summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2022-04-13powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bitKefeng Wang1-1/+5
commit ffa0b64e3be58519ae472ea29a1a1ad681e32f48 upstream. mpe: On 64-bit Book3E vmalloc space starts at 0x8000000000000000. Because of the way __pa() works we have: __pa(0x8000000000000000) == 0, and therefore virt_to_pfn(0x8000000000000000) == 0, and therefore virt_addr_valid(0x8000000000000000) == true Which is wrong, virt_addr_valid() should be false for vmalloc space. In fact all vmalloc addresses that alias with a valid PFN will return true from virt_addr_valid(). That can cause bugs with hardened usercopy as described below by Kefeng Wang: When running ethtool eth0 on 64-bit Book3E, a BUG occurred: usercopy: Kernel memory exposure attempt detected from SLUB object not in SLUB page?! (offset 0, size 1048)! kernel BUG at mm/usercopy.c:99 ... usercopy_abort+0x64/0xa0 (unreliable) __check_heap_object+0x168/0x190 __check_object_size+0x1a0/0x200 dev_ethtool+0x2494/0x2b20 dev_ioctl+0x5d0/0x770 sock_do_ioctl+0xf0/0x1d0 sock_ioctl+0x3ec/0x5a0 __se_sys_ioctl+0xf0/0x160 system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 The code shows below, data = vzalloc(array_size(gstrings.len, ETH_GSTRING_LEN)); copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN)) The data is alloced by vmalloc(), virt_addr_valid(ptr) will return true on 64-bit Book3E, which leads to the panic. As commit 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") does, make sure the virt addr above PAGE_OFFSET in the virt_addr_valid() for 64-bit, also add upper limit check to make sure the virt is below high_memory. Meanwhile, for 32-bit PAGE_OFFSET is the virtual address of the start of lowmem, high_memory is the upper low virtual address, the check is suitable for 32-bit, this will fix the issue mentioned in commit 602946ec2f90 ("powerpc: Set max_mapnr correctly") too. On 32-bit there is a similar problem with high memory, that was fixed in commit 602946ec2f90 ("powerpc: Set max_mapnr correctly"), but that commit breaks highmem and needs to be reverted. We can't easily fix __pa(), we have code that relies on its current behaviour. So for now add extra checks to virt_addr_valid(). For 64-bit Book3S the extra checks are not necessary, the combination of virt_to_pfn() and pfn_valid() should yield the correct result, but they are harmless. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add additional change log detail] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220406145802.538416-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13powerpc/secvar: fix refcount leak in format_show()Hangyu Hua1-3/+6
[ Upstream commit d601fd24e6964967f115f036a840f4f28488f63f ] Refcount leak will happen when format_show returns failure in multiple cases. Unified management of of_node_put can fix this problem. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220302021959.10959-1-hbh25y@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13powerpc: Set crashkernel offset to mid of RMA regionSourabh Jain2-4/+17
[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ] On large config LPARs (having 192 and more cores), Linux fails to boot due to insufficient memory in the first memblock. It is due to the memory reservation for the crash kernel which starts at 128MB offset of the first memblock. This memory reservation for the crash kernel doesn't leave enough space in the first memblock to accommodate other essential system resources. The crash kernel start address was set to 128MB offset by default to ensure that the crash kernel get some memory below the RMA region which is used to be of size 256MB. But given that the RMA region size can be 512MB or more, setting the crash kernel offset to mid of RMA size will leave enough space for the kernel to allocate memory for other system resources. Since the above crash kernel offset change is only applicable to the LPAR platform, the LPAR feature detection is pushed before the crash kernel reservation. The rest of LPAR specific initialization will still be done during pseries_probe_fw_features as usual. This patch is dependent on changes to paca allocation for boot CPU. It expect boot CPU to discover 1T segment support which is introduced by the patch posted here: https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13powerpc: dts: t104xrdb: fix phy type for FMAN 4/5Maxim Kiselev1-2/+2
[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ] T1040RDB has two RTL8211E-VB phys which requires setting of internal delays for correct work. Changing the phy-connection-type property to `rgmii-id` will fix this issue. Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc: Fix build errors with newer binutilsAnders Roxell3-9/+40
commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:1190: Error: unrecognized opcode: `stbcix' {standard input}:1433: Error: unrecognized opcode: `lwzcix' {standard input}:1453: Error: unrecognized opcode: `stbcix' {standard input}:1460: Error: unrecognized opcode: `stwcix' {standard input}:1596: Error: unrecognized opcode: `stbcix' ... Rework to add assembler directives [1] around the instruction. Going through them one by one shows that the changes should be safe. Like __get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(), which according to the name is specific to power9. And __raw_rm_read*() are only called in things that are powernv or book3s_hv specific. [1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo Cc: stable@vger.kernel.org Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> [mpe: Make commit subject more descriptive] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08powerpc/lib/sstep: Fix build errors with newer binutilsAnders Roxell1-0/+6
commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:10576: Error: unrecognized opcode: `stbcx.' {standard input}:10680: Error: unrecognized opcode: `lharx' {standard input}:10694: Error: unrecognized opcode: `lbarx' Rework to add assembler directives [1] around the instruction. The problem with this might be that we can trick a power6 into single-stepping through an stbcx. for instance, and it will execute that in kernel mode. [1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08powerpc/lib/sstep: Fix 'sthcx' instructionAnders Roxell1-1/+1
commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream. Looks like there been a copy paste mistake when added the instruction 'stbcx' twice and one was probably meant to be 'sthcx'. Changing to 'sthcx' from 'stbcx'. Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08powerpc/kasan: Fix early region not updated correctlyChen Jingwen1-2/+1
commit dd75080aa8409ce10d50fb58981c6b59bf8707d3 upstream. The shadow's page table is not updated when PTE_RPN_SHIFT is 24 and PAGE_SHIFT is 12. It not only causes false positives but also false negative as shown the following text. Fix it by bringing the logic of kasan_early_shadow_page_entry here. 1. False Positive: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50 Write of size 16 at addr f57f3be0 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1 Call Trace: [c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable) [c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300 [c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200 [c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0 [c80d1cc0] [c03018a4] memset+0x34/0x90 [c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50 [c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570 [c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0 [c80d1db0] [c2036580] init_sd+0xc4/0x1d0 [c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c [c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384 [c80d1ef0] [c0004b14] kernel_init+0x24/0x170 [c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64 Memory state around the buggy address: f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== 2. False Negative (with KASAN tests): ================================================================== Before fix: ok 45 - kmalloc_double_kzfree # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039 KASAN failure expected in "((volatile char *)area)[3100]", but none occurred not ok 46 - vmalloc_oob not ok 1 - kasan ================================================================== After fix: ok 1 - kasan Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08uaccess: fix type mismatch warnings from access_ok()Arnd Bergmann1-2/+2
[ Upstream commit 23fc539e81295b14b50c6ccc5baeb4f3d59d822d ] On some architectures, access_ok() does not do any argument type checking, so replacing the definition with a generic one causes a few warnings for harmless issues that were never caught before. Fix the ones that I found either through my own test builds or that were reported by the 0-day bot. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc: 8xx: fix a return value error in mpc8xx_pic_initHangyu Hua1-0/+1
[ Upstream commit 3fd46e551f67f4303c3276a0d6cd20baf2d192c4 ] mpc8xx_pic_init() should return -ENOMEM instead of 0 when irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue executing even if mpc8xx_pic_host is NULL. Fixes: cc76404feaed ("powerpc/8xx: Fix possible device node reference leak") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220223070223.26845-1-hbh25y@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc/sysdev: fix incorrect use to determine if list is emptyJakob Koschel1-2/+2
