| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.11
On X1E the GPU node is disabled by default, to be enabled in the
individual devices once the developers install the required firmware.
The generic EDP panel driver used on the X1E CRD is replaced with the
Samsung ATNA45AF01 driver, in order to ensure backlight is brought back
up after being turned off.
The pin configuration for PCIe-related pins are corrected across all the
X1E targets. The PCIe controllers gain a minimum OPP vote, and PCIe
domain numbers are corrected.
WiFi calibration variant information is added to the Lenovo Yoga Slim
7x, to pick the right data from the firmware packages.
The incorrect Adreno SMMU global interrupt is corrected.
For IPQ5332, the IRQ triggers for the USB controller are corrected.
* tag 'qcom-arm64-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: qcom: x1e80100-crd: Fix backlight
arm64: dts: qcom: x1e80100-yoga-slim7x: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-yoga-slim7x: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-yoga-slim7x: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-yoga-slim7x: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-vivobook-s15: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-vivobook-s15: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-vivobook-s15: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-vivobook-s15: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-qcp: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-qcp: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-qcp: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-crd: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: fix PCIe domain numbers
...
Link: https://lore.kernel.org/r/20240826152426.1648383-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 defconfig fix for 6.11
Enable the Samsung ATNA33XC20 display panel driver, as we switched from
the generic EDP panel for some of the X1E devices in v6.11.
* tag 'qcom-arm64-defconfig-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Add CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20
Link: https://lore.kernel.org/r/20240826145736.1646729-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.11:
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
arm64: dts: layerscape: fix thermal node names length
Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes
OMAP fixes for v6.11-rc
- omap3-n900: fix accelerometer orientation
* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap3-n900: correct the accelerometer orientation
Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If ParaVirt steal time feature is enabled, there is a percpu gpa address
passed from guest vCPU and host modifies guest memory space with this gpa
address. When vCPU is reset normally, it will notify host and invalidate
gpa address.
However if VM is crashed and VMM reboots VM forcely, the vCPU reboot
notification callback will not be called in VM. Host needs invalidate
the gpa address, else host will modify guest memory during VM reboots.
Here it is invalidated from the vCPU KVM_REG_LOONGARCH_VCPU_RESET ioctl
interface.
Also funciton kvm_reset_timer() is removed at vCPU reset stage, since SW
emulated timer is only used in vCPU block state. When a vCPU is removed
from the block waiting queue, kvm_restore_timer() is called and SW timer
is cancelled. And the timer register is also cleared at VMM when a vCPU
is reset.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is
set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this
case, there are no definitions of _restore_lsx & _restore_lasx and there
are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S
and switch.S respectively, just add some ifdefs to fix these warnings.
AS arch/loongarch/kernel/fpu.o
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
AS [M] arch/loongarch/kvm/switch.o
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
MODPOST Module.symvers
ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined!
ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined!
Cc: stable@vger.kernel.org # 6.9+
Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
|
|
This reverts commit 7190401fc56fb5f02ee3d04476778ab000bbaf32.
Verifying the clock source sometimes deems the MIPS clock
to be unstable, at least in qemu.
clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large:
clocksource: 'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff
clocksource: 'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff
clocksource: Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms)
clocksource: 'MIPS' is current clocksource.
If this happens, network interfaces fail to come online.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the
check for non-zero of memblock.reserved.cnt in mmu_init() would always
be true either because memblock.reserved.cnt is initialized to 1 or
because there were memory reservations earlier.
The removal of dummy empty entry in memblock caused this check to fail
because now memblock.reserved.cnt is initialized to 0.
