Linus Torvalds [Thu, 25 Jun 2026 17:21:13 +0000 (10:21 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
- Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
- A bunch of misc gmap fixes (locking, behaviour under memory
pressure)
- Fix CMMA dirty tracking
x86:
- Tidy up some WARN_ON() and BUG_ON(), replacing them with
WARN_ON_ONCE() or KVM_BUG_ON(). All of these have obviously never
triggered, or somebody would have been annoyed earlier, but still...
- Fix missing interrupt due to stale CR8 intercept
- Add a statistic that can come in handy to debug leaks as well as
the vulnerability to a class of recently-discovered issues
- Do not ask arch/x86/kernel to export
default_cpu_present_to_apicid() just for KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
x86/apic: KVM: Use cpu_physical_id() to get APIC ID of running vCPU for AVIC
KVM: x86/mmu: Expose number of shadow MMU shadow pages as a stat
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
KVM: x86: WARN (once) if RTC pending EOI tracking goes off the rails
KVM: x86: WARN and fail kvm_set_irq() if a PIC or I/O APIC vector is invalid
KVM: x86: Bug the VM, not the kernel, if the ISR count {under,over}flows
KVM: x86/mmu: Bug the VM, not the host kernel, if KVM write-protects upper SPTEs
KVM: x86: Replace BUG_ON() with WARN_ON_ONCE() on "bad" nested GPA translation
KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()
KVM: s390: Return failure in case of failure in kvm_s390_set_cmma_bits()
KVM: s390: selftests: Fix cmma selftest
KVM: s390: Fix cmma dirty tracking
KVM: s390: Fix locking in kvm_s390_set_mem_control()
KVM: s390: Fix handle_{sske,pfmf} under memory pressure
KVM: s390: Fix code typo in gmap_protect_asce_top_level()
KVM: s390: Do not set special large pages dirty
KVM: s390: Fix dat_peek_cmma() overflow
s390/mm: Fix handling of _PAGE_UNUSED pte bit
KVM: s390: Fix typo in UCONTROL documentation
...
Linus Torvalds [Thu, 25 Jun 2026 16:56:47 +0000 (09:56 -0700)]
Merge tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
Linus Torvalds [Thu, 25 Jun 2026 16:53:31 +0000 (09:53 -0700)]
Merge tag 'io_uring-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a file reference leak in the nop opcode when used with
IOSQE_FIXED_FILE
- Preserve the SQ array entries when resizing the ring via the register
path
- Preserve the partial result for an iopoll request rather than
overwriting it
- Don't audit log IORING_OP_RECV_ZC
- Bound io_pin_pages() by the page array byte size in the memmap path
- Follow-up cleanup to the task_work mpscq conversion, getting rid of
the now-unnecessary tw_pending tracking for the !DEFER_TASKRUN path
- Switch a system_unbound_wq user over to system_dfl_wq
* tag 'io_uring-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/memmap: bound io_pin_pages() by page array byte size
io_uring: Use system_dfl_wq instead of system_unbound_wq
io_uring/register: preserve SQ array entries on resize
io_uring, audit: don't log IORING_OP_RECV_ZC
io_uring: get rid of tw_pending for !DEFER task work
io_uring/rw: preserve partial result for iopoll
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
Linus Torvalds [Thu, 25 Jun 2026 16:33:23 +0000 (09:33 -0700)]
Merge tag 'gpio-fixes-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix locking context with shared GPIOs in gpio-tegra
- fix IRQ domain leak in error path in gpio-davinci
- fix returning a potentially uninitialized integer in
gpiochip_set_multiple()
- use raw spinlock in gpio-eic-sprd and gpio-sch to address locking
context issues
- bail out of probe() if registering the GPIO chip fails in gpio-mlxbf3
- fix varible type for storing the "ngpios" property in gpio-pisosr
- fix out-of-bounds pin access in GPIO ACPI
- make GPIO ACPI core only trigger interrupts on boot that are marked
as ActiveBoth
- fix kerneldoc in gpio-tb10x
- reference the real software node of the cs5535 GPIO controller in
Geode board file
* tag 'gpio-fixes-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: fix IRQ domain leak on devm_kzalloc failure
gpio: tegra: do not call pinctrl for GPIO direction
gpio: tb10x: fix struct tb10x_gpio kernel-doc
gpiolib: initialize return value in gpiochip_set_multiple()
x86/platform/geode: reference the real node of the cs5535 GPIO controller
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
gpio: sch: use raw_spinlock_t in the irq startup path
gpiolib: acpi: Prevent out-of-bounds pin access in OperationRegion handler
gpiolib: acpi: Add robust bounds-checking for GPIO pin resources
gpio: mlxbf3: fail probe if gpiochip registration fails
gpio: pisosr: Read "ngpios" as u32
gpiolib: acpi: Only trigger ActiveBoth interrupts on boot
Linus Torvalds [Thu, 25 Jun 2026 16:20:26 +0000 (09:20 -0700)]
Merge tag 'pwrseq-fixes-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fixes from Bartosz Golaszewski:
- fix an ABBA deadlock in pwrseq unregister path
- fix a use-after-free bug in pwrseq core
- sort PCI device IDs in ascending order in pwrseq-pcie-m2
* tag 'pwrseq-fixes-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: fix ABBA deadlock in pwrseq_device_unregister()
power: sequencing: pcie-m2: Sort PCI device IDs in ascending order
pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next()
Linus Torvalds [Thu, 25 Jun 2026 16:09:38 +0000 (09:09 -0700)]
Merge tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving docs fixes, along with one document update
that fell through the cracks before"
* tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: tools: Fix typo 'ackward' to 'awkward' in unittest.rst
kdoc: xforms: ignore special static/inline macros
kdoc: xforms_lists: handle DECLARE_PER_CPU() in kernel-doc
MAINTAINERS: Fix regex for kdoc
docs: kgdb: Fix path of driver options
Documentation: tracing: fix typo in events documentation
Docs/driver-api/uio-howto: document mmap_prepare callback
docs/mm: clarify that we are not looking for LLM generated content
kernel-doc: xforms: support __SYSFS_FUNCTION_ALTERNATIVE()
Linus Torvalds [Thu, 25 Jun 2026 16:06:12 +0000 (09:06 -0700)]
Merge tag 'kbuild-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull more Kbuild updates from Nathan Chancellor:
- Link host programs with ld.lld when $(LLVM) is set to match user's
expectations that LLVM will be used exclusively during the build
process
- Fix modpost warnings from static variable name promotion that can
happen more aggressively with the recently merged distributed ThinLTO
support
- Add an optional warning for user-supplied Kconfig values that changed
after processing, such as out of range values or options that have
incorrect / missing dependencies
* tag 'kbuild-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: add optional warnings for changed input values
modpost: Ignore Clang LTO suffixes in symbol matching
kbuild: Use ld.lld for linking host programs when LLVM is set
Linus Torvalds [Thu, 25 Jun 2026 16:00:53 +0000 (09:00 -0700)]
Merge tag 'for-linus-7.2-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Lots of little tweaks.