[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ] 'gtm' will *always* be set by list_for_each_entry(). It is incorrect to assume that the iterator value will be NULL if the list is empty. Instead of checking the pointer it should be checked if the list is empty. Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support") Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220228142434.576226-1-jakobkoschel@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bitMichael Ellerman1-1/+1
[ Upstream commit 2863dd2db23e0407f6c50b8ba5c0e55abef894f1 ] When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass -mcpu=powerpc64 to the compiler, even when we're building a 32-bit kernel. This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in the Makefile that was written before 32-bit supported GENERIC_CPU. Prior to that the else block only applied to 64-bit Book3E. The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big endian PowerPC ... architecture machine [type], with an appropriate, generic processor model assumed for scheduling purposes." It's unclear how that interacts with -m32, which we are also passing, although obviously -m32 is taking precedence in some sense, as the 32-bit kernel only contains 32-bit instructions. This was noticed by inspection, not via any bug reports, but it does affect code generation. Comparing before/after code generation, there are some changes to instruction scheduling, and the after case (with -mcpu=powerpc64 removed) the compiler seems more keen to use r8. Fix it by making the else case only apply to Book3E 64, which excludes 32-bit. Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220215112858.304779-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()Daniel Henrique Barboza1-1/+3
[ Upstream commit 749ed4a20657bcea66a6e082ca3dc0d228cbec80 ] Executing node_set_online() when nid = NUMA_NO_NODE results in an undefined behavior. node_set_online() will call node_set_state(), into __node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up doing a negative shift operation inside arch/powerpc/include/asm/bitops.h. This potential UB was detected running a kernel with CONFIG_UBSAN. The behavior was introduced by commit 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0"), where the check for nid > 0 was removed to fix a problem that was happening with nid = 0, but the result is that now we're trying to online NUMA_NO_NODE nids as well. Checking for nid >= 0 will allow node 0 to be onlined while avoiding this UB with NUMA_NO_NODE. Fixes: 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0") Reported-by: Ping Fang <pifang@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224182312.1012527-1-danielhb413@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc/perf: Don't use perf_hw_context for trace IMC PMUAthira Rajeev1-1/+5
[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ] Trace IMC (In-Memory collection counters) in powerpc is useful for application level profiling. For trace_imc, presently task context (task_ctx_nr) is set to perf_hw_context. But perf_hw_context should only be used for CPU PMU. See commit 26657848502b ("perf/core: Verify we have a single perf_hw_context PMU"). So for trace_imc, even though it is per thread PMU, it is preferred to use sw_context in order to be able to do application level monitoring. Hence change the task_ctx_nr to use perf_sw_context. Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Update subject & incorporate notes into change log, reflow comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08KVM: PPC: Book3S HV: Check return value of kvmppc_radix_initFabiano Rosas1-1/+4
[ Upstream commit 69ab6ac380a00244575de02c406dcb9491bf3368 ] The return of the function is being shadowed by the call to kvmppc_uvmem_init. Fixes: ca9f4942670c ("KVM: PPC: Book3S HV: Support for running secure guests") Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220125155735.1018683-2-farosas@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switchMaxim Kiselev2-4/+34
[ Upstream commit 5ebb74749202a25da4b3cc2eb15470225a05527c ] On board rev A, the network interface labels for the switch ports written on the front panel are different than on rev B and later. This patch fixes network interface names for the switch ports according to labels that are written on the front panel of the board rev B. They start from ETH3 and end at ETH10. This patch also introduces a separate device tree for rev A. The main device tree is supposed to cover rev B and later. Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08KVM: PPC: Fix vmx/vsx mixup in mmio emulationFabiano Rosas1-2/+2
