| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12
ARM64 device tree and binding-only changes
- Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C
- Introduce Anbernic RG35XX-SP board
- Enable charger on RG35XX boards
- Add thermal trip points for Allwinner A64 GPU
* tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi
arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
Link: https://lore.kernel.org/r/ZtnZRhTwsBeO7Qtb@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 92b5265d38f6a ("KVM: Depend on HIGH_RES_TIMERS") added a dependency
to high resolution timers with the comment:
KVM lapic timer and tsc deadline timer based on hrtimer,
setting a leftmost node to rb tree and then do hrtimer reprogram.
If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram
do nothing and then make kvm lapic timer and tsc deadline timer fail.
That was back in 2012, where hrtimer_start_range_ns() would do the
reprogramming with hrtimer_enqueue_reprogram(). But as that was a nop with
high resolution timers disabled, this did not work. But a lot has changed
in the last 12 years.
For example, commit 49a2a07514a3a ("hrtimer: Kick lowres dynticks targets on
timer enqueue") modifies __hrtimer_start_range_ns() to work with low res
timers. There's been lots of other changes that make low res work.
ChromeOS has tested this before as well, and it hasn't seen any issues
with running KVM with high res timers disabled. There could be problems,
especially at low HZ, for guests that do not support kvmclock and rely
on precise delivery of periodic timers to keep their clock running.
This can be the APIC timer (provided by the kernel), the RTC (provided
by userspace), or the i8254 (choice of kernel/userspace). These guests
are few and far between these days, and in the case of the APIC timer +
Intel hosts we can use the preemption timer (which is TSC-based and has
better latency _and_ accuracy).
In KVM, only x86 is requiring CONFIG_HIGH_RES_TIMERS; perhaps a "depends
on HIGH_RES_TIMERS || EXPERT" could be added to virt/kvm, or a pr_warn
could be added to kvm_init if HIGH_RES_TIMERS are not enabled. But in
general, it seems that there must be other code in the kernel (maybe
sound/?) that is relying on having high-enough HZ or hrtimers but that's
not documented anywhere. Whenever you disable it you probably need to
know what you're doing and what your workload is; so the dependency is
not particularly interesting, and we can just remove it.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Message-ID: <20240821095127.45d17b19@gandalf.local.home>
[Added the last two paragraphs to the commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable all UART nodes presented on som and iot boards, and add pinctrl
function settings to these nodes.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Link: https://lore.kernel.org/r/20240819035647.306-4-ychuang570808@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Added the pinctrl node and its subnodes, the gpioa through gpion
nodes, to the MA35D1 device tree.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Link: https://lore.kernel.org/r/20240819035647.306-3-ychuang570808@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
According to the binding document, add the "syscon" compatible to the
system-management node.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Link: https://lore.kernel.org/r/20240819035647.306-2-ychuang570808@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.12:
- New Boards:
- AW419 (Amlogic C3)
- Power Controller node for Amlogic A5 SoC
- Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs
- Amlogic A4 & C3 hardware support:
- PLL, SPICC, NOND, SDCard, Ethernet, Watchdog
- Final fixes for DTBs check:
- add clock and clock-names to sound cards
- drop saradc gxlx compatible
* tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible
arm64: dts: amlogic: add clock and clock-names to sound cards
arm64: dts: amlogic: c3: fix dtbcheck warning
arm64: dts: amlogic: add C3 AW419 board
arm64: dts: amlogic: add some device nodes for C3
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: a4: add ao secure node
arm64: dts: amlogic: t7: add ao secure node
arm64: dts: amlogic: c3: add ao secure node
arm64: dts: amlogic: s4: add ao secure node
arm64: dts: amlogic: add watchdog node for A4 SoCs
arm64: dts: amlogic: enable some device nodes for S4
arm64: dts: amlogic: a5: add power domain controller node
Link: https://lore.kernel.org/r/cc8fb460-5ac0-4b16-8490-8ac9f89f1b7f@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/arm
Samsung mach/soc changes for v6.12
1. Few ARM32 machine code cleanups,
2. Add dedicated maintainer entry for ARM64 Exynos850 DTS and driver
code.
* tag 'samsung-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
ARM: s3c: remove unused declarations for s3c6400
ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
MAINTAINERS: Add entry for Samsung Exynos850 SoC
ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Link: https://lore.kernel.org/r/20240827121638.29707-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/20240901133110.2038675-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/drivers
Integrator fixes for the v6.12 kernel cycle, some of_node_put():s
were missing in the SoC drivers.
* tag 'integrator-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
bus: integrator-lm: fix OF node leak in probe()
ARM: versatile: fix OF node leak in CPUs prepare
Link: https://lore.kernel.org/r/CACRpkdahXECZXWA5uv=SZtkzU0E++fQj7QWK8kYuH0-asLUPqg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ftrace_graph_ret_addr() takes an 'idx' integer pointer that is used to
optimize the stack unwinding process. arm64 currently passes `NULL` for
this parameter which stops it from utilizing these optimizations.
Further, the current code for ftrace_graph_ret_addr() will just return
the passed in return address if it is NULL which will break this usage.
Pass a valid integer pointer to ftrace_graph_ret_addr() similar to
x86_64's stack unwinder.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Fixes: 29c1c24a2707 ("function_graph: Fix up ftrace_graph_ret_addr()")
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240618162342.28275-1-puranjay@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit "s390/sha3: Support sha3 performance enhancements"
the selftests of the sha3_256_s390 and sha3_512_s390 kernel digests
sometimes fail with:
alg: shash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="import/export"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)
or with
alg: ahash: sha3-256-s390 test failed (wrong result) on test vector 3,
cfg="digest misaligned splits crossing pages"
alg: self-tests for sha3-256 using sha3-256-s390 failed (rc=-22)
The first failure is because the newly introduced context field
'first_message_part' is not copied during export and import operations.
Because of that the value of 'first_message_part' is more or less random
after an import into a newly allocated context and may or may not fit to
the state of the imported SHA3 operation, causing an invalid hash when it
does not fit.
Save the 'first_message_part' field in the currently unused field 'partial'
of struct sha3_state, even though the meaning of 'partial' is not exactly
the same as 'first_message_part'. For the caller the returned state blob
is opaque and it must only be ensured that the state can be imported later
on by the module that exported it.
The second failure is when on entry of s390_sha_update() the flag
'first_message_part' is on, and kimd is called in the first 'if (index)'
block as well as in the second 'if (len >= bsize)' block. In this case,
the 'first_message_part' is turned off after the first kimd, but the
function code incorrectly retains the NIP flag. Reset the NIP flag after
the first kimd unconditionally besides turning 'first_message_part' off.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support for deriving protected keys from clear key token for
AES xts and HMAC keys via PCKMO instruction. Add support for
protected key generation and unwrap of protected key tokens for
these key types. Furthermore 4 new sysfs attributes are introduced:
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_128
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_256
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_512
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_1024
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add the defines for the new PCKMO functions covering
MSA 10 (AES XTS "double" keys) and MSA 11 (HMAC keys)
support.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Adding/removing large amount of pages at once to/from the CMM balloon
can result in rcu_sched stalls or workqueue lockups, because of busy
looping w/o cond_resched().
Prevent this by adding a cond_resched(). cmm_free_pages() holds a
spin_lock while looping, so it cannot be added directly to the existing
loop. Instead, introduce a wrapper function that operates on maximum 256
pages at once, and add it there.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Update the internal array of PAI extension 1 NNPA
counter string table to support specialized processor
instrumentation assist instructions.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Update the internal array of PAI crypto counter string
table with new counters supported with Message Security
Assist extension (MSA) 10 and MSA 11.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Finn Callies <fcallies@linux.ibm.com>
Tested-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 868941b14441 ("fs: remove no_llseek"), no_llseek() is
simply defined to be NULL, and a NULL llseek means seeking is
unsupported.
So for statically defined file_operations, such as all these, there's no
need or benefit to set llseek = no_llseek.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240903111951.141376-1-mpe@ellerman.id.au
|
|
The non-standard "fast endian switch" syscall was added in 2008[1],
but was never widely used. It was disabled by default in 2017[2], and
there's no evidence it's ever been used since.