Nothing huge, the biggest issue was a possible refcount underflow that
could cause a memory leak in some situations. Otherwise, fixing
formatting and style things and some docs typos"
* tag 'for-linus-7.2-1' of https://github.com/cminyard/linux-ipmi:
docs: ipmi: Fix path of the "hotmod" module parameter
ipmi: Drop unused assignment of platform_device_id driver data
ipmi: si: Use platform_get_irq_optional() to retrieve interrupt
ipmi: fix refcount leak in i_ipmi_request()
ipmi:ssif: Drop unused assignment of platform_device_id driver data
ipmi: Fix user refcount underflow in event delivery
ipmi: Use named initializers for struct i2c_device_id
ipmi: Use LIST_HEAD() to initialize on stack list head
ipmi:kcs: Reduce the number of retries
Linus Torvalds [Wed, 24 Jun 2026 22:06:56 +0000 (15:06 -0700)]
Merge tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Work around a 'rustc' bug by setting the 'frame-pointer' LLVM
module flag under 'CONFIG_FRAME_POINTER'.
The upcoming Rust 1.98.0 is fixed.
- Doctests: fix incorrect replacement pattern.
'kernel' crate:
- Mark 'Debug' impl as '#[inline]'"
* tag 'rust-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: Kbuild: set frame-pointer llvm module flag for CONFIG_FRAME_POINTER
rust: doctest: fix incorrect pattern in replacement
rust: bitfield: mark `Debug` impl as `#[inline]`
Linus Torvalds [Wed, 24 Jun 2026 19:48:43 +0000 (12:48 -0700)]
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
Linus Torvalds [Wed, 24 Jun 2026 19:33:40 +0000 (12:33 -0700)]
Merge tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Another round of bug fixing and some code cleanups, there are no new
features. The biggest thing to note is Georgia is being added to help
co-maintain apparmor.
Cleanups:
- replace get_zeroed_page() with kzalloc()
- remove unnecessary goto and associated label
- change fn_label_build() to return err on failure instead of NULL or
err
- free rawdata as soon as possible
- use explicit instead of implicit flex array in rawdata_f_data
- use __label_make_stale in __aa_proxy_redirect
- return correct error by propagate -ENOMEM correctly in unpack_table
- aa_label_alloc use aa_label_free on alloc failure
- add a conditional version of get_newest_label
Bug Fixes:
- mediate the implicit connect of TCP fast open sendmsg
- fix C23ism of label immediately before a declaration
- fix kernel-doc warnings
- fix spelling mistakes
- fix use-after-free in rawdata dedup loop
- Fix inverted comparison in cache_hold_inc()
- fix uninitialized pointer passed to audit_log_untrustedstring()
- don't audit files pointing to aa_null.dentry
- put secmark label after secid lookup
- fix aa_getprocattr free procattr leak on format failure
- release exe file resources on path failure
- fail policy unpack on accept2 allocation failure
- Fix return in ns_mkdir_op
- remove or add symlinks to rawdata according to export_binary
- fix NULL pointer dereference in unpack_pdb
- fix potential UAF in aa_replace_profiles
- grab ns lock and refresh when looking up changehat child profiles
- enable differential encoding
- check label build before no_new_privs test
- conditionally compile get_loaddata_common_ref()
- fix unix socket mediation cache update, and leak"
* tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (35 commits)
apparmor: advertise the tcp fast open fix is applied
apparmor: mediate the implicit connect of TCP fast open sendmsg
apparmor: fix label can not be immediately before a declaration
apparmor: fix kernel-doc warnings
apparmor: replace get_zeroed_page() with kzalloc()
security: apparmor: fix two spelling mistakes
apparmor: fix use-after-free in rawdata dedup loop
apparmor: Fix inverted comparison in cache_hold_inc()
apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
apparmor: don't audit files pointing to aa_null.dentry
apparmor: put secmark label after secid lookup
apparmor: aa_getprocattr free procattr leak on format failure
apparmor: remove unnecessary goto and associated label
apparmor: release exe file resources on path failure
apparmor: fail policy unpack on accept2 allocation failure
apparmor: Fix return in ns_mkdir_op
apparmor: remove or add symlinks to rawdata according to export_binary
apparmor: fix NULL pointer dereference in unpack_pdb
apparmor: make fn_label_build() capable of handling not supported
apparmor: change fn_label_build() call to not return NULL
...
Linus Torvalds [Wed, 24 Jun 2026 18:16:06 +0000 (11:16 -0700)]
Merge tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
Linus Torvalds [Wed, 24 Jun 2026 17:05:53 +0000 (10:05 -0700)]
Merge tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Added:
- depth limit to indx_find_buffer() to prevent stack overflow
- validate split-point offset in indx_insert_into_buffer()
- bounds check to run_get_highest_vcn()
- fileattr_get() and fileattr_set() support
- zero stale pagecache beyond valid data length
- handle delayed allocation overlap in run lookup
- validate lcns_follow in log_replay() conversion
- cap RESTART_TABLE free-chain walker at rt->used
- resize log->one_page_buf when adopting on-disk page size
- reject direct userspace writes to reserved $LX* xattrs
Fixed:
- out-of-bounds read in decompress_lznt()
- avoid -Wmaybe-uninitialized warnings
- hold ni_lock across readdir metadata walk
- preserve non-DOS attribute bits in system.dos_attrib
- validate index entry key bounds
- syncing wrong inode on DIRSYNC cross-directory rename
- validate Dirty Page Table capacity in log_replay() copy_lcns
- wrong LCN in run_remove_range() when splitting a run
- allocate iomap inline_data using alloc_page
- mount failure on 64K page-size kernels
- out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
- bound attr_off in UpdateResidentValue against data_off
- bound DeleteIndexEntryAllocation memmove length
- bound copy_lcns dp->page_lcns[] index in analysis pass
- bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
- prevent potential lcn remains uninitialized
Changed:
- bound to_move in indx_insert_into_root() before hdr_insert_head()
- call _ntfs_bad_inode() when failing to rename
- fold resident writeback into writepages loop
- force waiting for direct I/O completion
- fold file size handling into ntfs_set_size()
- reject SEEK_DATA and SEEK_HOLE past EOF early
- format code, add descriptive comments and remove non-useful"
* tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3: (34 commits)
ntfs3: reject direct userspace writes to reserved $LX* xattrs
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
fs/ntfs3: prevent potential lcn remains uninitialized
ntfs3: cap RESTART_TABLE free-chain walker at rt->used
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
fs/ntfs3: validate lcns_follow in log_replay conversion
fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
fs/ntfs3: fix mount failure on 64K page-size kernels
ntfs3: avoid another -Wmaybe-uninitialized warning
ntfs3: Allocate iomap inline_data using alloc_page
fs/ntfs3: format code, deal with comments
fs/ntfs3: reject SEEK_DATA and SEEK_HOLE past EOF early
fs/ntfs3: fold file size handling into ntfs_set_size()
fs/ntfs3: force waiting for direct I/O completion
fs/ntfs3: fold resident writeback into writepages loop
fs/ntfs3: handle delayed allocation overlap in run lookup
fs/ntfs3: zero stale pagecache beyond valid data length
...
Christoph Hellwig [Wed, 24 Jun 2026 08:00:03 +0000 (10:00 +0200)]
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
Otherwise zone append commands will miss their integrity data. While
this works "fine" for auto-PI, it break file system PI and non-PI
metadata.
