| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The recent fix to ignore invalid x2APIC entries inadvertently broke
systems with creative MADT APIC tables. The affected systems have APIC
MADT tables where all entries have invalid APIC IDs (0xFF), which means
they register exactly zero CPUs.
But the condition to ignore the entries of APIC IDs < 255 in the X2APIC
MADT table is solely based on the count of MADT APIC table entries.
As a consequence, the affected machines enumerate no secondary CPUs at
all because the APIC table has entries and therefore the X2APIC table
entries with APIC IDs < 255 are ignored.
Change the condition so that the APIC table preference for APIC IDs <
255 only becomes effective when the APIC table has valid APIC ID
entries.
IOW, an APIC table full of invalid APIC IDs is considered to be empty
which in consequence enables the X2APIC table entries with a APIC ID
< 255 and restores the expected behaviour.
Fixes: ec9aedb2aa1a ("x86/acpi: Ignore invalid x2APIC entries")
Reported-by: John Sperbeck <jsperbeck@google.com>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/169953729188.3135.6804572126118798018.tip-bot2@tip-bot2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
Currently, the kernel enumerates the possible CPUs by parsing both ACPI
MADT Local APIC entries and x2APIC entries. So CPUs with "valid" APIC IDs,
even if they have duplicated APIC IDs in Local APIC and x2APIC, are always
enumerated.
Below is what ACPI MADT Local APIC and x2APIC describes on an
Ivebridge-EP system,
[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
[02Fh 0047 1] Local Apic ID : 00
...
[164h 0356 1] Subtable Type : 00 [Processor Local APIC]
[167h 0359 1] Local Apic ID : 39
[16Ch 0364 1] Subtable Type : 00 [Processor Local APIC]
[16Fh 0367 1] Local Apic ID : FF
...
[3ECh 1004 1] Subtable Type : 09 [Processor Local x2APIC]
[3F0h 1008 4] Processor x2Apic ID : 00000000
...
[B5Ch 2908 1] Subtable Type : 09 [Processor Local x2APIC]
[B60h 2912 4] Processor x2Apic ID : 00000077
As a result, kernel shows "smpboot: Allowing 168 CPUs, 120 hotplug CPUs".
And this wastes significant amount of memory for the per-cpu data.
Plus this also breaks https://lore.kernel.org/all/87edm36qqb.ffs@tglx/,
because __max_logical_packages is over-estimated by the APIC IDs in
the x2APIC entries.
According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure:
"[Compatibility note] On some legacy OSes, Logical processors with APIC
ID values less than 255 (whether in XAPIC or X2APIC mode) must use the
Processor Local APIC structure to convey their APIC information to OSPM,
and those processors must be declared in the DSDT using the Processor()
keyword. Logical processors with APIC ID values 255 and greater must use
the Processor Local x2APIC structure and be declared using the Device()
keyword."
Therefore prevent the registration of x2APIC entries with an APIC ID less
than 255 if the local APIC table enumerates valid APIC IDs.
[ tglx: Simplify the logic ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230702162802.344176-1-rui.zhang@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
|
|
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
|
|
APIC ID checks compare with BAD_APICID all over the place, but some
initializers and some code which fiddles with global data structure use
-1[U] instead. That simply cannot work at all.
Fix it up and use BAD_APICID consistently all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.862835121@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
|
On AMD Zen acpi_dev_irq_override() by default prefers the DSDT IRQ 1
settings over the MADT settings.
This causes the keyboard to malfunction on some laptop models
(see Links), all models from the Links have an INT_SRC_OVR MADT entry
for IRQ 1.
Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Switch them over to apic_update_callback() and remove the code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Prepare for removing the callback and making this as simple comparison to
an upper limit, which is the obvious solution to do for limit checks...
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
This historical leftover is really uninteresting today. Whatever MPTABLE or
MADT delivers we only trust the hardware anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
Another variable name which is confusing at best. Convert to bool.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Dave Hansen:
"As usual, these are all over the map. The biggest cluster is work from
Arnd to eliminate -Wmissing-prototype warnings:
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()"
* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
Documentation: virt: Clean up paravirt_ops doc
x86/mm: Remove unused current_untag_mask()
x86/mm: Remove repeated word in comments
x86/lib/msr: Clean up kernel-doc notation
x86/platform: Avoid missing-prototype warnings for OLPC
x86/mm: Add early_memremap_pgprot_adjust() prototype
x86/usercopy: Include arch_wb_cache_pmem() declaration
x86/vdso: Include vdso/processor.h
x86/mce: Add copy_mc_fragile_handle_tail() prototype
x86/fbdev: Include asm/fb.h as needed
x86/hibernate: Declare global functions in suspend.h
x86/entry: Add do_SYSENTER_32() prototype
x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
x86/mm: Include asm/numa.h for set_highmem_pages_init()
x86: Avoid missing-prototype warnings for doublefault code
x86/fpu: Include asm/fpu/regset.h
x86: Add dummy prototype for mk_early_pgtbl_32()
x86/pci: Mark local functions as 'static'
x86/ftrace: Move prepare_ftrace_return prototype to header
...
|
|
This is now unused, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20230620094519.15300-1-yuehaibing%40huawei.com
|
|
In parallel startup mode the APs are kicked alive by the control CPU
quickly after each other and run through the early startup code in
parallel. The real-mode startup code is already serialized with a
bit-spinlock to protect the real-mode stack.
