summaryrefslogtreecommitdiff
path: root/arch/x86/mm/numa.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-12memblock: drop __memblock_alloc_base()Mike Rapoport1-8/+4
The __memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter. Depending on the value of this parameter, the __memblock_alloc_base() can is replaced with the appropriate memblock_phys_alloc*() variant. Link: http://lkml.kernel.org/r/1548057848-15136-9-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05numa: make "nr_node_ids" unsigned intAlexey Dobriyan1-2/+2
Number of NUMA nodes can't be negative. This saves a few bytes on x86_64: add/remove: 0/0 grow/shrink: 4/21 up/down: 27/-265 (-238) Function old new delta hv_synic_alloc.cold 88 110 +22 prealloc_shrinker 260 262 +2 bootstrap 249 251 +2 sched_init_numa 1566 1567 +1 show_slab_objects 778 777 -1 s_show 1201 1200 -1 kmem_cache_init 346 345 -1 __alloc_workqueue_key 1146 1145 -1 mem_cgroup_css_alloc 1614 1612 -2 __do_sys_swapon 4702 4699 -3 __list_lru_init 655 651 -4 nic_probe 2379 2374 -5 store_user_store 118 111 -7 red_zone_store 106 99 -7 poison_store 106 99 -7 wq_numa_init 348 338 -10 __kmem_cache_empty 75 65 -10 task_numa_free 186 173 -13 merge_across_nodes_store 351 336 -15 irq_create_affinity_masks 1261 1246 -15 do_numa_crng_init 343 321 -22 task_numa_fault 4760 4737 -23 swapfile_init 179 156 -23 hv_synic_alloc 536 492 -44 apply_wqattrs_prepare 746 695 -51 Link: http://lkml.kernel.org/r/20190201223029.GA15820@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+0
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*Mike Rapoport1-1/+1
Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-13x86: Remove pr_fmt duplicate logging prefixesJoe Perches1-11/+11
Converting pr_fmt from a default simple #define to use KBUILD_MODNAME added some duplicate prefixes. Remove the duplicate prefixes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/e7b709a2b040af7faa81b0aa2c3a125aed628a82.1525964383.git.joe@perches.com
2017-04-11Merge branch 'x86/boot' into x86/mm, to avoid conflictIngo Molnar1-1/+1
There's a conflict between ongoing level-5 paging support and the E820 rewrite. Since the E820 rewrite is essentially ready, merge it into x86/mm to reduce tree conflicts. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-08Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"Thomas Gleixner1-1/+20
This reverts commit 474aeffd88b87746a75583f356183d5c6caa4213 due to testing failures. Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20170406124459.dwn5zhpr2xqg3lqm@node.shutemov.name
2017-04-03x86/mm/numa: Remove numa_nodemask_from_meminfo()Wei Yang1-20/+1
numa_nodemask_from_meminfo() generates a nodemask of nodes which have memory according to a meminfo descriptor. The two callsites of that function both set bits in copies of the numa_nodes_parsed nodemask. In both cases, the information in supplied numa_meminfo is a subset of numa_nodes_parsed. So setting those bits again is not really necessary. Here are the three call paths which show that the supplied numa_meminfo argument describes memory regions in nodes which are already in numa_nodes_parsed: x86_numa_init() numa_init() Case 1: acpi_numa_init() acpi_parse_memory_affinity() numa_add_memblk() node_set(numa_nodes_parsed) acpi_parse_slit() acpi_numa_slit_init() numa_set_distance() numa_alloc_distance() numa_nodemask_from_meminfo() Case 2: amd_numa_init() numa_add_memblk() node_set(numa_nodes_parsed) Case 3 dummy_numa_init() node_set(numa_nodes_parsed) numa_add_memblk() numa_register_memblks() numa_nodemask_from_meminfo() Thus, in all three cases, the respective bit in numa_nodes_parsed is set, which means it is not necessary to set it again in a copy of numa_nodes_parsed. So remove that function. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20170314030801.13656-2-richard.weiyang@gmail.com [ Heavily massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-03x86/mm/numa: Improve alloc_node_data() error path messageWei Yang1-2/+2
alloc_node_data() tries to allocate from the local node first and, if that attempt fails, falls back to any node. Improve the error message to issue the initial node for ease during debugging. Fix a typo in the comments, while at it. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Link: http://lkml.kernel.org/r/20170314030801.13656-1-richard.weiyang@gmail.com [ Masssage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-28x86/boot/e820: Move asm/e820.h to asm/e820/api.hIngo Molnar1-1/+1
In line with asm/e820/types.h, move the e820 API declarations to asm/e820/api.h and update all usage sites. This is just a mechanical, obviously correct move & replace patch, there will be subsequent changes to clean up the code and to make better use of the new header organization. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-15ACPI/NUMA: Do not map pxm to node when NUMA is turned offBoris Ostrovsky1-1/+1
acpi_map_pxm_to_node() unconditially maps nodes even when NUMA is turned off. So acpi_get_node() might return a node > 0, which is fatal when NUMA is disabled as the rest of the kernel assumes that only node 0 exists. Expose numa_off to the acpi code and return NUMA_NO_NODE when it's set. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: linux-ia64@vger.kernel.org Cc: catalin.marinas@arm.com Cc: rjw@rjwysocki.net Cc: will.deacon@arm.com Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1481602709-18260-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21x86/numa: Online memory-less nodes at boot timeTang Chen1-14/+13
For now, x86 does not support memory-less node. A node without memory will not be onlined, and the cpus on it will be mapped to the other online nodes with memory in init_cpu_to_node(). The reason of doing this is to ensure each cpu has mapped to a node with memory, so that it will be able to allocate local memory for that cpu. But we don't have to do it in this way. In this series of patches, we are going to construct cpu <-> node mapping for all possible cpus at boot time, which is a persistent mapping. It means that the cpu will be mapped to the node which it belongs to, and will never be changed. If a node has only cpus but no memory, the cpus on it will be mapped to a memory-less node. And the memory-less node should be onlined. Allocate pgdats for all memory-less nodes and online them at boot time. Then build zonelists for these nodes. As a result, when cpus on these memory-less nodes try to allocate memory from local node, it will automatically fall back to the proper zones in the zonelists. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-01Merge branch 'x86-headers-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 header cleanups from Ingo Molnar: "This tree is a cleanup of the x86 tree reducing spurious uses of module.h - which should improve build performance a bit" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, crypto: Restore MODULE_LICENSE() to glue_helper.c so it loads x86/apic: Remove duplicated include from probe_64.c x86/ce4100: Remove duplicated include from ce4100.c x86/headers: Include spinlock_types.h in x8664_ksyms_64.c for missing spinlock_t x86/platform: Delete extraneous MODULE_* tags fromm ts5500 x86: Audit and remove any remaining unnecessary uses of module.h x86/kvm: Audit and remove any unnecessary uses of module.h x86/xen: Audit and remove any unnecessary uses of module.h x86/platform: Audit and remove any unnecessary uses of module.h x86/lib: Audit and remove any unnecessary uses of module.h x86/kernel: Audit and remove any unnecessary uses of module.h x86/mm: Audit and remove any unnecessary uses of module.h x86: Don't use module.h just for AUTHOR / LICENSE tags
2016-07-14x86/mm: Audit and remove any unnecessary uses of module.hPaul Gortmaker1-1/+0
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace accordingly where needed. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-3-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-30ACPI / NUMA: move bad_srat() and srat_disabled() to drivers/acpi/numa.cDavid Daney1-1/+1
bad_srat() and srat_disabled() are shared by x86 and follow-on arm64 patches. Move them to drivers/acpi/numa.c in preparation for arm64 support. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Robert Richter <rrichter@cavium.com> [david.daney@cavium.com moved definitions to drivers/acpi/numa.c] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-19include/linux/nodemask.h: create next_node_in() helperAndrew Morton1-3/+1
Lots of code does node = next_node(node, XXX); if (node == MAX_NUMNODES) node = first_node(XXX); so create next_node_in() to do this and use it in various places. [mhocko@suse.com: use next_node_in() helper] Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Hui Zhu <zhuhui@xiaomi.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-08x86/mm/numa: Check for failures in numa_clear_kernel_node_hotplug()Ingo Molnar1-1/+3
numa_clear_kernel_node_hotplug() uses memblock_set_node() without checking for failures. memblock_set_node() is a complex function that might extend the memblock array - which extension might fail - so check for this possibility. It's not supposed to happen (because realistically if we have so little memory that this fails then we likely won't be able to boot anyway), but do the check nevertheless. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: y14sg1 <y14sg1@comcast.net> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-08x86/mm/numa: Clean up numa_clear_kernel_node_hotplug()Ingo Molnar1-23/+42
So we fixed an overflow bug in numa_clear_kernel_node_hotplug(): 2b54ab3c66d4 ("x86/mm/numa: Fix memory corruption on 32-bit NUMA kernels") ... and the bug was indirectly caused by poor coding style, such as using start/end local variables unnecessarily, which lost the physaddr_t type. So make the code more readable and try to fully comment all the thinking behind the logic. No change in functionality. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: y14sg1 <y14sg1@comcast.net> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-08x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernelsIngo Molnar1-1/+1
The following commit: a0acda917284 ("acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggable") Introduced numa_clear_kernel_node_hotplug(), which function is executed during early bootup, and which marks all currently reserved memblock regions as hot-memory-unswappable as well. y14sg1 <y14sg1@comcast.net> reported that when running 32-bit NUMA kernels, the grsecurity/PAX kernel patch flagged a size overflow in this function: PAX: size overflow detected in function x86_numa_init arch/x86/mm/numa.c:691 [...] ... the reason for the overflow is that memblock_clear_hotplug() takes physical addresses as arguments, while the start/end variables used by numa_clear_kernel_node_hotplug() are 'unsigned long', which is 32-bit on PAE kernels, but which has 64-bit physical addresses. So on 32-bit PAE kernels that have physical memory above the 4GB boundary, we truncate a 64-bit physical address range to 32 bits and pass it to memblock_clear_hotplug(), which at minimum prevents the original memory-hotplug bugfix from working, but might have other side effects as well. The fix is to use the proper type to handle physical addresses, phys_addr_t. Reported-by: y14sg1 <y14sg1@comcast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Brad Spengler <spender@grsecurity.net> Cc: Chen Tang <imtangchen@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: PaX Team <pageexec@freemail.hu> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-08mem-hotplug: handle node hole when initializing numa_meminfo.Tang Chen1-2/+4
When parsing SRAT, all memory ranges are added into numa_meminfo. In numa_init(), before entering numa_cleanup_meminfo(), all possible memory ranges are in numa_meminfo. And numa_cleanup_meminfo() removes all ranges over max_pfn or empty. But, this only works if the nodes are continuous. Let's have a look at the following example: We have an SRAT like this: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1ffffffffff] SRAT: Node 1 PXM 1 [mem 0x20000000000-0x3ffffffffff] SRAT: Node 4 PXM 2 [mem 0x40000000000-0x5ffffffffff] hotplug SRAT: Node 5 PXM 3 [mem 0x60000000000-0x7ffffffffff] hotplug SRAT: Node 2 PXM 4 [mem 0x80000000000-0x9ffffffffff] hotplug SRAT: Node 3 PXM 5 [mem 0xa0000000000-0xbffffffffff] hotplug SRAT: Node 6 PXM 6 [mem 0xc0000000000-0xdffffffffff] hotplug SRAT: Node 7 PXM 7 [mem 0xe0000000000-0xfffffffffff] hotplug On boot, only node 0,1,2,3 exist. And the numa_meminfo will look like this: numa_meminfo.nr_blks = 9 1. on node 0: [0, 60000000] 2. on node 0: [100000000, 20000000000] 3. on node 1: [20000000000, 40000000000] 4. on node 4: [40000000000, 60000000000] 5. on node 5: [60000000000, 80000000000] 6. on node 2: [80000000000, a0000000000] 7. on node 3: [a0000000000, a0800000000] 8. on node 6: [c0000000000, a0800000000] 9. on node 7: [e0000000000, a0800000000] And numa_cleanup_meminfo() will merge 1 and 2, and remove 8,9 because the end address is over max_pfn, which is a0800000000. But 4 and 5 are not removed because their end addresses are less then max_pfn. But in fact, node 4 and 5 don't exist. In a word, numa_cleanup_meminfo() is not able to handle holes between nodes. Since memory ranges in node 4 and 5 are in numa_meminfo, in numa_register_memblks(), node 4 and 5 will be mistakenly set to online. If you run lscpu, it will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node2 CPU(s): NUMA node3 CPU(s): NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 In this patch, we use memblock_overlaps_region() to check if ranges in numa_meminfo overlap with ranges in memory_block. Since memory_block contains all available memory at boot time, if they overlap, it means the ranges exist. If not, then remove them from numa_meminfo. After this patch, lscpu will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-07x86/mm/numa: Fix kernel stack corruption in ↵Dave Young1-2/+9
numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13x86: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo1-4/+2
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * Unnecessary buffer size calculation and condition on the lenght removed from intel_cacheinfo.c::show_shared_cpu_map_func(). * uv_nmi_nr_cpus_pr() got overly smart and implemented "..." abbreviation if the output stretched over the predefined 1024 byte buffer. Replaced with plain printk. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-44/+45
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggableXishi Qiu1-44/+45
If all the nodes are marked hotpluggable, alloc node data will fail. Because __next_mem_range_rev() will skip the hotpluggable memory regions. numa_clear_kernel_node_hotplug() is called after alloc node data. numa_init() ... ret = init_func(); // this will mark hotpluggable flag from SRAT ... memblock_set_bottom_up(false); ... ret = numa_register_memblks(&numa_meminfo); // this will alloc node data(pglist_data) ... numa_clear_kernel_node_hotplug(); // in case all the nodes are hotpluggable ... numa_register_memblks() setup_node_data() memblock_find_in_range_node() __memblock_find_range_top_down() for_each_mem_range_rev() __next_mem_range_rev() This patch moves numa_clear_kernel_node_hotplug() into numa_register_memblks(), clear kernel node hotpluggable flag before alloc node data, then alloc node data won't fail even all the nodes are hotpluggable. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Dave Jones <davej@redhat.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-16x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data()Luiz Capitulino1-20/+14
The setup_node_data() function allocates a pg_data_t object, inserts it into the node_data[] array and initializes the following fields: node_id, node_start_pfn and node_spanned_pages. However, a few function calls later during the kernel boot, free_area_init_node() re-initializes those fields, possibly with setup_node_data() is not used. This causes a small glitch when running Linux as a hyperv numa guest: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] Initmem setup node 0 [mem 0x00000000-0x7fffffff] NODE_DATA [mem 0x7ffdc000-0x7ffeffff] Initmem setup node 1 [mem 0x80800000-0x1081fffff] NODE_DATA [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 In this dmesg, the SRAT table reports that the memory range for node 1 starts at 0x80200000. However, the line starting with "Initmem" reports that node 1 memory range starts at 0x80800000. The "Initmem" line is reported by setup_node_data() and is wrong, because the kernel ends up using the range as reported in the SRAT table. This commit drops all that dead code from setup_node_data(), renames it to alloc_node_data() and adds a printk() to free_area_init_node() so that we report a node's memory range accurately. Here's the same dmesg section with this patch applied: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] NODE_DATA(0) allocated [mem 0x7ffdc000-0x7ffeffff] NODE_DATA(1) allocated [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 Initmem setup node 1 [mem 0x80200000-0x1081fffff] On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 This commit was tested on a two node bare-metal NUMA machine and Linux as a numa guest on hyperv and qemu/kvm. PS: The wrong memory range reported by setup_node_data() seems to be harmless in the current kernel because it's just not used. However, that bad range is used in kernel 2.6.32 to initialize the old boot memory allocator, which causes a crash during boot. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-04arch/x86/mm/numa.c: use for_each_memblock()Emil Medve1-3/+3
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-27x86, platforms: Remove NUMAQH. Peter Anvin1-4/+0
The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
2014-02-06arch/x86/mm/numa.c: fix array index overflow when synchronizing nid to ↵Tang Chen1-8/+11
memblock.reserved. The following path will cause array out of bound. memblock_add_region() will always set nid in memblock.reserved to MAX_NUMNODES. In numa_register_memblks(), after we set all nid to correct valus in memblock.reserved, we called setup_node_data(), and used memblock_alloc_nid() to allocate memory, with nid set to MAX_NUMNODES. The nodemask_t type can be seen as a bit array. And the index is 0 ~ MAX_NUMNODES-1. After that, when we call node_set() in numa_clear_kernel_node_hotplug(), the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~ MAX_NUMNODES-1]. See below: numa_init() |---> numa_register_memblks() | |---> memblock_set_node(memory) set correct nid in memblock.memory | |---> memblock_set_node(reserved) set correct nid in memblock.reserved | |...... | |---> setup_node_data() | |---> memblock_alloc_nid() here, nid is set to MAX_NUMNODES (1024) |...... |---> numa_clear_kernel_node_hotplug() |---> node_set() here, we have an index 1024, and overflowed This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix this problem. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Cc: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-06arch/x86/mm/numa.c: initialize numa_kernel_nodes in ↵Tang Chen1-1/+1
numa_clear_kernel_node_hotplug() On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug() was not initialized. So we need to initialize it. [akpm@linux-foundation.org: use NODE_MASK_NONE, per David] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Reported-by: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggableTang Chen1-0/+44
At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21acpi, numa, mem_hotplug: mark hotpluggable memory in memblockTang Chen1-0/+2
When parsing SRAT, we know that which memory area is hotpluggable. So we invoke function memblock_mark_hotplug() introduced by previous patch to mark hotpluggable memory in memblock. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21