Remove it entirely.
A normal endian switch syscall was added in 2015[3].
[1]: 745a14cc264b ("[POWERPC] Add fast little-endian switch system call")
[2]: 529d235a0e19 ("powerpc: Add a proper syscall for switching endianness")
[3]: 727f13616c45 ("powerpc: Disable the fast-endian switch syscall by default")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823070830.1269033-1-mpe@ellerman.id.au
|
|
Transparent hugepages (THP) are not supported when using the Hash Page
Table (HPT) MMU with 4K pages.
Currently a HPT-only 4K kernel still allows THP to be enabled, which
is misleading.
Add restrictions to the PPC_THP symbol so that if the kernel is
configured with 4K pages and only the HPT MMU (no Radix), then THP is
disabled.
Note that it's still possible to build a combined Radix/HPT kernel with 4K
pages, which does allow THP to be enabled at build time. As such the HPT
code still needs to provide some THP related symbols, to allow the build
to succeed, but those code paths are never run. See the stubs in
arch/powerpc/include/asm/book3s/64/hash-4k.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823032911.1238471-2-mpe@ellerman.id.au
|
|
Move the Kconfig symbols related to transparent hugepages (THP) under a
separate config symbol, separate from CONFIG_PPC_BOOK3S_64.
The new symbol is automatically enabled if CONFIG_PPC_BOOK3S_64 is
enabled, so there is no behaviour change, except for the existence of
the new PPC_THP symbol.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823032911.1238471-1-mpe@ellerman.id.au
|
|
The mmu_hash_ops are only assigned to during boot, so mark them
__ro_after_init to prevent any further modification.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240821080745.872151-1-mpe@ellerman.id.au
|
|
This is an adaptation of commit f3a112c0c40d ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") to powerpc.
Rethook follows the existing kretprobe implementation, but separates
it from kprobes so that it can be used by fprobe (ftrace-based
function entry/exit probes). As such, this patch also enables fprobe
to work on powerpc. The only other change compared to the existing
kretprobe implementation is doing the return address fixup in
arch_rethook_fixup_return().
Reference to other archs:
commit b57c2f124098 ("riscv: add riscv rethook implementation")
commit 7b0a096436c2 ("LoongArch: Replace kretprobe with rethook")
Note:
=====
In future, rethook will be only for kretprobe, and kretprobe
will be replaced by fprobe.
https://lore.kernel.org/all/172000134410.63468.13742222887213469474.stgit@devnote2/
We will adapt the above implementation for powerpc once its upstream.
Until then, we can have this implementation of rethook to serve
current kretprobe usecases.
Reviewed-by: Naveen Rao <naveen@kernel.org>
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240830113131.7597-1-adubey@linux.ibm.com
|
|
'struct kobj_type' is not modified. It is only used in kobject_init()
which takes a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
1885 368 16 2269 8dd arch/powerpc/platforms/pseries/vas-sysfs.o
After:
======
text data bss dec hex filename
1981 272 16 2269 8dd arch/powerpc/platforms/pseries/vas-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-3-huangxiaojia2@huawei.com
|
|
'struct kobj_type' is not modified. It is only used in kobject_init()
which takes a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
3775 256 8 4039 fc7 arch/powerpc/platforms/powernv/opal-dump.o
2679 260 8 2947 b83 arch/powerpc/platforms/powernv/opal-elog.o
After:
======
text data bss dec hex filename
3823 208 8 4039 fc7 arch/powerpc/platforms/powernv/opal-dump.o
2727 212 8 2947 b83 arch/powerpc/platforms/powernv/opal-elog.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-2-huangxiaojia2@huawei.com
|
|
'struct kobj_type' is not modified. It is only used in
kobject_init_and_add()/kobject_init() which takes
a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
7145 606 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
After:
======
text data bss dec hex filename
7193 558 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-1-huangxiaojia2@huawei.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.11:
- simple dt bindings check fix for gpio keys node name
* tag 'amlogic-arm-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8b-ec100: align GPIO keys node name with bindings
Link: https://lore.kernel.org/r/220683c1-e250-4c55-bbe5-c36e89391c32@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Arm Primecell blocks have a functional clock and a bus clock. The
Toshiba TMPV7708 only defines the bus clock (apb_pclk). Add the
"uartclk" and "sspclk" clocks to the PL011 and PL022 nodes,
respectively.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826183848.1290957-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.12
MSM8226 gains CPU frequency scaling support and CPU thermal zones wired
up. The Nokia Lumia 630 and 830 gains inertial sensors.
