summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2025-03-17Merge tag 'soc-fixes-6.14-2' of ↵Linus Torvalds8-24/+22
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "The majority of these last fixes are for devicetree files. These address two important regressions for the Qualcomm SMMU and the Raspberry Pi 4 USB controller, as well as a larger number of patches fixing minor mistakes in board specific files for Rockchips, i.MX, starfive and broadcom. The non-DT changes are - A fix for an old boot regression on Renesas shmobile chips - Another boot time regression for for the Qualcomm PDR SoC driver, among a few other Qualcomm firmware driver fixes for efivars and tzmem - Minor Kconfig fixes for davinci and OMAP1 - Minor code fixes for sparx5 reset controllers, OMAP memory controller, i.MX SCU, cpufreq and SoC drivers and a Hisilicon SoC driver - One more update to the Asahi maintainers, adding Neal Gompa as a reviewer" * tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XX soc: hisilicon: kunpeng_hccs: Fix incorrect string assembly memory: omap-gpmc: drop no compatible check reset: mchp: sparx5: Fix for lan966x ARM: shmobile: smp: Enforce shmobile_smp_* alignment MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support MAINTAINERS: Add apple-spi driver & binding files arm64: dts: rockchip: slow down emmc freq for rock 5 itx ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200 ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300 ARM: dts: bcm2711: Don't mark timer regs unconfigured ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1 arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S arm64: dts: bcm2712: PL011 UARTs are actually r1p5 ARM: dts: bcm2711: PL011 UARTs are actually r1p5 ...
2025-03-17arm: Rely on generic printing of preemption modelSebastian Andrzej Siewior1-9/+2
__die() invokes later __show_regs() -> show_regs_print_info() which prints the current preemption model. Remove it from the initial line. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20250314160810.2373416-4-bigeasy@linutronix.de
2025-03-16arm/pgtable: remove duplicate included header fileThorsten Blum1-3/+2
The header file asm-generic/pgtable-nopud.h is included whether CONFIG_MMU is defined or not. Include it only once before the #ifndef/#else/#endif preprocessor directives and remove the following make includecheck warning: asm-generic/pgtable-nopud.h is included more than once Link: https://lkml.kernel.org/r/20250219112403.3959-2-thorsten.blum@linux.dev Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-15crypto: skcipher - Make skcipher_walk src.virt.addr constHerbert Xu1-1/+1
Mark the src.virt.addr field in struct skcipher_walk as a pointer to const data. This guarantees that the user won't modify the data which should be done through dst.virt.addr to ensure that flushing is done when necessary. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-03-15crypto: scatterwalk - Change scatterwalk_next calling conventionHerbert Xu1-4/+3
Rather than returning the address and storing the length into an argument pointer, add an address field to the walk struct and use that to store the address. The length is returned directly. Change the done functions to use this stored address instead of getting them from the caller. Split the address into two using a union. The user should only access the const version so that it is never changed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-03-14Merge tag 'imx-dt-6.15' of ↵Arnd Bergmann45-91/+1301
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.15: - New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6 apalis/colibri v1.2, i.MX28 based btt3 - A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel, ordering DT properties, correcting 3.3V supply, adding partitions child node to spi-nor, etc. - A bunch of changes from Fabio Estevam to fix dt-schema warnings on various boards - Other small and random changes * tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) ARM: dts: apalis/colibri-imx6: Add support for v1.2 ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS ARM: dts: imx6ul: Add Variscite Concerto board support ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support ARM: dts: vf610-colibri: Remove compatible from SoM dtsi ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node ARM: dts: imx53-mba53: Fix the PCA9554 compatible ARM: dts: imx31: Use nand-controller as node name ARM: dts: vfxxx: Fix the order of the DMA entries ARM: dts: tqma7: Add partitions subnode to spi-nor ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor ARM: dts: tqma6ul: Add partitions subnode to spi-nor ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor ARM: dts: imx6ul-tqma6ul: Order DT properties ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V ARM: dts: imx6qdl-tqma6: Order DT properties ARM: dts: imx7d-sdb: Complete WM8960 power supplies ... Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'davinci-updates-for-v6.15-rc1' of ↵Arnd Bergmann1-5/+5
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/dt TI DaVinci updates for v6.15-rc1 - make GPIO hog names conform to bindings * tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: ARM: dts: ti: davinci: Align GPIO hog name with bindings Link: https://lore.kernel.org/r/20250311115720.40053-1-brgl@bgdev.pl Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XXDavid Lechner1-0/+1
Chips in the DA850 family need to have ARCH_DAVINCI_DA8XX to be selected in order to enable some peripheral drivers. This was accidentally removed in a previous commit. Fixes: dec85a95167a ("ARM: davinci: clean up platform support") Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'renesas-fixes-for-v6.14-tag1' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v6.14 - Fix possible misalignment breaking SMP bring-up. * tag 'renesas-fixes-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: smp: Enforce shmobile_smp_* alignment Link: https://lore.kernel.org/r/cover.1741785482.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-14Merge tag 'arm-soc/for-6.14/devicetree-fixes-part2' of ↵Arnd Bergmann3-10/+8
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 6.14, please pull the following: - Chester fixes the switch port assignments on the ASUS RT-AC3200 and RT-AC5300 routers - Phil removes a Device Tree property flagging the BCM2711 ARM timers as not being configured which would have prevented the use of vDSO on the Pi 4 running a 32-bit kernel * tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200 ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300 ARM: dts: bcm2711: Don't mark timer regs unconfigured Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-12ARM: shmobile: smp: Enforce shmobile_smp_* alignmentGeert Uytterhoeven1-0/+1
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU bring-up fails: smp: Bringing up secondary CPUs ... CPU1: failed to come online CPU2: failed to come online CPU3: failed to come online smp: Brought up 1 node, 1 CPU Fix this by adding the missing alignment directive. Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss") Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be Cc: stable@vger.kernel.org
2025-03-12Backmerge tag 'v6.14-rc6' into drm-nextDave Airlie1-12/+25
This is a backmerge from Linux 6.14-rc6, needed for the nova PR. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-03-11ARM: dts: stm32: Add Plymovent AQM devicetreeOleksij Rempel2-0/+377
Introduce the devicetree for the Plymovent AQM board (stm32mp151c-plyaqm), based on the STM32MP151 SoC. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-03-11ARM: dts: stm32: Add pinmux groups for Plymovent AQM boardOleksij Rempel1-0/+292
Add pinmux groups required for the Plymovent AQM board. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20250305131425.1491769-4-o.rempel@pengutronix.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-03-11ARM: dts: apalis/colibri-imx6: Add support for v1.2Ernest Van Hoecke12-0/+222
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller, which is EOL, with the TLA2024 ADC and AD7879 touch controller. Accurately describe the new hardware. v1.1 of these SoMs is still described by the following DTSI files: imx6qdl-apalis.dtsi imx6qdl-colibri.dtsi v1.2 is now supported by a DTSI that modifies v1.1: imx6qdl-apalis-v1.2.dtsi imx6qdl-colibri-v1.2.dtsi For each carrier board using these modules, a new DTS file was added that includes the v1.1 DTS and modifies it with this v1.2 DTSI. The original DTS can be used for modules up to and including v1.1. Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: apalis/colibri-imx6: Enable STMPE811 TSErnest Van Hoecke2-2/+0
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is part of the SOM. It's self contained within it, therefore, disabling it is not the correct default behavior. Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6ul: Add Variscite Concerto board supportAntonin Godard2-0/+321
Add support for the Variscite Concerto Carrier Board with: - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display (not configured) - USB Host + USB OTG Connector - 10/100 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - S-ATA - On-board DMIC Product Page: https://www.variscite.com/product/single-board-computers/concerto-board This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Signed-off-by: Antonin Godard <antonin.godard@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM supportAntonin Godard1-0/+233
Add support for the Variscite VAR_SOM-MX6UL SoM with: - NXP i.MX6 UltraLite SoC - 128–1024 MB DDR3L - 8–128 GB eMMC - 128–512 MB SLC NAND - Camera Interface - LVDS / Parallel RGB interfaces (not configured) - Touch controller (not configured) - Ethernet RMII interface (not configured) - On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured) - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec (not configured) - S/PDIF interface (not configured) Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why some of the features above are mentioned as "not configured" (I couldn't test them). This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Signed-off-by: Antonin Godard <antonin.godard@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: vf610-colibri: Remove compatible from SoM dtsiFrancesco Dolcini1-1/+0
The SoM cannot be used standalone, this compatible is invalid and it is always overwritten when this .dtsi file is included, remove it therefore. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsiFrancesco Dolcini2-2/+0
The SoM cannot be used standalone, this compatible is invalid and it is always overwritten when this .dtsi file is included, remove it therefore. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: imx: mark imx53_suspend_sz as unusedArnd Bergmann1-1/+1
