| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".
Fixes: 471470bc7052 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The patch can optimize the running times of insmod command by modify ELF
relocation function.
In the 5.10 and latest kernel, when install the riscv ELF drivers which
contains multiple symbol table items to be relocated, kernel takes a lot
of time to execute the relocation. For example, we install a 3+MB driver
need 180+s.
We focus on the riscv architecture handle R_RISCV_HI20 and R_RISCV_LO20
type items relocation function in the arch\riscv\kernel\module.c and
find that there are two-loops in the function. If we modify the begin
number in the second for-loops iteration, we could save significant time
for installation. We install the same 3+MB driver could just need 2s.
Signed-off-by: Amma Lee <lixiaoyun@binary-semi.com>
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231214063906.13612-1-fido_max@inbox.ru
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Zkr extension is ratified and provides 16 bits of entropy seed when
reading the SEED CSR.
We can implement arch_get_random_seed_longs() by doing multiple csrrw to
that CSR and filling an unsigned long with valid entropy bits.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Samuel Ortiz <sameo@rivosinc.com>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231130111704.1319081-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Hamming Weight of a number is the total number of bits set in it, so
the cpop/cpopw instruction from Zbb extension can be used to accelerate
hweight() API.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231112095244.4015351-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
GZIP arch/riscv/boot/Image.gz
AS arch/riscv/boot/loader.o
AS arch/riscv/boot/loader.o
Kernel: arch/riscv/boot/Image is ready
PAD arch/riscv/boot/vmlinux.bin
GZIP arch/riscv/boot/vmlinuz
Kernel: arch/riscv/boot/loader is ready
OBJCOPY arch/riscv/boot/loader.bin
Kernel: arch/riscv/boot/loader.bin is ready
Kernel: arch/riscv/boot/Image.gz is ready
OBJCOPY arch/riscv/boot/vmlinuz.o
LD arch/riscv/boot/vmlinuz.efi.elf
OBJCOPY arch/riscv/boot/vmlinuz.efi
Kernel: arch/riscv/boot/vmlinuz.efi is ready
The log "OBJCOPY arch/riscv/boot/Image" is displayed 5 times.
(also "AS arch/riscv/boot/loader.o" twice.)
It indicates that 5 threads simultaneously enter arch/riscv/boot/
and write to arch/riscv/boot/Image.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=riscv Image Image.gz loader loader.bin vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
OBJCOPY arch/riscv/boot/Image
PAD arch/riscv/boot/vmlinux.bin
truncate: Invalid number: 'arch/riscv/boot/vmlinux.bin'
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/riscv/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/riscv/boot/vmlinux.bin'
make[1]: *** [arch/riscv/Makefile:167: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
Kernel: arch/riscv/boot/Image is ready
GZIP arch/riscv/boot/Image.gz
AS arch/riscv/boot/loader.o
AS arch/riscv/boot/loader.o
Kernel: arch/riscv/boot/loader is ready
OBJCOPY arch/riscv/boot/loader.bin
Kernel: arch/riscv/boot/loader.bin is ready
Kernel: arch/riscv/boot/Image.gz is ready
make: *** [Makefile:234: __sub-make] Error 2
Image.gz, loader, vmlinuz.efi depend on Image. loader.bin depends
on loader. Such dependencies are not specified in arch/riscv/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231119100024.2370992-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Björn Töpel <bjorn@kernel.org> says:
This series includes a three ftrace improvements for RISC-V:
1. Do not require to run recordmcount at build time (patch 1)
2. Simplification of the function graph functionality (patch 2)
3. Enable DYNAMIC_FTRACE_WITH_DIRECT_CALLS (patch 3 and 4)
The series has been tested on Qemu/rv64 virt/Debian sid with the
following test configs:
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_SAMPLE_FTRACE_DIRECT=m
CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m
CONFIG_SAMPLE_FTRACE_OPS=m
All tests pass.
* b4-shazam-merge:
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
Link: https://lore.kernel.org/r/20231130121531.1178502-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add RISC-V variants of the ftrace-direct* samples.
Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231130121531.1178502-5-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Select the DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
register_ftrace_direct[_multi] interfaces allowing users to register
the customed trampoline (direct_caller) as the mcount for one or more
target functions. And modify_ftrace_direct[_multi] are also provided
for modifying direct_caller.
To make the direct_caller and the other ftrace hooks (e.g.
function/fgraph tracer, k[ret]probes) co-exist, a temporary register
is nominated to store the address of direct_caller in
ftrace_regs_caller. After the setting of the address direct_caller by
direct_ops->func and the RESTORE_REGS in ftrace_regs_caller,
direct_caller will be jumped to by the `jr` inst.
Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support for RISC-V.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231130121531.1178502-4-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Similar to commit 0c0593b45c9b ("x86/ftrace: Make function graph use
ftrace directly") and commit c4a0ebf87ceb ("arm64/ftrace: Make
function graph use ftrace directly"), RISC-V has no need for a special
graph tracer hook. The graph_ops::func function can be used to install
the return_hooker.
This cleanup only changes the FTRACE_WITH_REGS implementation, leaving
the mcount-based implementation is unaffected.
Perform the simplification, and also cleanup the register save/restore
macros.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231130121531.1178502-3-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In commit afc76b8b8011 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead
of MCOUNT") RISC-V added support for -fpatchable-function-entry, which
removes the need for recordmcount.
Select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY to tell the build
system not to run recordmcount.
Link: https://lore.kernel.org/linux-riscv/CAAYs2=j3Eak9vU6xbAw0zPuoh00rh8v5C2U3fePkokZFibWs2g@mail.gmail.com/T/#t
Link: https://lore.kernel.org/linux-riscv/Y4jtfrJt+%2FQ5nMOz@spud/
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231130121531.1178502-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Nathan Chancellor <nathan@kernel.org> says:
This series disables DWARF5 for LLVM versions where it is known to be
broken due to linker relaxation.
* b4-shazam-merge:
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-0-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
LLVM prior to 18.0.0 would generate incorrect debug info for DWARF5 due
to linker relaxation, which was worked around in clang by defaulting
RISC-V to DWARF4 [1]. Unfortunately, this workaround does not work for
the kernel because the DWARF version can be independently changed from
the default in Kconfig.
Do not allow DWARF5 to be selected for RISC-V when using linker
relaxation (ld.lld >= 15.0.0) and a version of LLVM that does not have
the fixes (the integrated assembler [2] and ld.lld [3] < 18.0.0)
necessary to generate the correct debug info.
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6 [1]
Link: https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a [2]
Link: https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77 [3]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-2-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Certain configurations may need to be disabled if linker relaxation is
in use, such as DWARF5 with ld.lld < 18. Hoist the logic of whether or
not linker relaxation is in use into Kconfig so decisions can be made at
configuration time.
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-1-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
Each architecture generally implements fine-tuned checksum functions to
leverage the instruction set. This patch adds the main checksum
functions that are used in networking. Tested on QEMU, this series
allows the CHECKSUM_KUNIT tests to complete an average of 50.9% faster.
This patch takes heavy use of the Zbb extension using alternatives
patching.
To test this patch, enable the configs for KUNIT, then CHECKSUM_KUNIT.
I have attempted to make these functions as optimal as possible, but I
have not ran anything on actual riscv hardware. My performance testing
has been limited to inspecting the assembly, running the algorithms on
x86 hardware, and running in QEMU.
ip_fast_csum is a relatively small function so even though it is
possible to read 64 bits at a time on compatible hardware, the
bottleneck becomes the clean up and setup code so loading 32 bits at a
time is actually faster.
* b4-shazam-merge:
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-0-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Provide a 32 and 64 bit version of do_csum. When compiled for 32-bit
will load from the buffer in groups of 32 bits, and when compiled for
64-bit will load in groups of 64 bits.
Additionally provide riscv optimized implementation of csum_ipv6_magic.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Xiao Wang <xiao.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-4-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Provide checksum algorithms that have been designed to leverage riscv
instructions such as rotate. In 64-bit, can take advantage of the larger
register to avoid some overflow checking.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Xiao Wang <xiao.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-3-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Support static branches depending on the value of misaligned accesses.
This will be used by a later patch in the series. At any point in time,
this static branch will only be enabled if all online CPUs are
considered "fast".
