| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit f8f9f21c7848 ("MIPS: Fix build error for loongson64 and sgi-ip27")
added HAVE_ARCH_NODEDATA_EXTENSION to loongson64 to silence a compilation
error that happened because loongson64 didn't define array of pg_data_t as
node_data like most other architectures did.
After rename of __node_data to node_data arch_alloc_nodedata() and
HAVE_ARCH_NODEDATA_EXTENSION can be dropped from loongson64.
Since it was the only user of HAVE_ARCH_NODEDATA_EXTENSION config option
also remove this option from arch/mips/Kconfig.
Link: https://lkml.kernel.org/r/20240807064110.1003856-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make definition of node_data match other architectures. This will allow
pulling declaration of node_data to the generic mm code in the following
commit.
Link: https://lkml.kernel.org/r/20240807064110.1003856-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit f8f9f21c7848 ("MIPS: Fix build error for loongson64 and sgi-ip27")
added HAVE_ARCH_NODEDATA_EXTENSION to sgi-ip27 to silence a compilation
error that happened because sgi-ip27 didn't define array of pg_data_t as
node_data like most other architectures did.
After addition of node_data array that matches other architectures and
after ensuring that offline nodes do not appear on node_possible_map, it
is safe to drop arch_alloc_nodedata() and HAVE_ARCH_NODEDATA_EXTENSION
from sgi-ip27.
Link: https://lkml.kernel.org/r/20240807064110.1003856-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For SGI IP27 machines node_possible_map is statically set to NODE_MASK_ALL
and it is not updated during NUMA initialization.
Ensure that it only contains nodes present in the system.
Link: https://lkml.kernel.org/r/20240807064110.1003856-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sgi-ip27 is the only system that defines NODE_DATA() differently than the
rest of NUMA machines.
Add node_data array of struct pglist pointers that will point to
__node_data[node]->pglist and redefine NODE_DATA() to use node_data array.
This will allow pulling declaration of node_data to the generic mm code in
the next commit.
Link: https://lkml.kernel.org/r/20240807064110.1003856-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
|
|
RISCV_ALTERNATIVE_EARLY will issue sbi_ecall() very early in the boot
process, before the first memory mapping is setup so we can't have any
instrumentation happening here.
In addition, when the kernel is relocatable, we must also not issue any
relocation this early since they would have been patched virtually only.
So, instead of disabling instrumentation for the whole kernel/sbi.c file
and compiling it with -fno-pie, simply move __sbi_ecall() and
__sbi_base_ecall() into their own file where this is fixed.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240813-pony-truck-3e7a83e9759e@spud/
Reported-by: syzbot+cfbcb82adf6d7279fd35@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-riscv/00000000000065062c061fcec37b@google.com/
Fixes: 1745cfafebdf ("riscv: don't use global static vars to store alternative data")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240829165048.49756-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It makes no sense to restrict physical memory size because of linear
mapping size constraints when there is no linear mapping, so only do
that when mmu is enabled.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-riscv/CAMuHMdW0bnJt5GMRtOZGkTiM7GK4UaLJCDMF_Ouq++fnDKi3_A@mail.gmail.com/
Fixes: 3b6564427aea ("riscv: Fix linear mapping checks for non-contiguous memory regions")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240827065230.145021-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
A recent change to gcc flags rv64iv as no longer valid:
cc1: sorry, unimplemented: Currently the 'V' implementation
requires the 'M' extension
and as a result vector support is disabled. Fix this by adding m
to our toolchain vector detection code.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Fixes: fa8e7cce55da ("riscv: Enable Vector code to be built")
Link: https://lore.kernel.org/r/20240819001131.1738806-1-antonb@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a missing license to vmalloc.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240729-riscv_fence_license-v1-2-7d5648069640@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a missing license to fence.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240729-riscv_fence_license-v1-1-7d5648069640@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Do not write-protect the kernel read-only and __ro_after_init sections
earlier than before mark_rodata_ro() is called. This fixes a boot issue on
parisc which is triggered by commit 91a1d97ef482 ("jump_label,module: Don't
alloc static_key_mod for __ro_after_init keys"). That commit may modify
static key contents in the __ro_after_init section at bootup, so this
section needs to be writable at least until mark_rodata_ro() is called.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Link: https://lore.kernel.org/linux-parisc/096cad5aada514255cd7b0b9dbafc768@matoro.tk/#r
Fixes: 91a1d97ef482 ("jump_label,module: Don't alloc static_key_mod for __ro_after_init keys")
Cc: stable@vger.kernel.org # v6.10+
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
spidev on the elgin-r1 got a real compatible, the rk3128 could enable its
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
* tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1
ARM: dts: rockchip: Add vpu nodes for RK3128
ARM: dts: rockchip: use constant for HCLK_SFC on rk3128
Link: https://lore.kernel.org/r/3405397.RL5eaSpR8r@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus,
Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook
Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S
With recent dtc changes making it into linux-next the Wolfvision Visualizer
overlay finally compiles without warnings. And smaller number of
improvements on a number of Radxa boards.