Unused 'static const' variables cause a warning when building with W=1, and imx53_suspend_sz has a definition for this as an alternative when CONFIG_SUSPEND is disabled: In file included from arch/arm/mach-imx/cpu.c:9: arch/arm/mach-imx/common.h:101:18: error: 'imx53_suspend_sz' defined but not used [-Werror=unused-const-variable=] It's still referenced though, so mark it as __maybe_unused, so the one user can address the dummy copy and other files that include the header don't produce a warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 nodeMax Merchel2-3/+2
TQMa6UL1 has only one FEC which needs to be disabled as one of the last steps. imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the defaults from imx6ul.dtsi will be applied again. Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees") Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx53-mba53: Fix the PCA9554 compatibleFabio Estevam1-1/+1
gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible to fix the following dt-schema warning: failed to match any schema with compatible: ['pca9554'] Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx31: Use nand-controller as node nameFabio Estevam1-1/+1
According to mxc-nand.yaml, the correct node name must be 'nand-controller'. Change it accordingly to fix the following dt-schema warning: $nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: vfxxx: Fix the order of the DMA entriesFabio Estevam1-9/+8
According to fsl,dspi.yaml the expected order for describing the dmas and dma-names properties is "tx" first, followed by "rx". Adjust it acordingly to fix the following dt-schema warnings: spi@4002c000: dma-names:0: 'tx' was expected spi@4002c000: dma-names:1: 'rx' was expected Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: tqma7: Add partitions subnode to spi-norMarkus Niebel1-0/+6
The bootloader adds MTD partitions in this subnode if present. Add an empty partitions node which the bootloader will fill with configured MTD partitions. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx7-tqma7: Add vcc-supply for spi-norAlexander Stein1-0/+1
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: tqma6ul: Add partitions subnode to spi-norMarkus Niebel1-2/+6
The bootloader adds MTD partitions in this subnode if present, or in the spi-nor node itself otherwise. Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml. Fix all this by adding an empty partitions node which the bootloader will fill with configured MTD partitions. Remove the deprecated properties as well. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-norAlexander Stein1-0/+1
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6ul-tqma6ul: Order DT propertiesAlexander Stein1-2/+2
'compatible' and 'reg' are put first. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-norMarkus Niebel1-2/+6
The bootloader may add MTD partitions in this subnode if present. Add an empty partitions node which the bootloader will fill with configured MTD partitions. Remove #size-cells from MTD node because this is deprecated. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supplyMarkus Niebel3-15/+6
This matches the real hardware and allows to remove the virtual 3.3V regulator. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3VMarkus Niebel1-1/+1
This is a fixed 3.3V rail supplying several hardware on SOM. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-11ARM: dts: imx6qdl-tqma6: Order DT propertiesAlexander Stein1-1/+1
'compatible' and 'reg' are put first. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-03-10lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32CEric Biggers9-9/+0
All modules that need CONFIG_LIBCRC32C already select it, so there is no need to bother users about the option. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250304230712.167600-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-03-10lib/crc: remove unnecessary prompt for CONFIG_CRC7Eric Biggers5-5/+0
All modules that need CONFIG_CRC7 already select it, so there is no need to bother users about the option. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250304230712.167600-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-03-10ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 boardMarek Vasut1-2/+28
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200. LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep both regulators always enabled to make sure both the carrier board and the expansion connector is always powered on and supplied with correct voltage. Describe ST33TPHF2XSPI TPM 2.0 chip interrupt and reset lines. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20250302152605.54792-1-marex@denx.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-03-10ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2Dario Binacchi1-1/+1
Replace the number 2 with the appropriate numerical constant defined in dt-bindings/interrupt-controller/irq.h. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/r/20250310122402.8795-1-dario.binacchi@amarulasolutions.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-03-10ARM: module: Use RCU in all users of __module_text_address().Sebastian Andrzej Siewior1-3/+1
__module_text_address() can be invoked within a RCU section, there is no requirement to have preemption disabled. Replace the preempt_disable() section around __module_text_address() with RCU. Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20250108090457.512198-17-bigeasy@linutronix.de Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
2025-03-08ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200Chester A. Unal1-4/+4
After using the device for a while, Tom reports that he initially described the switch port labels incorrectly. Apparently, ASUS's own firmware also describes them incorrectly. Correct them to what is seen on the chassis. Reported-by: Tom Brautaset <tbrautaset@gmail.com> Fixes: b116239094d8 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200") Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com> Link: https://lore.kernel.org/r/20250304-for-broadcom-fix-rt-ac3200-switch-ports-v1-1-7e249a19a13e@arinc9.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-03-08ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300Chester A. Unal1-4/+4
After using the device for a while, Tom reports that he initially described the switch port labels incorrectly. Correct them. Reported-by: Tom Brautaset <tbrautaset@gmail.com> Fixes: 961dedc6b4e4 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300") Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com> Link: https://lore.kernel.org/r/20250303-for-broadcom-fix-rt-ac5300-switch-ports-v1-1-e058856ef4d3@arinc9.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-03-08ARM: dts: bcm2711: Don't mark timer regs unconfiguredPhil Elwell1-2/+0
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs didn't configured the ARM architectural timer. This firmware issue has been fixed in 2020, which gave users enough time to update their system. So drop this property to allow the use of the vDSO version of clock_gettime. Link: https://github.com/raspberrypi/tools/pull/113 Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-03-07ARM: dts: marvell: armada: Align GPIO hog name with bindingsKrzysztof Kozlowski2-5/+5
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-07ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindingsKrzysztof Kozlowski1-2/+2
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warning: kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-06ARM: tegra: tf101: Add al3000a illuminance sensor nodeSvyatoslav Ryhel1-0/+11
Bind al3000a illuminance sensor found in ASUS TF101 Tested-by: Robert Eckelmann <longnoserob@gmail.com> Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250217140336.107476-4-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-06ARM: tegra: Add DSI-A and DSI-B nodes on Tegra124Svyatoslav Ryhel1-0/+40
Bind DSI devices and MIPI calibration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250226105615.61087-6-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-06ARM: tegra: Add HDA node on Tegra114Svyatoslav Ryhel1-0/+15
Add HDA device binding. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250226105615.61087-5-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-06ARM: tegra: Add ARM PMU node on Tegra114Svyatoslav Ryhel1-4/+13
Add ARM PMU node for Tegra114 like it is done for Tegra30 and Tegra124. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250226105615.61087-4-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-06ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114Svyatoslav Ryhel1-1/+1
PLLD is usually used as parent clock for internal video devices, like DSI for example, while PLLD2 is used as parent for HDMI. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-06Merge tag 'renesas-dts-for-v6.15-tag1' of ↵Arnd Bergmann15-10/+53
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.15 - Add support for the second and third Ethernet interfaces on the Gray Hawk Single development board, - Add Image Signal Processor helper block (FCPVX and VSPX) support for the R-Car V3U and V4M SoCs, - Add Watchdog and System Controller support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II EVK development board, - Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi boards, - Add support for the spare UART and PMOD serial ports on the RZ/G3S SMARC Carrier II board, - Add a CPU Operating Performance Points table for the RZ/G3S SoC, - Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) ARM: dts: renesas: r9a06g032: Fix UART dma channel order arm64: dts: renesas: rzg2: Add boot phase tags arm64: dts: renesas: rcar: Add boot phase tags ARM: dts: renesas: rcar-gen2: Add boot phase tags arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture arm64: dts: renesas: Add initial support for MYIR Remi Pi arm64: dts: renesas: r9a08g045: Add OPP table arm64: dts: renesas: r9a09g057: Enable SYS node arm64: dts: renesas: r9a09g047: Add SYS node arm64: dts: renesas: r9a08g045: Enable SYS node arm64: dts: renesas: r8a779f0: Disable rswitch ports by default arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1 arm64: dts: renesas: rzg3s-smarc: Enable SCIF3 arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches arm64: dts: renesas: r8a779g0: Restore sort order arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch arm64: dts: renesas: s4sk: Access rswitch ports via phandles arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles ... Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-23 22:14:10 +0000