With this XFS on ZNS namespace with non-PI metadata and 512 byte sectors
with PI work, while PI 4k sector formats with PI work only when Caleb's
"block: fix integrity offset/length conversions" is applied as well.
Note that unlike regular writes, zone append does need remapping as
partitions are not supported on zoned block devices.
Fixes: df3c485e0e60 ("block: switch on bio operation in bio_integrity_prep") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://patch.msgid.link/20260624080014.1998650-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 24 Jun 2026 08:00:02 +0000 (10:00 +0200)]
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
bio_integrity_alloc_buf usage of GFP_ flags is messed up. For one it
mixes GFP_NOFS and GFP_NOIO for neighbouring allocations, but it also
makes the allocations fail more often than needed. That code was copied
from bio_alloc_bioset which needs to do that so that it can punt to the
rescuer workqueue, but none of that is needed for the integrity
allocations that either sits in the file system or at the very bottom
of the I/O stack. Failing early means we'll do a fully waiting
allocation from the mempool ->alloc callback which is usually much
larger than required.
Fix this by passing a gfp_t so that the file system path can pass
GFP_NOFS and the auto-integrity code can pass GFP_NOIO, and don't
modify the allocation type except for disabling warnings.
Fixes: ec7f31b2a2d3 ("block: make bio auto-integrity deadlock safe") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://patch.msgid.link/20260624080014.1998650-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Mon, 8 Jun 2026 03:42:48 +0000 (11:42 +0800)]
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
Take a css reference under RCU, drop RCU, and then associate the bio with
the blkg. This avoids nesting queue_lock under RCU and prepares to protect
blkcg with blkcg_mutex instead of queue_lock.
Use css_tryget() instead of css_tryget_online() so swap writeback for
pages charged to a dying memcg still passes the dying css to
bio_associate_blkg_from_css(). That preserves the existing closest-live
ancestor fallback instead of charging those bios to the root blkg.
Yu Kuai [Mon, 8 Jun 2026 03:42:47 +0000 (11:42 +0800)]
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
The correct lock order is q->queue_lock before blkcg->lock, and in order
to prevent deadlock from blkcg_destroy_blkgs(), trylock is used for
q->queue_lock while blkcg->lock is already held, this is hacky.
Refactor blkcg_destroy_blkgs() to hold blkcg->lock only long enough to
get the first blkg and then release it. Then take q->queue_lock and
blkcg->lock in the correct order to destroy the blkg. This is a very cold
path, so the extra lock/unlock cycles are acceptable.
Also prepare to convert protecting blkcg with blkcg_mutex instead of
queue_lock.
Yu Kuai [Mon, 8 Jun 2026 03:42:46 +0000 (11:42 +0800)]
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
If a bio is already associated with a blkg, the blkcg is already pinned
until the bio is done, so there is no need for RCU protection. Otherwise,
protect blkcg_css() with RCU independently. Prepare to protect blkcg with
blkcg_mutex instead of queue_lock.
Yu Kuai [Mon, 8 Jun 2026 03:42:44 +0000 (11:42 +0800)]
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
With previous modification to delay freeing policy data after an RCU grace
period, prfill() can run under RCU instead of taking queue_lock. However,
policy teardown can still clear blkg->pd[plid] after blkcg_print_blkgs()
observes the policy enabled bit.
Load policy data once with READ_ONCE() and skip the blkg if teardown
already cleared it. Do the same in recursive stat walks for descendant
blkgs. Remove the stale BFQ debug queue_lock assertion because
blkcg_print_blkgs() no longer calls prfill() with queue_lock held. This
also lets ioc_qos_prfill() and ioc_cost_model_prfill() use IRQ-safe
ioc->lock locking without re-enabling IRQs while queue_lock is still held.
Yu Kuai [Mon, 8 Jun 2026 03:42:43 +0000 (11:42 +0800)]
blk-cgroup: delay freeing policy data after rcu grace period
Currently blkcg_print_blkgs() must hold RCU to iterate blkgs from a
blkcg, and prfill() must hold queue_lock to prevent policy data from
being freed by policy deactivation. As a consequence, queue_lock has to
be nested under RCU from blkcg_print_blkgs().
Delay freeing policy data until after an RCU grace period so prfill() can
be protected by RCU alone.
Yu Kuai [Mon, 8 Jun 2026 03:42:42 +0000 (11:42 +0800)]
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
blkcg_print_one_stat() will be called for each blkg:
- access blkg->iostat, which is freed from rcu callback
blkg_free_workfn();
- access policy data from pd_stat_fn(), which is freed from
pd_free_fn(), while pd_free_fn() can be called by removing blkcg or
deactivating policy;
Take blkcg->lock while iterating so the blkgs stay online and both
blkg->iostat and policy data for activated policies stay valid. Use
irq-safe locking because blkcg->lock can be nested under q->queue_lock,
which is used from IRQ completion paths.
Prepare to convert protecting blkgs from request_queue with mutex.
Cleanups:
- Simplify raid1_write_request() error handling.
(Abd-Alrhman Masalkhi)"
* 'md-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
md/raid1: honor REQ_NOWAIT when waiting for behind writes
md/raid5: always convert llbitmap bits for discard
md/raid5: validate discard support at request time
md/raid5: account discard IO
md/raid1: simplify raid1_write_request() error handling
md/raid10: fix writes_pending and barrier reference leaks on discard failures
md/raid10: fix writes_pending leak on write request failures
md/raid1: fix writes_pending and barrier reference leaks on write failures
Sean Christopherson [Fri, 12 Jun 2026 18:54:59 +0000 (11:54 -0700)]
x86/apic: KVM: Use cpu_physical_id() to get APIC ID of running vCPU for AVIC
Use cpu_physical_id() instead of default_cpu_present_to_apicid() when
getting the APIC ID of the pCPU on which a vCPU is running/loaded, as the
kernel has gone way off the rails if a vCPU is loaded on a pCPU that has
been physically removed from the system. Even if the impossible were to
happen, the absolutely worst case scenario is that hardware will ring the
AIVC doorbell on the wrong pCPU, i.e. a severely broken system will
experience mild performance issues.
Kill off KVM's superfluous kvm_cpu_get_apicid() wrapper along with the
for-KVM export of default_cpu_present_to_apicid(), as they existed purely
for the wonky AVIC usage.
Cc: Kai Huang <kai.huang@intel.com> Cc: Yosry Ahmed <yosry@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Naveen N Rao (AMD) <naveen@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Message-ID: <20260612185459.591892-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 12 Jun 2026 13:37:27 +0000 (06:37 -0700)]
KVM: x86/mmu: Expose number of shadow MMU shadow pages as a stat
Turn arch.n_used_mmu_pages into a stat, mmu_shadow_pages, as the number of
live shadow pages is arguably _the_ most critical datapoint when it comes
to analyzing the shadow MMU. Before the TDP MMU came along, i.e. when the
shadow MMU was the only MMU, explicitly tracking the number of shadow pages
wasn't as interesting, because the same information could more or less be
gleaned from the pages_{1g,2m,4k} stats. But with the TDP MMU, where the
shadow MMU is only used for nested TDP, it becomes extremely difficult, if
not impossible, to determine which SPTEs are coming from the TDP MMU, and
which are coming from the shadow MMU.
