Age | Commit message (Collapse) | Author | Files | Lines |
|
commit dc2e76175417e69c41d927dba75a966399f18354 upstream.
Fix extreme slow speed (200MB takes ~20 min) on writing sdcard on
bananapi-r64 by adding reset-control for mmc1 like it's done for mmc0/emmc.
Fixes: 2c002a3049f7 ("arm64: dts: mt7622: add mmc related device nodes")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210113180919.49523-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df84fe94708985cdfb78a83148322bcd0a699472 upstream.
Since commit f086f67485c5 ("arm64: ptrace: add support for syscall
emulation"), if system call number -1 is called and the process is being
traced with PTRACE_SYSCALL, for example by strace, the seccomp check is
skipped and -ENOSYS is returned unconditionally (unless altered by the
tracer) rather than carrying out action specified in the seccomp filter.
The consequence of this is that it is not possible to reliably strace
a seccomp based implementation of a foreign system call interface in
which r7/x8 is permitted to be -1 on entry to a system call.
Also trace_sys_enter and audit_syscall_entry are skipped if a system
call is skipped.
Fix by removing the in_syscall(regs) check restoring the previous
behaviour which is like AArch32, x86 (which uses generic code) and
everything else.
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Catalin Marinas<catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Link: https://lore.kernel.org/r/90edd33b-6353-1228-791f-0336d94d5f8c@majoroak.me.uk
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a13ed1d15b07a04b1f74b2df61ff7a5e47f45dd8 upstream.
The GCM mode driver uses 16 byte aligned buffers on the stack to pass
the IV to the asm helpers, but unfortunately, the x86 port does not
guarantee that the stack pointer is 16 byte aligned upon entry in the
first place. Since the compiler is not aware of this, it will not emit
the additional stack realignment sequence that is needed, and so the
alignment is not guaranteed to be more than 8 bytes.
So instead, allocate some padding on the stack, and realign the IV
pointer by hand.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0df07d8117c3576f1603b05b84089742a118d10a upstream.
The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.
However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.
So add the missing module aliases for the various SHA implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe82de91af83a9212b6c704b1ce6cf6d129a108b upstream.
This reverts commit d9df9fb901d25b941ab2cfb5b570d91fb2abf7a3.
For the OCTEON boards, it need to patch the built-in DTB before using
it. Previously it judges if it is a built-in DTB by checking
fw_passed_dtb. But after commit 37e5c69ffd41 ("MIPS: head.S: Init
fw_passed_dtb to builtin DTB", the fw_passed_dtb is initialized even
when using built-in DTB. This causes the OCTEON boards boot broken due
to an unpatched built-in DTB is used. Revert the commit d9df9fb901d2 to
restore the codes before the fw_passed_dtb is used and then fix this
issue.
Fixed: 37e5c69ffd41 ("MIPS: head.S: Init fw_passed_dtb to builtin DTB")
Cc: stable@vger.kernel.org
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76d7fff22be3e4185ee5f9da2eecbd8188e76b2c upstream.
Commit ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO
cflags") allowed the '--target=' flag from the main Makefile to filter
through to the vDSO. However, it did not bring any of the other clang
specific flags for controlling the integrated assembler and the GNU
tools locations (--prefix=, --gcc-toolchain=, and -no-integrated-as).
Without these, we will get a warning (visible with tinyconfig):
arch/mips/vdso/elf.S:14:1: warning: DWARF2 only supports one section per
compilation unit
.pushsection .note.Linux, "a",@note ; .balign 4 ; .long 2f - 1f ; .long
4484f - 3f ; .long 0 ; 1:.asciz "Linux" ; 2:.balign 4 ; 3:
^
arch/mips/vdso/elf.S:34:2: warning: DWARF2 only supports one section per
compilation unit
.section .mips_abiflags, "a"
^
All of these flags are bundled up under CLANG_FLAGS in the main Makefile
and exported so that they can be added to Makefiles that set their own
CFLAGS. Use this value instead of filtering out '--target=' so there is
no warning and all of the tools are properly used.
