summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2024-09-02ARM: mvebu: Warn about memory chunks too small for DDR trainingUwe Kleine-König1-0/+3
For each memory region the first 10K are reserved for DDR training. Emit a warning if the area happens to be smaller than these 10K. This should not happen, but if it does this message simplifies diagnosing the problem. This fixes a W=1 compiler error: arch/arm/mach-mvebu/board-v7.c: In function ‘mvebu_scan_mem’: arch/arm/mach-mvebu/board-v7.c:84:27: error: variable ‘size’ set but not used [-Werror=unused-but-set-variable] 84 | u64 base, size; | ^~~~ Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-09-02gpiolib: legacy: Kill GPIOF_DIR_* definitionsAndy Shevchenko1-2/+1
Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions by killing those GPIOF_DIR_* completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240828142554.2424189-3-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-09-02gpiolib: legacy: Kill GPIOF_INIT_* definitionsAndy Shevchenko1-2/+1
Besides the fact that (old) drivers use wrong definitions, e.g., GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy definitions by killing those GPIOF_INIT_* completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-09-02ARM: versatile: fix OF node leak in CPUs prepareKrzysztof Kozlowski1-0/+1
Machine code is leaking OF node reference from of_find_matching_node() in realview_smp_prepare_cpus(). Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/20240826054934.10724-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-09-01crypto: arm/xor - add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
Patch series "treewide: add missing MODULE_DESCRIPTION() macros". Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing"), a module without a MODULE_DESCRIPTION() will result in a warning when built with make W=1. Recently, multiple developers have been eradicating these warnings treewide, and I personally submitted almost 300 patches over the past few months. Almost all of my patches landed by 6.11-rc1, either by being merged in a 6.10-rc or by being merged in the 6.11 merge window. However, a few of my patches did not land. This patch (of 5): With ARCH=arm and CONFIG_KERNEL_MODE_NEON=y, make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm/lib/xor-neon.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-0-7094088076c8@quicinc.com Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-1-7094088076c8@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Alistar Popple <alistair@popple.id.au> Cc: Andrew Jeffery <andrew@codeconstruct.com.au> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eddie James <eajames@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nouveau <nouveau@lists.freedesktop.org> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-01mm: turn USE_SPLIT_PTE_PTLOCKS / USE_SPLIT_PTE_PTLOCKS into Kconfig optionsDavid Hildenbrand1-3/+3
Patch series "mm: split PTE/PMD PT table Kconfig cleanups+clarifications". This series is a follow up to the fixes: "[PATCH v1 0/2] mm/hugetlb: fix hugetlb vs. core-mm PT locking" When working on the fixes, I wondered why 8xx is fine (-> never uses split PT locks) and how PT locking even works properly with PMD page table sharing (-> always requires split PMD PT locks). Let's improve the split PT lock detection, make hugetlb properly depend on it and make 8xx bail out if it would ever get enabled by accident. As an alternative to patch #3 we could extend the Kconfig SPLIT_PTE_PTLOCKS option from patch #2 -- but enforcing it closer to the code that actually implements it feels a bit nicer for documentation purposes, and there is no need to actually disable it because it should always be disabled (!SMP). Did a bunch of cross-compilations to make sure that split PTE/PMD PT locks are still getting used where we would expect them. [1] https://lkml.kernel.org/r/20240725183955.2268884-1-david@redhat.com This patch (of 3): Let's clean that up a bit and prepare for depending on CONFIG_SPLIT_PMD_PTLOCKS in other Kconfig options. More cleanups would be reasonable (like the arch-specific "depends on" for CONFIG_SPLIT_PTE_PTLOCKS), but we'll leave that for another day. Link: https://lkml.kernel.org/r/20240726150728.3159964-1-david@redhat.com Link: https://lkml.kernel.org/r/20240726150728.3159964-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-02ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmuxMarkus Niebel1-9/+0
Since the muxing is described already in imx6qdl-tqma6 can be reused by this variant. No functional change. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensorMarkus Niebel2-2/+2
Use national,lm75a to specify exact variant used. This should cause no functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensorMarkus Niebel2-4/+4
Use national,lm75a to specify exact variant used. This should cause no functional changes. While at it change node name to 'temperature-sensor@48' to describe the function of the IC. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6bMarkus Niebel2-14/+16
Move the pinmux entries to the variant where they are actual used. No functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7d-sdb: align pin config nodes with bindingsKrzysztof Kozlowski2-323/+319
Bindings expect pin configuration nodes in pinctrl to match certain naming and not be part of another fake node: imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp" prefix. Diff looks big but this should have no functional impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7: align pin config nodes with bindingsKrzysztof Kozlowski5-19/+19
Bindings expect pin configuration nodes in pinctrl to match certain naming: imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl propertyKrzysztof Kozlowski1-1/+1
