summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-05-19powerpc/iommu: Annotate nested lock for lockdepAlexey Kardashevskiy1-2/+2
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ] The IOMMU table is divided into pools for concurrent mappings and each pool has a separate spinlock. When taking the ownership of an IOMMU group to pass through a device to a VM, we lock these spinlocks which triggers a false negative warning in lockdep (below). This fixes it by annotating the large pool's spinlock as a nest lock which makes lockdep not complaining when locking nested locks if the nest lock is locked already. === WARNING: possible recursive locking detected 5.11.0-le_syzkaller_a+fstn1 #100 Not tainted -------------------------------------------- qemu-system-ppc/4129 is trying to acquire lock: c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0 but task is already holding lock: c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(p->lock)/1); lock(&(p->lock)/1); === Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19powerpc/pseries: Stop calling printk in rtas_stop_self()Michael Ellerman1-3/+0
[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ] RCU complains about us calling printk() from an offline CPU: ============================= WARNING: suspicious RCU usage 5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted ----------------------------- kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1 Call Trace: dump_stack+0xec/0x144 (unreliable) lockdep_rcu_suspicious+0x124/0x144 __lock_acquire+0x1098/0x28b0 lock_acquire+0x128/0x600 _raw_spin_lock_irqsave+0x6c/0xc0 down_trylock+0x2c/0x70 __down_trylock_console_sem+0x60/0x140 vprintk_emit+0x1a8/0x4b0 vprintk_func+0xcc/0x200 printk+0x40/0x54 pseries_cpu_offline_self+0xc0/0x120 arch_cpu_idle_dead+0x54/0x70 do_idle+0x174/0x4a0 cpu_startup_entry+0x38/0x40 rest_init+0x268/0x388 start_kernel+0x748/0x790 start_here_common+0x1c/0x614 Which happens because by the time we get to rtas_stop_self() we are already offline. In addition the message can be spammy, and is not that helpful for users, so remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19powerpc/smp: Set numa node before updating maskSrikar Dronamraju1-3/+3
[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ] Geethika reported a trace when doing a dlpar CPU add. ------------[ cut here ]------------ WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057 CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420 REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020 CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10 c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04: c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018 #012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000 c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80 0000000000000497 0000000000000004 #012GPR16: c00000000347a258 0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20: c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3 #012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030 c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280 c0000034aefe0b00 c0000000010a2a68 NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500 LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 Call Trace: [c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable) [c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530 [c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0 [c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70 [c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20 [c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670 [c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520 [c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0 [c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78 3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0 ---[ end trace 532d9066d3d4d7ec ]--- Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated correctly before its used in setting the masks. Setting the numa_node will ensure that when cpu_cpu_mask() gets called, the correct node number is used. This code movement helped fix the above call trace. Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19powerpc/mm: Add cond_resched() while removing hpte mappingsVaibhav Jain1-1/+12