Samsung Galaxy S5 gains pstore functionality.
A range of fixes for DeviceTree validation issues are added.
* tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add generic compat string to RPM glink channels
ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensors
ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface
ARM: dts: qcom: msm8226: Hook up CPU cooling
ARM: dts: qcom: msm8226: Add CPU frequency scaling support
ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata node
ARM: dts: qcom: apq8064: drop reg-names on sata-phy node
ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore node
ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
ARM: dts: qcom: pma8084: add pon node
Link: https://lore.kernel.org/r/20240904193228.15466-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
* tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration
ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT
ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d
ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board
Link: https://lore.kernel.org/r/1091e600-f1e7-4d1f-b83d-c67e8073772c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: ti: mix am335x cleanups for v6.12
* tag 'omap-for-v6.12/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: ti: omap: am335x-wega: Fix audio clock provider
ARM: dts: ti: omap: am335x-regor: Fix RS485 settings
ARM: dts: omap: am335x-bone: convert NVMEM content to layout syntax
ARM: dts: am335x-bone-common: Increase MDIO reset deassert time
Link: https://lore.kernel.org/r/7hh6avark1.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.12:
- A series from Alexander Stein that improves imx93-tqma9352 board
support by adding PMIC, eMMC regulators, pad configurations, etc.
- A series from Benjamin Hahn that enables overlay for no Ethernet
device, TPM and PCIe support for imx8mp-phycore board
- A few changes from Fabio Estevam that fix dt-schema warnings for
i.MX8MM and i.MX93 based boards
- A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC
thermal zone and USB3803 HUB for colibri-imx8x board
- A great number of changes from Frank Li that improve i.MX95 based with
many device additions, and fix dt-schema warnings on various i.MX8 and
layerscape device trees
- A series from João Paulo Gonçalves to add HDMI audio, analog input,
VPU, and sound card support for Toradex Verdin and Colibri boards
- A series from Markus Niebel to improve imx93-tqma9352 board support
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- A couple of changes from Peng Fan to describe cache configuration for
i.MX93 SoC and add device tree for i.MX93-14x14-EVK board
- A series from Shengjiu Wang to improve various audio features for
imx93-11x11-evk board
- A series from Yashwanth Varakala to better describe regulator usage
for imx8mp-phyboard-pollux board
- Other random changes on various board device trees
* tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits)
arm64: dts: imx: rename gpio hog as <gpio name>-hog
arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
arm64: dts: imx8mm-var-som: drop unused top-level compatible
arm64: dts: ls1088ardb: add new RTC PCF2131 support
arm64: dts: colibri-imx8x: Cleanup comments
arm64: dts: colibri-imx8x: Add 50mhz clock for eth
arm64: dts: colibri-imx8x: Add adma_pwm
arm64: dts: colibri-imx8x: Add vpu support
arm64: dts: colibri-imx8x: Add USB3803 HUB
arm64: dts: colibri-imx8x: Add PMIC thermal zone
arm64: dts: colibri-imx8x: Add sound card
arm64: dts: colibri-imx8x: Add fxl6408 gpio expander
arm64: dts: colibri-imx8x: Add analog inputs
arm64: dts: colibri-imx8x: Add usb support
arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes
arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
arm64: dts: imx8qm: add mipi subsystem
arm64: dts: imx8: add basic mipi subsystem
...
Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
RISC-V Devicetrees for v6.12
Sopgho:
Added DMA controller for CV18XX.
Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042.
