summaryrefslogtreecommitdiff
path: root/arch/x86/Kconfig.debug
AgeCommit message (Collapse)AuthorFilesLines
2024-05-20x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=yMasahiro Yamada1-4/+1
It took me some time to understand the purpose of the tricky code at the end of arch/x86/Kconfig.debug. Without it, the following would be shown: WARNING: unmet direct dependencies detected for FRAME_POINTER because 81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection") removed 'select ARCH_WANT_FRAME_POINTERS'. The correct and more straightforward approach should have been to move it where 'select FRAME_POINTER' is located. Several architectures properly handle the conditional selection of ARCH_WANT_FRAME_POINTERS. For example, 'config UNWINDER_FRAME_POINTER' in arch/arm/Kconfig.debug. Fixes: 81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20240204122003.53795-1-masahiroy@kernel.org
2023-03-30docs: move x86 documentation into Documentation/arch/Jonathan Corbet1-1/+1
Move the x86 documentation under Documentation/arch/ as a way of cleaning up the top-level directory and making the structure of our docs more closely match the structure of the source directories it describes. All in-kernel references to the old paths have been updated. Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/ Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-23arch: make TRACE_IRQFLAGS_NMI_SUPPORT genericMark Rutland1-3/+0
On most architectures, IRQ flag tracing is disabled in NMI context, and architectures need to define and select TRACE_IRQFLAGS_NMI_SUPPORT in order to enable this. Commit: 859d069ee1ddd878 ("lockdep: Prepare for NMI IRQ state tracking") Permitted IRQ flag tracing in NMI context, allowing lockdep to work in NMI context where an architecture had suitable entry logic. At the time, most architectures did not have such suitable entry logic, and this broke lockdep on such architectures. Thus, this was partially disabled in commit: ed00495333ccc80f ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs") ... with architectures needing to select TRACE_IRQFLAGS_NMI_SUPPORT to enable IRQ flag tracing in NMI context. Currently TRACE_IRQFLAGS_NMI_SUPPORT is defined under arch/x86/Kconfig.debug. Move it to arch/Kconfig so architectures can select it without having to provide their own definition. Since the regular TRACE_IRQFLAGS_SUPPORT is selected by arch/x86/Kconfig, the select of TRACE_IRQFLAGS_NMI_SUPPORT is moved there too. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220511131733.4074499-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-25x86/Kconfig: Fix indentation of arch/x86/Kconfig.debugJuerg Haefliger1-15/+14
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20220525133203.52463-3-juerg.haefliger@canonical.com
2022-04-22objtool: Add CONFIG_OBJTOOLJosh Poimboeuf1-1/+1
Now that stack validation is an optional feature of objtool, add CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with it. CONFIG_STACK_VALIDATION can now be considered to be frame-pointer specific. CONFIG_UNWINDER_ORC is already inherently valid for live patching, so no need to "validate" it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
2021-08-16tracing: Refactor TRACE_IRQFLAGS_SUPPORT in KconfigMasahiro Yamada1-3/+0
Make architectures select TRACE_IRQFLAGS_SUPPORT instead of having many defines. Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@kernel.org Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>   #arch/arc Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-26x86, libnvdimm/test: Remove COPY_MC_TESTDan Williams1-3/+0
The COPY_MC_TEST facility has served its purpose for validating the early termination conditions of the copy_mc_fragile() implementation. Remove it and the EXPORT_SYMBOL_GPL of copy_mc_fragile(). Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/160316688322.3374697.8648308115165836243.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()Dan Williams1-1/+1
In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-07-27locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIspeterz@infradead.org1-0/+3
Prior to commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ state tracking") IRQ state tracking was disabled in NMIs due to nmi_enter() doing lockdep_off() -- with the obvious requirement that NMI entry call nmi_enter() before trace_hardirqs_off(). [ AFAICT, PowerPC and SH violate this order on their NMI entry ] However, that commit explicitly changed lockdep_hardirqs_*() to ignore lockdep_off() and breaks every architecture that has irq-tracing in it's NMI entry that hasn't been fixed up (x86 being the only fixed one at this point). The reason for this change is that by ignoring lockdep_off() we can: - get rid of 'current->lockdep_recursion' in lockdep_assert_irqs*() which was going to to give header-recursion issues with the seqlock rework. - allow these lockdep_assert_*() macros to function in NMI context. Restore the previous state of things and allow an architecture to opt-in to the NMI IRQ tracking support, however instead of relying on lockdep_off(), rely on in_nmi(), both are part of nmi_enter() and so over-all entry ordering doesn't need to change. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200727124852.GK119549@hirez.programming.kicks-ass.net