Cc: stable@vger.kernel.org
Fixes: ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO cflags")
Link: https://github.com/ClangBuiltLinux/linux/issues/1256
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5373ae67c3aad1ab306cc722b5a80b831eb4d4d1 upstream.
From version 2.35, binutils can be configured with
--enable-mips-fix-loongson3-llsc=yes, which means it defaults to
-mfix-loongson3-llsc. This breaks labels which might then point at the
wrong instruction.
The workaround to explicitly pass -mno-fix-loongson3-llsc has been
added in Linux version 5.1, but is only enabled when building a Loongson
64 kernel. As vendors might use a common toolchain for building Loongson
and non-Loongson kernels, just move that workaround to
arch/mips/Makefile. At the same time update the comments to reflect the
current status.
Cc: stable@vger.kernel.org # 5.1+
Cc: YunQiang Su <syq@debian.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5360958a3cd1d876aae1f504ae014658513e1af upstream.
The JZ4760 has the HPTLB as well, but has a XBurst CPU with a D0 CPUID.
Disable the HPTLB for all XBurst CPUs with a D0 CPUID. In the case where
there is no HPTLB (e.g. for older SoCs), this won't have any side
effect.
Fixes: b02efeb05699 ("MIPS: Ingenic: Disable abandoned HPTLB function.")
Cc: <stable@vger.kernel.org> # 5.4
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8bfb676492da208bd6dde0f22dff79840dbb5051 ]
"*" is missed in size determination as we are passing register set
rather than a pointer.
Fixes: dcad7854fcce ("sky: switch to ->regset_get()")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d41053e8dc115c92b8002c3db5f545d7602498b ]
Although there has been a bit of back and forth on the subject, it
appears that invalidating TLBs requires an ISB instruction when FEAT_ETS
is not implemented by the CPU.
From the bible:
| In an implementation that does not implement FEAT_ETS, a TLB
| maintenance instruction executed by a PE, PEx, can complete at any
| time after it is issued, but is only guaranteed to be finished for a
| PE, PEx, after the execution of DSB by the PEx followed by a Context
| synchronization event
Add the missing ISB in __primary_switch, just in case.
Fixes: 3c5e9f238bc4 ("arm64: head.S: move KASLR processing out of __enable_mmu()")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210224093738.3629662-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
HugeTLB pages
[ Upstream commit c060c72ffeb448fbb5864faa1f672ebfe14dd25f ]
Zap SPTEs that are backed by ZONE_DEVICE pages when zappings SPTEs to
rebuild them as huge pages in the TDP MMU. ZONE_DEVICE huge pages are
managed differently than "regular" pages and are not compound pages.
Likewise, PageTransCompoundMap() will not detect HugeTLB, so switch
to PageCompound().
This matches the similar check in kvm_mmu_zap_collapsible_spte.
Cc: Ben Gardon <bgardon@google.com>
Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a8ed2eaac102c746d8d114f2787f06cb3e55dfb ]
Intercept INVPCID if it's disabled in the guest, even when using NPT,
as KVM needs to inject #UD in this case.
Fixes: 4407a797e941 ("KVM: SVM: Enable INVPCID feature on AMD")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210212003411.1102677-2-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9abcfcb20320e8f693e89d86573b58e6289931cb ]
The tls pointer must be pushed on the stack prior to calling nios2_clone
as it is the 5th function argument. Prior handling of the tls pointer was
done inside former called function copy_thread_tls using the r8 register
from the current_pt_regs directly. This was a bad design and resulted in
the current bug introduced in 04bd52fb.
Fixes: 04bd52fb ("nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c26958cb5a0d9053d1358258827638773f3d36ed ]
We need to take the mmap lock around find_vma() and subsequent use of the
VMA. Otherwise, we can race with concurrent operations like munmap(), which
can lead to use-after-free accesses to freed VMAs.
Fixes: 1000197d8013 ("nios2: System calls handling")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd749fe4bcb00ad80d9eece709f804bb4ac6bf1e ]
When CONFIG_EPOLL is not set/enabled, sys_oabi-compat.c has build
errors. Fix these by surrounding them with ifdef CONFIG_EPOLL/endif
and providing stubs for the "EPOLL is not set" case.