E.g. when triaging/debugging shadow MMU performance issues due to "too many
shadow pages", being able to observe that 99%+ of all shadow pages are
unsync is critical to being able to deduce that KVM is effectively leaking
shadow pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260612133727.411902-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Carlos López [Thu, 18 Jun 2026 17:43:47 +0000 (10:43 -0700)]
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
Link: https://github.com/coconut-svsm/svsm/issues/1081 Tested-by: Stefano Garzarella <sgarzare@redhat.com> Cc: stable@vger.kernel.org Fixes: eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") Signed-off-by: Carlos López <clopez@suse.de> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260618174347.1981064-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 18 Jun 2026 17:43:46 +0000 (10:43 -0700)]
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in
guest mode so that a future change can have update CR8 intercepts during
vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion.
Sean Christopherson [Thu, 18 Jun 2026 17:45:27 +0000 (10:45 -0700)]
KVM: x86: WARN (once) if RTC pending EOI tracking goes off the rails
WARN once if KVM's tracking for pending EOIs for Real-Time Clock IRQs goes
off the rails, as there's no reason to bug the host or risk a DoS due to
spamming dmesg with endless WARNs. Absolute worst case scenario, guest
time will go awry.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260618174527.1982333-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 18 Jun 2026 18:52:13 +0000 (11:52 -0700)]
KVM: x86: WARN and fail kvm_set_irq() if a PIC or I/O APIC vector is invalid
WARN and return an error up the stack if the PIC or I/O APIC encounters an
invalid vector when injecting an IRQ, as there is no danger to the host and
thus no justification for potentially panicking the kernel. Don't bug the
VM either, as the risk of corrupting the guest is minuscule, and the guest
might even be completely tolerant of a lost interrupt.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260618185213.2019937-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 18 Jun 2026 18:53:50 +0000 (11:53 -0700)]
KVM: x86: Bug the VM, not the kernel, if the ISR count {under,over}flows
Bug the VM, not the host kernel, if KVM's ISR count {under,over}flows when
tracking in-flight ISRs. There is zero danger to the host if KVM messes up
its IRQ tracking.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260618185350.2020845-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 18 Jun 2026 18:56:41 +0000 (11:56 -0700)]
KVM: x86/mmu: Bug the VM, not the host kernel, if KVM write-protects upper SPTEs
Instead of bugging the host kernel, WARN and terminate the VM if KVM
attempts to write-protect at a level that cannot use leaf SPTEs.
There is no reason to bring down the entire host; even termininating
the VM is likely overkill, but in theory a missed write could corrupt
guest memory, so play it safe.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260618185641.2022368-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 18 Jun 2026 18:57:45 +0000 (11:57 -0700)]
KVM: x86: Replace BUG_ON() with WARN_ON_ONCE() on "bad" nested GPA translation
If KVM attempts to translate what it thinks is an L2 GPA with a non-nested
MMU, simply WARN and return the GPA, i.e. trust the MMU more than the
caller, as there is zero reason to potentially panic the host kernel just
because KVM misused an API.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20260618185746.2023283-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 12 Jun 2026 22:52:41 +0000 (15:52 -0700)]
KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()
Drop a BUG_ON() that has been reachable since it was first added, way back
in 2009, and instead use get_unaligned() to perform potentially-unaligned
accesses.
For a given store, KVM x86's emulator tracks the entire value in the
destination operand, x86_emulate_ctxt.dst. If the destination is memory,
and the target splits multiple pages and/or is emulated MMIO, then KVM
handles each fragment independently. E.g. on a page split starting at page
offset 0xffc, KVM writes 4 bytes to the first page, then the remaining
bytes to the second page, using ctxt->dst as the source for both (with
appropriate offsets).
If the destination splits a page *and* hits emulated MMIO on the second
page, then KVM will complete the write to the first page, then emulate the
MMIO access to the second page. If there is a datamatch-enabled ioeventfd
at offset 0 of the second page, then KVM will process the remainder of the
store as a potential ioeventfd signal.
Putting it all together, if the guest emits a store that splits a page
starting at page offset N, and the second page has a datamatch-enabled
ioeventfd at offset 0, then KVM will check for datamatch using
&dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being
32-byte aligned, if N is not aligned to @len, the BUG_ON() fires.
E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8,
all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON()
fires due to @val being 4-byte aligned, but not 8-byte aligned.
In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM
x86 doesn't perform alignment checks on "normal" memory accesses at CPL0.
Sadly, C99 ruins all the fun; while the x86 architecture plays nice,
dereferencing an unaligned pointer directly is undefined behavior in C,
e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y.
Fixes: d34e6b175e61 ("KVM: add ioeventfd support") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260612225241.678509-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:29 +0000 (17:33 +0200)]
KVM: s390: selftests: Fix cmma selftest
The existing cmma selftest depended on the host allocating page tables
for all present memslots. Since the gmap rewrite, memory that is not
accessed by the guest might not have page tables allocated yet.
This caused the test to fail due to a mismatch in the assertion.
Fix by having the guest access also the second half of the test
memslot, thus guaranteeing that its page tables are present.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260623153331.233784-9-imbrenda@linux.ibm.com>
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:28 +0000 (17:33 +0200)]
KVM: s390: Fix cmma dirty tracking
It is possible that some guest memory areas have not been touched yet
when starting migration mode, and thus have no ptes allocated. Only
existing and allocated ptes should count toward the total of dirty cmma
entries.
When starting migration mode, enable the migration_mode flag
immediately, so that any subsequent ESSA will trap in the host and
cause cmma_dirty_pages to be increased as needed.
Subsequently, set the cmma_d bit on all existing cmma-clean PGSTEs,
increasing cmma_dirty_pages as needed. Skipping cmma-dirty pages
prevents double counting.
Conversely, when disabling migration mode, set cmma_dirty_pages to 0
and clear the cmma_d bit in all existing PGSTEs.
The invariant is that when migration mode is off, no PGSTE has its
cmma_d bit set, and cmma_dirty_pages is 0. kvm->slots_lock protects
kvm_s390_vm_start_migration() and kvm_s390_vm_stop_migration() from
each other and from kvm_s390_get_cmma_bits().
Also fix dat_get_cmma() to properly wrap around if the first attempt
reached the end of guest memory without finding cmma-dirty pages.
[ imbrenda: Moved kvm_s390_sync_request_broadcast() before gmap_set_cmma_all_dirty() ]
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260623153331.233784-8-imbrenda@linux.ibm.com>
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:26 +0000 (17:33 +0200)]
KVM: s390: Fix handle_{sske,pfmf} under memory pressure
Under heavy memory pressure, handle_sske() and handle_pfmf() might
cause an endless loop if the mmu cache runs empty, the atomic
allocations fail, and the top-up function also fails. While quite
unlikely, that scenario is not impossible.
Fix the issue by not ignoring the return value of
kvm_s390_mmu_cache_topup(), and appropriately returning an error code
in case of failure.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260623153331.233784-6-imbrenda@linux.ibm.com>
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:25 +0000 (17:33 +0200)]
KVM: s390: Fix code typo in gmap_protect_asce_top_level()
The correct length to pass to kvm_s390_get_guest_pages() is asce.tl + 1,
not asce.dt + 1. It was a typo, which, due to fortuitous circumstances,
did not cause bugs. It should nonetheless be fixed.
Fixes: e5f98a6899bd ("KVM: s390: Add some helper functions needed for vSIE") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260623153331.233784-5-imbrenda@linux.ibm.com>
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:23 +0000 (17:33 +0200)]
KVM: s390: Fix dat_peek_cmma() overflow
If userspace passes a start address that is out of bounds,
_dat_walk_gfn_range() will fail with -EFAULT, but state.end will not be
touched and will stay 0. This will cause *count to underflow and report
a very high number, and the function will end up erroneously reporting
success.
Fix by only setting *count if the end address is not smaller than the
starting address. This way invalid starting addresses will correctly
return -EFAULT and *count will correctly indicate that no values have
been returned.
Claudio Imbrenda [Tue, 23 Jun 2026 15:33:22 +0000 (17:33 +0200)]
s390/mm: Fix handling of _PAGE_UNUSED pte bit
The _PAGE_UNUSED softbit should not really be lying around. Its sole
purpose is to signal to try_to_unmap_one() and try_to_migrate_one()
that the page can be discarded instead of being moved / swapped.
KVM has no way to know why a page is being unmapped, so it sets the bit
on userspace ptes corresponding to unused guest pages every time they
get unmapped. KVM has no reasonable way to clear the bit once the page
is in use again.
While set_ptes() checks and clears the bit, other paths that set new
ptes did not. This led to used pages being thrown out as if they were
unused, causing guest corruption.
Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in
set_pte(), i.e. whenever a present pte is getting set. The check in
set_ptes() is then redundant and can be removed.
Also fix gmap_helper_try_set_pte_unused() to only set the bit if the
pte is present; the _PAGE_UNUSED bit is only defined for present ptes
and thus should not be set for non-present ptes.
There is a possibility that the user_operexec capability
only works if facility bit 74 is enabled. This is now fixed,
but add a selftest to demonstrate that.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260507200836.3500368-3-farman@linux.ibm.com>
Eric Farman [Thu, 7 May 2026 20:08:34 +0000 (22:08 +0200)]
KVM: s390: Fix S390_USER_OPEREXEC enablement without STFLE 74
The KVM_CAP_S390_USER_OPEREXEC capability allows operation exceptions
to be forwarded to userspace. But the actual enablement at the hardware
level occurs in kvm_arch_vcpu_postcreate(), and only if STFLE.74 or
user_instr0 are enabled. The latter is associated with a separate
capability (KVM_CAP_S390_USER_INSTR0), so the only way this happens
for the USER_OPEREXEC capability is if STFLE.74 is enabled. KVM
unconditionally enables this bit in kvm_arch_init_vm(), but the guest
could disable it from the CPU model and thus ignore this capability.
Add USER_OPEREXEC to the check in kvm_arch_vcpu_postcreate(), such that
either capability would enable this type of exception.
Fixes: 8e8678e740ec ("KVM: s390: Add capability that forwards operation exceptions") Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[Fixed patch title, as recommended by frankja@linux.ibm.com] Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260507200836.3500368-2-farman@linux.ibm.com>
John Johansen [Mon, 22 Jun 2026 23:34:13 +0000 (16:34 -0700)]
apparmor: advertise the tcp fast open fix is applied
The fix for tcp-fast-open ensures that the connect permission is being
mediated correctly but it didn't add an artifact to the feature set to
advertise the fix is available. Add an artifact so that the test suite
can identify if the fix has not been properly applied or a new
unexpected regression has occurred.
Fixes: 4d587cd8a7215 ("apparmor: mediate the implicit connect of TCP fast open sendmsg") Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Wed, 24 Jun 2026 01:36:41 +0000 (18:36 -0700)]
Merge tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New features:
- XPRTRDMA: Decouple req recycling from RPC completion
- NFS: Expose FMODE_NOWAIT for read-only files
Bugfixes:
- SUNRPC:
- Fix sunrpc sysfs error handling
- Fix uninitialized xprt_create_args structure
- XPRTRDMA:
- Harden connect and reply handling
- NFS:
- Fix EOF updates after fallocate/zero-range
- Keep PG_UPTODATE clear after read errors in page groups
- Use nfsi->rwsem to protect traversal of the file lock list
- Prevent resource leak in nfs_alloc_server()
- NFSv4:
- Clear exception state on successful mkdir retry
- Don't skip revalidate when holding a dir delegation and attrs are stale
- pNFS:
- Fix use-after-free in pnfs_update_layout()
- Defer return_range callbacks until after inode unlock
- Fix LAYOUTCOMMIT retry loop on OLD_STATEID
- Reject zero-length r_addr in nfs4_decode_mp_ds_addr
- NFS/flexfiles:
- Reject zero-length filehandle version arrays
- Fix checking if a layout is striped
- Fixes for honoring FF_FLAGS_NO_IO_THRU_MDS
Other cleanups and improvements:
- Remove the fileid field from struct nfs_inode
- Move long-delayed xprtrdma work onto the system_dfl_long_wq
- Convert xprtrdma send buffer free list to an llist
- Show "<redacted>" for cert_serial and privkey_serial mount options"
* tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (42 commits)
NFS: Use common error handling code in nfs_alloc_server()
NFS: Prevent resource leak in nfs_alloc_server()
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs: don't skip revalidate on directory delegation when attrs flagged stale
xprtrdma: Return sendctx slot after Send preparation failure
xprtrdma: Repost Receive buffers for malformed replies
xprtrdma: Sanitize the reply credit grant after parsing
xprtrdma: Fix bcall rep leak and unbounded peek
xprtrdma: Resize reply buffers before reposting receives
xprtrdma: Check frwr_wp_create() during connect
xprtrdma: Initialize re_id before removal registration
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
xprtrdma: Convert send buffer free list to llist
NFS: correct CONFIG_NFS_V4 macro name in #endif comment
nfs: use nfsi->rwsem to protect traversal of the file lock list
NFSv4.1/pNFS: fix LAYOUTCOMMIT retry loop on OLD_STATEID
nfs: expose FMODE_NOWAIT for read-only files
nfs: add nowait version of nfs_start_io_direct
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors
...
Linus Torvalds [Wed, 24 Jun 2026 00:59:36 +0000 (17:59 -0700)]
Merge tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The changes primarily focus on filesystem error reporting, reducing
memory footprint by reverting in-memory data structures used for
runtime validation, honoring FDP hints, and adding trace and debug
logs. In addition, there are critical bug fixes resolving
out-of-bounds read vulnerabilities in inline directory and ACL
handling, potential deadlocks in balance_fs, use-after-free issues in
atomic writes, and false data/node type assignments in large sections.
