| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 6f1a6ae87c0c60d7c462ef8fd071f291aa7a9abb upstream.
When building the kernel with a bare-metal (ELF) toolchain, the -shared
option may not be passed down to collect2, resulting in silent corruption
of the vDSO image (in particular, the DYNAMIC section is omitted).
The effect of this corruption is that the dynamic linker fails to find
the vDSO symbols and libc is instead used for the syscalls that we
intended to optimise (e.g. gettimeofday). Functionally, there is no
issue as the sigreturn trampoline is still intact and located by the
kernel.
This patch fixes the problem by explicitly passing -shared to the linker
when building the vDSO.
Reported-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Reported-by: James Greenlaigh <james.greenhalgh@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b9bcc919931611498e856eae9bf66337330d04cc upstream.
The memmap freeing code in free_unused_memmap() computes the end of
each memblock by adding the memblock size onto the base. However,
if SPARSEMEM is enabled then the value (start) used for the base
may already have been rounded downwards to work out which memmap
entries to free after the previous memblock.
This may cause memmap entries that are in use to get freed.
In general, you're not likely to hit this problem unless there
are at least 2 memblocks and one of them is not aligned to a
sparsemem section boundary. Note that carve-outs can increase
the number of memblocks by splitting the regions listed in the
device tree.
This problem doesn't occur with SPARSEMEM_VMEMMAP, because the
vmemmap code deals with freeing the unused regions of the memmap
instead of requiring the arch code to do it.
This patch gets the memblock base out of the memblock directly when
computing the block end address to ensure the correct value is used.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 565630d503ef24e44c252bed55571b3a0d68455f upstream.
After secondary CPU boot or hotplug, the active_mm of the idle thread is
&init_mm. The init_mm.pgd (swapper_pg_dir) is only meant for TTBR1_EL1
and must not be set in TTBR0_EL1. Since when active_mm == &init_mm the
TTBR0_EL1 is already set to the reserved value, there is no need to
perform any context reset.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d57f727264f1425a94689bafc7e99e502cb135b5 upstream.
When auditing cmpxchg call sites, Chuck noted that gcc was optimizing
away some of the desired LDs.
| do {
| new = old = *ipi_data_ptr;
| new |= 1U << msg;
| } while (cmpxchg(ipi_data_ptr, old, new) != old);
was generating to below
| 8015cef8: ld r2,[r4,0] <-- First LD
| 8015cefc: bset r1,r2,r1
|
| 8015cf00: llock r3,[r4] <-- atomic op
| 8015cf04: brne r3,r2,8015cf10
| 8015cf08: scond r1,[r4]
| 8015cf0c: bnz 8015cf00
|
| 8015cf10: brne r3,r2,8015cf00 <-- Branch doesn't go to orig LD
Although this was fixed by adding a ACCESS_ONCE in this call site, it
seems safer (for now at least) to add compiler barrier to LLSC based
cmpxchg
Reported-by: Chuck Jordan <cjordan@synopsys.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 3d9fecf6bfb8b12bc2f9a4c7109895a2a2bb9436 upstream.
We enable _CRS on all systems from 2008 and later. On older systems, we
ignore _CRS and assume the whole physical address space (excluding RAM and
other devices) is available for PCI devices, but on systems that support
physical address spaces larger than 4GB, it's doubtful that the area above
4GB is really available for PCI.
After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we
try to use that space above 4GB *first*, so we're more likely to put a
device there.
On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394,
and card reader devices unassigned (but only after Windows had been
booted). Only the sound device had a 64-bit BAR, so it was the only device
placed above 4GB, and hence the only device that didn't work.
Keep _CRS enabled even on pre-2008 systems if they support physical address
space larger than 4GB.
Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible")
Reported-and-tested-by: Juan Dayer <jdayer@outlook.com>
Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.com>
|
|
commit 42720138b06301cc8a7ee8a495a6d021c4b6a9bc upstream.
Writes were a bit racy, but hard to turn into a bug at the same time.
(Particularly because modern Linux doesn't use this feature anymore.)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[Actually the next patch makes it much, much easier to trigger the race
so I'm including this one for stable@ as well. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 8e748c8d09a9314eedb5c6367d9acfaacddcdc88 upstream.
KVM guest kernels for trap & emulate run in user mode, with a modified
set of kernel memory segments. However the fixmap address is still in
the normal KSeg3 region at 0xfffe0000 regardless, causing problems when
cache alias handling makes use of them when handling copy on write.
Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped
region when CONFIG_KVM_GUEST is defined.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9887/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1dace0116d0b05c967d94644fc4dfe96be2ecd3d upstream.
The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign
resources correctly without the information from _CRS that tells us which
address ranges are claimed by which bridge. In the bugs mentioned below,
we incorrectly assign a sound card address (this example is from 1033299):
bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored)
pci 0000:80:01.0: [1106:3288] type 0 class 0x000403
pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit]
pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff]
pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit]
BUG: unable to handle kernel paging request at ffffc90000378000
IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel]
We assigned 0xfd_0000_0000, but that is not in any of the host bridge
windows, and the sound card doesn't work.
Turn on pci=use_crs automatically for this system.
Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368
Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 72e349f1124a114435e599479c9b8d14bfd1ebcd upstream.
When we take a PMU exception or a software event we call
perf_read_regs(). This overloads regs->result with a boolean that
describes if we should use the sampled instruction address register
(SIAR) or the regs.
If the exception is in kernel, we start with the kernel regs and
backtrace through the kernel stack. At this point we switch to the
userspace regs and backtrace the user stack with perf_callchain_user().
Unfortunately these regs have not got the perf_read_regs() treatment,
so regs->result could be anything. If it is non zero,
perf_instruction_pointer() decides to use the SIAR, and we get issues
like this:
0.11% qemu-system-ppc [kernel.kallsyms] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--52.35%-- 0
| |
| |--46.39%-- __hrtimer_start_range_ns
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | |
| | |--67.08%-- _raw_spin_lock_irqsave <--- hi mum
| | | |
| | | --100.00%-- 0x7e714
| | | 0x7e714
Notice the bogus _raw_spin_irqsave when we transition from kernel
(system_call) to userspace (0x7e714). We inserted what was in the SIAR.
Add a check in regs_use_siar() to check that the regs in question
are from a PMU exception. With this fix the backtrace makes sense:
0.47% qemu-system-ppc [kernel.vmlinux] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--53.83%-- 0
| |
| |--44.73%-- hrtimer_try_to_cancel
| | kvmppc_start_thread
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | __ioctl
| | 0x7e714
| | 0x7e714
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 85e84ba31039595995dae80b277378213602891b upstream.
On VM entry, we disable access to the VFP registers in order to
perform a lazy save/restore of these registers.
On VM exit, we restore access, test if we did enable them before,
and save/restore the guest/host registers if necessary. In this
sequence, the FPEXC register is always accessed, irrespective
of the trapping configuration.
If the guest didn't touch the VFP registers, then the HCPTR access
has now enabled such access, but we're missing a barrier to ensure
architectural execution of the new HCPTR configuration. If the HCPTR
access has been delayed/reordered, the subsequent access to FPEXC
will cause a trap, which we aren't prepared to handle at all.
The same condition exists when trapping to enable VFP for the guest.
The fix is to introduce a barrier after enabling VFP access. In the
vmexit case, it can be relaxed to only takes place if the guest hasn't
accessed its view of the VFP registers, making the access to FPEXC safe.
The set_hcptr macro is modified to deal with both vmenter/vmexit and
vmtrap operations, and now takes an optional label that is branched to
when the guest hasn't touched the VFP registers.
Reported-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
softirq context
commit 0edfad5959df7379c9e554fbe8ba264ae232d321 upstream.
Since it is possible for vnet_event_napi to end up doing
vnet_control_pkt_engine -> ... -> vnet_send_attr ->
vnet_port_alloc_tx_ring -> ldc_alloc_exp_dring -> kzalloc()
(i.e., in softirq context), kzalloc() should be called with
GFP_ATOMIC from ldc_alloc_exp_dring.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.com>
|
|
commit d6c763afab142a85e4770b4bc2a5f40f256d5c5d upstream.
Since commit 8a0a9bd4db63 ('random: make get_random_int() more
random'), get_random_int() returns a random value for each call,
so comment and hack introduced in mmap_rnd() as part of commit
1d18c47c735e ('arm64: MMU fault handling and page table management')
are incorrects.
Commit 1d18c47c735e seems to use the same hack introduced by
commit a5adc91a4b44 ('powerpc: Ensure random space between stack
and mmaps'), latter copied in commit 5a0efea09f42 ('sparc64: Sharpen
address space randomization calculations.').
But both architectures were cleaned up as part of commit
fa8cbaaf5a68 ('powerpc+sparc64/mm: Remove hack in mmap randomize
layout') as hack is no more needed since commit 8a0a9bd4db63.
So the present patch removes the comment and the hack around
get_random_int() on AArch64's mmap_rnd().
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.com>
|
|
commit f104765b4f81fd74d69e0eb161e89096deade2db upstream.
If hardware doesn't support DecodeAssist - a feature that provides
more information about the intercept in the VMCB, KVM decodes the
instruction and then updates the next_rip vmcb control field.
However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS].
Since skip_emulated_instruction() doesn't verify nrip support
before accepting control.next_rip as valid, avoid writing this
field if support isn't present.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit da946aeaeadcd24ff0cda9984c6fb8ed2bfd462a upstream.
According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg.
Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[dirk.behme: Adjust moved file]
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit c80e5c0c23ce2282476fdc64c4b5e3d3a40723fd upstream.
On x86-64, __copy_instruction() always returns 0 (error) if the
instruction uses %rip-relative addressing. This is because
kernel_insn_init() is called the second time for 'insn' instance
in such cases and sets all its fields to 0.
Because of this, trying to place a kprobe on such instruction
will fail, register_kprobe() will return -EINVAL.
This patch fixes the problem.
Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20150317100918.28349.94654.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 60010e508111b2fd3d73de56f3b2c2bfc0f9eba1 upstream.
Make sure the value we are going to return is referenced in order to
avoid warnings from newer GCCs such as:
arch/arm64/include/asm/cmpxchg.h:162:3: warning: value computed is not used [-Wunused-value]
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
^
net/netfilter/nf_conntrack_core.c:674:2: note: in expansion of macro ‘cmpxchg’
cmpxchg(&nf_conntrack_hash_rnd, 0, rand);
[Modified to use the current underlying implementation as current
mainline for both cmpxchg() and cmpxchg_local() does -- broonie]
Signed-off-by: Mark Hambleton <mahamble@broadcom.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit e1dfda9ced9bea1413a736f0d578f8218a7788ec upstream.
Some users of xchg() don't bother using the return value, which results
in a compiler warning like the following (from kgdb):
In file included from linux/arch/arm64/include/asm/atomic.h:27:0,
from include/linux/atomic.h:4,
from include/linux/spinlock.h:402,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/uapi/linux/timex.h:56,
from include/linux/timex.h:56,
from include/linux/sched.h:19,
from include/linux/pid_namespace.h:4,
from kernel/debug/debug_core.c:30:
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
linux/arch/arm64/include/asm/cmpxchg.h:75:3: warning: value computed is not used [-Wunused-value]
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
^
linux/arch/arm64/include/asm/atomic.h:132:30: note: in expansion of macro ‘xchg’
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
kernel/debug/debug_core.c:504:4: note: in expansion of macro ‘atomic_xchg’
atomic_xchg(&kgdb_active, cpu);
^
This patch makes use of the same trick as we do for cmpxchg, by assigning
the return value to a dummy variable in the xchg() macro itself.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.
Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 425be5679fd292a3c36cb1fe423086708a99f11a upstream.
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b24f670b7f5b2058b95370caa9f104b3cefb9f1d upstream.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ed9244e6c534612d2b5ae47feab2f55a0d4b4ced upstream.
Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be ]
x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce upstream.
According to the imx27 documentation, fec has a 4 Kbyte
memory space map. Moreover, the actual 16 Kbyte mapping
overlaps the SCC (Security Controller) memory register
space. So, we reduce the memory register space to 4 Kbyte.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a1cae34e23b1293eccbcc8ee9b39298039c3952a upstream.
Multitheaded tests showed that the icv buffer in the current ghash
implementation is not handled correctly. A move of this working ghash
buffer value to the descriptor context fixed this. Code is tested and
verified with an multithreaded application via af_alg interface.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Gerald Schaefer <geraldsc@linux.vnet.ibm.com>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 upstream.
Recent toolchains force the TOC to be 256 byte aligned. We need
to enforce this alignment in our linker script, otherwise pointers
to our TOC variables (__toc_start, __prom_init_toc_start) could
be incorrect.
If they are bad, we die a few hundred instructions into boot.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 898761158be7682082955e3efa4ad24725305fc7 upstream.
smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages
should not be reused for different values of it. Thus, it has to be
added to the mask in kvm_mmu_pte_write.
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream.
Josh Stone reports:
I've discovered a case where both arm and arm64 will miss a ptrace
syscall-exit that they should report. If the syscall is entered
without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's
then possible to have TIF_SYSCALL_TRACE added in the middle of the
syscall, but ret_fast_syscall doesn't check this flag again.
Fix this by always checking for a syscall trace in the fast exit path.
Reported-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
allowed address space
commit 19751c07b3728748c1253627ce94e6906fa5e273 upstream.
According to Posix, if MAP_FIXED is specified mmap shall set ENOMEM if
the requested mapping exceeds the allowed range for address space of
the process. The generic code set it right, but the specific powerpc
slice_get_unmapped_area() function currently returns -EINVAL in that
case.
This patch corrects it.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 904cb3677f3adcd3d837be0a0d0b14251ba8d6f7 upstream.
New Fam15h models carry extra feature bits and extend
the MSR register space for IBS ops. Adding them here.
While at it, add functionality to read IbsBrTarget and
OpData4 depending on their availability if user wants a
PERF_SAMPLE_RAW.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <paulus@samba.org>
Cc: <acme@kernel.org>
Link: http://lkml.kernel.org/r/1415651066-13523-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 85a8885bd0e00569108aa7b5e26b89c752e3cd51 upstream.
Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC
turned on using mce_amd_inj module and the patch works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Tested-by: Arindam Nath <Arindam.Nath@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit a6dfa128ce5c414ab46b1d690f7a1b8decb8526d upstream.
A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').
As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."
As such enable this even when using 32-bit kernels.
Reported-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Prashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 11133db7a836b0cb411faa048f07a38e994d1382 upstream.
Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit f9a8c3914ba85f19c3360b19612d77c47adb8942 upstream.
Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e upstream.
The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but
instead it's specific to the board. Move the definition of it, into the
board DTSs.
Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 750e30d4076ae5e02ad13a376e96c95a2627742c upstream.
There is no crystal connected to the internal RTC on the Open Block
AX3. So let's disable it in order to prevent the kernel probing the
driver uselessly. Eventually this patches removes the following
warning message from the boot log:
"rtc-mv d0010300.rtc: internal RTC not ticking"
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit cfe8c59762244251fd9a5e281d48808095ff4090 upstream.
On imx23-olinuxino the LED turns on when level logic high is aplied to
GPIO2_1.
Fix the gpios property accordingly.
Fixes: b34aa1850244 ("ARM: dts: imx23-olinuxino: Remove unneeded "default-on"")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 0fdebe1a2f4d3a8fc03754022fabf8ba95e131a3 upstream.
The dr_mode of usb0 on imx233-olinuxino is left to default "otg".
Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the
same pin as USB_OTG_ID it's possible to disable USB host by LED toggling:
echo 0 > /sys/class/leds/green/brightness
[ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1
[ 1068.890000] usb usb1: USB disconnect, device number 1
[ 1068.920000] usb 1-1: USB disconnect, device number 2
[ 1068.920000] usb 1-1.1: USB disconnect, device number 3
[ 1069.070000] usb 1-1.2: USB disconnect, device number 4
[ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered
[ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11
This patch fixes the issue by setting dr_mode to "host" in the dts file.
Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Peter Chen <peter.chen@freescale.com>
Fixes: b49312948285 ("ARM: dts: imx23-olinuxino: Add USB host support")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 4ada77e37a773168fea484899201e272ab44ba8b upstream.
Fix a typo in the TX DMA interrupt name for AUART4.
This patch makes AUART4 operational again.
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma")
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit f90d3f0d0a11fa77918fd5497cb616dd2faa8431 upstream.
The property '#pwm-cells' is currently missing. It is not possible to
use pwm4 without this property.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Fixes: 5658a68fb578 ("ARM i.MX25: Add devicetree")
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit e4140819dadc3624accac8294881bca8a3cba4ed upstream.
A malicious signal handler / restorer can DOS the system by fudging the
user regs saved on stack, causing weird things such as sigreturn returning
to user mode PC but cpu state still being kernel mode....
Ensure that in sigreturn path status32 always has U bit; any other bogosity
(gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms.
Reproducer signal handler:
void handle_sig(int signo, siginfo_t *info, void *context)
{
ucontext_t *uc = context;
struct user_regs_struct *regs = &(uc->uc_mcontext.regs);
regs->scratch.status32 = 0;
}
Before the fix, kernel would go off to weeds like below:
--------->8-----------
[ARCLinux]$ ./signal-test
Path: /signal-test
CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65
task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000
[ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698
[EFA ]: 0x00000010
[BLINK ]: 0x2007c1ee
[ERET ]: 0x10698
[STAT32]: 0x00000000 : <--------
BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000
LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000
...
--------->8-----------
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit f4831605f2dacd12730fe73961c77253cc2ea425 upstream.
time_init invokes timer64_init (which is __init annotation)
since all of these are invoked at init time, lets maintain
consistency by ensuring time_init is marked appropriately
as well.
This fixes the following warning with CONFIG_DEBUG_SECTION_MISMATCH=y
WARNING: vmlinux.o(.text+0x3bfc): Section mismatch in reference from the function time_init() to the function .init.text:timer64_init()
The function time_init() references
the function __init timer64_init().
This is often because time_init lacks a __init
annotation or the annotation of timer64_init is wrong.
Fixes: 546a39546c64 ("C6X: time management")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 24e94454c8cb6a13634f5a2f5a01da53a546a58d upstream.
- don't lock lp->lock in the iss_net_timer for the call of iss_net_poll,
it will lock it itself;
- invert order of lp->lock and opened_lock acquisition in the
iss_net_open to make it consistent with iss_net_poll;
- replace spin_lock with spin_lock_bh when acquiring locks used in
iss_net_timer from non-atomic context;
- replace spin_lock_irqsave with spin_lock_bh in the iss_net_start_xmit
as the driver doesn't use lp->lock in the hard IRQ context;
- replace __SPIN_LOCK_UNLOCKED(lp.lock) with spin_lock_init, otherwise
lockdep is unhappy about using non-static key.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 01e84c70fe40c8111f960987bcf7f931842e6d07 upstream.
xtensa actually uses sync_file_range2 implementation, so it should
define __NR_sync_file_range2 as other architectures that use that
function. That fixes userspace interface (that apparently never worked)
and avoids special-casing xtensa in libc implementations.
See the thread ending at
http://lists.busybox.net/pipermail/uclibc/2015-February/048833.html
for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 4949009eb8d40a441dcddcd96e101e77d31cf1b2 upstream.
LCD driver is always built for the XTFPGA platform, but its base address
is not configurable, and is wrong for ML605/KC705. Its initialization
locks up KC705 board hardware.
Make the whole driver optional, and its base address and bus width
configurable. Implement 4-bit bus access method.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit f7e9e358362557c3aa2c1ec47490f29fe880a09e upstream.
This problem appears to have been introduced in 2.6.29 by commit
93197a36a9c1 "Rewrite sysfs processor cache info code".
This caused lscpu to error out on at least e500v2 devices, eg:
error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory
Some embedded powerpc systems use cache-size in DTS for the unified L2
cache size, not d-cache-size, so we need to allow for both DTS names.
Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle
this.
Fixes: 93197a36a9c1 ("powerpc: Rewrite sysfs processor cache info code")
Signed-off-by: Dave Olson <olson@cumulusnetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