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-24/+24
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-03x86: mm: use ARCH_HAS_DEBUG_WX instead of arch definedZong Li1-27/+0
Extract DEBUG_WX to mm/Kconfig.debug for shared use. Change to use ARCH_HAS_DEBUG_WX instead of DEBUG_WX defined by arch port. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/430736828d149df3f5b462d291e845ec690e0141.1587455584.git.zong.li@sifive.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-14x86/32: Remove CONFIG_DOUBLEFAULTBorislav Petkov1-9/+0
Make the doublefault exception handler unconditional on 32-bit. Yes, it is important to be able to catch #DF exceptions instead of silent reboots. Yes, the code size increase is worth every byte. And one less CONFIG symbol is just the cherry on top. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200404083646.8897-1-bp@alien8.de
2020-02-04x86: mm: convert dump_pagetables to use walk_page_rangeSteven Price1-18/+2
Make use of the new functionality in walk_page_range to remove the arch page walking code and use the generic code to walk the page tables. The effective permissions are passed down the chain using new fields in struct pg_state. The KASAN optimisation is implemented by setting action=CONTINUE in the callbacks to skip an entire tree of entries. Link: http://lkml.kernel.org/r/20191218162402.45610-21-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-26x86/traps: Disentangle the 32-bit and 64-bit doublefault codeAndy Lutomirski1-1/+1
The 64-bit doublefault handler is much nicer than the 32-bit one. As a first step toward unifying them, make the 64-bit handler self-contained. This should have no effect no functional effect except in the odd case of x86_64 with CONFIG_DOUBLEFAULT=n in which case it will change the logging a bit. This also gets rid of CONFIG_DOUBLEFAULT configurability on 64-bit kernels. It didn't do anything useful -- CONFIG_DOUBLEFAULT=n didn't actually disable doublefault handling on x86_64. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-07x86/stacktrace: update kconfig help text for reliable unwindersJoe Lawrence1-4/+0
commit 6415b38bae26 ("x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder") added the ORC unwinder as a "reliable" unwinder. Update the help text to reflect that change: the frame pointer unwinder is no longer the only one that can provide HAVE_RELIABLE_STACKTRACE. Link: http://lkml.kernel.org/r/20191107032958.14034-1-joe.lawrence@redhat.com To: linux-kernel@vger.kernel.org To: live-patching@vger.kernel.org Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-09-02x86, perf: Fix the dependency of the x86 insn decoder selftestMasami Hiramatsu1-1/+1
Since x86 instruction decoder is not only for kprobes, it should be tested when the insn.c is compiled. (e.g. perf is enabled but kprobes is disabled) Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cbe5c34c8c1f ("x86: Compile insn.c and inat.c only for KPROBES") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab1-1/+1
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-24x86/io_delay: Define IO_DELAY macros in C instead of KconfigMasahiro Yamada1-44/+0
CONFIG_IO_DELAY_TYPE_* are not kernel configuration at all. They just define constant values, 0, 1, 2, and 3. Define them by #define in C. CONFIG_DEFAULT_IO_DELAY_TYPE can also be defined in C by using #ifdef and #define directives. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190521072211.21014-2-yamada.masahiro@socionext.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-14compiler: allow all arches to enable CONFIG_OPTIMIZE_INLININGMasahiro Yamada1-14/+0
Commit 60a3cdd06394 ("x86: add optimized inlining") introduced CONFIG_OPTIMIZE_INLINING, but it has been available only for x86. The idea is obviously arch-agnostic. This commit moves the config entry from arch/x86/Kconfig.debug to lib/Kconfig.debug so that all architectures can benefit from it. This can make a huge difference in kernel image size especially when CONFIG_OPTIMIZE_FOR_SIZE is enabled. For example, I got 3.5% smaller arm64 kernel for v5.1-rc1. dec file 18983424 arch/arm64/boot/Image.before 18321920 arch/arm64/boot/Image.after This also slightly improves the "Kernel hacking" Kconfig menu as e61aca5158a8 ("Merge branch 'kconfig-diet' from Dave Hansen') suggested; this config option would be a good fit in the "compiler option" menu. Link: http://lkml.kernel.org/r/20190423034959.13525-12-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-04efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementationArd Biesheuvel1-10/+0