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-2-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Two small fixes for the parisc architecture:
- Fix PDC address calculation with narrow firmware (64-bit kernel on
32-bit firmware)
- Fix kthread which checks power button get started on qemu too"
* tag 'parisc-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/power: Fix power soft-off button emulation on qemu
parisc/firmware: Fix F-extend for PDC addresses
|
|
Pull Xtensa updates from Max Filippov:
- small cleanups in the xtensa PCI and asmmacro code
- fix kernel build with FDPIC toolchain
* tag 'xtensa-20240117' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: don't produce FDPIC output with fdpic toolchain
xtensa: Use PCI_HEADER_TYPE_MFD instead of literal
xtensa: replace <asm-generic/export.h> with <linux/export.h>
xtensa: fix variants path in the Kconfig help
|
|
Pull ARM updates from Russell King:
- add missing neon instructions for the neon support hook
- arrange for davinci to select PINCTRL
- try VMA lock-base page fault handling first
- use memblock_alloc_try_nid_raw() for kasan shadow page
- dma: use kvzalloc() rather than kzalloc()/vzalloc()
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9331/1: ARM/dma-mapping: replace kzalloc() and vzalloc() with kvzalloc()
ARM: 9329/1: kasan: Use memblock_alloc_try_nid_raw for shadow page
ARM: 9328/1: mm: try VMA lock-based page fault handling first
ARM: 9330/1: davinci: also select PINCTRL
ARM: 9327/1: vfp: Add missing VFP instructions to neon_support_hook
|
|
Pull microblaze updates from Michal Simek:
"Just defconfig updates:
- enable NFS, Marvell phy
- sync defconfig with the latest Kconfig layout"
* tag 'microblaze-v6.8' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: defconfig: Enable the Marvell phy driver
microblaze: Enable options to mount a rootfs via NFS
microblaze: Align defconfig with latest Kconfig layout
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup()
MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup()
MIPS: Fix typos
MIPS: Remove unused shadow GPR support from vector irq setup
MIPS: Allow vectored interrupt handler to reside everywhere for 64bit
mips: Set dump-stack arch description
mips: mm: add slab availability checking in ioremap_prot
mips: Optimize max_mapnr init procedure
mips: Fix max_mapnr being uninitialized on early stages
mips: Fix incorrect max_low_pfn adjustment
mips: dmi: Fix early remap on MIPS32
MIPS: compressed: Use correct instruction for 64 bit code
MIPS: SGI-IP27: hubio: fix nasid kernel-doc warning
MAINTAINERS: Add myself as maintainer of the Ralink architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Mark 32bit syscall helpers as clobbering memory
um: Remove unused register save/restore functions
um: Rely on PTRACE_SETREGSET to set FS/GS base registers
Documentation: kunit: Add clang UML coverage example
arch: um: Add Clang coverage support
um: time-travel: fix time corruption
um: net: Fix return type of uml_net_start_xmit()
um: Always inline stub functions
um: Do not use printk in userspace trampoline
um: Reap winch thread if it fails
um: Do not use printk in SIGWINCH helper thread
um: Don't use vfprintf() for os_info()
um: Make errors to stop ptraced child fatal during startup
um: Drop NULL check from start_userspace
um: Drop support for hosts without SYSEMU_SINGLESTEP support
um: document arch_futex_atomic_op_inuser
um: mmu: remove stub_pages
um: Fix naming clash between UML and scheduler
um: virt-pci: fix platform map offset
|
|
1, Increase NR_CPUS to 256.
2, Enable some cgroup options.
3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options.
4, Enable some CMA/DMA_CMA options.
5, Enable some F2FS options.
6, Enable some DMABUF/UDMABUF options.
7, Enable some USB4 and NTB options.
8, Enable some networking options (MPTCP).
9, Enable Loongson-specific drivers: APB DMA, ASoC.
10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine.
11, Remove obsolete SECURITY_SELINUX_DISABLE.
12, Regenerate the whole file to keep the order of options be the same as
the latest source code.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The test_tag test triggers an unhandled page fault:
# ./test_tag
[ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70
[ 130.640501] Oops[#3]:
[ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a
[ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40
[ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000
[ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000
[ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70
[ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0
[ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0
[ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000
[ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000
[ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988
[ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988
[ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 130.642658] BADV: ffff80001b898004
[ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)]
[ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd)
[ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8
[ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0
[ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000
[ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000
[ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000
[ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000
[ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558
[ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000
[ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc
[ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0
[ 130.644572] ...
[ 130.644629] Call Trace:
[ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988
[ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec
[ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0
[ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44
[ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588
[ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c
[ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94
[ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158
[ 130.645507]
[ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91
[ 130.645729]
[ 130.646418] ---[ end trace 0000000000000000 ]---
On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at
loading a BPF prog with 2039 instructions:
prog = (struct bpf_prog *)ffff80001b894000
insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048
insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page
In the build_insn() function, we are trying to access next instruction
unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next
page and can be not owned by the current process, thus an page fault is
inevitable and then segfault.
So, let's access next instruction only under `dst = imm64` context.
With this fix, we have:
# ./test_tag
test_tag: OK (40945 tests)
Fixes: bbfddb904df6f82 ("LoongArch: BPF: Avoid declare variables in switch-case")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like commit 1cf3bfc60f9836f ("bpf: Support 64-bit pointers to kfuncs")
for s390x, add support for 64-bit pointers to kfuncs for LoongArch.
Since the infrastructure is already implemented in BPF core, the only
thing need to be done is to override bpf_jit_supports_far_kfunc_call().
Before this change, several test_verifier tests failed:
# ./test_verifier | grep # | grep FAIL
#119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL
#120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL
#121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL
#122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL
#123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL
#124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL
#125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL
#126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL
#127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL
#128/p calls: invalid kfunc call: PTR_TO_BTF_ID wit |