There is no "fsl,phy" property in pin controller pincfg nodes: imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: imx: Annotate imx7d_enet_init() as __initNathan Chancellor1-1/+1
After a recent LLVM change [1] that deduces __cold on functions that only call cold code (such as __init functions), there is a section mismatch warning from imx7d_enet_init(), which got moved to .text.unlikely. as a result of that optimization: WARNING: modpost: vmlinux: section mismatch in reference: imx7d_enet_init+0x20 (section: .text.unlikely.) -> imx7d_enet_clk_sel (section: .init.text) Drop the inline keyword (which does not guarantee inlining) and replace it with __init, as imx7d_enet_init() is only called from __init code, which clears up the warning. Link: https://github.com/llvm/llvm-project/commit/6b11573b8c5e3d36beee099dbe7347c2a007bf53 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx6: update spdif sound card node propertiesElinor Montmasson12-28/+104
The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-31ARM: dts: imx28-apx4devkit: Fix the regulator descriptionFabio Estevam1-13/+7
The regulator should not be placed under simple-bus. Remove it from simple-bus to fix the following dt-schema warnings: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' regulators: #size-cells:0:0: 0 is not one of [1, 2] regulators: regulator@0:reg:0: [0] is too short regulators: 'ranges' is a required property Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-31ARM: dts: microchip: sama7g5: Fix RTT clockClaudiu Beznea1-1/+1
According to datasheet, Chapter 34. Clock Generator, section 34.2, Embedded characteristics, source clock for RTT is the TD_SLCK, registered with ID 1 by the slow clock controller driver. Fix RTT clock. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-30firmware/smccc: Call arch-specific hook on discovering KVM servicesMarc Zyngier1-0/+2
arm64 will soon require its own callback to initialise services that are only available on this architecture. Introduce a hook that can be overloaded by the architecture. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240830130150.8568-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2024-08-29ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1Fabio Estevam1-2/+2
There is no DAC connected to the SPI bus of the Elgin RV1108 R1 board. There is a JG10309-01 LCD controlled via SPI though. Properly describe it by adding the "elgin,jg10309-01" compatible string. Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-arm-kernel/20240717-parrot-malt-83cc04bf6b36@spud/ Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240829113158.3324928-3-festevam@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-29dmaengine: Add dma router for pl08x in LPC32XX SoCPiotr Wojtaszczyk1-0/+1
LPC32XX connects few of its peripherals to pl08x DMA thru a multiplexer, this driver allows to route a signal request line thru the multiplexer for given peripheral. Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> Link: https://lore.kernel.org/r/20240628152022.274405-1-piotr.wojtaszczyk@timesys.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29ARM: tegra: Wire up two front panel LEDs on TrimSliceTomasz Maciej Nowak1-5/+25
Pins responsible for controlling these LEDs need to have tristate control removed if we want them as GPIOs. This change aligns with pinmux configuration of "dte" pin group in downstream kernel[1]. These LEDs had no function assigned on vendor kernel and there is no label on the case, the only markings are on PCB which are part of node names (ds1 marking is on power LED controlled by PMIC), so generic term is assigned as the function. 1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45 Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Configure USBSvyatoslav Ryhel1-4/+4
Fixes issue when resuming after suspend made USB in peripheral mode inaccessible. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use dedicated backlight regulatorSvyatoslav Ryhel1-2/+1
Downstream kernel states that backlight has no actual enable GPIO and uses fixed regulator. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Re-group GPIO keysSvyatoslav Ryhel1-8/+12
Group GPIO keys into keys and switches. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind WIFI SDIO and EMMCSvyatoslav Ryhel1-2/+55
Add MMC nodes configuration along with WIFI binding to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Complete sound bindingsSvyatoslav Ryhel1-7/+17
With these changes sound works, only UCM configs are needed for complete support. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Adjust sensors nodesSvyatoslav Ryhel1-3/+18
Complete and adjust magnetometer, thermal sensor, motion tracker, power and light sensors according to available sources. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add Bluetooth nodeSvyatoslav Ryhel1-1/+27
Add serial node along with bluetooth node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add HDMI bindingsSvyatoslav Ryhel1-2/+31
Add HDMI nodes to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Correct and complete PMIC and PMC bindingsSvyatoslav Ryhel1-68/+195
Add missing parts of PMIC complex, extend PMC binding and add missing fixed regulators. Additionally, refresh naming to better reflect regulator purpose. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind VDE deviceSvyatoslav Ryhel1-0/+6
Add Video Decoder Engine node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use unimomentary pinmux setupSvyatoslav Ryhel1-108/+993
Mimic original downstream board behavior to set up all pinmux at once. Per-device pinmux is good but we have no complete board schematics to allow such luxury. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-28Merge tag 'imx-fixes-6.11' of ↵Arnd Bergmann1-6/+6
