32 MCU boardsAlexandre Torgue5-21/+11
[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ] Fix following warning observed with "make dtbs_check W=1" command. It concerns f429 eval and disco boards, f769 disco board. Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name, but no reg or ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix stm32mp157c-odyssey card detect pinGrzegorz Szymaszek1-1/+1
[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ] The microSD card detect pin is physically connected to the MPU pin PI3. The Device Tree configuration of the card detect pin was wrong—it was set to pin PB7 instead. If such configuration was used, the kernel would hang on “Waiting for root device” when booting from a microSD card. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2Marek Vasut1-2/+2
[ Upstream commit 4b5fadef3fc2ab8863ffdf31eed6a745b1bf6e61 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06'] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2Marek Vasut1-2/+0
[ Upstream commit 28b9a4679d8074512f12967497c161b992eb3b75 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells' arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variantDmitry Osipenko1-1/+1
[ Upstream commit c4dd6066bc304649e3159f1c7a08ece25d537e00 ] The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator. Both regulators are always-on, nevertheless the DT model needs to be corrected, fix it. Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-treesDmitry Osipenko8-8/+8
[ Upstream commit 5f45da704de425d74abd75feaa928fc8a3df03ba ] All Tegra boards which use WM8903 audio codec are specifying a wrong polarity for the headphones detection GPIO. The kernel driver hardcodes the polarity to active-low, which is the correct polarity, so we can fix the device-trees safely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: OMAP2+: Replace underscores in sub-mailbox node namesSuman Anna8-20/+20
[ Upstream commit 9e7f5ee1137397def6580461e27e5efcb68183ee ] A number of sub-mailbox node names in various OMAP2+ dts files are currently using underscores. This is not adhering to the node name convention, fix all of these to use hiphens. These nodes are already using the prefix mbox, so they will be in compliance with the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am335x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko5-6/+6
[ Upstream commit d7d30b8fcd111e9feb171023c0e0c8d855582dcb ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-2/+5
[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-5/+4
[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE valueOleksij Rempel1-0/+2
[ Upstream commit 723de6a4126b2474a8106e943749e1554012dad6 ] Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix orientation of accelerometerLinus Walleij1-0/+3
[ Upstream commit 4beba4011995a2c44ee27e1d358dc32e6b9211b3 ] This adds a mounting matrix to the accelerometer on the TVK1281618 R3. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel5-5/+5
[ Upstream commit 4917b702818872fdf2a9973705af3aa7d3d1f19e ] Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix interrupt cellsSebastian Reichel2-24/+24
[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ] Fix interrupt cells in DT AB8500/AB8505 source files. The compiled DTB files will stay the same. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_infoJonathan Neuschäfer1-2/+2
[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ] The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c, is imx5_cpu_suspend_info. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6: phyFLEX: Fix UART hardware flow controlPrimoz Fiser1-2/+3
[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: Hurricane 2: Fix NAND nodes namesRafał Miłecki1-1/+1
[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM63xx: Fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: NSP: dts: fix NAND nodes namesRafał Miłecki9-17/+17
[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: Cygnus: dts: fix NAND nodes namesRafał Miłecki4-7/+7
[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: brcmstb: dts: fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3288Elaine Zhang1-4/+4
[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3188Elaine Zhang1-3/+3
[ Upstream commit d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix power-controller node names for rk3066aElaine Zhang1-3/+3
[ Upstream commit f2948781a72f0d8cf2adf31758c357f2f35e6c79 ] Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix IOMMU nodes properties on rk322xBenjamin Gaignard1-7/+3
[ Upstream commit 6b023929666f0be5df75f5e0278d1b70effadf42 ] Add '#" to iommu-cells properties. Remove useless interrupt-names properties Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix the timer clocks orderEzequiel Garcia2-6/+6
[ Upstream commit 7b46d674ac000b101fdad92cf16cc11d90b72f86 ] Fixed order is the device-tree convention. The timer driver currently gets clocks by name, so no changes are needed there. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288Johan Jonker2-2/+2
[ Upstream commit dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ] A test with the command below aimed at powerpc generates notifications in the Rockchip ARM tree. Fix pinctrl "sleep" nodename by renaming it to "suspend" for rk3036-kylin and rk3288 make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: Fix thermal sensor cells o rk322xEzequiel Garcia1-1/+1
[ Upstream commit d5c24e20daf09587cbc221d40be1ba92673e8d94 ] The number of cells to be used with a thermal sensor specifier must be "1". Fix this. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210506175514.168365-2-ezequiel@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: gemini: add device_type on pciCorentin Labbe1-0/+1
[ Upstream commit 483f3645b3f7acfd1c78a19d51b80c0656161974 ] Fixes DT warning on pci node by adding the missing device_type. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: gemini: rename mdio to the right nameCorentin Labbe5-5/+5