Remove the check for non-zero of memblock.reserved.cnt because it's
perfectly fine to have an empty memblock.reserved array that early in
boot.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
dma-direct.h is introduced in commit d4b6f1562a3c3284 ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d42524c
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Set correct timer mode on Loongson64
- Only request r4k clockevent interrupt on one CPU
* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
MIPS: Loongson64: Set timer mode in cpu-probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 kvm fixes from Catalin Marinas:
- Don't drop references on LPIs that weren't visited by the vgic-debug
iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into for-next/fixes
KVM/arm64 fixes for 6.11, round #2
- Don't drop references on LPIs that weren't visited by the
vgic-debug iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
KVM: arm64: free kvm->arch.nested_mmus with kvfree()
|
|
Symbol offsets to the KASLR base do not match symbol address in
the vmlinux image. That is the result of setting the KASLR base
to the beginning of .text section as result of an optimization.
Revert that optimization and allocate virtual memory for the
whole kernel image including __START_KERNEL bytes as per the
linker script. That allows keeping the semantics of the KASLR
base offset in sync with other architectures.
Rename __START_KERNEL to TEXT_OFFSET, since it represents the
offset of the .text section within the kernel image, rather than
a virtual address.
Still skip mapping TEXT_OFFSET bytes to save memory on pgtables
and provoke exceptions in case an attempt to access this area is
made, as no kernel symbol may reside there.
In case CONFIG_KASAN is enabled the location counter might exceed
the value of TEXT_OFFSET, while the decompressor linker script
forcefully resets it to TEXT_OFFSET, which leads to a sections
overlap link failure. Use MAX() expression to avoid that.
Reported-by: Omar Sandoval <osandov@osandov.com>
Closes: https://lore.kernel.org/linux-s390/ZnS8dycxhtXBZVky@telecaster.dhcp.thefacebook.com/
Fixes: 56b1069c40c7 ("s390/boot: Rework deployment of the kernel image")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 693d41f7c938 ("s390/mm: Restore mapping of kernel image using large pages")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
On a system with a GICv3, if a guest hasn't been configured with
GICv3 and that the host is not capable of GICv2 emulation,
a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2.
We therefore try to emulate the SGI access, only to hit a NULL
pointer as no private interrupt is allocated (no GIC, remember?).
The obvious fix is to give the guest what it deserves, in the
shape of a UNDEF exception.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820100349.3544850-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Zenghui reports that VMs backed by hugetlb pages are no longer booting
after commit fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page
faults").
Support for shadow stage-2 MMUs introduced the concept of a fault IPA
and canonical IPA to stage-2 fault handling. These are identical in the
non-nested case, as the hardware stage-2 context is always that of the
canonical IPA space.
Both addresses need to be hugepage-aligned when preparing to install a
hugepage mapping to ensure that KVM uses the correct GFN->PFN translation
and installs that at the correct IPA for the current stage-2.
And now I'm feeling thirsty after all this talk of IPAs...
Fixes: fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240822071710.2291690-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
SIE instruction performs faster when the virtual address of
SIE block matches the physical one. Pin the identity mapping
base to zero for the benefit of SIE and other instructions
that have similar performance impact. Still, randomize the
base when DEBUG_VM kernel configuration option is enabled.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The identity mapping position in virtual memory is randomized
together with the kernel mapping. That position can never
overlap with the lowcore even when the lowcore is relocated.
Prevent overlapping with the lowcore to allow independent
positioning of the identity mapping. With the current value
of the alternative lowcore address of 0x70000 the overlap
could happen in case the identity mapping is placed at zero.
This is a prerequisite for uncoupling of randomization base
of kernel image and identity mapping in virtual memory.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices".
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We recently moved the teardown of the vgic part of a vcpu inside
a critical section guarded by the config_lock. This teardown phase
involves calling into kvm_io_bus_unregister_dev(), which takes the
kvm->srcu lock.
However, this violates the established order where kvm->srcu is
taken on a memory fault (such as an MMIO access), possibly
followed by taking the config_lock if the GIC emulation requires
mutual exclusion from the other vcpus.
It therefore results in a bad lockdep splat, as reported by Zenghui.
Fix this by moving the call to kvm_io_bus_unregister_dev() outside
of the config_lock critical section. At this stage, there shouln't
be any need to hold the config_lock.