../arch/arm/kernel/sys_oabi-compat.c: In function 'sys_oabi_epoll_ctl':
../arch/arm/kernel/sys_oabi-compat.c:257:6: error: implicit declaration of function 'ep_op_has_event' [-Werror=implicit-function-declaration]
257 | if (ep_op_has_event(op) &&
| ^~~~~~~~~~~~~~~
../arch/arm/kernel/sys_oabi-compat.c:264:9: error: implicit declaration of function 'do_epoll_ctl'; did you mean 'sys_epoll_ctl'? [-Werror=implicit-function-declaration]
264 | return do_epoll_ctl(epfd, op, fd, &kernel, false);
| ^~~~~~~~~~~~
Fixes: c281634c8652 ("ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com> # from an lkp .config file
Cc: linux-arm-kernel@lists.infradead.org
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: patches@armlinux.org.uk
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3554aa2470b5db1222c31e08ec9c29ab33eabc7 ]
Fix Sparc build when CONFIG_PROC_FS is not enabled.
Fixes this build error:
arch/sparc/kernel/led.c:107:30: error: 'led_proc_ops' defined but not used [-Werror=unused-const-variable=]
107 | static const struct proc_ops led_proc_ops = {
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Lars Kotthoff <metalhead@metalhead.ws>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80bddf5c93a99e11fc9faf7e4b575d01cecd45d3 ]
Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.
Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.
WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
Selected by [y]:
- COMPAT [=y] && SPARC64 [=y]
Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60a707d0c99aff4eadb7fd334c5fd21df386723e ]
Since de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace
Access Protection"), user access helpers call user_{read|write}_access_{begin|end}
when user space access is allowed.
Commit 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") made
the mentioned helpers program a AMR special register to allow such
access for a short period of time, most of the time AMR is expected to
block user memory access by the kernel.
Since the code accesses the user space memory, unsafe_get_user() calls
might_fault() which calls arch_local_irq_restore() if either
CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
arch_local_irq_restore() then attempts to replay pending soft
interrupts as KUAP regions have hardware interrupts enabled.
If a pending interrupt happens to do user access (performance
interrupts do that), it enables access for a short period of time so
after returning from the replay, the user access state remains blocked
and if a user page fault happens - "Bug: Read fault blocked by AMR!"
appears and SIGSEGV is sent.
An example trace:
Bug: Read fault blocked by AMR!
WARNING: CPU: 0 PID: 1603 at /home/aik/p/kernel/arch/powerpc/include/asm/book3s/64/kup-radix.h:145
CPU: 0 PID: 1603 Comm: amr Not tainted 5.10.0-rc6_v5.10-rc6_a+fstn1 #24
NIP: c00000000009ece8 LR: c00000000009ece4 CTR: 0000000000000000
REGS: c00000000dc63560 TRAP: 0700 Not tainted (5.10.0-rc6_v5.10-rc6_a+fstn1)
MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 28002888 XER: 20040000
CFAR: c0000000001fa928 IRQMASK: 1
GPR00: c00000000009ece4 c00000000dc637f0 c000000002397600 000000000000001f
GPR04: c0000000020eb318 0000000000000000 c00000000dc63494 0000000000000027
GPR08: c00000007fe4de68 c00000000dfe9180 0000000000000000 0000000000000001
GPR12: 0000000000002000 c0000000030a0000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 bfffffffffffffff
GPR20: 0000000000000000 c0000000134a4020 c0000000019c2218 0000000000000fe0
GPR24: 0000000000000000 0000000000000000 c00000000d106200 0000000040000000
GPR28: 0000000000000000 0000000000000300 c00000000dc63910 c000000001946730
NIP __do_page_fault+0xb38/0xde0
LR __do_page_fault+0xb34/0xde0
Call Trace:
__do_page_fault+0xb34/0xde0 (unreliable)
handle_page_fault+0x10/0x2c
--- interrupt: 300 at strncpy_from_user+0x290/0x440
LR = strncpy_from_user+0x284/0x440
strncpy_from_user+0x2f0/0x440 (unreliable)
getname_flags+0x88/0x2c0
do_sys_openat2+0x2d4/0x5f0
do_sys_open+0xcc/0x140
system_call_exception+0x160/0x240
system_call_common+0xf0/0x27c
To fix it save/restore the AMR when replaying interrupts, and also
add a check if AMR was not blocked prior to replaying interrupts.