[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ] The MMIO emulation code for vector instructions is duplicated between VSX and VMX. When emulating VMX we should check the VMX copy size instead of the VSX one. Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...") Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220125215655.1026224-3-farosas@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08powerpc/kvm: Fix kvm_use_magic_pageAndreas Gruenbacher1-1/+1
commit 0c8eb2884a42d992c7726539328b7d3568f22143 upstream. When switching from __get_user to fault_in_pages_readable, commit 9f9eae5ce717 broke kvm_use_magic_page: like __get_user, fault_in_pages_readable returns 0 on success. Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23powerpc/lib/sstep: fix 'ptesync' build errorAnders Roxell1-0/+2
commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16powerpc/fixmap: Fix VM debug warning on unmapChristophe Leroy6-2/+18
[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ] Unmapping a fixmap entry is done by calling __set_fixmap() with FIXMAP_PAGE_CLEAR as flags. Today, powerpc __set_fixmap() calls map_kernel_page(). map_kernel_page() is not happy when called a second time for the same page. WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8 CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682 NIP: c0017cd4 LR: c00187f0 CTR: 00000010 REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000 GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000 NIP [c0017cd4] set_pte_at+0xc/0x1e8 LR [c00187f0] map_kernel_page+0x9c/0x100 Call Trace: [e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable) [e1011e30] [c0165fec] __set_fixmap+0x30/0x44 [e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170 [e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0 [e1011e90] [c0c03634] do_one_initcall+0x80/0x178 [e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250 [e1011f20] [c0007e34] kernel_init+0x24/0x140 [e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010 4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030 Implement unmap_kernel_page() which clears an existing pte. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if ↵Athira Rajeev1-3/+14
PMI is pending [ Upstream commit fb6433b48a178d4672cb26632454ee0b21056eaa ] Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122033429.25395-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06Naveen N. Rao2-9/+14
[ Upstream commit 3f5f766d5f7f95a69a630da3544a1a0cee1cdddf ] Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01powerpc/32: Fix boot failure with GCC latent entropy pluginChristophe Leroy2-0/+4
commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Fix kasan_init_region() for KASANChristophe Leroy3-33/+38
commit d37823c3528e5e0705fc7746bcbc2afffb619259 upstream. It has been reported some configuration where the kernel doesn't boot with KASAN enabled. This is due to wrong BAT allocation for the KASAN area: ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m 3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m 4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m A BAT must have both virtual and physical addresses alignment matching the size of the BAT. This is not the case for BAT 4 above. Fix kasan_init_region() by using block_size() function that is in book3s32/mmu.c. To be able to reuse it here, make it non static and change its name to bat_block_size() in order to avoid name conflict with block_size() defined in <linux/blkdev.h> Also reuse find_free_bat() to avoid an error message from setbat() when no BAT is available. And allocate memory outside of linear memory mapping to avoid wasting that precious space. With this change we get correct alignment for BATs and KASAN shadow memory is allocated outside the linear memory space. ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw 1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw 2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw 3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw 4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()") Cc: stable@vger.kernel.org Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATsChristophe Leroy1-3/+2
commit 37eb7ca91b692e8e49e7dd50158349a6c8fb5b09 upstream. Today we have the following IBATs allocated: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc079ffff 0x00780000 128K Kernel x m 5: 0xc07a0000-0xc07bffff 0x007a0000 128K Kernel x m 6: - 7: - The two 128K should be a single 256K instead. When _etext is not aligned to 128Kbytes, the system will allocate all necessary BATs to the lower 128Kbytes boundary, then allocate an additional 128Kbytes BAT for the remaining block. Instead, align the top to 128Kbytes so that the function directly allocates a 256Kbytes last block: ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 4M Kernel x m 1: 0xc0400000-0xc05fffff 0x00400000 2M Kernel x m 2: 0xc0600000-0xc06fffff 0x00600000 1M Kernel x m 3: 0xc0700000-0xc077ffff 0x00700000 512K Kernel x m 4: 0xc0780000-0xc07bffff 0x00780000 256K Kernel x m 5: - 6: - 7: - Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO busesTobias Waldekranz1-0/+2
commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream. This block is used in (at least) T1024 and T1040, including their variants like T1023 etc. Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27powerpc/cell: Fix clang -Wimplicit-fallthrough warningAnders Roxell1-0/+1
commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream. Clang warns: arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels case SRR1_WAKEEE: ^ arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through case SRR1_WAKEEE: ^ break; 1 error generated. Clang is more pedantic than GCC, which does not warn when failing through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst. Add athe missing break to silence the warning. Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27powerpc/64s/radix: Fix huge vmap false positiveNicholas Piggin2-5/+13
commit 467ba14e1660b52a2f9338b484704c461bd23019 upstream. pmd_huge() is defined to false when HUGETLB_PAGE is not configured, but the vmap code still installs huge PMDs. This leads to false bad PMD errors when vunmapping because it is not seen as a huge PTE, and the bad PMD check catches it. The end result may not be much more serious than some bad pmd warning messages, because the pmd_none_or_clear_bad() does what we wanted and clears the huge PTE anyway. Fix this by checking pmd_is_leaf(), which checks for a PTE regardless of config options. The whole huge/large/leaf stuff is a tangled mess but that's kernel-wide and not something we can improve much in arch/powerpc code. pmd_page(), pud_page(), etc., called by vmalloc_to_page() on huge vmaps can similarly trigger a false VM_BUG_ON when CONFIG_HUGETLB_PAGE=n, so those checks are adjusted. The checks were added by commit d6eacedd1f0e ("powerpc/book3s: Use config independent helpers for page table walk"), while implementing a similar fix for other page table walking functions. Fixes: d909f9109c30 ("powerpc/64s/radix: Enable HAVE_ARCH_HUGE_VMAP") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216103342.609192-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27powerpc/fadump: Fix inaccurate CPU state info in vmcore generated with panicHari Bathini2-0/+18
[ Upstream commit 06e629c25daa519be620a8c17359ae8fc7a2e903 ] In panic path, fadump is triggered via a panic notifier function. Before calling panic notifier functions, smp_send_stop() gets called, which stops all CPUs except the panic'ing CPU. Commit 8389b37dffdc ("powerpc: stop_this_cpu: remove the cpu from the online map.") and again commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()") started marking CPUs as offline while stopping them. So, if a kernel has either of the above commits, vmcore captured with fadump via panic path would not process register data for all CPUs except the panic'ing CPU. Sample output of crash-utility with such vmcore: # crash vmlinux vmcore ... KERNEL: vmlinux DUMPFILE: vmcore [PARTIAL DUMP] CPUS: 1 DATE: Wed Nov 10 09:56:34 EST 2021 UPTIME: 00:00:42 LOAD AVERAGE: 2.27, 0.69, 0.24 TASKS: 183 NODENAME: XXXXXXXXX RELEASE: 5.15.0+ VERSION: #974 SMP Wed Nov 10 04:18:19 CST 2021 MACHINE: ppc64le (2500 Mhz) MEMORY: 8 GB PANIC: "Kernel panic - not syncing: sysrq triggered crash" PID: 3394 COMMAND: "bash" TASK: c0000000150a5f80 [THREAD_INFO: c0000000150a5f80] CPU: 1 STATE: TASK_RUNNING (PANIC) crash> p -x __cpu_online_mask __cpu_online_mask = $1 = { bits = {0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0} } crash> crash> crash> p -x __cpu_active_mask __cpu_active_mask = $2 = { bits = {0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0} } crash> While this has been the case since fadump was introduced, the issue was not identified for two probable reasons: - In general, the bulk of the vmcores analyzed were from crash due to exception. - The above did change since commit 8341f2f222d7 ("sysrq: Use panic() to force a crash") started using panic() instead of deferencing NULL pointer to force a kernel crash. But then commit de6e5d38417e ("powerpc: smp_send_stop do not offline stopped CPUs") stopped marking CPUs as offline till kernel commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()") reverted that change. To ensure post processing register data of all other CPUs happens as intended, let panic() function take the crash friendly path (read crash_smp_send_stop()) with the help of crash_kexec_post_notifiers option. Also, as register data for all CPUs is captured by f/w, skip IPI callbacks here for fadump, to avoid any complications in finding the right backtraces. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211207103719.91117-2-hbathini@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27powerpc: handle kdump appropriately with crash_kexec_post_notifiers optionHari Bathini1-0/+30