Enhancements:
- Revert in-memory sit version and block bitmaps
- support to report fserror
- add trace_f2fs_fault_report
- add iostat latency tracking for direct IO
- add logs in f2fs_disable_checkpoint()
- honor per-I/O write streams for direct writes
- map data writes to FDP streams
- skip inode folio lookup for cached overwrite
- skip direct I/O iostat context when disabled
- revert "check in-memory block bitmap"
- revert "check in-memory sit version bitmap"
Fixes:
- optimize representative type determination in GC
- fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
- fix potential deadlock in f2fs_balance_fs()
- fix potential deadlock in gc_merge path of f2fs_balance_fs()
- atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- fix missing read bio submission on large folio error
- pass correct iostat type for single node writes
- fix to do sanity check on f2fs_get_node_folio_ra()
- validate orphan inode entry count
- keep atomic write retry from zeroing original data
- read COW data with the original inode during atomic write
- validate inline dentry name lengths before conversion
- validate dentry name length before lookup compares it
- reject setattr size changes on large folio files
- revert "remove non-uptodate folio from the page cache in move_data_block"
- validate ACL entry sizes in f2fs_acl_from_disk()
- bound i_inline_xattr_size for non-inline-xattr inodes
- fix listxattr handling of corrupted xattr entries
- fix to round down start offset of fallocate for pin file"
* tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: fix to round down start offset of fallocate for pin file
f2fs: fix listxattr handling of corrupted xattr entries
f2fs: skip direct I/O iostat context when disabled
f2fs: remove unneeded f2fs_is_compressed_page()
f2fs: avoid unnecessary fscrypt_finalize_bounce_page()
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
f2fs: misc cleanup in f2fs_record_stop_reason()
f2fs: fix wrong description in printed log
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
f2fs: Split f2fs_write_end_io()
f2fs: Rename f2fs_post_read_wq into f2fs_wq
f2fs: Prepare for supporting delayed bio completion
f2fs: reject setattr size changes on large folio files
f2fs: validate dentry name length before lookup compares it
f2fs: validate inline dentry name lengths before conversion
f2fs: read COW data with the original inode during atomic write
f2fs: skip inode folio lookup for cached overwrite
f2fs: keep atomic write retry from zeroing original data
...
Linus Torvalds [Wed, 24 Jun 2026 00:16:31 +0000 (17:16 -0700)]
Merge tag 'x86-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent NULL dereference on theoretical missing IO bitmap (Li
RongQing)
* tag 'x86-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent NULL dereference on theoretical missing IO bitmap
Linus Torvalds [Tue, 23 Jun 2026 23:57:39 +0000 (16:57 -0700)]
Merge tag 'timers-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timer fixes from Ingo Molnar:
- Fix timekeeping locking order bug in the timekeeping init code
(Mikhail Gavrilov)
- Fix u64 multiplication bug in the posix-cpu-timers code on 32-bit
kernels (Zhan Xusheng)
- Fix macro name in comment block (Ethan Nelson-Moore)
- Fix off-by-one bug in the compat settimeofday() usecs validation code
(Wang Yan)
* tag 'timers-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix off-by-one in compat settimeofday() usec validation
hrtimer: Correct CONFIG_NO_HZ_COMMON macro name in comment
posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu()
timekeeping: Register default clocksource before taking tk_core.lock
Linus Torvalds [Tue, 23 Jun 2026 23:43:24 +0000 (16:43 -0700)]
Merge tag 'smp-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc CPU hotplug fixes from Ingo Molnar:
- Fix CPU hotplug error handling rollback bug (Bradley Morgan)
- Fix possible output OOB write bug in the sysfs hotplug states
printing code (Bradley Morgan)
* tag 'smp-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: hotplug: Bound hotplug states sysfs output
cpu: hotplug: Preserve per instance callback errors
Linus Torvalds [Tue, 23 Jun 2026 23:15:53 +0000 (16:15 -0700)]
Merge tag 'locking-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
- Fix the incorrect RCU protection in rt_spin_unlock() (Thomas
Gleixner)
* tag 'locking-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rt: Fix the incorrect RCU protection in rt_spin_unlock()
Linus Torvalds [Tue, 23 Jun 2026 23:05:54 +0000 (16:05 -0700)]
Merge tag 'core-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Fix an MM-CID race that can cause an OOB write (Rik van Riel)
- Fix a debugobjects OOM handling race (Thomas Gleixner)
* tag 'core-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Plug race against a concurrent OOM disable
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
Linus Torvalds [Tue, 23 Jun 2026 23:02:03 +0000 (16:02 -0700)]
Merge tag 'irq-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip driver fixes from Ingo Molnar:
- Fix indexing bug in the Crossbar irqchip driver (Bhargav Joshi)
- Fix a parent domain resource leak in the Crossbar irqchip driver
(Bhargav Joshi)
- Fix resource leak in the ImgTec PDC irqchip driver's exit logic
(Qingshuang Fu)
- Fix macro name in comment block (Ethan Nelson-Moore)
* tag 'irq-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Correct CONFIG_PCI_MSI_ARCH_FALLBACKS macro name in comment
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
irqchip/crossbar: Fix parent domain resource leak
irqchip/crossbar: Use correct index in crossbar_domain_free()
Linus Torvalds [Tue, 23 Jun 2026 22:51:14 +0000 (15:51 -0700)]
Merge tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
- Refactor devm_dma_request_chan() API
New Support:
- Loongson Multi-Channel DMA controller support
- Renesas RZ/{T2H,N2H} support
- Dw CV1800B DMA support
- Switchtec DMA engine driver
U pdates:
- Xilinx AXI dma binding conversion
- Renesas CHCTRL register read updates
- AMD MDB Endpoint and non-LL mode Support
- AXI dma handling of SW and HW cyclic transfers termination
- Intel ioatdma and idxd driver updates"
* tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (62 commits)
dt-bindings: dma: snps,dw-axi-dmac: Add fallback compatible for CV1800B
MAINTAINERS: dmaengine/ti: Remove myself and add Vignesh as maintainer
dmaengine: qcom: Unify user-visible "Qualcomm" name
dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
dmaengine: qcom: hidma: use sysfs_emit() in sysfs show callbacks
dmaengine: dw-axi-dmac: fix PM for system sleep and channel alloc
dmaengine: dw-axi-dmac: drop redundant DMAC enable in block start
dmaengine: altera-msgdma: Use memcpy_toio for descriptor FIFO writes
dt-bindings: dma: fsl-edma: add dma-channel-mask property description
dmaengine: tegra: Fix burst size calculation
dmaengine: iop32x-adma: Remove a leftover header file
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
dmaengine: dma-axi-dmac: Drop struct clk from main struct
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
dmaengine: Fix possible use after free
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
dmaengine: dw-edma-pcie: Reject devices without driver data
dmaengine: sh: rz-dmac: Add DMA ACK signal routing support
irqchip/renesas-rzv2h: Add DMA ACK signal routing support
dmaengine: dw-edma: Remove dw_edma_add_irq_mask()
...