Move the x86 EFI earlyprintk implementation to a shared location under drivers/firmware and tweak it slightly so we can expose it as an earlycon implementation (which is generic) rather than earlyprintk (which is only implemented for a few architectures) This also involves switching to write-combine mappings by default (which is required on ARM since device mappings lack memory semantics, and so memcpy/memset may not be used on them), and adding support for shared memory framebuffers on cache coherent non-x86 systems (which do not tolerate mismatched attributes). Note that 32-bit ARM does not populate its struct screen_info early enough for earlycon=efifb to work, so it is disabled there. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Alexander Graf <agraf@suse.de> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190202094119.13230-10-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-17x86/kconfig: Remove redundant 'default n' lines from all x86 Kconfig'sBartlomiej Zolnierkiewicz1-1/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also, since commit: f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") ... the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Juergen Gross <jgross@suse.co> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181016134217eucas1p2102984488b89178a865162553369025b%7EeGpI5NlJo0851008510eucas1p2D@eucas1p2.samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-08-02Kconfig: consolidate the "Kernel hacking" menuChristoph Hellwig1-5/+0
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to the top-level Kconfig. For two architectures that means moving their arch-specific symbols in that menu into a new arch Kconfig.debug file, and for a few more creating a dummy file so that we can include it unconditionally. Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where it belongs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22x86, nfit_test: Add unit test for memcpy_mcsafe()Dan Williams1-0/+3
Given the fact that the ACPI "EINJ" (error injection) facility is not universally available, implement software infrastructure to validate the memcpy_mcsafe() exception handling implementation. For each potential read exception point in memcpy_mcsafe(), inject a emulated exception point at the address identified by 'mcsafe_inject' variable. With this infrastructure implement a test to validate that the 'bytes remaining' calculation is correct for a range of various source buffer alignments. This code is compiled out by default. The CONFIG_MCSAFE_DEBUG configuration symbol needs to be manually enabled by editing Kconfig.debug. I.e. this functionality can not be accidentally enabled by a user / distro, it's only for development. Cc: <x86@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-30Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused IOMMU_STRESS Kconfig x86/extable: Mark exception handler functions visible x86/timer: Don't inline __const_udelay x86/headers: Remove duplicate #includes
2018-01-25x86: Remove unused IOMMU_STRESS KconfigCorentin Labbe1-8/+0
Last use of IOMMU_STRESS was removed in commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/"). 6 years later the Kconfig entry is definitely due for removal. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1516825754-28415-1-git-send-email-clabbe@baylibre.com
2017-12-11x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with ↵Andrey Ryabinin1-0/+1
CONFIG_STACKDEPOT=y Stackdepot doesn't work well with CONFIG_UNWINDER_GUESS=y. The 'guess' unwinder generate awfully large and inaccurate stacktraces, thus stackdepot can't deduplicate stacktraces because they all look like unique. Eventually stackdepot reaches its capacity limit: WARNING: CPU: 0 PID: 545 at lib/stackdepot.c:119 depot_save_stack+0x28e/0x550 Call Trace: ? kasan_kmalloc+0x144/0x160 ? depot_save_stack+0x1f5/0x550 ? do_raw_spin_unlock+0xda/0xf0 ? preempt_count_sub+0x13/0xc0 <...90 lines...> ? do_raw_spin_unlock+0xda/0xf0 Add a STACKDEPOT=n dependency to UNWINDER_GUESS to avoid the problem. Reported-by: kernel test robot <xiaolong.ye@intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171130123554.4330-1-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflictsIngo Molnar1-0/+1
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14x86/unwind: Make CONFIG_UNWINDER_ORC=y the default in kconfig for 64-bitJosh Poimboeuf1-16/+17