[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ] Kdump can be triggered after panic_notifers since commit f06e5153f4ae2 ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced crash_kexec_post_notifiers option. But using this option would mean smp_send_stop(), that marks all other CPUs as offline, gets called before kdump is triggered. As a result, kdump routines fail to save other CPUs' registers. To fix this, kdump friendly crash_smp_send_stop() function was introduced with kernel commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump friendly version in panic path"). Override this kdump friendly weak function to handle crash_kexec_post_notifiers option appropriately on powerpc. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> [Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27powerpc/40x: Map 32Mbytes of memory at startupChristophe Leroy1-1/+8
[ Upstream commit 06e7cbc29e97b4713b4ea6def04ae8501a7d1a59 ] As reported by Carlo, 16Mbytes is not enough with modern kernels that tend to be a bit big, so map another 16M page at boot. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/89b5f974a7fa5011206682cd092e2c905530ff46.1632755552.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27KVM: PPC: Book3S: Suppress failed alloc warning in H_COPY_TOFROM_GUESTAlexey Kardashevskiy1-1/+1
[ Upstream commit 792020907b11c6f9246c21977cab3bad985ae4b6 ] H_COPY_TOFROM_GUEST is an hcall for an upper level VM to access its nested VMs memory. The userspace can trigger WARN_ON_ONCE(!(gfp & __GFP_NOWARN)) in __alloc_pages() by constructing a tiny VM which only does H_COPY_TOFROM_GUEST with a too big GPR9 (number of bytes to copy). This silences the warning by adding __GFP_NOWARN. Spotted by syzkaller. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210901084550.1658699-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27KVM: PPC: Book3S: Suppress warnings when allocating too big memory slotsAlexey Kardashevskiy1-2/+6
[ Upstream commit 511d25d6b789fffcb20a3eb71899cf974a31bd9d ] The userspace can trigger "vmalloc size %lu allocation failure: exceeds total pages" via the KVM_SET_USER_MEMORY_REGION ioctl. This silences the warning by checking the limit before calling vzalloc() and returns ENOMEM if failed. This does not call underlying valloc helpers as __vmalloc_node() is only exported when CONFIG_TEST_VMALLOC_MODULE and __vmalloc_node_range() is not exported at all. Spotted by syzkaller. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [mpe: Use 'size' for the variable rather than 'cb'] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210901084512.1658628-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27powerpc/powermac: Add missing lockdep_register_key()Christophe Leroy1-0/+1
[ Upstream commit df1f679d19edb9eeb67cc2f96b29375f21991945 ] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 BUG: key c2d00cbc has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x4c0/0xb4c Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.5-gentoo-PowerMacG4 #9 NIP: c01a9428 LR: c01a9428 CTR: 00000000 REGS: e1033cf0 TRAP: 0700 Not tainted (5.15.5-gentoo-PowerMacG4) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24002002 XER: 00000000 GPR00: c01a9428 e1033db0 c2d1cf20 00000016 00000004 00000001 c01c0630 e1033a73 GPR08: 00000000 00000000 00000000 e1033db0 24002004 00000000 f8729377 00000003 GPR16: c1829a9c 00000000 18305357 c1416fc0 c1416f80 c006ac60 c2d00ca8 c1416f00 GPR24: 00000000 c21586f0 c2160000 00000000 c2d00cbc c2170000 c216e1a0 c2160000 NIP [c01a9428] lockdep_init_map_type+0x4c0/0xb4c LR [c01a9428] lockdep_init_map_type+0x4c0/0xb4c Call Trace: [e1033db0] [c01a9428] lockdep_init_map_type+0x4c0/0xb4c (unreliable) [e1033df0] [c1c177b8] kw_i2c_add+0x334/0x424 [e1033e20] [c1c18294] pmac_i2c_init+0x9ec/0xa9c [e1033e80] [c1c1a790] smp_core99_probe+0xbc/0x35c [e1033eb0] [c1c03cb0] kernel_init_freeable+0x190/0x5a4 [e1033f10] [c000946c] kernel_init+0x28/0x154 [e1033f30] [c0035148] ret_from_kernel_thread+0x14/0x1c Add missing lockdep_register_key() Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/69e4f55565bb45ebb0843977801b245af0c666fe.1638264741.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILINGMichael Ellerman1-0/+2
[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ] setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled. Fixes the following W=1 warning when CONFIG_PROFILING=n: linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27powerpc/watc