As an additional bonus, document the ordering between kvm->slots_lock,
kvm->srcu and kvm->arch.config_lock so that I cannot pretend I didn't
know about those anymore.
Fixes: 9eb18136af9f ("KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240819125045.3474845-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If there were LPIs being mapped behind our back (i.e., between .start() and
.stop()), we would put them at iter_unmark_lpis() without checking if they
were actually *marked*, which is obviously not good.
Switch to use the xa_for_each_marked() iterator to fix it.
Cc: stable@vger.kernel.org
Fixes: 85d3ccc8b75b ("KVM: arm64: vgic-debug: Use an xarray mark for debug iterator")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240817101541.1664-1-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
macro instead of the *_ERR() one in order to avoid writing -EFAULT to
the value register in case of a fault
- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
Prior to this fix, only the first element was initialised
- Move the KASAN random tag seed initialisation after the per-CPU areas
have been initialised (prng_state is __percpu)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix KASAN random tag seed initialization
arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
arm64: uaccess: correct thinko in __get_mem_asm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- reintroduce the text patching global icache flush
- fix syscall entry code to correctly initialize a0, which manifested
as a strace bug
- XIP kernels now map the entire kernel, which fixes boot under at
least DEBUG_VIRTUAL=y
- initialize all nodes in the acpi_early_node_map initializer
- fix OOB access in the Andes vendor extension probing code
- A new key for scalar misaligned access performance in hwprobe, which
correctly treat the values as an enum (as opposed to a bitmap)
* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: change XIP's kernel_map.size to be size of the entire kernel
riscv: entry: always initialize regs->a0 to -ENOSYS
riscv: Re-introduce global icache flush in patch_text_XXX()
|
|
Evan Green <evan@rivosinc.com> says:
The CPUPERF0 hwprobe key was documented and identified in code as
a bitmask value, but its contents were an enum. This produced
incorrect behavior in conjunction with the WHICH_CPUS hwprobe flag.
The first patch in this series fixes the bitmask/enum problem by
creating a new hwprobe key that returns the same data, but is
properly described as a value instead of a bitmask. The second patch
renames the value definitions in preparation for adding vector misaligned
access info. As of this version, the old defines are kept in place to
maintain source compatibility with older userspace programs.
* b4-shazam-merge:
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
Link: https://lore.kernel.org/r/20240809214444.3257596-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The out-of-bounds access is reported by UBSAN:
[ 0.000000] UBSAN: array-index-out-of-bounds in ../arch/riscv/kernel/vendor_extensions.c:41:66
[ 0.000000] index -1 is out of range for type 'riscv_isavendorinfo [32]'
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.11.0-rc2ubuntu-defconfig #2
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff94e078ba>] dump_backtrace+0x32/0x40
[ 0.000000] [<ffffffff95c83c1a>] show_stack+0x38/0x44
[ 0.000000] [<ffffffff95c94614>] dump_stack_lvl+0x70/0x9c
[ 0.000000] [<ffffffff95c94658>] dump_stack+0x18/0x20
[ 0.000000] [<ffffffff95c8bbb2>] ubsan_epilogue+0x10/0x46
[ 0.000000] [<ffffffff95485a82>] __ubsan_handle_out_of_bounds+0x94/0x9c
[ 0.000000] [<ffffffff94e09442>] __riscv_isa_vendor_extension_available+0x90/0x92
[ 0.000000] [<ffffffff94e043b6>] riscv_cpufeature_patch_func+0xc4/0x148
[ 0.000000] [<ffffffff94e035f8>] _apply_alternatives+0x42/0x50
[ 0.000000] [<ffffffff95e04196>] apply_boot_alternatives+0x3c/0x100
[ 0.000000] [<ffffffff95e05b52>] setup_arch+0x85a/0x8bc
[ 0.000000] [<ffffffff95e00ca0>] start_kernel+0xa4/0xfb6
The dereferencing using cpu should actually not happen, so remove it.