[ Upstream commit a5d6a3e73acbd619dd5b7b831762b755f9e2db80 ] While removing large number of mappings from hash page tables for large memory systems as soft-lockup is reported because of the time spent inside htap_remove_mapping() like one below: watchdog: BUG: soft lockup - CPU#8 stuck for 23s! <snip> NIP plpar_hcall+0x38/0x58 LR pSeries_lpar_hpte_invalidate+0x68/0xb0 Call Trace: 0x1fffffffffff000 (unreliable) pSeries_lpar_hpte_removebolted+0x9c/0x230 hash__remove_section_mapping+0xec/0x1c0 remove_section_mapping+0x28/0x3c arch_remove_memory+0xfc/0x150 devm_memremap_pages_release+0x180/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x28c/0x300 device_release_driver_internal+0x16c/0x280 unbind_store+0x124/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 __vfs_write+0x3c/0x70 vfs_write+0xd4/0x270 ksys_write+0xdc/0x130 system_call+0x5c/0x70 Fix this by adding a cond_resched() to the loop in htap_remove_mapping() that issues hcall to remove hpte mapping. The call to cond_resched() is issued every HZ jiffies which should prevent the soft-lockup from being reported. Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19MIPS: Loongson64: Use _CACHE_UNCACHED instead of _CACHE_UNCACHED_ACCELERATEDTiezhu Yang1-3/+0
[ Upstream commit 5e65c52ec716af6e8f51dacdaeb4a4d872249af1 ] Loongson64 processors have a writecombine issue that maybe failed to write back framebuffer used with ATI Radeon or AMD GPU at times, after commit 8a08e50cee66 ("drm: Permit video-buffers writecombine mapping for MIPS"), there exists some errors such as blurred screen and lockup, and so on. [ 60.958721] radeon 0000:03:00.0: ring 0 stalled for more than 10079msec [ 60.965315] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000112 last fence id 0x000000000000011d on ring 0) [ 60.976525] radeon 0000:03:00.0: ring 3 stalled for more than 10086msec [ 60.983156] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000374 last fence id 0x00000000000003a8 on ring 3) As discussed earlier [1], it might be better to disable writecombine on the CPU detection side because the root cause is unknown now. Actually, this patch is a temporary solution to just make it work well, it is not a proper and final solution, I hope someone will have a better solution to fix this issue in the future. [1] https://lore.kernel.org/patchwork/patch/1285542/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19powerpc/32: Statically initialise first emergency contextChristophe Leroy2-6/+2
[ Upstream commit a4719f5bb6d7dc220bffdc1b9f5ce5eaa5543581 ] The check of the emergency context initialisation in vmap_stack_overflow is buggy for the SMP case, as it compares r1 with 0 while in the SMP case r1 is offseted by the CPU id. Instead of fixing it, just perform static initialisation of the first emergency context. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19KVM/VMX: Invoke NMI non-IST entry instead of IST entryLai Jiangshan3-7/+34
commit a217a6593cec8b315d4c2f344bae33660b39b703 upstream. In VMX, the host NMI handler needs to be invoked after NMI VM-Exit. Before commit 1a5488ef0dcf6 ("KVM: VMX: Invoke NMI handler via indirect call instead of INTn"), this was done by INTn ("int $2"). But INTn microcode is relatively expensive, so the commit reworked NMI VM-Exit handling to invoke the kernel handler by function call. But this missed a detail. The NMI entry point for direct invocation is fetched from the IDT table and called on the kernel stack. But on 64-bit the NMI entry installed in the IDT expects to be invoked on the IST stack. It relies on the "NMI executing" variable on the IST stack to work correctly, which is at a fixed position in the IST stack. When the entry point is unexpectedly called on the kernel stack, the RSP-addressed "NMI executing" variable is obviously also on the kernel stack and is "uninitialized" and can cause the NMI entry code to run in the wrong way. Provide a non-ist entry point for VMX which shares the C-function with the regular NMI entry and invoke the new asm entry point instead. On 32-bit this just maps to the regular NMI entry point as 32-bit has no ISTs and is not affected. [ tglx: Made it independent for backporting, massaged changelog ] Fixes: 1a5488ef0dcf6 ("KVM: VMX: Invoke NMI handler via indirect call instead of INTn") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Lai Jiangshan <laijs@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87r1imi8i1.ffs@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19KVM: x86/mmu: Remove the defunct update_pte() paging hookSean Christopherson3-51/+2
commit c5e2184d1544f9e56140791eff1a351bea2e63b9 upstream. Remove the update_pte() shadow paging logic, which was obsoleted by commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"), but never removed. As pointed out by Yu, KVM never write protects leaf page tables for the purposes of shadow paging, and instead marks their associated shadow page as unsync so that the guest can write PTEs at will. The update_pte() path, which predates the unsync logic, optimizes COW scenarios by refreshing leaf SPTEs when they are written, as opposed to zapping the SPTE, restarting the guest, and installing the new SPTE on the subsequent fault. Since KVM no longer write-protects leaf page tables, update_pte() is unreachable and can be dropped. Reported-by: Yu Zhang <yu.c.zhang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210115004051.4099250-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14arm64: Remove arm64_dma32_phys_limit and its usesCatalin Marinas2-17/+19
commit d78050ee35440d7879ed94011c52994b8932e96e upstream. With the introduction of a dynamic ZONE_DMA range based on DT or IORT information, there's no need for CMA allocations from the wider ZONE_DMA32 since on most platforms ZONE_DMA will cover the 32-bit addressable range. Remove the arm64_dma32_phys_limit and set arm64_dma_phys_limit to cover the smallest DMA range required on the platform. CMA allocation and crashkernel reservation now go in the dynamically sized ZONE_DMA, allowing correct functionality on RPi4. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Zhou <chenzhou10@huawei.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> # On RPi4B Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14ia64: fix EFI_DEBUG buildSergei Trofimovich1-5/+6
[ Upstream commit e3db00b79d74caaf84cd9e1d4927979abfd0d7c9 ] When enabled local debugging via `#define EFI_DEBUG 1` noticed build failure: arch/ia64/kernel/efi.c:564:8: error: 'i' undeclared (first use in this function) While at it fixed benign string format mismatches visible only when EFI_DEBUG is enabled: arch/ia64/kernel/efi.c:589:11: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Wformat=] Link: https://lkml.kernel.org/r/20210328212246.685601-1-slyfox@gentoo.org Fixes: 14fb42090943559 ("efi: Merge EFI system table revision and vendor checks") Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVMSean Christopherson2-0/+6
[ Upstream commit dbdd096a5a74b94f6b786a47baef2085859b0dce ] Disable pass-through of the FS and GS base MSRs for 32-bit KVM. Intel's SDM unequivocally states that the MSRs exist if and only if the CPU supports x86-64. FS_BASE and GS_BASE are mostly a non-issue; a clever guest could opportunistically use the MSRs without issue. KERNEL_GS_BASE is a bigger problem, as a clever guest would subtly be broken if it were migrated, as KVM disallows software access to the MSRs, and unlike the direct variants, KERNEL_GS_BASE needs to be explicitly migrated as it's not captured in the VMCS. Fixes: 25c5f225beda ("KVM: VMX: Enable MSR Bitmap feature") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210422023831.3473491-1-seanjc@google.com> [*NOT* for stable kernels. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for ↵Kunihiko Hayashi2-3/+3
RTL8211E [ Upstream commit dcabb06bf127b3e0d3fbc94a2b65dd56c2725851 ] UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for ↵Kunihiko Hayashi1-1/+1
RTL8211E [ Upstream commit 9ba585cc5b56ea14a453ba6be9bdb984ed33471a ] UniPhier PXs2 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: e3cc931921d2 ("ARM: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')Christophe Leroy1-1/+1
[ Upstream commit 8a87a507714386efc39c3ae6fa24d4f79846b522 ] AS arch/powerpc/platforms/52xx/lite5200_sleep.o arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages: arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression In the following code, 'addi' is wrong, has to be 'add' /* local udelay in sram is needed */ udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */ mullw r12, r12, r11 mftb r13 /* start */ addi r12, r13, r12 /* end */ Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/perf: Fix the threshold event selection for memory events in power10Athira Rajeev1-2/+2
[ Upstream commit 66d9b7492887d34c711bc05b36c22438acba51b4 ] Memory events (mem-loads and mem-stores) currently use the threshold event selection as issue to finish. Power10 supports issue to complete as part of thresholding which is more appropriate for mem-loads and mem-stores. Hence fix the event code for memory events to use issue to complete. Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1614840015-1535-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/64: Fix the definition of the fixmap areaChristophe Leroy3-2/+16
[ Upstream commit 9ccba66d4d2aff9a3909aa77d57ea8b7cc166f3c ] At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is validDavid Edmondson1-6/+3
[ Upstream commit d9e46d344e62a0d56fd86a8289db5bed8a57c92e ] If the VM entry/exit controls for loading/saving MSR_EFER are either not available (an older processor or explicitly disabled) or not used (host and guest values are the same), reading GUEST_IA32_EFER from the VMCS returns an inaccurate value. Because of this, in dump_vmcs() don't use GUEST_IA32_EFER to decide whether to print the PDPTRs - always do so if the fields exist. Fixes: 4eb64dce8d0a ("KVM: x86: dump VMCS on invalid entry") Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20210318120841.133123-2-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/smp: Reintroduce cpu_core_maskSrikar Dronamraju2-7/+37
[ Upstream commit c47f892d7aa62765bf0689073f75990b4517a4cf ] Daniel reported that with Commit 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask") QEMU was unable to set single NUMA node SMP topologies such as: -smp 8,maxcpus=8,cores=2,threads=2,sockets=2 i.e he expected 2 sockets in one NUMA node. The above commit helped to reduce boot time on Large Systems for example 4096 vCPU single socket QEMU instance. PAPR is silent on having more than one socket within a NUMA node. cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the number of sockets is different from the number of NUMA nodes. One option is to reintroduce cpu_core_mask but use a slightly different method to arrive at the cpu_core_mask. Previously each CPU's chip-id would be compared with all other CPU's chip-id to verify if both the CPUs were related at the chip level. Now if a CPU 'A' is found related / (unrelated) to another CPU 'B', all the thread siblings of 'A' and thread siblings of 'B' are automatically marked as related / (unrelated). Also if a platform doesn't support ibm,chip-id property, i.e its cpu_to_chip_id returns -1, cpu_core_map holds a copy of cpu_cpu_mask(). Fixes: 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask") Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/pseries: extract host bridge from pci_bus prior to bus removalTyrel Datwyler1-1/+3
[ Upstream commit 38d0b1c9cec71e6d0f3bddef0bbce41d05a3e796 ] The pci_bus->bridge reference may no longer be valid after pci_bus_remove() resulting in passing a bad value to device_unregister() for the associated bridge device. Store the host_bridge reference in a separate variable prior to pci_bus_remove(). Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal") Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14MIPS: pci-legacy: stop using of_pci_range_to_resourceIlya Lipnitskiy1-2/+7
[ Upstream commit 3ecb9dc1581eebecaee56decac70e35365260866 ] Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change"). Most MIPS platforms do not define PCI_IOBASE, nor implement pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS platforms. of_pci_range_to_resource passes the _start address_ of the IO range into pci_address_to_pio, which then checks it against IO_SPACE_LIMIT and fails, because for MIPS platforms that use pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much higher than 0xffff. In fact, pci-mt7621 in staging already works around this problem, see commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set resource limits") So just stop using of_pci_range_to_resource, which does not work for MIPS. Fixes PCI errors like: pci_bus 0000:00: root bus resource [io 0xffffffff] Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/xive: Fix xmon command "dxi"Cédric Le Goater1-4/+10
[ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ] When under xmon, the "dxi" command dumps the state of the XIVE interrupts. If an interrupt number is specified, only the state of the associated XIVE interrupt is dumped. This form of the command lacks an irq_data parameter which is nevertheless used by xmon_xive_get_irq_config(), leading to an xmon crash. Fix that by doing a lookup in the system IRQ mapping to query the IRQ descriptor data. Invalid interrupt numbers, or not belonging to the XIVE IRQ domain, OPAL event interrupt number for instance, should be caught by the previous query done at the firmware level. Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/xive: Drop check on irq_data in xive_core_debug_show()Cédric Le Goater1-11/+10
[ Upstream commit a74ce5926b20cd0e6d624a9b2527073a96dfed7f ] When looping on IRQ descriptor, irq_data is always valid. Fixes: 930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exitNicholas Piggin1-0/+3
[ Upstream commit 5088eb4092df12d701af8e0e92860b7186365279 ] The host CTRL (runlatch) value is not restored after guest exit. The host CTRL should always be 1 except in CPU idle code, so this can result in the host running with runlatch clear, and potentially switching to a different vCPU which then runs with runlatch clear as well. This has little effect on P9 machines, CTRL is only responsible for some PMU counter logic in the host and so other than corner cases of software relying on that, or explicitly reading the runlatch value (Linux does not appear to be affected but it's possible non-Linux guests could be), there should be no execution correctness problem, though it could be used as a covert channel between guests. There may be microcontrollers, firmware or monitoring tools that sample the runlatch value out-of-band, however since the register is writable by guests, these values would (should) not be relied upon for correct operation of the host, so suboptimal performance or incorrect reporting should be the worst problem. Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc: iommu: fix build when neither PCI or IBMVIO is setRandy Dunlap1-0/+1