Interesting new additions on a soc-level are the hardware RNG on rk3568,
an additional sdmmc-controller (not supported before) on rk3328 and
v4l video codecs for the rk3588 (decoding of h.264 amongst others).
* tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits)
arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6
arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6
arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6
arm64: dts: rockchip: add Mask Rom key on NanoPC-T6
arm64: dts: rockchip: enable USB-C on NanoPC-T6
arm64: dts: rockchip: enable GPU on NanoPC-T6
arm64: dts: rockchip: add IR-receiver to NanoPC-T6
arm64: dts: rockchip: add SPI flash on NanoPC-T6
arm64: dts: rockchip: add NanoPC-T6 LTS
arm64: dts: rockchip: move NanoPC-T6 parts to DTS
arm64: dts: rockchip: prepare NanoPC-T6 for LTS board
dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
arm64: dts: rockchip: disable display subsystem only for Radxa E25
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A
arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566
dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566
dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB
arm64: dts: rockchip: Add Hardkernel ODROID-M1S
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S
...
Link: https://lore.kernel.org/r/6322098.17fYzF0512@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.12-rc1
This contains a slew of cleanups and consolidation changes for several
Orin boards and also fix some minor issues and enable more features on
the Jetson TX1.
* tag 'tegra-for-6.12-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add thermal nodes to AGX Orin SKU8
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Wire up WiFi on Jetson TX1 module
arm64: tegra: Wire up Bluetooth on Jetson TX1 module
arm64: tegra: Wire up power sensors on Jetson TX1 DevKit
arm64: tegra: Add p3767 PCIe C4 EP details
arm64: tegra: Add Tegra234 PCIe C4 EP definition
arm64: tegra: Add wp-gpio for P2597's external card slot
arm64: tegra: Fix gpio for P2597 vmmc regulator
arm64: tegra: Correct location of power-sensors for IGX Orin
arm64: tegra: enable same UARTs for Orin NX/Nano
arm64: tegra: Add DMA properties for Tegra234 UARTA
Link: https://lore.kernel.org/r/20240830141004.3195210-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP update for v6.12
Just a single update adding stdout-path to the fast models(FVP and
Foundation) which eliminates the need to specify any platform-specific
kernel command line parameters to get working earlycon or console.
* tag 'juno-update-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Set stdout-path to serial0 in the chosen node
Link: https://lore.kernel.org/r/20240830135837.2383557-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.12
1. Exynos7885: Correct amount of RAM on Samsung Galaxy A8.
2. ExynosAutov9: Add new DPUM clock controller and DPUM IOMMU (SysMMU).
3. ExynosAutov920: Add initial (incomplete) clock controllers: TOP and
PERIC0 controllers.