In parallel startup mode the smpboot_control variable obviously cannot
contain the Linux CPU number so the APs have to determine their Linux CPU
number on their own. This is required to find the CPUs per CPU offset in
order to find the idle task stack and other per CPU data.
To achieve this, export the cpuid_to_apicid[] array so that each AP can
find its own CPU number by searching therein based on its APIC ID.
Introduce a flag in the top bits of smpboot_control which indicates that
the AP should find its CPU number by reading the APIC ID from the APIC.
This is required because CPUID based APIC ID retrieval can only provide the
initial APIC ID, which might have been overruled by the firmware. Some AMD
APUs come up with APIC ID = initial APIC ID + 0x10, so the APIC ID to CPU
number lookup would fail miserably if based on CPUID. Also virtualization
can make its own APIC ID assignements. The only requirement is that the
APIC IDs are consistent with the APCI/MADT table.
For the boot CPU or in case parallel bringup is disabled the control bits
are empty and the CPU number is directly available in bit 0-23 of
smpboot_control.
[ tglx: Initial proof of concept patch with bitlock and APIC ID lookup ]
[ dwmw2: Rework and testing, commit message, CPUID 0x1 and CPU0 support ]
[ seanc: Fix stray override of initial_gs in common_cpu_up() ]
[ Oleksandr Natalenko: reported suspend/resume issue fixed in
x86_acpi_suspend_lowlevel ]
[ tglx: Make it read the APIC ID from the APIC instead of using CPUID,
split the bitlock part out ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.411554373@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the
lower bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as
that must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer
interrupt on x86. The return value is unchecked in the core code, so
it ends up to allocate interrupt number 0 which is subsequently
considered to be invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems
years ago, but that missed - or did not envision - the zero IO/APIC
case.
Consolidate the zero check and return the provided "from" argument to
the core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU
in a cluster must allocate a new cluster CPU mask. As this happens
during the early startup of a CPU, where memory allocations cannot be
done, the mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and
if the to be brought up CPU is the first in a cluster the CPU takes
over this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which
is used today, but would fail completely for parallel bringup of
CPUs.
The cluster association of a CPU can be computed from the APIC ID
which is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront
and the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux
CPU number. The CPU number allows it to retrieve the rest of the
required data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs
provide a new variable smpboot_control which contains the Linux CPU
number for now. The starting CPU can retrieve and compute all
required information for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via
the APIC ID, when smpboot_control has the corresponding control bit
set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor
because confidental computing platforms need special treatment in the
early startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to
late discoveries of fundamental issue with those patches these
commits never happened.
The merge commit is unfortunately in the middle of the APIC commits
so unraveling it would have required a rebase or revert. As the
parallel bringup seems to be well on its way for 6.5 this would be
just pointless churn. As the commit does not contain any functional
change it's not a risk to keep it.
* tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
x86/coco: Export cc_vendor
x86/smpboot: Reference count on smpboot_setup_warm_reset_vector()
x86/smpboot: Remove initial_gs
x86/smpboot: Remove early_gdt_descr on 64-bit
x86/smpboot: Remove initial_stack on 64-bit
x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ACPI update from Borislav Petkov:
- Improve code generation in ACPI's global lock's acquisition function
* tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ACPI/boot: Improve __acpi_acquire_global_lock
|
|
The logic in acpi_is_processor_usable() requires the online capable
bit be set for hotpluggable CPUs. The online capable bit has been
introduced in ACPI 6.3.
However, for ACPI revisions < 6.3 which do not support that bit, CPUs
should be reported as usable, not the other way around.
Reverse the check.
[ bp: Rewrite commit message. ]
Fixes: e2869bd7af60 ("x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC")
Suggested-by: Miguel Luis <miguel.luis@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ovstrosky@oracle.com>
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: David R <david@unsolicited.net>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230327191026.3454-2-eric.devolder@oracle.com
|
|
ACPI 6.3 introduced the online capable bit, and also introduced MADT
version 5.
Latter was used to distinguish whether the offset storing online capable
could be used. However ACPI 6.2b has MADT version "45" which is for
an errata version of the ACPI 6.2 spec. This means that the Linux code
for detecting availability of MADT will mistakenly flag ACPI 6.2b as
supporting online capable which is inaccurate as it's an ACPI 6.3 feature.
Instead use the FADT major and minor revision fields to distinguish this.