The ORC unwinder has been stable in testing so far. Give it much wider testing by making it the default in kconfig for x86_64. It's not yet supported for 32-bit, so leave frame pointers as the default there. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9b1237bbe7244ed9cdf8db2dcb1253e37e1c341e.1507924831.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14x86/unwind: Rename unwinder config options to 'CONFIG_UNWINDER_*'Josh Poimboeuf1-5/+5
Rename the unwinder config options from: CONFIG_ORC_UNWINDER CONFIG_FRAME_POINTER_UNWINDER CONFIG_GUESS_UNWINDER to: CONFIG_UNWINDER_ORC CONFIG_UNWINDER_FRAME_POINTER CONFIG_UNWINDER_GUESS ... in order to give them a more logical config namespace. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10Merge branch 'x86/urgent' into x86/asm, to pick up fixesIngo Molnar1-0/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/kconfig: Consolidate unwinders into multiple choice selectionJosh Poimboeuf1-7/+40
There are three mutually exclusive unwinders. Make that more obvious by combining them into a multiple-choice selection: CONFIG_FRAME_POINTER_UNWINDER CONFIG_ORC_UNWINDER CONFIG_GUESS_UNWINDER (if CONFIG_EXPERT=y) Frame pointers are still the default (for now). The old CONFIG_FRAME_POINTER option is still used in some arch-independent places, so keep it around, but make it invisible to the user on x86 - it's now selected by CONFIG_FRAME_POINTER_UNWINDER=y. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20170725135424.zukjmgpz3plf5pmt@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/kconfig: Make it easier to switch to the new ORC unwinderJosh Poimboeuf1-4/+3
A couple of Kconfig changes which make it much easier to switch to the new CONFIG_ORC_UNWINDER: 1) Remove x86 dependencies on CONFIG_FRAME_POINTER for lockdep, latencytop, and fault injection. x86 has a 'guess' unwinder which just scans the stack for kernel text addresses. It's not 100% accurate but in many cases it's good enough. This allows those users who don't want the text overhead of the frame pointer or ORC unwinders to still use these features. More importantly, this also makes it much more straightforward to disable frame pointers. 2) Make CONFIG_ORC_UNWINDER depend on !CONFIG_FRAME_POINTER. While it would be possible to have both enabled, it doesn't really make sense to do so. So enforce a sane configuration to prevent the user from making a dumb mistake. With these changes, when you disable CONFIG_FRAME_POINTER, "make oldconfig" will ask if you want to enable CONFIG_ORC_UNWINDER. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/9985fb91ce5005fe33ea5cc2a20f14bd33c61d03.1500938583.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-26x86/unwind: Add the ORC unwinderJosh Poimboeuf1-0/+25
Add the new ORC unwinder which is enabled by CONFIG_ORC_UNWINDER=y. It plugs into the existing x86 unwinder framework. It relies on objtool to generate the needed .orc_unwind and .orc_unwind_ip sections. For more details on why ORC is used instead of DWARF, see Documentation/x86/orc-unwinder.txt - but the short version is that it's a simplified, fundamentally more robust debugninfo data structure, which also allows up to two orders of magnitude faster lookups than the DWARF unwinder - which matters to profiling workloads like perf. Thanks to Andy Lutomirski for the performance improvement ideas: splitting the ORC unwind table into two parallel arrays and creating a fast lookup table to search a subset of the unwind table. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/0a6cbfb40f8da99b7a45a1a8302dc6aef16ec812.1500938583.git.jpoimboe@redhat.com [ Extended the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-20x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUGArnd Bergmann1-0/+1
The IOSF_MBI option requires PCI support, without it we get a harmless Kconfig warning when it gets selected by PUNIT_ATOM_DEBUG: warning: (X86_INTEL_LPSS && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds another dependency to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-8-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18x86/entry/64: Refactor IRQ stacks and make them NMI-safeAndy Lutomirski1-2/+0
This will allow IRQ stacks to nest inside NMIs or similar entries that can happen during IRQ stack setup or teardown. The new macros won't work correctly if they're invoked with IRQs on. Add a check under CONFIG_DEBUG_ENTRY to detect that. Signed-off-by: Andy Lutomirski <luto@kernel.org> [ Use %r10 instead of %r11 in xen_do_hypervisor_callback to make objtool and ORC unwinder's lives a little easier. ] Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/b0b2ff5fb97d2da2e1d7e1f380190c92545c8bb5.1499786555.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21usb/early: Add driver for xhci debug capabilityLu Baolu1-2/+25
XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.