Linus Torvalds [Tue, 23 Jun 2026 22:41:48 +0000 (15:41 -0700)]
Merge tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Bunch of new driver, device support in existing drivers/binding and
few updates to existing drivers
New Support:
- Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe
phy support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
- Econet EN751221 and EN7528 PCIe phy support
- NXPs TJA1145 CAN transceiver phy support
- TI DS125DF111 retimer phy support
- Rockchip RK3528 usb phy support
- TI J722S phy support
- Axiado eMMC PHY driver
- EyeQ5 Ethernet PHY driver
- Generic PHY driver for Lynx 10G SerDes
- Spacemit K3 USB2 PHY support
Updates:
- Tomi helping maintian zynqmp phys
- lynx phy updates to support 25GBASER
- Rockchip GRF for RK3568/RV1108 support
- Qualcomm QSERDES COM v2 support"
* tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (87 commits)
phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
phy: Move MODULE_DEVICE_TABLE next to the table itself
phy: add basic support for NXPs TJA1145 CAN transceiver
dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver
phy: freescale: phy-fsl-imx8qm-lvds-phy: Fix missing pm_runtime_disable() on probe error path
dt-bindings: phy: qcom,qmp-usb: Add ipq5210 USB3 PHY
dt-bindings: phy: qcom,qusb2: Document IPQ5210 compatible
phy: freescale: phy-fsl-imx8qm-lvds-phy: Use synchronous PM runtime put in reset
MAINTAINERS: expand Lynx 28G entry to cover Lynx 10G SerDes
phy: lynx-10g: new driver
dt-bindings: phy: lynx-10g: initial document
phy: lynx-28g: improve phy_validate() procedure
phy: lynx-28g: optimize read-modify-write operation
phy: lynx-28g: add support for big endian register maps
phy: lynx-28g: common probe() and remove()
phy: lynx-28g: make lynx_28g_pll_read_configuration() callable per PLL
phy: lynx-28g: move struct lynx_info definitions downwards
phy: lynx-28g: provide default lynx_lane_supports_mode() implementation
phy: lynx-28g: generalize protocol converter accessors
phy: lynx-28g: common lynx_pll_get()
...
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:23 +0000 (17:32 -0500)]
Merge branch 'pci/controller/misc'
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
* pci/controller/misc:
PCI: visconti: Drop unused include
PCI: fu740: Drop unused include
PCI: designware-plat: Drop unused include
PCI: amd-mdb: Use the right GPIO header
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:23 +0000 (17:32 -0500)]
Merge branch 'pci/controller/tlp_macros'
- Add common TLP Type macros (MRd/Wr, IORd/Wr, CfgRd/Wr 0, CfgRd/Wr 1, Msg)
and use them in aspeed, cadence, dwc, mediatek, tegra drivers (Hans
Zhang)
* pci/controller/tlp_macros:
PCI: cadence: Use common TLP type macros
PCI: dwc: Replace ATU type macros with common TLP type macros
PCI: Add common TLP type macros and convert aspeed/mediatek
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:23 +0000 (17:32 -0500)]
Merge branch 'pci/controller/rescan_lock'
- Protect root bus removal with rescan lock in altera, brcmstb, cadence,
dwc, iproc, mediatek, plda, rockchip to prevent use-after-free or crashes
when racing with sysfs rescan or hotplug (Hans Zhang)
* pci/controller/rescan_lock:
PCI: rockchip: Protect root bus removal with rescan lock
PCI: plda: Protect root bus removal with rescan lock
PCI: mediatek: Protect root bus removal with rescan lock
PCI: iproc: Protect root bus removal with rescan lock
PCI: dwc: Protect root bus removal with rescan lock
PCI: cadence: Protect root bus removal with rescan lock
PCI: brcmstb: Protect root bus removal with rescan lock
PCI: altera: Protect root bus removal with rescan lock
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:22 +0000 (17:32 -0500)]
Merge branch 'pci/controller/link_train_delay'
- Add pci_host_common_link_train_delay() for the mandatory delay after
> 5GT/s Link training completes and use it for cadence HPA, j721e, LGA;
dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
* pci/controller/link_train_delay:
PCI: rzg3s-host: Use common pci_host_common_link_train_delay() helper
PCI: mediatek-gen3: Add 100 ms delay after link up
PCI: aardvark: Add 100 ms delay after link training
PCI: dwc: Use common pci_host_common_link_train_delay() helper
PCI: cadence-hpa: Add post-link delay
PCI: cadence: Add post-link delay for LGA and j721e glue driver
PCI: Add pci_host_common_link_train_delay() helper
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:16 +0000 (17:32 -0500)]
Merge branch 'pci/controller/mediatek-gen3'
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian Yang)
- Do full device power down on removal, including asserting PERST#, when
removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Fix incorrectly skipped pwrctrl error message
PCI: mediatek-gen3: Do full device power down on removal
PCI: mediatek-gen3: Add a .shutdown() callback to control PERST# signal
PCI: mediatek-gen3: Fix PERST# control timing during system startup
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:16 +0000 (17:32 -0500)]
Merge branch 'pci/controller/mediatek'
- Use FIELD_PREP() to fix incorrect operator precedence in PCIE_FTS_NUM_L0
(Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
* pci/controller/mediatek:
dt-bindings: PCI: mediatek: Add support for EcoNet EN7528
PCI: mediatek: Use actual physical address instead of virt_to_phys()
PCI: mediatek: Fix IRQ domain leak when port fails to enable
PCI: mediatek: Fix operator precedence in PCIE_FTS_NUM_L0 macro
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:16 +0000 (17:32 -0500)]
Merge branch 'pci/controller/loongson'
- Ignore downstream devices only on internal bridges to avoid Loongson
hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect supported link
speeds (Ziyao Li)
* pci/controller/loongson:
PCI: loongson: Override PCIe bridge supported speeds for Loongson-3C6000 series
PCI: loongson: Do not ignore downstream devices on external bridges
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:14 +0000 (17:32 -0500)]
Merge branch 'pci/controller/dwc-qcom'
- Set max OPP during resume so DBI register accesses don't fail with NoC
errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether downstream
devices are already in D3hot and wakeup-enabled devices are capable of
generating PME from D3cold (Krishna Chaitanya Chundru)
- Add a .get_ltssm() callback to get the LTSSM status without DBI, since
DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to avoid
power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down using
pci_host_common_d3cold_possible() instead of checking whether ASPM L1 is
enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP votes
(Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in RP
node while PERST# is in the RC node, but warn about the DT issue (Qiang
Yu)
- Add dw_pcie_program_t_power_on() to program T_POWER_ON (Krishna Chaitanya
Chundru)
- Program qcom T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which don't use
the dw_pcie_host_init() path that initializes the lock (Yadu M G)
* pci/controller/dwc-qcom:
PCI: qcom: Initialize DWC MSI lock for firmware-managed ECAM hosts
PCI: qcom: Disable ASPM L0s for SA8775P
PCI: qcom: Program T_POWER_ON
PCI: dwc: Add dw_pcie_program_t_power_on() to program T_POWER_ON
PCI/ASPM: Add pcie_encode_t_power_on() helper to encode L1SS T_POWER_ON fields
PCI: qcom: Handle mixed PERST#/PHY DT configuration
PCI: qcom: Add D3cold support
PCI: dwc: Use common D3cold eligibility helper in suspend path
PCI: qcom: Power down PHY via PARF_PHY_CTRL before disabling rails/clocks
PCI: qcom: Add .get_ltssm() callback to query LTSSM status
PCI: host-common: Add pci_host_common_d3cold_possible() helper
PCI: qcom: Set max OPP before DBI access during resume
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:06 +0000 (17:32 -0500)]
Merge branch 'pci/controller/dwc-imx6'
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Add pci_host_common_parse_ports() for use by any native driver to parse
Root Port properties (currently only reset GPIOs) (Sherry Sun)
- Assert PERST# before enabling regulators to ensure that even if power is
enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host bridge)
to help support Key E connectors and the pwrctrl framework (Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power supplies
(Sherry Sun)
* pci/controller/dwc-imx6:
PCI: imx6: Integrate new pwrctrl API
PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
PCI: imx6: Parse 'reset-gpios' in Root Port nodes
PCI: imx6: Assert PERST# before enabling regulators
PCI: host-generic: Add common helpers for parsing Root Port properties
dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:05 +0000 (17:32 -0500)]
Merge branch 'pci/controller/dwc'
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to 5.10a,
not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in artpec6,
dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce boilerplate
and fix a seq_file memory leak by including a .release() callback (Hans
Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for controller
that lacks RAS DES capability (Shuvam Pandey)
* pci/controller/dwc:
PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
PCI: dwc: Fix signedness bug in fault injection test code
PCI: dwc: Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs
PCI: keembay: Use common mode field in struct dw_pcie
PCI: dwc: Use common mode field in struct dw_pcie
PCI: artpec6: Use common mode field in struct dw_pcie
PCI: dra7xx: Use common mode field in struct dw_pcie
PCI: dwc: Apply ECRC workaround for DesignWare cores prior to 5.10a
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:05 +0000 (17:32 -0500)]
Merge branch 'pci/controller/host-common'
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
* pci/controller/host-common:
PCI: host-common: Request bus reassignment when not probe-only
- Add endpoint embedded doorbell fallback, used if MSI allocation fails
(Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell test
(Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way through
(Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it
from hardirq context (Koichiro Den)
- Validate doorbell count when configuring NTB and vNTB doorbells
(Manivannan Sadhasivam)
- Call sleepable pci_epc_raise_irq() from a work item instead of atomic
context, e.g., when setting bits in NTB peer doorbells in the
ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Reject unusable vNTB doorbell counts, e.g., if they don't allow space for
link event 0 and historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and historically
skipped slot 1) so they don't appear as valid doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only specified
bits, use the correct vector for non-contiguous Linux IRQ numbers, and
validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors (Koichiro Den)
* pci/endpoint:
NTB: epf: Implement .db_vector_count()/mask() for doorbells
NTB: epf: Fix doorbell bitmask and IRQ vector handling
NTB: epf: Report 0-based doorbell vector via ntb_db_event()
NTB: epf: Make db_valid_mask cover only real doorbell bits
NTB: epf: Document legacy doorbell slot offset in ntb_epf_peer_db_set()
PCI: endpoint: pci-epf-vntb: Implement .db_vector_count()/mask() for doorbells
PCI: endpoint: pci-epf-vntb: Exclude reserved slots from db_valid_mask
PCI: endpoint: pci-epf-vntb: Guard configfs writes after EPC attach
PCI: endpoint: pci-epf-vntb: Reject unusable doorbell counts
PCI: endpoint: pci-epf-vntb: Report 0-based doorbell vector via ntb_db_event()
PCI: endpoint: pci-epf-vntb: Defer pci_epc_raise_irq() out of atomic context
PCI: endpoint: pci-epf-vntb: Document legacy MSI doorbell offset
PCI: endpoint: pci-epf-ntb: Add check to detect 'db_count' value of 0
PCI: endpoint: pci-epf-vntb: Add check to detect 'db_count' value of 0
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
NTB: epf: Fix request_irq() unwind in ntb_epf_init_isr()
misc: pci_endpoint_test: Remove dead BAR read before doorbell trigger
misc: pci_endpoint_test: Validate BAR index in doorbell test
PCI: endpoint: pci-ep-msi: Add embedded doorbell fallback
PCI: endpoint: pci-epf-test: Reuse pre-exposed doorbell targets
PCI: endpoint: pci-epf-vntb: Reuse pre-exposed doorbells and IRQ flags
PCI: endpoint: pci-ep-msi: Refactor doorbell allocation for new backends
PCI: dwc: ep: Expose integrated eDMA resources via EPC aux-resource API
PCI: dwc: Record integrated eDMA register window
PCI: endpoint: Add auxiliary resource query API
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:03 +0000 (17:32 -0500)]
Merge branch 'pci/sysfs'
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:02 +0000 (17:32 -0500)]
Merge branch 'pci/reset'
- Log device readiness timeouts as errors, not warnings (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot -> D0uninitialized
transition), when the device may respond with Request Retry Status if it
needs more time to initialize (Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs (Lukas Wunner)
* pci/reset:
PCI: Drop unnecessary retries when restoring BARs
PCI: Wait for device readiness after D3hot -> D0uninitialized transition
PCI: Log device readiness timeouts as errors
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:01 +0000 (17:32 -0500)]
Merge branch 'pci/pwrctrl'
- Don't try to power on/off devices unless we know they actually support
power control (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Lock device when calling device_is_bound()
PCI/pwrctrl: Do not try to power on/off devices that don't need pwrctrl
PCI/pwrctrl: Move pci_pwrctrl_is_required() earlier in file
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:01 +0000 (17:32 -0500)]
Merge branch 'pci/pm'
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
Bjorn Helgaas [Tue, 23 Jun 2026 22:32:00 +0000 (17:32 -0500)]
Merge branch 'pci/enumeration'
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked around a
WiFi device defect (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to avoid
clamping a link to 2.5GT/s after hot-plug changes the device (Maciej W.
Rozycki)
- Don't bother trying to retrain a 2.5GT/s link at 2.5GT/s since nothing
would be gained by the retrain (Maciej W. Rozycki)
* pci/enumeration:
PCI: Bail out early for 2.5GT/s devices in PCIe failed link retraining
PCI: Use pcie_get_speed_cap() in PCIe failed link retraining
PCI: Always lift 2.5GT/s restriction in PCIe failed link retraining
PCI: Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*)
Linus Torvalds [Tue, 23 Jun 2026 20:58:38 +0000 (13:58 -0700)]
Merge tag 'soundwire-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Improvements in handling of soundwire groups
- Additional checks flagged by various tools
- Intel driver updates for ghost Realtek device handling in firmware
and adding devices to wake lists
* tag 'soundwire-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: Disable ghost Realtek devices
soundwire: only handle alert events when the peripheral is attached
soundwire: intel_ace2x: release bpt_stream when close it
soundwire: intel: Move suspend tracking from trigger to pm suspend
soundwire: intel_auxdevice: Add es9356 to wake_capable_list
soundwire: use krealloc_array to prevent integer overflow
soundwire: increase group->max_size after allocation
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
soundwire: don't program SDW_SCP_BUSCLOCK_SCALE on a unattached Peripheral
soundwire: validate DT compatible before parsing it
soundwire: intel_auxdevice: Add cs42l43b to wake_capable_list
soundwire: stream: sdw_stream_remove_slave(): Check stream is valid
Randy Dunlap [Fri, 12 Jun 2026 23:44:56 +0000 (16:44 -0700)]
kdoc: xforms: ignore special static/inline macros
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c contains 7 (for
now) functions that use STATIC_IFN_KUNIT or INLINE_IFN_KUNIT macros for
function qualifiers (static or not, inline or not).
These cause parse warnings from kernel-doc:
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 29]
STATIC_IFN_KUNIT const struct drm_color_lut * __extract_blob_lut (const
struct drm_property_blob *blob, uint32_t *size)
Handle these in kernel-doc to prevent multiple warnings.
Fixes: 647d1fd04652 ("drm/amd/display: Add KUnit test for color helpers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260612234458.1084156-1-rdunlap@infradead.org>
projects / linux.git / log