[ bp: Massage. ]
Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable")
Reported-by: Eric DeVolder <eric.devolder@oracle.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/943d2445-84df-d939-f578-5d8240d342cc@unsolicited.net
|
|
Improve __acpi_acquire_global_lock by using a temporary variable.
This enables compiler to perform if-conversion and improves generated
code from:
...
72a: d1 ea shr %edx
72c: 83 e1 fc and $0xfffffffc,%ecx
72f: 83 e2 01 and $0x1,%edx
732: 09 ca or %ecx,%edx
734: 83 c2 02 add $0x2,%edx
737: f0 0f b1 17 lock cmpxchg %edx,(%rdi)
73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6>
73d: 83 e2 03 and $0x3,%edx
740: 31 c0 xor %eax,%eax
742: 83 fa 03 cmp $0x3,%edx
745: 0f 95 c0 setne %al
748: f7 d8 neg %eax
to:
...
72a: d1 e9 shr %ecx
72c: 83 e2 fc and $0xfffffffc,%edx
72f: 83 e1 01 and $0x1,%ecx
732: 09 ca or %ecx,%edx
734: 83 c2 02 add $0x2,%edx
737: f0 0f b1 17 lock cmpxchg %edx,(%rdi)
73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6>
73d: 8d 41 ff lea -0x1(%rcx),%eax
BTW: the compiler could generate:
lea 0x2(%rcx,%rdx,1),%edx
instead of:
or %ecx,%edx
add $0x2,%edx
but unwated conversion from add to or when bits are known to be zero
prevents this improvement. This is GCC PR108477.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20230320212012.12704-1-ubizjak%40gmail.com
|
|
Given its CPU#, each CPU can find its own per-cpu offset, and directly set
GSBASE accordingly. The global variable can be eliminated.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-9-usama.arif@bytedance.com
|
|
Build the GDT descriptor on the stack instead.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-8-usama.arif@bytedance.com
|
|
In order to facilitate parallel startup, start to eliminate some of the
global variables passing information to CPUs in the startup path.
However, start by introducing one more: smpboot_control. For now this
merely holds the CPU# of the CPU which is coming up. Each CPU can then
find its own per-cpu data, and everything else it needs can be found
from there, allowing the other global variables to be removed.
First to be removed is initial_stack. Each CPU can load %rsp from its
current_task->thread.sp instead. That is already set up with the correct
idle thread for APs. Set up the .sp field in INIT_THREAD on x86 so that
the BSP also finds a suitable stack pointer in the static per-cpu data
when coming up on first boot.
On resume from S3, the CPU needs a temporary stack because its idle task
is already active. Instead of setting initial_stack, the sleep code can
simply set its own current->thread.sp to point to the temporary stack.
Nobody else cares about ->thread.sp for a thread which is currently on
a CPU, because the true value is actually in the %rsp register. Which
is restored with the rest of the CPU context in do_suspend_lowlevel().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-7-usama.arif@bytedance.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as a result.
- Do not register processors that cannot be onlined for x2APIC
* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
scripts/head-object-list: Remove x86 from the list
x86/boot: Robustify calling startup_{32,64}() from the decompressor code
|
|
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
__acpi_{acquire,release}_global_lock(). x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after CMPXCHG
(and related MOV instruction in front of CMPXCHG).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG
fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE() to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230116162522.4072-1-ubizjak@gmail.com
|
|
Section 5.2.12.12 Processor Local x2APIC Structure in the ACPI v6.5
spec mandates that both "enabled" and "online capable" Local APIC Flags
should be used to determine if the processor is usable or not.
However, Linux doesn't use the "online capable" flag for x2APIC to
determine if the processor is usable. As a result, cpu_possible_mask has
incorrect value and results in more memory getting allocated for per_cpu
variables than it is going to be used.
Make sure Linux parses both "enabled" and "online capable" flags for
x2APIC to correctly determine if the processor is usable.
Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable")
Reported-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230105041059.39366-1-kvijayab@amd.com
|
|
On all recent Centaur platforms, ARB_DISABLE is handled by PMU
automatically while entering C3 type state. No need for OS to
issue the ARB_DISABLE, so set bm_control to zero to indicate that.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/1667792089-4904-1-git-send-email-TonyWWang-oc%40zhaoxin.com
|
|
When commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all
and when CPPC_LIB is supported") was introduced, we found collateral
damage that a number of AMD systems that supported CPPC but
didn't advertise support in _OSC stopped having a functional
amd-pstate driver. The _OSC was only enforced on Intel systems at that
time.
This was fixed for the MSR based designs by commit 8b356e536e69f
("ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported")
but some shared memory based designs also support CPPC but haven't
advertised support in the _OSC. Add support for those designs as well by
hardcoding the list of systems.
Fixes: 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Fixes: 8b356e536e69f ("ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported")
Link: https://lore.kernel.org/all/3559249.JlDtxWtqDm@natalenko.name/
Cc: 5.18+ <stable@vger.kernel.org> # 5.18+
Reported-and-tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVI |
