| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit fa26d0c778b432d3d9814ea82552e813b33eeb5c upstream.
Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in
acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying
wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead()
into acpi_idle_play_dead(). The problem is that these functions are not
exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails.
The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0()
(the later from assembly) but it seems putting the whole pattern into a
new function and exporting it instead is better.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()")
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8cdddd182bd7befae6af49c5fd612893f55d6ccb upstream.
Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms
with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g.
I'm observing the following on AWS Nitro (e.g r5b.xlarge but other
instance types are affected as well):
# echo 0 > /sys/devices/system/cpu/cpu0/online
# echo 1 > /sys/devices/system/cpu/cpu0/online
<10 seconds delay>
-bash: echo: write error: Input/output error
In fact, the above mentioned commit only revealed the problem and did
not introduce it. On x86, to wakeup CPU an NMI is being used and
hlt_play_dead()/mwait_play_dead() loops are prepared to handle it:
/*
* If NMI wants to wake up CPU0, start CPU0.
*/
if (wakeup_cpu0())
start_cpu0();
cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on
systems where it wasn't called before the above mentioned commit) serves
the same purpose but it doesn't have a path for CPU0. What happens now on
wakeup is:
- NMI is sent to CPU0
- wakeup_cpu0_nmi() works as expected
- we get back to while (1) loop in acpi_idle_play_dead()
- safe_halt() puts CPU0 to sleep again.
The straightforward/minimal fix is add the special handling for CPU0 on x86
and that's what the patch is doing.
Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream.
The following problem has been reported by George Kennedy:
Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb50aaf960e3bedfef79063411ffd670da94b84b ]
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1013ff7a5472db637c56bb6237f8343398c03a7 ]
The upfront allocation of new_bus_id is done to avoid allocating
memory under acpi_device_lock, but it doesn't really help,
because (1) it leads to many unnecessary memory allocations for
_ADR devices, (2) kstrdup_const() is run under that lock anyway and
(3) it complicates the code.
Rearrange acpi_device_add() to allocate memory for a new struct
acpi_device_bus_id instance only when necessary, eliminate a redundant
local variable from it and reduce the number of labels in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 25928deeb1e4e2cdae1dccff349320c6841eb5f8 upstream.
ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329
ACPI is allocating an object using kmalloc(), but then frees it
using kmem_cache_free(<"Acpi-Namespace" kmem_cache>).
This is wrong and can lead to boot failures manifesting like this:
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
clocksource: Switched to clocksource tsc-early
BUG: unable to handle page fault for address: 000000003ffe0018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b
20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b
1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20
RSP: 0000:ffffc90000013df8 EFLAGS: 00010206
RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002
RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300
RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001
R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000
R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80
FS: 0000000000000000(0000) GS:ffff88803ec00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__trace_define_field+0x33/0xa0
event_trace_init+0xeb/0x2b4
tracer_init_tracefs+0x60/0x195
? register_tracer+0x1e7/0x1e7
do_one_initcall+0x74/0x160
kernel_init_freeable+0x190/0x1f0
? rest_init+0x9a/0x9a
kernel_init+0x5/0xf6
ret_from_fork+0x35/0x40
CR2: 000000003ffe0018
---[ end trace 707efa023f2ee960 ]---
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Bisection leads to unrelated changes in slab; Vlastimil Babka
suggests an unrelated layout or slab merge change merely exposed
the underlying bug.
Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/
Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com
Link: https://github.com/acpica/acpica/commit/29da9a2a
Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Diagnosed-by: Vlastimil Babka <vbabka@suse.cz>
Diagnosed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c1d1e25a8c542816ae8dee41b81a18d30c7519a0 upstream.
The .callback of the quirk for Sony VPCEH3U1E was unintetionally
removed by the commit 25417185e9b5 ("ACPI: video: Add DMI quirk
for GIGABYTE GB-BXBT-2807"). Add it back to make sure the quirk
for Sony VPCEH3U1E works as expected.
Fixes: 25417185e9b5 ("ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 25417185e9b5ff90746d50769d2a3fcd1629e254 ]
The GIGABYTE GB-BXBT-2807 is a mini-PC which uses off the shelf
components, like an Intel GPU which is meant for mobile systems.
As such, it, by default, has a backlight controller exposed.
Unfortunately, the backlight controller only confuses userspace, which
sees the existence of a backlight device node and has the unrealistic
belief that there is actually a backlight there!
