| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't
directly emulate instructions for ES/SNP, and instead the guest must
explicitly request emulation. Unless the guest explicitly requests
emulation without accessing memory, ES/SNP relies on KVM creating an MMIO
SPTE, with the subsequent #NPF being reflected into the guest as a #VC.
But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs,
because except for ES/SNP, doing so requires setting reserved bits in the
SPTE, i.e. the SPTE can't be readable while also generating a #VC on
writes. Because KVM never creates MMIO SPTEs and jumps directly to
emulation, the guest never gets a #VC. And since KVM simply resumes the
guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU
into an infinite #NPF loop if the vCPU attempts to write read-only memory.
Disallow read-only memory for all VMs with protected state, i.e. for
upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible
to support read-only memory, as TDX uses EPT Violation #VE to reflect the
fault into the guest, e.g. KVM could configure read-only SPTEs with RX
protections and SUPPRESS_VE=0. But there is no strong use case for
supporting read-only memslots on TDX, e.g. the main historical usage is
to emulate option ROMs, but TDX disallows executing from shared memory.
And if someone comes along with a legitimate, strong use case, the
restriction can always be lifted for TDX.
Don't bother trying to retroactively apply the restriction to SEV-ES
VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't
possibly work for SEV-ES, i.e. disallowing such memslots is really just
means reporting an error to userspace instead of silently hanging vCPUs.
Trying to deal with the ordering between KVM_SEV_INIT and memslot creation
isn't worth the marginal benefit it would provide userspace.
Fixes: 26c44aa9e076 ("KVM: SEV: define VM types for SEV and SEV-ES")
Fixes: 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support")
Cc: Peter Gonda <pgonda@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240809190319.1710470-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ignore the userspace provided x2APIC ID when fixing up APIC state for
KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit
a92e2543d6a8 ("KVM: x86: use hardware-compatible format for APIC ID
register"), which added the fixup, didn't intend to allow userspace to
modify the x2APIC ID. In fact, that commit is when KVM first started
treating the x2APIC ID as readonly, apparently to fix some race:
static inline u32 kvm_apic_id(struct kvm_lapic *apic)
{
- return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff;
+ /* To avoid a race between apic_base and following APIC_ID update when
+ * switching to x2apic_mode, the x2apic mode returns initial x2apic id.
+ */
+ if (apic_x2apic_mode(apic))
+ return apic->vcpu->vcpu_id;
+
+ return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
}
Furthermore, KVM doesn't support delivering interrupts to vCPUs with a
modified x2APIC ID, but KVM *does* return the modified value on a guest
RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually
work with a modified x2APIC ID.
Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map
calculation, which expects the LDR to align with the x2APIC ID.
WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm]
CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014
RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm]
Call Trace:
<TASK>
kvm_apic_set_state+0x1cf/0x5b0 [kvm]
kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm]
kvm_vcpu_ioctl+0x663/0x8a0 [kvm]
__x64_sys_ioctl+0xb8/0xf0
do_syscall_64+0x56/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fade8b9dd6f
Unfortunately, the WARN can still trigger for other CPUs than the current
one by racing against KVM_SET_LAPIC, so remove it completely.
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co
Reported-by: Haoyu Wu <haoyuwu254@gmail.com>
Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com
Reported-by: syzbot+545f1326f405db4e1c3e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use this_cpu_ptr() instead of open coding the equivalent in various
user return MSR helpers.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240802201630.339306-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no caller in tree since introduction in commit b4f69df0f65e ("KVM:
x86: Make Hyper-V emulation optional")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-ID: <20240803113233.128185-1-yuehaibing@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The copy_from_user() function returns the number of bytes which it
was not able to copy. Return -EFAULT instead.
Fixes: dee5a47cc7a4 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-4-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If snp_lookup_rmpentry() fails then "assigned" is printed in the error
message but it was never initialized. Initialize it to false.
Fixes: dee5a47cc7a4 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240612115040.2423290-3-dan.carpenter@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
|
|
The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.
The kernel uses a static key to switch between the two modes.
In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).
A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.
Bisect points to commit ce0a1b608bfc ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.
Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.
This results in the following decision matrix:
X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N
virt_spin_lock_key N Y/N Y N
Fixes: ce0a1b608bfc ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com
|
|
On a platform using the "Multiprocessor Wakeup Structure"[1] to startup
secondary CPUs the control processor needs to memremap() the physical
address of the MP Wakeup Structure mailbox to the variable
acpi_mp_wake_mailbox, which holds the virtual address of mailbox.
To wake up the AP the control processor writes the APIC ID of AP, the
wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox.
Current implementation doesn't consider the case which restricts boot time
CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other
CPUs online later from user space as it sets acpi_mp_wake_mailbox to
read-only after init. So when the first AP is tried to brought online
after init, the attempt to update the variable results in a kernel panic.
The memremap() call that initializes the variable cannot be moved into
acpi_parse_mp_wake() because memremap() is not functional at that point in
the boot process. Also as the APs might never be brought up, keep the
memremap() call in acpi_wakeup_cpu() so that the operation only takes place
when needed.
Fixes: 24dd05da8c79 ("x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init")
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20240805103531.1230635-1-zhiquan1.li@intel.com
|
|
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Prevent a deadlock on cpu_hotplug_lock in the aperf/mperf driver.
A recent change in the ACPI code which consolidated code pathes moved
the invocation of init_freq_invariance_cppc() to be moved to a CPU
hotplug handler. The first invocation on AMD CPUs ends up enabling a
static branch which dead locks because the static branch enable tries
to acquire cpu_hotplug_lock but that lock is already held write by
the hotplug machinery.
Use static_branch_enable_cpuslocked() instead and take the hotplug
lock read for the Intel code path which is invoked from the
architecture code outside of the CPU hotplug operations.
- Fix the number of reserved bits in the sev_config structure bit field
so that the bitfield does not exceed 64 bit.
- Add missing Zen5 model numbers
- Fix the alignment assumptions of pti_clone_pgtable() and
clone_entry_text() on 32-bit:
The code assumes PMD aligned code sections, but on 32-bit the kernel
entry text is not PMD aligned. So depending on the code size and
location, which is configuration and compiler dependent, entry text
can cross a PMD boundary. As the start is not PMD aligned adding PMD
size to the start address is larger than the end address which
results in partially mapped entry code for user space. That causes
endless recursion on the first entry from userspace (usually #PF).
Cure this by aligning the start address in the addition so it ends up
at the next PMD start address.
clone_entry_text() enforces PMD mapping, but on 32-bit the tail might
eventually be PTE mapped, which causes a map fail because the PMD for
the tail is not a large page mapping. Use PTI_LEVEL_KERNEL_IMAGE for
the clone() invocation which resolves to PTE on 32-bit and PMD on
64-bit.
- Zero the 8-byte case for get_user() on range check failure on 32-bit
The recend consolidation of the 8-byte get_user() case broke the
zeroing in the failure case again. Establish it by clearing ECX
before the range check and not afterwards as that obvioulsy can't be
reached when the range check fails
* tag 'x86-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit
x86/mm: Fix pti_clone_entry_text() for i386
x86/mm: Fix pti_clone_pgtable() alignment assumption
x86/setup: Parse the builtin command line before merging
x86/CPU/AMD: Add models 0x60-0x6f to the Zen5 range
x86/sev: Fix __reserved field in sev_config
x86/aperfmperf: Fix deadlock on cpu_hotplug_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Move the smp_processor_id() invocation back into the non-preemtible
region, so that the result is valid to use
- Add the missing package C2 residency counters for Sierra Forest CPUs
to make the newly added support actually useful
* tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix smp_processor_id()-in-preemptible warnings
perf/x86/intel/cstate: Add pkg C2 residency counter for Sierra Forest
|
|
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
|
|
* fix latent bug in how usage of large pages is determined for
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
While zeroing the upper 32 bits of an 8-byte getuser on 32-bit x86 was
fixed by commit 8c860ed825cb ("x86/uaccess: Fix missed zeroing of ia32 u64
get_user() range checking") it was broken again in commit 8a2462df1547
("x86/uaccess: Improve the 8-byte getuser() case").
This is because the register which holds the upper 32 bits (%ecx) is being
cleared _after_ the check_range, so if the range check fails, %ecx is never
cleared.
This can be reproduced with:
./tools/testing/kunit/kunit.py run --arch i386 usercopy
Instead, clear %ecx _before_ check_range in the 8-byte case. This
reintroduces a bit of the ugliness we were trying to avoid by adding
another #ifndef CONFIG_X86_64, but at least keeps check_range from needing
a separate bad_get_user_8 jump.
Fixes: 8a2462df1547 ("x86/uaccess: Improve the 8-byte getuser() case")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20240731073031.4045579-1-davidgow@google.com
|
|
The `if (req_max_level)` test was meant ignore req_max_level if
PG_LEVEL_NONE was returned. Hence, this function should return
max_level instead of the ignored req_max_level.
This is only a latent issue for now, since guest_memfd does not
support large pages.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Message-ID: <20240801173955.1975034-1-ackerleytng@google.com>
Fixes: f32fb32820b1 ("KVM: x86: Add hook for determining max NPT mapping level")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While x86_64 has PMD aligned text sections, i386 does not have this
luxery. Notably ALIGN_ENTRY_TEXT_END is empty and _etext has PAGE
alignment.
This means that text on i386 can be page granular at the tail end,
which in turn means that the PTI text clones should consistently
account for this.
Make pti_clone_entry_text() consistent with pti_clone_kernel_text().
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions.
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net
|
|
Commit in Fixes was added as a catch-all for cases where the cmdline is
parsed before being merged with the builtin one.
And promptly one issue appeared, see Link below. The microcode loader
really needs to parse it that early, but the merging happens later.
Reshuffling the early boot nightmare^W code to handle that properly would
be a painful exercise for another day so do the chicken thing and parse the
builtin cmdline too before it has been merged.
Fixes: 0c40b1c7a897 ("x86/setup: Warn when option parsing is done too early")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730152108.GAZqkE5Dfi9AuKllRw@fat_crate.local
Link: https://lore.kernel.org/r/20240722152330.GCZp55ck8E_FT4kPnC@fat_crate.local
|
|
The following bug was triggered on a system built with
CONFIG_DEBUG_PREEMPT=y:
# echo p > /proc/sysrq-trigger
BUG: using smp_processor_id() in preemptible [00000000] code: sh/117
caller is perf_event_print_debug+0x1a/0x4c0
CPU: 3 UID: 0 PID: 117 Comm: sh Not tainted 6.11.0-rc1 #109
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
check_preemption_disabled+0xc8/0xd0
perf_event_print_debug+0x1a/0x4c0
__handle_sysrq+0x140/0x180
write_sysrq_trigger+0x61/0x70
proc_reg_write+0x4e/0x70
vfs_write+0xd0/0x430
? handle_mm_fault+0xc8/0x240
ksys_write+0x9c/0xd0
do_syscall_64+0x96/0x190
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is because the commit d4b294bf84db ("perf/x86: Hybrid PMU support
for counters") took smp_processor_id() outside the irq critical section.
If a preemption occurs in perf_event_print_debug() and the task is
migrated to another cpu, we may get incorrect pmu debug information.
Move smp_processor_id() back inside the irq critical section to fix this
issue.
Fixes: d4b294bf84db ("perf/x86: Hybrid PMU support for counters")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240729220928.325449-1-lihuafei1@huawei.com
|
|
Add some new Zen5 models for the 0x1A family.
[ bp: Merge the 0x60 and 0x70 ranges. ]
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729064626.24297-1-bp@kernel.org
|
|
sev_config currently has debug, ghcbs_initialized, and use_cas fields.
However, __reserved count has not been updated. Fix this.
Fixes: 34ff65901735 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Pavan Kumar Paluri <papaluri@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729180808.366587-1-papaluri@amd.com
|
|
The broken patch results in a call to init_freq_invariance_cppc() in a CPU
hotplug handler in both the path for initially present CPUs and those
hotplugged later. That function includes a one time call to
amd_set_max_freq_ratio() which in turn calls freq_invariance_enable() that has
a static_branch_enable() which takes the cpu_hotlug_lock which is already
held.
Avoid the deadlock by using static_branch_enable_cpuslocked() as the lock will
always be already held. The equivalent path on Intel does not already hold
this lock, so take it around the call to freq_invariance_enable(), which
results in it being held over the call to register_syscall_ops, which looks to
be safe to do.
Fixes: c1385c1f0ba3 ("ACPI: processor: Simplify initial onlining to use same path for cold and hotplug")
Closes: https://lore.kernel.org/all/CABXGCsPvqBfL5hQDOARwfqasLRJ_eNPBbCngZ257HOe=xbWDkA@mail.gmail.com/
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240729105504.2170-1-Jonathan.Cameron@huawei.com
|
|
Package C2 residency counter is also available on Sierra Forest.
So add it support in srf_cstates.
Fixes: 3877d55a0db2 ("perf/x86/intel/cstate: Add Sierra Forest support")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20240717031609.74513-1-zhenyuw@linux.intel.com
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes for issues introduced in this merge window:
- fix enhanced debugging in the Xen multicall handling
- two patches fixing a boot failure when running as dom0 in PVH mode"
* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix memblock_reserve() usage on PVH
x86/xen: move xen_reserve_extra_memory()
xen: fix multicall debug data referencing
|
|
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This check is currently performed by sev_gmem_post_populate(), but it
applies to all callers of kvm_gmem_populate(): the point of the function
is that the memory is being encrypted and some work has to be done
on all the gfns in order to encrypt them.
Therefore, check the KVM_MEMORY_ATTRIBUTE_PRIVATE attribute prior
to invoking the callback, and stop the operation if a shared page
is encountered. Because CONFIG_KVM_PRIVATE_MEM in principle does
not require attributes, this makes kvm_gmem_populate() depend on
CONFIG_KVM_GENERIC_PRIVATE_MEM (which does require them).
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While currently there is no other attribute than KVM_MEMORY_ATTRIBUTE_PRIVATE,
KVM code such as kvm_mem_is_private() is written to expect their existence.
Allow using kvm_range_has_memory_attributes() as a multi-page version of
kvm_mem_is_private(), without it breaking later when more attributes are
introduced.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not allow populating the same page twice with startup data. In the
case of SEV-SNP, for example, the firmware does not allow it anyway,
since the launch-update operation is only possible on pages that are
still shared in the RMP.
Even if it worked, kvm_gmem_populate()'s callback is meant to have side
effects such as updating launch measurements, and updating the same
page twice is unlikely to have the desired results.
Races between calls to the ioctl are not possible because
kvm_gmem_populate() holds slots_lock and the VM should not be running.
But again, even if this worked on other confidential computing technology,
it doesn't matter to guest_memfd.c whether this is something fishy
such as missing synchronization in userspace, or rather something
intentional. One of the racers wins, and the page is initialized by
either kvm_gmem_prepare_folio() or kvm_gmem_populate().
Anyway, out of paranoia, adjust sev_gmem_post_populate() anyway to use
the same errno that kvm_gmem_populate() is using.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_PRE_FAULT_MEMORY for an SNP guest can race with
sev_gmem_post_populate() in bad ways. The following sequence for
instance can potentially trigger an RMP fault:
thread A, sev_gmem_post_populate: called
thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP
thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i);
thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE);
RMP #PF
Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's
initial private memory contents have been finalized via
KVM_SEV_SNP_LAUNCH_FINISH.
Beyond fixing this issue, it just sort of makes sense to enforce this,
since the KVM_PRE_FAULT_MEMORY documentation states:
"KVM maps memory as if the vCPU generated a stage-2 read page fault"
which sort of implies we should be acting on the same guest state that a
vCPU would see post-launch after the initial guest memory is all set up.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SAP's vSMP MemoryONE continuously requests a local APIC timer period
less than 500 us, resulting in the following kernel log spam:
kvm: vcpu 15: requested 70240 ns lapic timer period limited to 500000 ns
kvm: vcpu 19: requested 52848 ns lapic timer period limited to 500000 ns
kvm: vcpu 15: requested 70256 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 70256 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 70208 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 387520 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 70160 ns lapic timer period limited to 500000 ns
kvm: vcpu 66: requested 205744 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 70224 ns lapic timer period limited to 500000 ns
kvm: vcpu 9: requested 70256 ns lapic timer period limited to 500000 ns
limit_periodic_timer_frequency: 7569 callbacks suppressed
...
To eliminate this spam, change the pr_info_ratelimited() in
limit_periodic_timer_frequency() to pr_info_once().
Reported-by: James Houghton <jthoughton@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-ID: <20240724190640.2449291-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl constification from Joel Granados:
"Treewide constification of the ctl_table argument of proc_handlers
using a coccinelle script and some manual code formatting fixups.
This is a prerequisite to moving the static ctl_table structs into
read-only data section which will ensure that proc_handler function
pointers cannot be modified"
* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: treewide: constify the ctl_table argument of proc_handlers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
The current usage of memblock_reserve() in init_pvh_bootparams() is done before
the .bss is zeroed, and that used to be fine when
memblock_reserved_init_regions implicitly ended up in the .meminit.data
section. However after commit 73db3abdca58c memblock_reserved_init_regions
ends up in the .bss section, thus breaking it's usage before the .bss is
cleared.
Move and rename the call to xen_reserve_extra_memory() so it's done in the
x86_init.oem.arch_setup hook, which gets executed after the .bss has been
zeroed, but before calling e820__memory_setup().
Fixes: 73db3abdca58c ("init/modpost: conditionally check section mismatch to __meminit*")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In preparation for making the function static.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6 |
