| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 7a2369b74abf76cd3e54c45b30f6addb497f831b ]
The z3fold compressed pages allocator is rarely used, most users use
zsmalloc. The only disadvantage of zsmalloc in comparison is the
dependency on MMU, and zbud is a more common option for !MMU as it was the
default zswap allocator for a long time.
Historically, zsmalloc had worse latency than zbud and z3fold but offered
better memory savings. This is no longer the case as shown by a simple
recent analysis [1]. That analysis showed that z3fold does not have any
advantage over zsmalloc or zbud considering both performance and memory
usage. In a kernel build test on tmpfs in a limited cgroup, z3fold took
3% more time and used 1.8% more memory. The latency of zswap_load() was
7% higher, and that of zswap_store() was 10% higher. Zsmalloc is better
in all metrics.
Moreover, z3fold apparently has latent bugs, which was made noticeable by
a recent soft lockup bug report with z3fold [2]. Switching to zsmalloc
not only fixed the problem, but also reduced the swap usage from 6~8G to
1~2G. Other users have also reported being bitten by mistakenly enabling
z3fold.
Other than hurting users, z3fold is repeatedly causing wasted engineering
effort. Apart from investigating the above bug, it came up in multiple
development discussions (e.g. [3]) as something we need to handle, when
there aren't any legit users (at least not intentionally).
The natural course of action is to deprecate z3fold, and remove in a few
cycles if no objections are raised from active users. Next on the list
should be zbud, as it offers marginal latency gains at the cost of huge
memory waste when compared to zsmalloc. That one will need to wait until
zsmalloc does not depend on MMU.
Rename the user-visible config option from CONFIG_Z3FOLD to
CONFIG_Z3FOLD_DEPRECATED so that users with CONFIG_Z3FOLD=y get a new
prompt with explanation during make oldconfig. Also, remove
CONFIG_Z3FOLD=y from defconfigs.
[1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/
[2]https://lore.kernel.org/lkml/EF0ABD3E-A239-4111-A8AB-5C442E759CF3@gmail.com/
[3]https://lore.kernel.org/lkml/CAJD7tkbnmeVugfunffSovJf9FAgy9rhBVt_tx=nxUveLUfqVsA@mail.gmail.com/
[arnd@arndb.de: deprecate ZSWAP_ZPOOL_DEFAULT_Z3FOLD as well]
Link: https://lkml.kernel.org/r/20240909202625.1054880-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240904233343.933462-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 7a2369b74abf76cd3e54c45b30f6addb497f831b)
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73049389e58c01e2e3bbfae900c8daeee177191 ]
When running in a non-root time namespace, the global VDSO data page
is replaced by a dedicated namespace data page and the global data
page is mapped next to it. Detailed explanations can be found at
commit 660fd04f9317 ("lib/vdso: Prepare for time namespace support").
When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq
and __kernel_sync_dicache don't work anymore because they read 0
instead of the data they need.
To address that, clock_mode has to be read. When it is set to
VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page
and the global data is located on the following page.
Add a macro called get_realdatapage which reads clock_mode and add
PAGE_SIZE to the pointer provided by get_datapage macro when
clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro
instead of get_datapage macro except for time functions as they handle
it internally.
Fixes: 74205b3fc2ef ("powerpc/vdso: Add support for time namespaces")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b76e0d4215b6b622127ebcceaa7f603313ceaec4 ]
_be32 type is defined for some elements in pseries_hp_errorlog
struct but also used them u32 after be32_to_cpu() conversion.
Example: In handle_dlpar_errorlog()
hp_elog->_drc_u.drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
And later assigned to u32 type
dlpar_cpu() - u32 drc_index = hp_elog->_drc_u.drc_index;
This incorrect usage is giving the following warnings and the
patch resolve these warnings with the correct assignment.
arch/powerpc/platforms/pseries/dlpar.c:398:53: sparse: sparse:
incorrect type in argument 1 (different base types) @@
expected unsigned int [usertype] drc_index @@
got restricted __be32 [usertype] drc_index @@
...
arch/powerpc/platforms/pseries/dlpar.c:418:43: sparse: sparse:
incorrect type in assignment (different base types) @@
expected restricted __be32 [usertype] drc_count @@
got unsigned int [usertype] @@
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408182142.wuIKqYae-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202408182302.o7QRO45S-lkp@intel.com/
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
v3:
- Fix warnings from using incorrect data types in pseries_hp_errorlog
struct
v2:
- Remove pr_info() and TODO comments
- Update more information in the commit logs
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822025028.938332-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 39190ac7cff1fd15135fa8e658030d9646fdb5f2 upstream.