[ Upstream commit b27dadecdf9102838331b9a0b41ffc1cfe288154 ] When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a build error. The fault injection code is not useful in that kernel config, so make the FAIL_IOMMU option depend on PCI || IBMVIO. Prevents this build error (warning escalated to error): ../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable] 178 | static struct notifier_block fail_iommu_bus_notifier = { Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/perf: Fix PMU constraint check for EBB eventsAthira Rajeev1-2/+2
[ Upstream commit 10f8f96179ecc7f69c927f6d231f6d02736cea83 ] The power PMU group constraints includes check for EBB events to make sure all events in a group must agree on EBB. This will prevent scheduling EBB and non-EBB events together. But in the existing check, settings for constraint mask and value is interchanged. Patch fixes the same. Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with below in dmesg logs. This happens because EBB event gets enabled along with a non-EBB cpu event. [35600.453346] cpu_event_pinne[41326]: illegal instruction (4) at 10004a18 nip 10004a18 lr 100049f8 code 1 in cpu_event_pinned_vs_ebb_test[10000000+10000] Test results after the patch: $ ./pmu/ebb/cpu_event_pinned_vs_ebb_test test: cpu_event_pinned_vs_ebb tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty Binding to cpu 8 EBB Handler is at 0x100050c8 read error on event 0x7fffe6bd4040! PM_RUN_INST_CMPL: result 9872 running/enabled 37930432 success: cpu_event_pinned_vs_ebb This bug was hidden by other logic until commit 1908dc911792 (perf: Tweak perf_event_attr::exclusive semantics). Fixes: 4df489991182 ("powerpc/perf: Add power8 EBB support") Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> [mpe: Mention commit 1908dc911792] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/64s: Fix pte update for kernel memory on radixJordan Niethe2-4/+6
[ Upstream commit b8b2f37cf632434456182e9002d63cbc4cccc50c ] When adding a PTE a ptesync is needed to order the update of the PTE with subsequent accesses otherwise a spurious fault may be raised. radix__set_pte_at() does not do this for performance gains. For non-kernel memory this is not an issue as any faults of this kind are corrected by the page fault handler. For kernel memory these faults are not handled. The current solution is that there is a ptesync in flush_cache_vmap() which should be called when mapping from the vmalloc region. However, map_kernel_page() does not call flush_cache_vmap(). This is troublesome in particular for code patching with Strict RWX on radix. In do_patch_instruction() the page frame that contains the instruction to be patched is mapped and then immediately patched. With no ordering or synchronization between setting up the PTE and writing to the page it is possible for faults. As the code patching is done using __put_user_asm_goto() the resulting fault is obscured - but using a normal store instead it can be seen: BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c Faulting instruction address: 0xc00000000008bd74 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: nop_module(PO+) [last unloaded: nop_module] CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43 NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810 REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000 CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1 This results in the kind of issue reported here: https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/ Chris Riedl suggested a reliable way to reproduce the issue: $ mount -t debugfs none /sys/kernel/debug $ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) & Turning ftrace on and off does a large amount of code patching which in usually less then 5min will crash giving a trace like: ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000) ------------[ ftrace bug ]------------ ftrace failed to modify [<c000000000bf8e5c>] napi_busy_loop+0xc/0x390 actual: 11:3b:47:4b Setting ftrace call site to call ftrace function ftrace record flags: 80000001 (1) expected tramp: c00000000006c96c ------------[ cut here ]------------ WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8 Modules linked in: nop_module(PO-) [last unloaded: nop_module] CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1 NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0 REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000 CFAR: c0000000001a9c98 IRQMASK: 0 GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022 GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8 GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118 GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000 GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008 GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8 GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020 GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0 NIP ftrace_bug+0x28c/0x2e8 LR ftrace_bug+0x288/0x2e8 Call Trace: ftrace_bug+0x288/0x2e8 (unreliable) ftrace_modify_all_code+0x168/0x210 arch_ftrace_update_code+0x18/0x30 ftrace_run_update_code+0x44/0xc0 ftrace_startup+0xf8/0x1c0 register_ftrace_function+0x4c/0xc0 function_trace_init+0x80/0xb0 tracing_set_tracer+0x2a4/0x4f0 tracing_set_trace_write+0xd4/0x130 vfs_write+0xf0/0x330 ksys_write+0x84/0x140 system_call_exception+0x14c/0x230 system_call_common+0xf0/0x27c To fix this when updating kernel memory PTEs using ptesync. Fixes: f1cb8f9beba8 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Tidy up change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14KVM: arm64: Initialize VCPU mdcr_el2 before loading itAlexandru Elisei3-28/+63
[ Upstream commit 263d6287da1433aba11c5b4046388f2cdf49675c ] When a VCPU is created, the kvm_vcpu struct is initialized to zero in kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is set to a sensible value in kvm_arm_setup_debug() later in the run loop. The result is that KVM executes for a short time with MDCR_EL2 set to zero. This has several unintended consequences: * Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM DDI 0487G.a, page D13-3820. The behavior specified by the architecture in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a value less than or equal to PMCR_EL0.N, which means that an unknown number of counters are now disabled by MDCR_EL2.HPME, which is zero. * The host configuration for the other debug features controlled by MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux doesn't use the other fields, but that might change in the future. Let's avoid both issues by initializing the VCPU's mdcr_el2 field in kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register has a consistent value after each vcpu_load(). Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14mips: bmips: fix syscon-reboot nodesÁlvaro Fernández Rojas5-5/+5
[ Upstream commit cde58b861a1d365568588adda59d42351c0c4ad3 ] Commit a23c4134955e added the clock controller nodes, incorrectly changing the syscon-reboot nodes addresses. Fixes: a23c4134955e ("MIPS: BMIPS: add clock controller nodes") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/pseries: Only register vio drivers if vio bus existsMichael Ellerman1-0/+4
[ Upstream commit 11d92156f7a862091009d7655d19c1e7de37fc7a ] The vio bus is a fake bus, which we use on pseries LPARs (guests) to discover devices provided by the hypervisor. There's no need or sense in creating the vio bus on bare metal systems. Which is why commit 4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific") made the initialisation of the vio bus only happen in LPARs. However as a result of that commit we now see errors at boot on bare metal systems: Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized. Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized. This happens because those drivers are built-in, and are calling vio_register_driver(). It in turn calls driver_register() with a reference to vio_bus_type, but we haven't registered vio_bus_type with the driver core. Fix it by also guarding vio_register_driver() with a check to see if we are on pseries. Fixes: 4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS againTiezhu Yang1-0/+1
[ Upstream commit 66633abd0642f1e89d26e15f36fb13d3a1c535ff ] After commit 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work"), bpf_probe_read{, str}() functions were no longer available on MIPS, so there exist some errors when running bpf program: root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py bpf: Failed to load program: Invalid argument [...] 11: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 [...] Exception: Failed to load BPF program count_sched: Invalid argument ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs with non-overlapping address ranges, but they can overlap in EVA mode on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will not be available. This is similar with the commit d195b1d1d119 ("powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again"). Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configurationChen Huang1-1/+1
[ Upstream commit 4fe529449d85e78972fa327999961ecc83a0b6db ] When compiling the powerpc with the SMP disabled, it shows the issue: arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’: arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration] 177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000); | ^~~~~~~~~~~~~~~~ | smp_send_stop cc1: all warnings being treated as errors make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1 make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2 make: *** [Makefile:1980: arch/powerpc] Error 2 make: *** Waiting for unfinished jobs.... We found that powerpc used ipi to implement hardlockup watchdog, so the HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP. Fixes: 2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Huang <chenhuang5@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14MIPS: loongson64: fix bug when PAGE_SIZE > 16KBHuang Pei1-1/+1
[ Upstream commit 509d36a941a3466b78d4377913623d210b162458 ] When page size larger than 16KB, arguments "vaddr + size(16KB)" in "ioremap_page_range(vaddr, vaddr + size,...)" called by "add_legacy_isa_io" is not page-aligned. As loongson64 needs at least page size 16KB to get rid of cache alias, and "vaddr" is 64KB-aligned, and 64KB is largest page size supported, rounding "size" up to PAGE_SIZE is enough for all page size supported. Fixes: 6d0068ad15e4 ("MIPS: Loongson64: Process ISA Node in DeviceTree") Signed-off-by: Huang Pei <huangpei@loongson.cn> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14MIPS: fix local_irq_{disable,enable} in asmmacro.hHuang Pei1-2/+1
[ Upstream commit 05c4e2721d7af0df7bc1378a23712a0fd16947b5 ] commit ba9196d2e005 ("MIPS: Make DIEI support as a config option") use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly, without this patch, "local_irq_disable" from entry.S in 3A1000 (with buggy di/ei) lose protection of commit e97c5b609880 ("MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus") Fixes: ba9196d2e005 ("MIPS: Make DIEI support as a config option") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/prom: Mark identical_pvr_fixup as __initNathan Chancellor1-1/+1
[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ] If identical_pvr_fixup() is not inlined, there are two modpost warnings: WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference from the function identical_pvr_fixup() to the function .init.text:of_get_flat_dt_prop() The function identical_pvr_fixup() references the function __init of_get_flat_dt_prop(). This is often because identical_pvr_fixup lacks a __init annotation or the annotation of of_get_flat_dt_prop is wrong. WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference from the function identical_pvr_fixup() to the function .init.text:identify_cpu() The function identical_pvr_fixup() references the function __init identify_cpu(). This is often because identical_pvr_fixup lacks a __init annotation or the annotation of identify_cpu is wrong. identical_pvr_fixup() calls two functions marked as __init and is only called by a function marked as __init so it should be marked as __init as well. At the same time, remove the inline keywork as it is not necessary to inline this function. The compiler is still free to do so if it feels it is worthwhile since commit 889b3c1245de ("compiler: remove CONFIG_OPTIMIZE_INLINING entirely"). Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1316 Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14powerpc/fadump: Mark fadump_calculate_reserve_size as __initNathan Chancellor1-1/+1
[ Upstream commit fbced1546eaaab57a32e56c974ea8acf10c6abd8 ] If fadump_calculate_reserve_size() is not inlined, there is a modpost warning: WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in reference from the function fadump_calculate_reserve_size() to the function .init.text:parse_crashkernel() The function fadump_calculate_reserve_size() references the function __init parse_crashkernel(). This is often because fadump_calculate_reserve_size lacks a __init annotation or the annotation of parse_crashkernel is wrong. fadump_calculate_reserve_size() calls parse_crashkernel(), which is marked as __init and fadump_calculate_reserve_size() is called from within fadump_reserve_mem(), which is also marked as __init. Mark fadump_calculate_reserve_size() as __init to fix the section mismatch. Additionally, remove the inline keyword as it is not necessary to inline this function; the compiler is still free to do so if it feels it is worthwhile since commit 889b3c1245de ("compiler: remove CONFIG_OPTIMIZE_INLINING entirely"). Fixes: 11550dc0a00b ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1300 Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14KVM: x86/mmu: Retry page faults that hit an invalid memslotSean Christopherson1-0/+8
[ Upstream commit e0c378684b6545ad2d4403bb701d0ac4932b4e95 ] Retry page faults (re-enter the guest) that hit an invalid memslot instead of treating the memslot as not existing, i.e. handling the page fault as an MMIO access. When deleting a memslot, SPTEs aren't zapped and the TLBs aren't flushed until after the memslot has been marked invalid. Handling the invalid slot as MMIO means there's a small window where a page fault could replace a valid SPTE with an MMIO SPTE. The legacy MMU handles such a scenario cleanly, but the TDP MMU assumes such behavior is impossible (see the BUG() in __handle_changed_spte()). There's really no good reason why the legacy MMU should allow such a scenario, and closing this hole allows for additional cleanups. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add