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.11: - One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962 audio support - One pinctrl property typo fix for imx8mm-phygate - One layerscape fix from Krzysztof Kozlowski to get thermal nodes correct name length - A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA alloc-ranges and the other on SD-Card cd-gpios typo - One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match the HW design - A couple of imx95 fixes from Peng Fan, one to correct a55 power domains and the other to correct L3Cache cache-sets - One tqma9352 watchdog reset fix from Sascha Hauer - One imx93 change from Shenwei Wang to fix the default value for STMMAC EQOS snps,clk-csr * tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mm-phygate: fix typo pinctrcl-0 arm64: dts: imx95: correct L3Cache cache-sets arm64: dts: imx95: correct a55 power-domains arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design arm64: dts: imx93: update default value for snps,clk-csr arm64: dts: freescale: tqma9352: Fix watchdog reset arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962 arm64: dts: layerscape: fix thermal node names length Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28Merge tag 'omap-for-v6.11/fixes-signed' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes OMAP fixes for v6.11-rc - omap3-n900: fix accelerometer orientation * tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap3-n900: correct the accelerometer orientation Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28ARM: dts: rockchip: Add vpu nodes for RK3128Alex Bee1-0/+24
Add nodes for the vpu and it's attached iommu which are both part of the RK3128_PD_VIDEO powerdomain. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20240523185633.71355-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-28ARM: dts: imx7-mba7: improve compatible for LM75 temp sensorMarkus Niebel1-1/+1
Use national,lm75a to specify exact variant used. This should cause no functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-28ARM: dts: imx7-mba7: add iio-hwmon supportMarkus Niebel1-0/+6
Enable IIO hwmon support for ADC1 and ADC2. All channels are available on X23 (ADC2) and X24 (ADC1) of MBa7x. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-27ARM: dts: aspeed: catalina: Update io expander line namesPotin Lai1-2/+2
io_expander7 - P1-5: MCU_GPIO - P1-6: MCU_RST_N - P1-7: MCU_RECOVERY_N io_expander8 - P1-5: SEC_MCU_GPIO - P1-6: SEC_MCU_RST_N - P1-7: SEC_MCU_RECOVERY_N Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-27ARM: dts: aspeed: catalina: Add pdb cpld io expanderPotin Lai1-0/+131
Add more IO expanders which are emulated by the PDB CPLD. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-24ARM: dts: microchip: sam9x60: Fix rtc/rtt clocksAlexander Dahl1-2/+2
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator or slow rc oscillator. The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt") Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com [claudiu.beznea: removed () around the last commit description paragraph, removed " in front of "timing domain slow clock", described that TD_SLCK can also be sourced from slow rc oscillator] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO nodeManikandan Muralidharan1-4/+4
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from sam9x60 SoC DT. Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string to find the number of active GPIO banks and identify the pinmux nodes.It should used as a constant across all DT for GPIO node banks that uses PIO3 based pinctrl driver Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodesManikandan Muralidharan5-5/+5
The driver data specific to each pinctrl GPIO bank compatible nodes are not the same and declaring additional compatible string as fallback has no specific purpose, hence, removing the additional compatible string from the pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux ↵Manikandan Muralidharan11-11/+11
controller The pinctrl subnodes that define the pin configuration of other devices under PIO3 pinmux controller are not simple memory mapped nodes.Ergo, change simple-bus to simple-mfd. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-24crypto: simd - Do not call crypto_alloc_tfm during registrationHerbert Xu2-2/+2
Algorithm registration is usually carried out during module init, where as little work as possible should be carried out. The SIMD code violated this rule by allocating a tfm, this then triggers a full test of the algorithm which may dead-lock in certain cases. SIMD is only allocating the tfm to get at the alg object, which is in fact already available as it is what we are registering. Use that directly and remove the crypto_alloc_tfm call. Also remove some obsolete and unused SIMD API. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-08-22ARM: dts: aspeed: harma: Remove pca9546Peter Yin1-31/+0
Remove pca9546 device from i2c bus 9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warningsPeter Yin1-6/+5
Revise spi-gpio node and property name and remove max-ngpios. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Enable mctp controllerPeter Yin1-0/+8
Enable the mctp controller in i2c9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add temperature devicePeter Yin1-0/+10
Add temperature device in i2c0 and i2c2. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com [andrew: Fixed 'deivce' typo in commit message] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add fru devicePeter Yin1-0/+25
Add Aegis fru device and gpio expander device in bus 11. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Remove multi-host propertyPeter Yin1-1/+0
Harma is single host, so remove multi-host property. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 15:26:00 +0000