Add a DMI quirk to force the backlight off on this system.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
handling
commit c27f3d011b08540e68233cf56274fdc34bebb9b5 upstream.
ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61
The handling of the generic_serial_bus (I2C) and GPIO op_regions in
acpi_ev_address_space_dispatch() passes a number of extra parameters
to the address-space handler through the address-space Context pointer
(instead of using more function parameters).
The Context is shared between threads, so if multiple threads try to
call the handler for the same address-space at the same time, then
a second thread could change the parameters of a first thread while
the handler is running for the first thread.
An example of this race hitting is the Lenovo Yoga Tablet2 1015L,
where there are both attrib_bytes accesses and attrib_byte accesses
to the same address-space. The attrib_bytes access stores the number
of bytes to transfer in Context->access_length. Where as for the
attrib_byte access the number of bytes to transfer is always 1 and
field_obj->Field.access_length is unused (so 0). Both types of
accesses racing from different threads leads to the following problem:
1. Thread a. starts an attrib_bytes access, stores a non 0 value
from field_obj->Field.access_length in Context->access_length
2. Thread b. starts an attrib_byte access, stores 0 in
Context->access_length
3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which
sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE
and calls acpi_gsb_i2c_read_bytes(..., Context->access_length)
4. At this point Context->access_length is 0 (set by thread b.)
rather then the field_obj->Field.access_length value from thread a.
This 0 length reads leads to the following errors being logged:
i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read)
i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95
Note this is just an example of the problems which this race can cause.
There are likely many more (sporadic) problems caused by this race.
This commit adds a new context_mutex to struct acpi_object_addr_handler
and makes acpi_ev_address_space_dispatch() take that mutex when
using the shared Context to pass extra parameters to an address-space
handler, fixing this race.
Note the new mutex must be taken *after* exiting the interpreter,
therefor the existing acpi_ex_exit_interpreter() call is moved to above
the code which stores the extra parameters in the Context.
Link: https://github.com/acpica/acpica/commit/c9e01169
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b8652936f0ca9ca2e6c984ae76c7bfcda1b3f22 upstream
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.
This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.
So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.
[nsaenz: unified implementation with DT's counterpart]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67e40054de86aae520ddc2a072d7f6951812a14f upstream.
A list_add corruption is reported by Hulk Robot like this:
==============
list_add corruption.
Call Trace:
link_obj+0xc0/0x1c0
link_group+0x21/0x140
configfs_register_subsystem+0xdb/0x380
acpi_configfs_init+0x25/0x1000 [acpi_configfs]
do_one_initcall+0x149/0x820
do_init_module+0x1ef/0x720
load_module+0x35c8/0x4380
__do_sys_finit_module+0x10d/0x1a0
do_syscall_64+0x34/0x80
It's because of the missing check after configfs_register_default_group,
where configfs_unregister_subsystem should be called once failure.
Fixes: 612bd01fc6e0 ("ACPI: add support for loading SSDTs via configfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1e6bd2995ac0e1ad0c2a2d906a06f59ce2ed293 upstream.
Property matching does not work for ACPI fwnodes if the value of the
given property is not represented as a package in the _DSD package
containing it. For example, the "compatible" property in the _DSD
below
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", "ethernet-phy-ieee802.3-c45"}
}
})
will not be found by fwnode_property_match_string(), because the ACPI
code handling device properties does not regard the single value as a
"list" in that case.
Namely, fwnode_property_match_string() invoked to match a given
string property value first calls fwnode_property_read_string_array()
with the last two arguments equal to NULL and 0, respectively, in
order to count the items in the value of the given property, with the
assumption that this value may be an array. For ACPI fwnodes, that
operation is carried out by acpi_node_prop_read() which calls
acpi_data_prop_read() for this purpose. However, when the return
(val) pointer is NULL, that function only looks for a property whose
value is a package without checking the single-value case at all.
To fix that, make acpi_data_prop_read() check the single-value
case if its return pointer argument is NULL and modify
acpi_data_prop_read_single() handling that case to attempt to
read the value of the property if the return pointer is NULL
and return 1 if that succeeds.
Fixes: 3708184afc77 ("device property: Move FW type specific functionality to FW specific files")
Reported-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a1df829ead5877d4a1061e976a50e2e665a16f24 ]
Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.
iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.
Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.
Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 81b704d3e4674e09781d331df73d76675d5ad8cb upstream.
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782e4
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36af2d5c4433fb40ee2af912c4ac0a30991aecfc upstream.
Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78a18fec5258c8df9435399a1ea022d73d3eceb9 upstream.
Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.
We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.
[ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan:
Defer enumeration of devices with _DEP lists") which caused it to
be much more likely to occur on some systems, but the real defect
had been introduced by an earlier commit. ]
Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a58015d638cd4e4555297b04bec9b49028369075 upstream.
Linux VM on Hyper-V crashes with the latest mainline:
[ 4.069624] detected buffer overflow in strcpy
[ 4.077733] kernel BUG at lib/string.c:1149!
..
[ 4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[ 4.085819] Call Trace:
[ 4.085819] acpi_device_add.cold.15+0xf2/0xfb
[ 4.085819] acpi_add_single_object+0x2a6/0x690
[ 4.085819] acpi_bus_check_add+0xc6/0x280
[ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa
[ 4.085819] acpi_walk_namespace+0x9a/0xc2
[ 4.085819] acpi_bus_scan+0x78/0x90
[ 4.085819] acpi_scan_init+0xfa/0x248
[ 4.085819] acpi_init+0x2c1/0x321
[ 4.085819] do_one_initcall+0x44/0x1d0
[ 4.085819] kernel_init_freeable+0x1ab/0x1f4
This is because of the recent buffer overflow detection in the
commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in
fortified string functions")
Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".
Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.
The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI
devices")
Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b08221c40febcbda9309dd70c61cf1b0ebb0e351 upstream.
Recently we met a touchscreen problem on some Thinkpad machines, the
touchscreen driver (i2c-hid) is not loaded and the touchscreen can't
work.
An i2c ACPI device with the name WACF2200 is defined in the BIOS, with
the current rule in matching_id(), this device will be regarded as
a PNP device since there is WACFXXX in the acpi_pnp_device_ids[] and
this PNP device is attached to the acpi device as the 1st
physical_node, this will make the i2c bus match fail when i2c bus
calls acpi_companion_match() to match the acpi_id_table in the i2c-hid
driver.
WACF2200 is an i2c device instead of a PNP device, after adding the
string length comparing, the matching_id() will return false when
matching WACF2200 and WACFXXX, and it is reasonable to compare the
string length when matching two IDs.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12fc4dad94dfac25599f31257aac181c691ca96f upstream.
This reverts commit 8a66790b7850a6669129af078768a1d42076a0ef.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically converting it to AE_OK), referring to that
value as "an OK termination by the user function". This means that
acpi_dev_get_resources() does not abort processing when the preproc
function returns a negative value.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7482c5cb90e5a7f9e9e12dd154d405e0219656e3 upstream.
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c1496 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a7e3d7f056831a6193d6d737fb7a26dfdceb04b upstream.
Dan reports that smatch thinks userspace can craft an out-of-bound bus
family number. However, nd_cmd_clear_to_send() blocks all non-zero
values of bus-family since only the kernel can initiate these commands.
However, in the speculation path, family is a user controlled array
index value so mask it for speculation safety. Also, since the
nd_cmd_clear_to_send() safety is non-obvious and possibly may change in
the future include input validation as if userspace could get past the
nd_cmd_clear_to_send() gatekeeper.
Link: http://lore.kernel.org/r/20201111113000.GA1237157@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6450ddbd5d8e ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
|
|
Fix following warnings caused by mismatch between
function parameters and function comments.
drivers/acpi/arm64/iort.c:55: warning: Function parameter or member 'iort_node' not described in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:55: warning: Excess function parameter 'node' description in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'id' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'bus_token' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Excess function parameter 'req_id' description in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:1142: warning: Function parameter or member 'dma_size' not described in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1142: warning: Excess function parameter 'size' description in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1534: warning: Function parameter or member 'ops' not described in 'iort_add_platform_device'
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20201014093139.1580-1-shiju.jose@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* acpi-fan:
ACPI: fan: Initialize performance state sysfs attribute
|
|
From commit 6915564dc5a8 ("ACPI: OSL: Change the type of
acpi_os_map_generic_address() return value"),
acpi_os_map_generic_address() will return logical address or NULL
for error, but for ACPI_ADR_SPACE_SYSTEM_IO case, it should be also
return 0 as it's a normal case, but now it will return -ENXIO.
So check it out for such case to avoid einj module initialization
fail.
Fixes: 6915564dc5a8 ("ACPI: OSL: Change the type of acpi_os_map_generic_address() return value")
Cc: <stable@vger.kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The following warning is reported if lock debugging is enabled.