[ Upstream commit fc5b59b945b546e27977e99a5ca6fe61179ff0d2 ] ethernet-phy is not the right name for mdio, fix it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recoveryChristoph Niedermaier1-3/+33
[ Upstream commit ddc873cd3c0af4faad6a00bffda21c3f775126dd ] The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problemsChristoph Niedermaier1-0/+1
[ Upstream commit e2bdd3484890441b9cc2560413a86e8f2aa04157 ] To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: imx6q-dhcom: Fix ethernet reset time propertiesChristoph Niedermaier1-2/+2
[ Upstream commit c016c26c1631f539c652b5d82242a3ca402545c1 ] Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-2/+2
[ Upstream commit 9b11fec7345f21995f4ea4bafb0e108b9a620238 ] ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shemaAswath Govindraju1-1/+1
[ Upstream commit 414bfe1d26b60ef20b58e36efd5363188a694bab ] ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: dra7: Fix duplicate USB4 target module nodeGowtham Tammana5-78/+50
[ Upstream commit 78b4b165280d3d70e7a217599f0c06a4c0bb11f9 ] With [1] USB4 target-module node got defined in dra74x.dtsi file. However, the earlier definition in [2] was not removed, and this duplication of the target module is causing boot failure on dra74 variant boards - dra7-evm, dra76-evm. USB4 is only present in DRA74x variants, so keeping the entry in dra74x.dtsi and removing it from the top level interconnect hierarchy dra7-l4.dtsi file. This change makes the USB4 target module no longer visible to AM5718, DRA71x and DRA72x so removing references to it in their respective dts files. [1]: commit c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") [2]: commit 549fce068a311 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data") Fixes: c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") Signed-off-by: Gowtham Tammana <g-tammana@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: BCM5301X: Fixup SPI bindingRafał Miłecki1-9/+9
[ Upstream commit d5aede3e6dd1b8ca574600a1ecafe1e580c53f2f ] 1. Reorder interrupts 2. Fix typo: s/spi_lr_overhead/spi_lr_overread/ 3. Rename node: s/spi-nor@0/flash@0/ This fixes: arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed: ['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected) 'mspi_done' was expected 'spi_l1_intr' was expected 'mspi_halted' was expected 'spi_lr_fullness_reached' was expected 'spi_lr_session_aborted' was expected 'spi_lr_impatient' was expected 'spi_lr_session_done' was expected 'spi_lr_overread' was expected From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$' From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoMMarek Vasut1-1/+7
[ Upstream commit 1cebcf9932ab76102e8cfc555879574693ba8956 ] The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be enabled when the nRST is toggled according to datasheet Microchip LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset: " A Hardware reset is asserted by driving the nRST input pin low. When driven, nRST should be held low for the minimum time detailed in Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page 59 to ensure a proper transceiver reset. During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal. " This is accidentally fulfilled in the current setup, where ETHCK_K is used to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock, that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then the PHY reset toggles. However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN clock are supplied by some other clock source than ETHCK_K or in case ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would be kept disabled, while ETHRX clock would be enabled, so the PHY would not be receiving XTAL1/CLKIN clock and the reset would fail. Improve the DT by adding the PHY clock phandle into the PHY node, which then also requires moving the PHY reset GPIO specifier in the same place and that then also requires correct PHY reset GPIO timing, so add that too. A brief note regarding the timing, the datasheet says the reset should stay asserted for at least 100uS and software should wait at least 200nS after deassertion. Set both delays to 500uS which should be plenty. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoMMarek Vasut1-0/+2
[ Upstream commit 516728273ddfbf51b3d0fcaac05d26e299a7b456 ] On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be used e.g. to detect cable insertion and removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: r8a7779, marzen: Fix DU clock namesGeert Uytterhoeven2-1/+2
[ Upstream commit 6ab8c23096a29b69044209a5925758a6f88bd450 ] "make dtbs_check" complains: arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected Change the first clock name to match the DT bindings. This has no effect on actual operation, as the Display Unit driver in Linux does not use the first clock name on R-Car H1, but just grabs the first clock. Fixes: 665d79aa47cb3983 ("ARM: shmobile: marzen: Add DU external pixel clock to DT") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-modeSalvatore Bonaccorso1-1/+1
[ Upstream commit b19d3479f25e8a0ff24df0b46c82e50ef0f900dd ] Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the Orange Pi Plus board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Reported-by: "B.R. Oake" <broake@mailfence.com> Reported-by: Vagrant Cascadian <vagrant@reproducible-builds.org> Link: https://bugs.debian.org/988574 Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210524122111.416885-1-carnil@debian.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4Krzysztof Kozlowski1-1/+1
[ Upstream commit fd2f1717966535b7d0b6fe45cf0d79e94330da5f ] There is no "max_brightness" property as pointed out by dtschema: arch/arm/boot/dts/exynos5422-odroidxu4.dt.yaml: led-controller: led-1: 'max-brightness' is a required property Fixes: 6658356014cb ("ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210505135941.59898-5-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 07:30:05 +0000