Fixes: 23c996fc2bc1 ("riscv: Extend cpufeature.c to detect vendor extensions")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814192619.276794-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, kasan_init_sw_tags() is called before setup_per_cpu_areas(),
so per_cpu(prng_state, cpu) accesses the same address regardless of the
value of "cpu", and the same seed value gets copied to the percpu area
for every CPU. Fix this by moving the call to smp_prepare_boot_cpu(),
which is the first architecture hook after setup_per_cpu_areas().
Fixes: 3c9e3aa11094 ("kasan: add tag related helper functions")
Fixes: 3f41b6093823 ("kasan: fix random seed generation for tag-based mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20240814091005.969756-1-samuel.holland@sifive.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix the unfortunate off-by-one.
Fixes: 721e38301b79 ("arm64: dts: qcom: x1e80100: Add gpu support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-h_bits-v1-1-f6c5d3ff982c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GPU on X1E80100 requires ZAP 'shader' file to be useful. Since the
file is signed by the OEM keys and might be not available by default,
disable the GPU node and drop the firmware name from the x1e80100.dtsi
file. Devices not being fused to use OEM keys can specify generic
location at `qcom/x1e80100/gen70500_zap.mbn` while enabling the GPU.
The CRD and QCP were lucky enough to work with the default settings, so
reenable the GPU on those platforms and provide correct firmware-name
(including the SoC subdir).
Fixes: 721e38301b79 ("arm64: dts: qcom: x1e80100: Add gpu support")
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20240715-x1e8-zap-name-v3-1-e7a5258c3c2e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In preparation for misaligned vector performance hwprobe keys, rename
the hwprobe key values associated with misaligned scalar accesses to
include the term SCALAR. Leave the old defines in place to maintain
source compatibility.
This change is intended to be a functional no-op.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISCV_HWPROBE_KEY_CPUPERF_0 was mistakenly flagged as a bitmask in
hwprobe_key_is_bitmask(), when in reality it was an enum value. This
causes problems when used in conjunction with RISCV_HWPROBE_WHICH_CPUS,
since SLOW, FAST, and EMULATED have values whose bits overlap with
each other. If the caller asked for the set of CPUs that was SLOW or
EMULATED, the returned set would also include CPUs that were FAST.
Introduce a new hwprobe key, RISCV_HWPROBE_KEY_MISALIGNED_PERF, which
returns the same values in response to a direct query (with no flags),
but is properly handled as an enumerated value. As a result, SLOW,
FAST, and EMULATED are all correctly treated as distinct values under
the new key when queried with the WHICH_CPUS flag.
Leave the old key in place to avoid disturbing applications which may
have already come to rely on the key, with or without its broken
behavior with respect to the WHICH_CPUS flag.
Fixes: e178bf146e4b ("RISC-V: hwprobe: Introduce which-cpus flag")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: eabd9db64ea8 ("ACPI: RISCV: Add NUMA support based on SRAT and SLIT")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/0d362a8ae50558b95685da4c821b2ae9e8cf78be.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With XIP kernel, kernel_map.size is set to be only the size of data part of
the kernel. This is inconsistent with "normal" kernel, who sets it to be
the size of the entire kernel.
More importantly, XIP kernel fails to boot if CONFIG_DEBUG_VIRTUAL is
enabled, because there are checks on virtual addresses with the assumption
that kernel_map.size is the size of the entire kernel (these checks are in
arch/riscv/mm/physaddr.c).
Change XIP's kernel_map.size to be the size of the entire kernel.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240508191917.2892064-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Otherwise when the tracer changes syscall number to -1, the kernel fails
to initialize a0 with -ENOSYS and subsequently fails to return the error
code of the failed syscall to userspace. For example, it will break
strace syscall tampering.