Originally found by syzkaller.
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use normal commit citation format and add full oops log to
change log, move kuap_check_amr() into the restore routine to
avoid warnings about unreconciled IRQ state]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d506ca97b665b95e698a53697dad99fae813c1a ]
The amount of code executed with enabled user space access (unlocked
KUAP) should be minimal. However with CONFIG_PROVE_LOCKING or
CONFIG_DEBUG_ATOMIC_SLEEP enabled, might_fault() calls into various
parts of the kernel, and may even end up replaying interrupts which in
turn may access user space and forget to restore the KUAP state.
The problem places are:
1. strncpy_from_user (and similar) which unlock KUAP and call
unsafe_get_user -> __get_user_allowed -> __get_user_nocheck()
with do_allow=false to skip KUAP as the caller took care of it.
2. __unsafe_put_user_goto() which is called with unlocked KUAP.
eg:
WARNING: CPU: 30 PID: 1 at arch/powerpc/include/asm/book3s/64/kup.h:324 arch_local_irq_restore+0x160/0x190
NIP arch_local_irq_restore+0x160/0x190
LR lock_is_held_type+0x140/0x200
Call Trace:
0xc00000007f392ff8 (unreliable)
___might_sleep+0x180/0x320
__might_fault+0x50/0xe0
filldir64+0x2d0/0x5d0
call_filldir+0xc8/0x180
ext4_readdir+0x948/0xb40
iterate_dir+0x1ec/0x240
sys_getdents64+0x80/0x290
system_call_exception+0x160/0x280
system_call_common+0xf0/0x27c
Change __get_user_nocheck() to look at `do_allow` to decide whether to
skip might_fault(). Since strncpy_from_user/etc call might_fault()
anyway before unlocking KUAP, there should be no visible change.
Drop might_fault() in __unsafe_put_user_goto() as it is only called
from unsafe_put_user(), which already has KUAP unlocked.
Since keeping might_fault() is still desirable for debugging, add
calls to it in user_[read|write]_access_begin(). That also allows us
to drop the is_kernel_addr() test, because there should be no code
using user_[read|write]_access_begin() in order to access a kernel
address.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Combine with related patch from myself, merge change logs]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210204121612.32721-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 903178d0ce6bb30ef80a3604ab9ee2b57869fbc9 ]
For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.
Go through emulation_assist_interrupt() to set REASON_ILLEGAL.
Fixes: fbbcc3bb139e ("powerpc/8xx: Remove SoftwareEmulation()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad782af87a222efc79cfb06079b0fd23d4224eaf.1612515180.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 768d70e19ba525debd571b36e6d0ab19956c63d7 ]
dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:
1. When the status is -2 (busy, call again), we call
ibm,configure-connector again immediately without checking whether
to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
causing the configuration to unnecessarily terminate.
Fix both of these issues by using rtas_busy_delay().
Fixes: ab519a011caa ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210107025900.410369-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2acb909750431030b65a0a2a17fd8afcbd813a84 ]
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b709e32ef570b8b91dfbcb63cffac4324c87799f ]
When CONFIG_IRQ_TIME_ACCOUNTING and CONFIG_VIRT_CPU_ACCOUNTING_GEN, powerpc
does not enable "sched_clock_irqtime" and can not utilize irq time
accounting.
Like x86, powerpc does not use the sched_clock_register() interface. So it
needs an dedicated call to enable_sched_clock_irqtime() to enable irq time
accounting.
Fixes: 518470fe962e ("powerpc: Add HAVE_IRQ_TIME_ACCOUNTING")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
[mpe: Add fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1603349479-26185-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 910a0cb6d259736a0c86e795d4c2f42af8d0d775 ]
PPC47x_TLBE_SIZE isn't defined for 256k pages, leading to a build
break if 256k pages is selected.
So change the kconfig so that 256k pages can't be selected for 47x.
