| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.
Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.
Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.
Fixes: 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu
|
|
Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT,
but the pages that contain kernel TEXT may also contain kernel RODATA,
and depending on selected debug options PAGE_KERNEL_TEXT may be either
RWX or ROX. RODATA must be writable during init because it also
contains ro_after_init data.
So use PAGE_KERNEL_X instead to be sure it is RWX.
Fixes: cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/dac7a828d8497c4548c91840575a706657baa4f1.1724173828.git.christophe.leroy@csgroup.eu
|
|
The pnv_pci_init_ioda_hub() have been removed since
commit 5ac129cdb50b ("powerpc/powernv/pci: Remove ioda1 support"),
and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822130043.783756-1-cuigaosheng1@huawei.com
|
|
The use_cop() and drop_cop() have been removed since
commit 6ff4d3e96652 ("powerpc: Remove old unused icswx based
coprocessor support"), now they are useless, so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822130609.786431-5-cuigaosheng1@huawei.com
|
|
The pas_pci_irq_fixup() have been removed since
commit 771f7404a9de ("pasemi_mac: Move the IRQ mapping from the
PCI layer to the driver"), and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822130609.786431-4-cuigaosheng1@huawei.com
|
|
The maple_calibrate_decr() have been removed since
commit 10f7e7c15e6c ("[PATCH] ppc64: consolidate calibrate_decr
implementations"), and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822130609.786431-3-cuigaosheng1@huawei.com
|
|
The implementation of _get_SP() was removed in commit f4db196717c6
("[POWERPC] Remove _get_SP"), remove the now obsolete declaration.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Update change log to refer to correct commit per Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822130609.786431-2-cuigaosheng1@huawei.com
|
|
for_each_child_of_node can help to iterate through the device_node,
and we don't need to use while loop. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822085430.25753-3-zhangzekun11@huawei.com
|
|
for_each_child_of_node() can help to iterate through the device_node,
and we don't need to do it manually. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822085430.25753-2-zhangzekun11@huawei.com
|
|
The stub versions of __real_pte() etc are only used with HPT & 4K pages,
so move them into the hash-4k.h header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240821080729.872034-1-mpe@ellerman.id.au
|
|
It can speed up initialisation of page structs at boot on large
machines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240820065705.660812-1-mpe@ellerman.id.au
|
|
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
|
|
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
If a function name is greater than 63 characters long, xmon command
may not find them. For example, here is a test that executed an illegal
instruction in a kernel function and one of call stack function has a
name greater than 63 characters long:
cpu 0x0: Vector: 700 (Program Check) at [c00000000a6577e0]
pc: c0000000001aacb8: check__allowed__function__name__for__symbol__r4+0x8/0x10
lr: c00000000019c1e0: check__allowed__function__name__for__symbol__r1+0x20/0x40
sp: c00000000a657a80
msr: 800000000288b033
current = 0xc00000000a439900
paca = 0xc000000003e90000 irqmask: 0x03 irq_happened: 0x01
.....
[link register ] c00000000019c1e0 check__allowed__function__name__for__symbol__r1+0x20/0x40
[c00000000a657a80] c00000000a439900 (unreliable)
[c00000000a657aa0] c0000000001021d8 check__allowed__function__name__for__symbol__r2_resolution_symbol+0x38/0x4c
[c00000000a657ac0] c00000000019b424 power_pmu_event_init+0xa4/0xa50
and when executing a dump instruction (di) command for long function
name, xmon fails to find the function symbol:
0:mon> di $check__allowed__function__name__for__symbol__r2_resolution_symbol
unknown symbol 'check__allowed__function__name__for__symbol__r2_resolution_symb'
0000000000000000 ********
This is because in scanhex(), tmpstr loop index is checked only for
a upper bound of 63.
Fix it by replacing the upper bound value with (KSYM_NAME_LEN-1).
With fix:
0:mon> di $check__allowed__function__name__for__symbol__r2_resolution_symbol
c0000000001021a0 3c4c0249 addis r2,r12,585
c0000000001021a4 3842ae60 addi r2,r2,-20896
c0000000001021a8 7c0802a6 mflr r0
c0000000001021ac 60000000 nop
.....
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/CANiq72=QeTgtZL4k9=4CJP6C_Hv=rh3fsn3B9S3KFoPXkyWk3w@mail.gmail.com/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826064217.46658-1-maddy@linux.ibm.com
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") switched PGD entries to 64 bits, but pgd_val() returns
an unsigned long which is 32 bits on PPC32. This is not a problem
for regular PMD entries because the upper part is always NULL, but
when PMD entries are leaf they contain 64 bits values, so pgd_val()
must return an unsigned long long instead of an unsigned long.
Also change the condition to CONFIG_PPC_85xx instead of CONFIG_PPC_E500
as the change was meant for 32 bits only. Allthough this should be
harmless on PPC64, it generates a warning with pgd_ERROR print.
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/45f8fdf298ec3df7573b66d21b03a5cda92e2cb1.1724313510.git.christophe.leroy@csgroup.eu
|
|
After building the VDSO, there is a verification that it contains
no dynamic relocation, see commit aff69273af61 ("vdso: Improve
cmd_vdso_check to check all dynamic relocations").
This verification uses readelf -r and doesn't work if rela sections
are discarded.
Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu
|
|
mmu_pte_psize is only used in the tlb_64e.c, define it static.