Fixes: 52449c17bdd1 ("riscv: entry: set a0 = -ENOSYS only when syscall != -1")
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Link: https://lore.kernel.org/r/20240627142338.5114-2-CoelacanthusHex@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: e18962491696 ("arm64: numa: rework ACPI NUMA initialization")
Cc: <stable@vger.kernel.org> # 4.19.x
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/853d7f74aa243f6f5999e203246f0d1ae92d2b61.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y version of __get_mem_asm(), we
incorrectly use _ASM_EXTABLE_##type##ACCESS_ERR() such that upon a fault
the extable fixup handler writes -EFAULT into "%w0", which is the
register containing 'x' (the result of the load).
This was a thinko in commit:
86a6a68febfcf57b ("arm64: start using 'asm goto' for get_user() when available")
Prior to that commit _ASM_EXTABLE_##type##ACCESS_ERR_ZERO() was used
such that the extable fixup handler wrote -EFAULT into "%w0" (the
register containing 'err'), and zero into "%w1" (the register containing
'x'). When the 'err' variable was removed, the extable entry was updated
incorrectly.
Writing -EFAULT to the value register is unnecessary but benign:
* We never want -EFAULT in the value register, and previously this would
have been zeroed in the extable fixup handler.
* In __get_user_error() the value is overwritten with zero explicitly in
the error path.
* The asm goto outputs cannot be used when the goto label is taken, as
older compilers (e.g. clang < 16.0.0) do not guarantee that asm goto
outputs are usable in this path and may use a stale value rather than
the value in an output register. Consequently, zeroing in the extable
fixup handler is insufficient to ensure callers see zero in the error
path.
* The expected usage of unsafe_get_user() and get_kernel_nofault()
requires that the value is not consumed in the error path.
Some versions of GCC would mis-compile asm goto with outputs, and
erroneously omit subsequent assignments, breaking the error path
handling in __get_user_error(). This was discussed at:
https://lore.kernel.org/lkml/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/
... and was fixed by removing support for asm goto with outputs on those
broken compilers in commit:
f2f6a8e887172503 ("init/Kconfig: remove CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND")
With that out of the way, we can safely replace the usage of
_ASM_EXTABLE_##type##ACCESS_ERR() with _ASM_EXTABLE_##type##ACCESS(),
leaving the value register unchanged in the case a fault is taken, as
was originally intended. This matches other architectures and matches
our __put_mem_asm().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240807103731.2498893-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't
directly emulate instructions for ES/SNP, and instead the guest must
explicitly request emulation. Unless the guest explicitly requests
emulation without accessing memory, ES/SNP relies on KVM creating an MMIO
SPTE, with the subsequent #NPF being reflected into the guest as a #VC.
But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs,
because except for ES/SNP, doing so requires setting reserved bits in the
SPTE, i.e. the SPTE can't be readable while also generating a #VC on
writes. Because KVM never creates MMIO SPTEs and jumps directly to
emulation, the guest never gets a #VC. And since KVM simply resumes the
guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU
into an infinite #NPF loop if the vCPU attempts to write read-only memory.
Disallow read-only memory for all VMs with protected state, i.e. for
upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible
to support read-only memory, as TDX uses EPT Violation #VE to reflect the
fault into the guest, e.g. KVM could configure read-only SPTEs with RX
protections and SUPPRESS_VE=0. But there is no strong use case for
supporting read-only memslots on TDX, e.g. the main historical usage is
to emulate option ROMs, but TDX disallows executing from shared memory.
And if someone comes along with a legitimate, strong use case, the
restriction can always be lifted for TDX.
Don't bother trying to retroactively apply the restriction to SEV-ES
VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't
possibly work for SEV-ES, i.e. disallowing such memslots is really just
means reporting an error to userspace instead of silently hanging vCPUs.
Trying to deal with the ordering between KVM_SEV_INIT and memslot creation
isn't worth the marginal benefit it would provide userspace.
Fixes: 26c44aa9e076 ("KVM: SEV: define VM types for SEV and SEV-ES")
Fixes: 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support")
Cc: Peter Gonda <pgonda@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240809190319.1710470-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