The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.
That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:
/tmp/ccuSzwiR.s: Assembler messages:
/tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1
Dumping the generated assembler shows:
ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t
Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.
See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.
Fixes: 9f0cbea0d8cc ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 44ac4625ea002deecd0c227336c95b724206c698 ]
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65948b0e716a47382731889ee6bbb18642b8b003 ]
During merge of commit 4e991e3c16a3 ("powerpc: add CFUNC assembly
label annotation") a fallback version of CFUNC macro was added at
the last minute, so it can be used inconditionally.
Fixes: 4e991e3c16a3 ("powerpc: add CFUNC assembly label annotation")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0fa863f2f69b2ca4094ae066fcf1430fb31110c9.1724313540.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65a82e117ffeeab0baf6f871a1cab11a28ace183 ]
Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.
Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.
Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.
Fixes: 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9f2bff64c2f0dbee57be3d8c2741357ad3d05e6 ]
Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT,
but the pages that contain kernel TEXT may also contain kernel RODATA,
and depending on selected debug options PAGE_KERNEL_TEXT may be either
RWX or ROX. RODATA must be writable during init because it also
contains ro_after_init data.
So use PAGE_KERNEL_X instead to be sure it is RWX.
Fixes: cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/dac7a828d8497c4548c91840575a706657baa4f1.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") switched PGD entries to 64 bits, but pgd_val() returns
an unsigned long which is 32 bits on PPC32. This is not a problem
for regular PMD entries because the upper part is always NULL, but
when PMD entries are leaf they contain 64 bits values, so pgd_val()
must return an unsigned long long instead of an unsigned long.
Also change the condition to CONFIG_PPC_85xx instead of CONFIG_PPC_E500
as the change was meant for 32 bits only. Allthough this should be
harmless on PPC64, it generates a warning with pgd_ERROR print.
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/45f8fdf298ec3df7573b66d21b03a5cda92e2cb1.1724313510.git.christophe.leroy@csgroup.eu
|
|
After building the VDSO, there is a verification that it contains
no dynamic relocation, see commit aff69273af61 ("vdso: Improve
cmd_vdso_check to check all dynamic relocations").
This verification uses readelf -r and doesn't work if rela sections
are discarded.
Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu
|
|
mmu_pte_psize is only used in the tlb_64e.c, define it static.
Fixes: 25d21ad6e799 ("powerpc: Add TLB management code for 64-bit Book3E")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408011256.1O99IB0s-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/beb30d280eaa5d857c38a0834b147dffd6b28aa9.1724157750.git.christophe.leroy@csgroup.eu
|
|
topology_is_core_online() checks if the core a CPU belongs to
is online. The core is online if at least one of the sibling
CPUs is online. The first CPU of an online core is also online
in the common case, so this should be fairly quick.
Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-3-nysal@linux.ibm.com
|
|
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:
Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
NIP: c1020240 LR: c10201d0 CTR: 00000000
REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000
GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
Call Trace:
[c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
[c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
[c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
[c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
[c13fdf30] [c0078904] parse_args+0x200/0x4c4
[c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
[c13fdff0] [c0000434] set_ivor+0x12c/0x168
Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
---[ end trace 0000000000000000 ]---
This is due to virt_addr_valid() using high_memory before it is set.
high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") increased the size of PGD entries but failed to increase
the PGD directory.
Use the size of pgd_t instead of the size of pointers to calculate
the allocated size.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1cdaacb391cbd3e0240f0e0faf691202874e9422.1723109462.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
Pull struct file leak fixes from Al Viro:
"a couple of leaks on failure exits missing fdput()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
lirc: rc_dev_get_from_fd(): fix file leak
powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