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:4617 lockdep_init_map_waits+0x141/0x222
...
Call Trace:
__kernfs_create_file+0x7a/0xd8
sysfs_add_file_mode_ns+0x135/0x189
sysfs_create_file_ns+0x70/0xa0
acpi_fan_probe+0x547/0x621
platform_drv_probe+0x67/0x8b
...
Dynamically allocated sysfs attributes need to be initialized to avoid
the warning.
Fixes: d19e470b6605 ("ACPI: fan: Expose fan performance state information")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-scan:
ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name
* acpi-misc:
ACPI: GED: fix -Wformat
ACPI: Fix whitespace inconsistencies
* acpi-button:
ACPI: button: Add DMI quirk for Medion Akoya E2228T
* acpi-dptf:
ACPI: DPTF: Support Alder Lake
|
|
Add Alder Lake ACPI IDs for DPTF devices.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.
While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. It turns out that gsi is an
int. Fixes:
drivers/acpi/evged.c:105:48: warning: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Wformat]
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
^~~
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Fixes: ea6f3af4c5e6 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replaces spaces with tabs where spaces have been (inconsistently) used
for indentation and removes trailing whitespaces.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For some reason building with W=1 doesn't pick up on this, but the
kerneldoc name for acpi_dma_configure_id() is not right, so fix it up.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-button:
ACPI: button: Drop no longer necessary Acer SW5-012 lid_init_state quirk
* acpi-dock:
ACPI: dock: fix enum-conversion warning
|
|
Commit 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which
modify the irqflags") adds a workaround for DSDTs with a _LID method
which play tricks with the irqflags, assuming that the OS is using
an irq-type of IRQ_TYPE_LEVEL_LOW.
Now that this workaround is in place, we no longer need to disable the
lid functionality on the Acer SW5-012.
Fixes: 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Initial value of rc is '-ENXIO', and we should
use the initial value to check it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
gcc points out a type mismatch:
drivers/acpi/dock.c: In function 'hot_remove_dock_devices':
drivers/acpi/dock.c:234:53: warning: implicit conversion from 'enum <anonymous>' to 'enum dock_callback_type' [-Wenum-conversion]
234 | dock_hotplug_event(dd, ACPI_NOTIFY_EJECT_REQUEST, false);
This is harmless because 'false' still has the correct numeric value,
but passing DOCK_CALL_HANDLER documents better what is going on
and avoids the warning.
Fixes: 37f908778f20 ("ACPI / dock: Walk list in reverse order during removal of devices")
Fixes: f09ce741a03a ("ACPI / dock / PCI: Drop ACPI dock notifier chain")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These include an ACPICA code build fix related to recent GPE register
access changes, a Kconfig cleanup related to the Dynamic Platform and
Thremal Framework (DPTF) support, a reboot issue workaround, a debug
module fix and a couple of janitorial changes.
Specifics:
- Fix ACPICA code build after recent changes related to accessing GPE
registers (Rafael Wysocki).
- Clean up DPTF part of the ACPI Kconfig (Rafael Wysocki).
- Work around a reboot issue related to RESET_REG (Zhang Rui).
- Prevent ACPI debug module from attemtping to run (and crashing)
when ACPI is disabled (Jamie Iles).
- Drop confusing comment from the ACPI processor driver (Alex Hung).
- Drop a few unreachable break statements (Tom Rix)"
* tag 'acpi-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: utils: remove unreachable breaks
ACPICA: Add missing type casts in GPE register access code
ACPI: DPTF: Add ACPI_DPTF Kconfig menu
ACPI: DPTF: Fix participant driver names
ACPI: processor: remove comment regarding string _UID support
ACPI: reboot: Avoid racing after writing to ACPI RESET_REG
ACPI: debug: don't allow debugging when ACPI is disabled
|
|
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
|
|
and 'acpi-utils'
* acpi-debug:
ACPI: debug: don't allow debugging when ACPI is disabled
* acpi-reboot:
ACPI: reboot: Avoid racing after writing to ACPI RESET_REG
* acpi-processor:
ACPI: processor: remove comment regarding string _UID support
* acpi-dptf:
ACPI: DPTF: Add ACPI_DPTF Kconfig menu
ACPI: DPTF: Fix participant driver names
* acpi-utils:
ACPI: utils: remove unreachable breaks
|
|
git://git.kerne |