Fixes: e7f75ad01d59 ("powerpc/47x: Base ppc476 support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Expand change log to mention build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fed79b1154c872194f98bac4422c23918325e61.1611128938.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9236f57a9e51c72ce426ccd2e53e123de7196a0f ]
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a3b8758bd6e45f7b671723b5c9fa2b69d0787ae ]
Compile-testing the ixp4xx timer with CONFIG_OF enabled but
CONFIG_TIMER_OF disabled leads to a harmless warning:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ixp4xx.o' being placed in section `__timer_of_table'
Move the select statement from the platform code into the driver
so it always gets enabled in configurations that rely on it.
Fixes: 40df14cc5cc0 ("clocksource/drivers/ixp4xx: Add OF initialization support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210103135955.3808976-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3da02421230639bf6ee5462b70b58f5b7f3b7c6 ]
Fix pm8009 compatibility string to reference pm8009 revision specific to
sm8250 platform. Also add S2 regulator to be used for qca639x.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: b1d2674e6121 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2644312052d54e2e7543c7d186899a36ed22f0bf ]
Restore the full 64-bit values of DR6 and DR7 when emulating RSM on
x86-64, as defined by both Intel's SDM and AMD's APM.
Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop
unless the SMM handler is poking into SMRAM, which it most definitely
shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields
as read-only.
Fixes: 660a5d517aaa ("KVM: x86: save/load state on SMM switch")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2732be90235347a3be4babdc9f88a1ea93970b0b ]
Don't clear the SME C-bit when reading a guest PDPTR, as the GPA (CR3) is
in the guest domain.
Barring a bizarre paravirtual use case, this is likely a benign bug. SME
is not emulated by KVM, loading SEV guest PDPTRs is doomed as KVM can't
use the correct key to read guest memory, and setting guest MAXPHYADDR
higher than the host, i.e. overlapping the C-bit, would cause faults in
the guest.
Note, for SEV guests, stripping the C-bit is technically aligned with CPU
behavior, but for KVM it's the greater of two evils. Because KVM doesn't
have access to the guest's encryption key, ignoring the C-bit would at
best result in KVM reading garbage. By keeping the C-bit, KVM will
fail its read (unless userspace creates a memslot with the C-bit set).
The guest will still undoubtedly die, as KVM will use '0' for the PDPTR
value, but that's preferable to interpreting encrypted data as a PDPTR.
Fixes: d0ec49d4de90 ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210204000117.3303214-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8790ccf8daf1a8c53b6cb8ce0c9a109274bd3fa8 ]
When building with clang when CONFIG_CPU_LOONGSON3_WORKAROUNDS is
enabled:
In file included from lib/errseq.c:4:
In file included from ./include/linux/atomic.h:7:
./arch/mips/include/asm/atomic.h:52:1: warning: converting the result of
'<<' to a boolean always evaluates to true
[-Wtautological-constant-compare]
ATOMIC_OPS(atomic64, s64)
^
./arch/mips/include/asm/atomic.h:40:9: note: expanded from macro
'ATOMIC_OPS'
return cmpxchg(&v->counter, o, n);
^
./arch/mips/include/asm/cmpxchg.h:194:7: note: expanded from macro
'cmpxchg'
if (!__SYNC_loongson3_war)
^
./arch/mips/include/asm/sync.h:147:34: note: expanded from macro
'__SYNC_loongson3_war'
# define __SYNC_loongson3_war (1 << 31)
^
While it is not wrong that the result of this shift is always true in a
boolean context, it is not a problem here. Regardless, the warning is
really noisy so rather than making the shift a boolean implicitly, use
it in an equality comparison so the shift is used as an integer value.
Fixes: 4d1dbfe6cbec ("MIPS: atomic: Emit Loongson3 sync workarounds within asm")
Fixes: a91f2a1dba44 ("MIPS: cmpxchg: Omit redundant barriers for Loongson3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 894ef530012fb5078466efdfb2c15d8b2f1565cd ]
Commit 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly") added
-fno-asynchronous-unwind-tables to KBUILD_CFLAGS to prevent compiler
from emitting .eh_frame symbols.