4. Google GS101: Add reboot and poweroff support.
5. Add binding headers with clock IDs for several devices, used by the
DTS.
* tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynosautov920: add initial CMU clock nodes in ExynosAuto v920
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
arm64: dts: exynosautov9: Add dpum SysMMU
arm64: dts: exynosautov9: add dpum clock DT nodes
dt-bindings: clock: exynosautov9: add dpum clock
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
dt-bindings: clock: exynos850: Add TMU clock
arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes
arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB
Link: https://lore.kernel.org/r/20240827121638.29707-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12
- Add support for sound, push switches, and GP LEDs on the Gray Hawk
Single development board,
- Add missing iommus properties on R-Car Gen3/Gen4 and RZ/G2 SoCs,
- Add PWM support for the R-Car V4M SoC,
- Improve Ethernet descriptions on the RZ/G2L, RZ/G2LC, and RZ/G2UL
SMARC SoMs,
- Add DMAC support for the RZ/G3S SoC,
- Add CAN-FD support for the R-Car V4M SoC and the Gray Hawk Single
development board.
* tag 'renesas-dts-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: gray-hawk-single: Add CAN-FD support
arm64: dts: renesas: r8a779h0: Add CAN-FD node
arm64: dts: renesas: r9a08g045: Add DMAC node
arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
arm64: dts: renesas: r8a779h0: Add PWM device nodes
arm64: dts: renesas: gray-hawk-single: Add GP LEDs
arm64: dts: renesas: gray-hawk-single: Add push switches
arm64: dts: renesas: r8a779h0: Add missing iommus properties
arm64: dts: renesas: r8a779g0: Add missing iommus properties
arm64: dts: renesas: r8a779a0: Add missing iommus properties
arm64: dts: renesas: r8a77980: Add missing iommus properties
arm64: dts: renesas: r8a77970: Add missing iommus property
arm64: dts: renesas: r8a77965: Add missing iommus properties
arm64: dts: renesas: r8a77961: Add missing iommus properties
arm64: dts: renesas: r8a77960: Add missing iommus properties
...
Link: https://lore.kernel.org/r/cover.1724316485.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
T-HEAD Devicetrees for v6.12
Add SPI controller node to th1520.dtsi and enable spi0 on the BeagleV
Ahead and LicheePi 4A.
The TH1520 AP_SYS clock driver landed in v6.11 so convert multiple
peripherals like mmc and uart from fixed clocks to the clock controller.
All of these patches have been successfully tested in the latest
linux-next releases.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.12' of https://github.com/pdp7/linux:
riscv: dts: thead: change TH1520 SPI node to use clock controller
riscv: dts: thead: add clock to TH1520 gpio nodes
riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
riscv: dts: thead: change TH1520 mmc nodes to use clock controller
riscv: dts: thead: change TH1520 uart nodes to use clock controller
riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
riscv: dts: thead: add basic spi node
Link: https://lore.kernel.org/r/ZsWs8QiVruMXjzPc@x1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: Default configuration changes for v6.12-rc1
This contains a single change to enable the Tegra194 PCIe endpoint
driver by default.
* tag 'tegra-for-6.12-arm64-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra194 PCIe Endpoint
Link: https://lore.kernel.org/r/20240830141004.3195210-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.12
- Enable support for AK4619 codecs and Renesas R-Car Ethernet-TSN
controllers in the ARM64 defconfig,
- Enable slab hardening and kmalloc buckets in the Renesas ARM
defconfig.
* tag 'renesas-arm-defconfig-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
Link: https://lore.kernel.org/r/cover.1724316480.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.12
It contains:
- SAM9X7 SoC defconfig flag enablement
* tag 'at91-defconfig-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable config flags for sam9x7 SoC family
Link: https://lore.kernel.org/r/20240901133110.2038675-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
IFM references
There's an erratum that prevents the PAT from working correctly:
https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/pentium-dual-core-specification-update.pdf
# Document 316515 Version 010
The kernel currently disables PAT support on those CPUs, but it
does it with some magic numbers.
Replace the magic numbers with the new "IFM" macros.
Make the check refer to the last affected CPU (INTEL_CORE_YONAH)
rather than the first fixed one. This makes it easier to find the
documentation of the erratum since Intel documents where it is
broken and not where it is fixed.
I don't think the Pentium Pro (or Pentium II) is actually affected.
But the old check included them, so it can't hurt to keep doing the
same. I'm also not completely sure about the "Pentium M" CPUs
(models 0x9 and 0xd). But, again, they were included in in the
old checks and were close Pentium III derivatives, so are likely
affected.
While we're at it, revise the comment referring to the erratum name
and making sure it is a quote of the language from the actual errata
doc. That should make it easier to find in the future when the URL
inevitably changes.
Why bother with this in the first place? It actually gets rid of one
of the very few remaining direct references to c->x86{,_model}.
No change in functionality intended.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20240829220042.1007820-1-dave.hansen@linux.intel.com
|
|
The saif[01] nodes are specific to other group of the imx287
based devices, so need to be moved to different devices description file.
Leaving them here causes issues with next revision of XEA device.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Due to some operational problems (HW) the maximal speed of the SPI
frequency for flash memory has been reduced by half.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop an empty pin configuration node placeholder, because bindings
require 'fsl,pins' property:
imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master
SAIF.
Change it accordingly, to fix the following dt-schema warnings:
saif@80042000: fsl,saif-master: True is not of type 'array'
saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The usage of the R-Car V4M CSISP bindings where merged before the
bindings where approved. At that time the family fallback compatible
where not part of the bindings, add them.
Fixes: 2bb78d9fb7c9 ("arm64: dts: renesas: r8a779h0: Add video capture nodes")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240826144352.3026980-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
To make it easier to support new R-Car Gen4 SoCs add a family fallback
compatible similar to what was done for VIN on R-Car Gen4.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240826144352.3026980-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
To make it easier to support new R-Car Gen4 SoCs add a family fallback
compatible similar to what was done for VIN on R-Car Gen4.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V4H for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240826144352.3026980-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The usage of the R-Car V4M VIN bindings where merged before the bindings
where approved. At that time the family fallback compatible was not
part of the bindings, add it.
Fixes: 2bb78d9fb7c9 ("arm64: dts: renesas: r8a779h0: Add video capture nodes")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V3U DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V4H DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V4H for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by
zone_dma_limit") optimistically assumed that device-tree dma-ranges
property describes the system DMA limits. That assumption ignores DMA
limits of individual devices that are not encoded in device tree.
Commit 833bd284a45 ("arm64: mm: fix DMA zone when dma-ranges is
missing") fixed part of the problem for platforms that do not provide
dma-ranges at all. However platforms like SM8550-HDK provide DMA bus
limit, but have devices with stronger DMA limits.
of_dma_get_max_cpu_address() does not take device limitations into
account.
These platforms implicitly rely on DMA zone in low 32-bit RAM area.
Until we find a better way to figure out the optimal DMA zone range,
restore the low RAM DMA zone we had before commit ba0fb44aed47.
Fixes: ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Closes: https://lore.kernel.org/r/1a0c7282-63e0-4add-8e38-3abe3e0a8e2f@linaro.org
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93bcf ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Dohrmann <erbse.13@gmx.de>
Message-ID: <20240902144219.3716974-1-erbse.13@gmx.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes a W=1 build error:
arch/arm/mach-dove/common.c: In function ‘dove_clk_init’:
arch/arm/mach-dove/common.c:85:40: error: variable ‘gephy’ set but not used [-Werror=unused-but-set-variable]
85 | struct clk *xor0, *xor1, *ge, *gephy;
| ^~~~~
Fixes: 521674718af0 ("ARM: dove: add clock gating control")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Kernel now supports chained p |