Enable SDHCI0 for HuashanPi (using cv1812h).
Some minor changes about dt-bindings for Sipeed LicheeRV Nano board
(using SG2002, and SG2002 is the new codename of CV181xC).
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux:
dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles
dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic
riscv: dts: sophgo: Add mcu device for Milk-V Pioneer
riscv: sophgo: dts: add gpio controllers for SG2042 SoC
riscv: sophgo: dts: add mmc controllers for SG2042 SoC
riscv: dts: sophgo: Add i2c device support for sg2042
riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042
riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi
riscv: dts: sophgo: cv18xx: add DMA controller
Link: https://lore.kernel.org/r/MA0P287MB28228F4FC59B057DF57D9A11FE9C2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.12
Generic Fixups/Cleanups:
- AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups
- J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges
- j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep
- j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage.
- Misc device tree warning fixups: Serdes simple-mfd fixes for
am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names
SoC Specific features and Fixes:
New boards:
- AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI
AM62:
- Thermal throttling enabled
AM62A:
- Add E5010 JPEG encoder
AM62P:
- gpio-reserved ranges
- SK: drop cts/rts for wakeup_uart0 firmware console pinmux
J722s: (AM62P variant)
- IPC/Remote proc for C7x and R5F
- gpio-reserved ranges
- EVM: Add main_uart5 description and CAN support.
AM64x:
- adc description fixes for dtbs_check warnings
- tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability
- CPSW Ethernet is now disabled by default at SoC level and enabled explicitly
at board level.
- USB property to add fall back to j721e
AM65x:
- IOT2050: Add overlays for M.2, add Eth phy LED description
- idk: Fixes for DMA causing dtbs_check warning, Add MCAN
J721e:
- SK and beagleboneai64: Fixes for inverted C6x carveouts
J721s2:
- AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup
alignment fixup.
J784s4:
- WDT clock ID fix.
- EVM: Use 4 lanes for PCIe0.
* tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits)
arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication
arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash
arm64: dts: ti: Add k3-am67a-beagley-ai
dt-bindings: arm: ti: Add BeagleY-AI
arm64: dts: ti: iot2050: Declare Ethernet PHY leds
arm64: dts: ti: k3-am65: Add ESM nodes
arm64: dts: ti: k3-am64: Add more ESM interrupt sources
arm64: dts: ti: k3-am62a: Add ESM nodes
arm64: dts: ti: k3-am62: Add comments to ESM nodes
arm64: dts: ti: k3-am62p: Fix ESM interrupt sources
arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM
arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name
arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names
arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas
arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges
arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges
arm64: dts: ti: k3-j721e: Include entire FSS region in ranges
arm64: dts: ti: k3-am65: Include entire FSS region in ranges
arm64: dts: ti: k3-am64: add USB fallback compatible to J721E
...
Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v6.12
Enable the Qualcomm refgen regulator driver, being introduced in SM8350
for DSI, as a module.
* tag 'qcom-arm64-defconfig-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module
Link: https://lore.kernel.org/r/20240904194827.16766-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.12:
- Enable ADP5585 GPIO and PWM drivers in arm64 defconfig, which are
needed by i.MX93 11x11 EVK board.
* tag 'imx-defconfig-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable ADP5585 GPIO and PWM drivers
Link: https://lore.kernel.org/r/20240904143439.211552-6-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig
TI K3 defconfig updates for v6.12
- Enable E5010 JPEG Encoder as kernel module
* tag 'ti-k3-config-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable E5010 JPEG Encoder
Link: https://lore.kernel.org/r/20240903155647.jy2uparewobeekrd@dreamless
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC changes for 6.12:
- One cleanup from Fabio Estevam to remove Ethernet refclock setting
from i.MX6SX machine code
- One change from Nathan Chancellor that annotates imx7d_enet_init() as
__init to clears up a section mismatch seen with the recent LLVM
* tag 'imx-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Annotate imx7d_enet_init() as __init
ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
Link: https://lore.kernel.org/r/20240904143439.211552-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