However, as MIPS heavily uses CFI, that's not enough. Use the
approach taken for x86 (as it also uses CFI) and explicitly put CFI
symbols into the .debug_frame section (except for VDSO).
This allows us to drop .eh_frame from DISCARDS as it's no longer
being generated.
Fixes: 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6f2a9e17b9bef7677caddb1626c2402f3e9d2bd ]
When building xway_defconfig with clang:
arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^ ~~~~~~~~~~~~~~~~~
arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^~
&
arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this
warning
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
~^~~~~~~~~~~~~~~~~~~~
1 error generated.
Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the
warning. Additionally, remove the unnecessary parentheses as this is a
simple conditional statement and shorthand '== 0' to '!'.
Fixes: 3645da0276ae ("OF: MIPS: lantiq: implement irq_domain support")
Link: https://github.com/ClangBuiltLinux/linux/issues/807
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c58734eee6a2151ba033c0dcb31902c89e310374 ]
When building with clang, the following section mismatch warning occurs:
WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in
reference from the function r4k_cache_init() to the function
.init.text:loongson2_sc_init()
This should have been fixed with commit ad4fddef5f23 ("mips: fix Section
mismatch in reference") but it was missed. Remove the improper __init
annotation like that commit did.
Fixes: 078a55fc824c ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code")
Link: https://github.com/ClangBuiltLinux/linux/issues/787
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15deb4333cd6d4e1e3216582e4c531ec40a6b060 ]
Commit 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if
faster driver is enabled") intended to hide modes from the plain NEON
driver that are also implemented by the faster bit sliced NEON one if
both are enabled. However, the defined() CPP function does not detect
if the bit sliced NEON driver is enabled as a module. So instead, let's
use IS_ENABLED() here.
Fixes: 69b6f2e817e5b ("crypto: arm64/aes-neon - limit exposed routines if ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d30337da8677cd73cb19444436b311c13e57356f ]
Compiling with the clang integrated assembler warns about
a recently added instruction:
<instantiation>:14:13: error: unknown token in expression
ldr tmp1, =#0x00020010UL
arch/arm/mach-at91/pm_suspend.S:542:2: note: while in macro instantiation
at91_plla_enable
Remove the extra '#' character that is not used for the 'ldr'
instruction when doing an indirect load of a constant.
Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210204160129.2249394-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f9942c61fa60eda7cc8e42f04bd25b7d175876e ]
Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
subnes pc, lr, #4 @@ return, still have work to do
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
s3c24xx_spi_fiq_txrx:
There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.
Fixes: bec0806cfec6 ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39be8f441f78908e97ff913571e10ec03387a63a ]
move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw
without sd-uhs-sdr50 option on VIM3L
[ 11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected
[ 11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
[ 11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
[ 11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[ 13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported
Signed-off-by: Artem Lapkin <art@khadas.com>
Fixes: f1bb924e8f5b ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210129085041.1408540-1-art@khadas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5ae2528b0b56cf054b27d48b0cb85330900082f ]
Fix `reserved` and `rfsa` unit address according to their reg address
Fixes: 7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9d9bfcadfb43b856dbcf9419de75f7420d5a225 ]
The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.
Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.
[1] https://gitlab.nic.cz/turris/mox-boot-builder
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46ecdfc1830eaa40a11d7f832089c82b0e67ea96 ]
Split up the pins for each fan. This is needed in order to control them
Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e011c9025a4691b5c734029577a920bd6c320994 ]
Split up the pins to match earlier definitions. Allows LEDs to flash
properly.
Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74477936a828a7c91a61ba7e625b7ce2299c8c98 ]
"make dtbs_check" fails with:
arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dt.yaml: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
'microchip,at24c64' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'
Fix this by dropping the bogus "at" prefix.
Fixes: a1d8a344f1ca0709 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210128110136.2293490-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02a16aa13574c8526beadfc9ae8cc9b66315fa2d ]
Commit
a7e1f67ed29f ("x86/msr: Filter MSR writes")
introduced a module parameter to disable writing to the MSR device file
and tainted the kernel upon writing. As MSR registers c |