Fixes: 25d21ad6e799 ("powerpc: Add TLB management code for 64-bit Book3E")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408011256.1O99IB0s-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/beb30d280eaa5d857c38a0834b147dffd6b28aa9.1724157750.git.christophe.leroy@csgroup.eu
|
|
The hardware DMA limit might not be power of 2. When RAM range starts
above 0, say 4GB, DMA limit of 30 bits should end at 5GB. A single high
bit can not encode this limit.
Use a plain address for the DMA zone limit instead.
Since the DMA zone can now potentially span beyond 4GB physical limit of
DMA32, make sure to use DMA zone for GFP_DMA32 allocations in that case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Extend the code patching selftests with some basic coverage of the new
data patching variants too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-6-bgray@linux.ibm.com
|
|
These changes are for patch_instruction() uses on data. Unlike ppc64
these should not be incorrect as-is, but using the patch_uint() alias
better reflects what kind of data being patched and allows for
benchmarking the effect of different patch_* implementations (e.g.,
skipping instruction flushing when patching data).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-5-bgray@linux.ibm.com
|
|
This use of patch_instruction() is working on 32 bit data, and can fail
if the data looks like a prefixed instruction and the extra write
crosses a page boundary. Use patch_u32() to fix the write size.
Fixes: 8734b41b3efe ("powerpc/module_64: Fix livepatching for RO modules")
Link: https://lore.kernel.org/all/20230203004649.1f59dbd4@yea/
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-4-bgray@linux.ibm.com
|
|
The new data patching still needs to be aligned within a
cacheline too for the flushes to work correctly. To simplify
this requirement, we just say data patches must be aligned.
Detect when data patching is not aligned, returning an invalid
argument error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-3-bgray@linux.ibm.com
|
|
patch_instruction() is designed for patching instructions in otherwise
readonly memory. Other consumers also sometimes need to patch readonly
memory, so have abused patch_instruction() for arbitrary data patches.
This is a problem on ppc64 as patch_instruction() decides on the patch
width using the 'instruction' opcode to see if it's a prefixed
instruction. Data that triggers this can lead to larger writes, possibly
crossing a page boundary and failing the write altogether.
Introduce patch_uint(), and patch_ulong(), with aliases patch_u32(), and
patch_u64() (on ppc64) designed for aligned data patches. The patch
size is now determined by the called function, and is passed as an
additional parameter to generic internals.
While the instruction flushing is not required for data patches, it
remains unconditional in this patch. A followup series is possible if
benchmarking shows fewer flushes gives an improvement in some
data-patching workload.
ppc32 does not support prefixed instructions, so is unaffected by the
original issue. Care is taken in not exposing the size parameter in the
public (non-static) interface, so the compiler can const-propagate it
away.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-2-bgray@linux.ibm.com
|
|
LHZX_BE has been unused since commit dbf44daf7c88 ("bpf, ppc64: remove
ld_abs/ld_ind")
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/fd332b01c47bb9cb6c3af1696a2e109be655f5b5.1724222856.git.christophe.leroy@csgroup.eu
|
|
During build testing, we found a error:
arch/powerpc/kvm/book3s_hv.c:4052:17: error: variable 'loops' set but not used
unsigned long loops = 0;
1 error generated.
Fix it by removing the unused variable.
Fixes: b4deba5c41e9 ("KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8")
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240816093313.327268-1-alexs@kernel.org
|
|
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
topology_is_core_online() checks if the core a CPU belongs to
is online. The core is online if at least one of the sibling
CPUs is online. The first CPU of an online core is also online
in the common case, so this should be fairly quick.
Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-3-nysal@linux.ibm.com
|
|
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:
Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
NIP: c1020240 LR: c10201d0 CTR: 00000000
REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000
GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
Call Trace:
[c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
[c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
[c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
[c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
[c13fdf30] [c0078904] parse_args+0x200/0x4c4
[c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
[c13fdff0] [c0000434] set_ivor+0x12c/0x168
Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
---[ end trace 0000000000000000 ]---
This is due to virt_addr_valid() using high_memory before it is set.
high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") increased the size of PGD entries but failed to increase
the PGD directory.
Use the size of pgd_t instead of the size of pointers to calculate
the allocated size.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1cdaacb391cbd3e0240f0e0faf691202874e9422.1723109462.git.christophe.leroy@csgroup.eu
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
|
|
commit 0db880fc865f ("powerpc: Avoid nmi_enter/nmi_exit in real mode
interrupt.") has a config comment typo, and the #if/#else/#endif section
is small and doesn't nest additional #ifdefs so the comment is useless
and should be removed completely.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240807025604.2817577-1-ruanjinjie@huawei.com
|
|
i2c_device_id::driver_data to 0
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240804112032.3628645-2-u.kleine-koenig@baylibre.com
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
traps.c already includes backlight.h where the BACKLIGHT
constants are defined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731130720.1148872-2-tzimmermann@suse.de
|
|
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731191312.1710417-9-robh@kernel.org
|
|
Refactor HFSCR emulation for KVM guests when they exit out with
H_FAC_UNAVAIL to use a switch case instead of checking all "cause"
values, since the "cause" values are mutually exclusive; and this is
better expressed with a switch case.
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240716115206.70210-1-gautam@linux.ibm.com
|
|
Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warning is being
observed when building ppc64le with CRYPTO_CURVE25519_PPC64=m:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/crypto/curve25519-ppc64le.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Context tracking state related symbols currently use a mix of the
CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes.
Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
|
|
Pull struct file leak fixes from Al Viro:
"a couple of leaks on failure exits missing fdput()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
lirc: rc_dev_get_from_fd(): fix file leak
powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplif |
