| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
cacheinfo and arch_topology updates for v6.4
The cache information can be extracted from either a Device Tree(DT),
the PPTT ACPI table, or arch registers (clidr_el1 for arm64).
When the DT is used but no cache properties are advertised, the current
code doesn't correctly fallback to using arch information. The changes
fixes the same and also assuse the that L1 data/instruction caches
are private and L2/higher caches are shared when the cache information
is missing in DT/ACPI and is derived form clidr_el1/arch registers.
Currently the cacheinfo is built from the primary CPU prior to secondary
CPUs boot, if the DT/ACPI description contains cache information.
However, if not present, it still reverts to the old behavior, which
allocates the cacheinfo memory on each secondary CPUs which causes
RT kernels to triggers a "BUG: sleeping function called from invalid
context".
The changes here attempts to enable automatic detection for RT kernels
when no DT/ACPI cache information is available, by pre-allocating
cacheinfo memory on the primary CPU.
* tag 'cacheinfo-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
|
|
The cache information can be extracted from either a Device
Tree (DT), the PPTT ACPI table, or arch registers (clidr_el1
for arm64).
The clidr_el1 register is used only if DT/ACPI information is not
available. It does not states how caches are shared among CPUs.
Add a use_arch_cache_info field/function to identify when the
DT/ACPI doesn't provide cache information. Use this information
to assume L1 caches are privates and L2 and higher are shared among
all CPUs.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230414081453.244787-5-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
If a Device Tree (DT) is used, the presence of cache properties is
assumed. Not finding any is not considered. For arm64 platforms,
cache information can be fetched from the clidr_el1 register.
Checking whether cache information is available in the DT
allows to switch to using clidr_el1.
init_of_cache_level()
\-of_count_cache_leaves()
will assume there a 2 cache leaves (L1 data/instruction caches), which
can be different from clidr_el1 information.
cache_setup_of_node() tries to read cache properties in the DT.
If there are none, this is considered a success. Knowing no
information was available would allow to switch to using clidr_el1.
Fixes: de0df442ee49 ("cacheinfo: Check 'cache-unified' property to count cache leaves")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/all/20230404-hatred-swimmer-6fecdf33b57a@spud/
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-3-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
If there is no ACPI/DT information, it is assumed that L1 caches
are private and L2 (and higher) caches are shared. A cache is
'shared' between two CPUs if it is accessible from these two
CPUs.
Each CPU owns a representation (i.e. has a dedicated cacheinfo struct)
of the caches it has access to. cache_leaves_are_shared() tries to
identify whether two representations are designating the same actual
cache.
In cache_leaves_are_shared(), if 'this_leaf' is a L2 cache (or higher)
and 'sib_leaf' is a L1 cache, the caches are detected as shared as
only this_leaf's cache level is checked.
This is leads to setting sib_leaf as being shared with another CPU,
which is incorrect as this is a L1 cache.
Check 'sib_leaf->level'. Also update the comment as the function is
called when populating 'shared_cpu_map'.
Fixes: f16d1becf96f ("cacheinfo: Use cache identifiers to check if the caches are shared if available")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Update the
includes to use of.h instead of of_device.h.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-10-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch gives architecture specific code the ability to initialize
the cache level and allocate cacheinfo memory early, when cache level
initialization runs on the primary CPU for all possible CPUs.
This is part of a patch series that attempts to further the work in
commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU").
Previously, in the absence of any DT/ACPI cache info, architecture
specific cache detection and info allocation for secondary CPUs would
happen in non-preemptible context during early CPU initialization and
trigger a "BUG: sleeping function called from invalid context" splat on
an RT kernel.
More specifically, this patch adds the early_cache_level() function,
which is called by fetch_cache_info() as a fallback when the number of
cache leaves cannot be extracted from DT/ACPI. In the default generic
(weak) implementation, this new function returns -ENOENT, which
preserves the original behavior for architectures that do not implement
the function.
Since early detection can get the number of cache leaves wrong in some
cases*, additional logic is added to still call init_cache_level() later
on the secondary CPU, therefore giving the architecture specific code an
opportunity to go back and fix the initial guess. Again, the original
behavior is preserved for architectures that do not implement the new
function.
* For example, on arm64, CLIDR_EL1 detection works only when it runs on
the current CPU. In other words, a CPU cannot detect the cache depth
for any other CPU than itself.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-2-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
After entering 6.3-rc1 the LLC cacheinfo is not exported on our ACPI
based arm64 server. This is because the LLC cacheinfo is partly reset
when secondary CPUs boot up. On arm64 the primary cpu will allocate
and setup cacheinfo:
init_cpu_topology()
for_each_possible_cpu()
fetch_cache_info() // Allocate cacheinfo and init levels
detect_cache_attributes()
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // not valid, setup LLC
cache_setup_properties() // setup LLC
On secondary CPU boot up:
detect_cache_attributes()
populate_cache_leaves()
get_cache_type() // Get cache type from clidr_el1,
// for LLC type=CACHE_TYPE_NOCACHE
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // Valid and won't go to this branch,
// leave LLC's type=CACHE_TYPE_NOCACHE
The last_level_cache_is_valid() use cacheinfo->{attributes, fw_token} to
test it's valid or not, but populate_cache_leaves() will only reset
LLC's type, so we won't try to re-setup LLC's type and leave it
CACHE_TYPE_NOCACHE and won't export it through sysfs.
This patch tries to fix this by not re-populating the cache leaves if
the LLC is valid.
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230328114915.33340-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set potentially uninitialized variables to 0. This is particularly
relevant when CONFIG_ACPI_PPTT is not set.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301052307.JYt1GWaJ-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/Y86iruJPuwNN7rZw@kili/
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230124154053.355376-2-pierre.gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The cacheinfo sets up the shared_cpu_map by checking whether the caches
with the same index are shared between CPUs. However, this will trigger
slab-out-of-bounds access if the CPUs do not have the same cache hierarchy.
Another problem is the mismatched shared_cpu_map when the shared cache does
not have the same index between CPUs.
CPU0 I D L3
index 0 1 2 x
^ ^ ^ ^
index 0 1 2 3
CPU1 I D L2 L3
This patch checks each cache is shared with all caches on other CPUs.
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Link: https://lore.kernel.org/r/20230117105133.4445-2-yongxuan.wang@sifive.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
commit 3fcbf1c77d08 ("arch_topology: Fix cache attributes detection
in the CPU hotplug path")
adds a call to detect_cache_attributes() to populate the cacheinfo
before updating the siblings mask. detect_cache_attributes() allocates
memory and can take the PPTT mutex (on ACPI platforms). On PREEMPT_RT
kernels, on secondary CPUs, this triggers a:
'BUG: sleeping function called from invalid context' [1]
as the code is executed with preemption and interrupts disabled.
The primary CPU was previously storing the cache information using
the now removed (struct cpu_topology).llc_id:
commit 5b8dc787ce4a ("arch_topology: Drop LLC identifier stash from
the CPU topology")
allocate_cache_info() tries to build the cacheinfo from the primary
CPU prior secondary CPUs boot, if the DT/ACPI description
contains cache information.
If allocate_cache_info() fails, then fallback to the current state
for the cacheinfo allocation. [1] will be triggered in such case.
When unplugging a CPU, the cacheinfo memory cannot be freed. If it
was, then the memory would be allocated early by the re-plugged
CPU and would trigger [1].
Note that populate_cache_leaves() might be called multiple times
due to populate_leaves being moved up. This is required since
detect_cache_attributes() might be called with per_cpu_cacheinfo(cpu)
being allocated but not populated.
[1]:
| BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
| in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/111
| preempt_count: 1, expected: 0
| RCU nest depth: 1, expected: 1
| 3 locks held by swapper/111/0:
| #0: (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x218/0x12c8
| #1: (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x48/0xf0
| #2: (&zone->lock){+.+.}-{3:3}, at: rmqueue_bulk+0x64/0xa80
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x5dc/0x1ab8
| softirqs last enabled at (0): copy_process+0x5dc/0x1ab8
| softirqs last disabled at (0): 0x0
| Preemption disabled at:
| migrate_enable+0x30/0x130
| CPU: 111 PID: 0 Comm: swapper/111 Tainted: G W 6.0.0-rc4-rt6-[...]
| Call trace:
| __kmalloc+0xbc/0x1e8
| detect_cache_attributes+0x2d4/0x5f0
| update_siblings_masks+0x30/0x368
| store_cpu_topology+0x78/0xb8
| secondary_start_kernel+0xd0/0x198
| __secondary_switched+0xb0/0xb4
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-7-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The DeviceTree Specification v0.3 specifies that the cache node
'[d-|i-|]cache-size' property is required. The 'cache-unified'
property is specifies whether the cache level is separate
or unified.
If the cache-size property is missing, no cache leaves is accounted.
This can lead to a 'BUG: KASAN: slab-out-of-bounds' [1] bug.
Check 'cache-unified' property and always account for at least
one cache leaf when parsing the device tree.
[1] https://lore.kernel.org/all/0f19cb3f-d6cf-4032-66d2-dedc9d09a0e3@linaro.org/
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230104183033.755668-4-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make init_of_cache_level() return an error code when the cache
information parsing fails to help detecting missing information.
init_of_cache_level() is only called for riscv. Returning an error
code instead of 0 will prevent detect_cache_attributes() to allocate
memory if an incomplete DT is parsed.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-3-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
RISC-V's implementation of init_of_cache_level() is following
the Devicetree Specification v0.3 regarding caches, cf.:
- s3.7.3 'Internal (L1) Cache Properties'
- s3.8 'Multi-level and Shared Cache Nodes'
Allow reusing the implementation by moving it.
Also make 'levels', 'leaves' and 'level' unsigned int.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
fw_token is used for DT/ACPI systems to identify CPUs sharing caches.
For DT based systems, fw_token is set to a pointer to a DT node.
commit 3da72e18371c ("cacheinfo: Decrement refcount in
cache_setup_of_node()")
doesn't increment the refcount of fw_token anymore in
cache_setup_of_node(). fw_token is indeed used as a token and not
as a (struct device_node*), so no reference to fw_token should be
kept.
However, [1] is triggered when hotplugging a CPU multiple times
since cache_shared_cpu_map_remove() decrements the refcount to
fw_token at each CPU unplugging, eventually reaching 0.
Remove of_node_put() for fw_token in cache_shared_cpu_map_remove().
[1]
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 4 PID: 32 at lib/refcount.c:22 refcount_warn_saturate (lib/refcount.c:22 (discriminator 3))
Modules linked in:
CPU: 4 PID: 32 Comm: cpuhp/4 Tainted: G W 6.1.0-rc1-14091-g9fdf2ca7b9c8 #76
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Oct 31 2022
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : refcount_warn_saturate (lib/refcount.c:22 (discriminator 3))
lr : refcount_warn_saturate (lib/refcount.c:22 (discriminator 3))
[...]
Call trace:
[...]
of_node_release (drivers/of/dynamic.c:335)
kobject_put (lib/kobject.c:677 lib/kobject.c:704 ./include/linux/kref.h:65 lib/kobject.c:721)
of_node_put (drivers/of/dynamic.c:49)
free_cache_attributes.part.0 (drivers/base/cacheinfo.c:712)
cacheinfo_cpu_pre_down (drivers/base/cacheinfo.c:718)
cpuhp_invoke_callback (kernel/cpu.c:247 (discriminator 4))
cpuhp_thread_fun (kernel/cpu.c:785)
smpboot_thread_fn (kernel/smpboot.c:164 (discriminator 3))
kthread (kernel/kthread.c:376)
ret_from_fork (arch/arm64/kernel/entry.S:861)
---[ end trace 0000000000000000 ]---
Fixes: 3da72e18371c ("cacheinfo: Decrement refcount in cache_setup_of_node()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20221116094958.2141072-1-pierre.gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refcounts to DT nodes are only incremented in the function
and never decremented. Decrease the refcounts when necessary.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221026185954.991547-1-pierre.gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On couple of architectures like RISC-V and ARM64, we need to detect
cache attribues quite early during the boot when the secondary CPUs
start. So we will call detect_cache_attributes in the atomic context
and since use of normal allocation can sleep, we will end up getting
"sleeping in the atomic context" bug splat.
In order avoid that, move the allocation to use atomic version in
preparation to move the actual detection of cache attributes in the
CPU hotplug path which is atomic.
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-1-43d696288e84@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The checks to skip the CPU itself or no cacheinfo case are implemented
bit differently though the effect is exactly same. Just align the
implementation in both cache_shared_cpu_map_{setup,remove} just for
improved readability. No functional change.
Link: https://lore.kernel.org/r/20220704101605.1318280-9-sudeep.holla@arm.com
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The cache identifiers is an optional property on most of the platforms.
The presence of one must be indicated by the CACHE_ID valid bit in the
attributes.
We can use the cache identifiers provided by the firmware to check if
any two cpus share the same cache instead of relying on the fw_token
generated and set in the OS.
Link: https://lore.kernel.org/r/20220704101605.1318280-8-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Some architecture/platforms may need to setup cache properties very
early in the boot along with other cpu topologies so that all these
information can be used to build sched_domains which is used by the
scheduler.
Allow detect_cache_attributes to be called quite early during the boot.
Link: https://lore.kernel.org/r/20220704101605.1318280-7-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
It is useful to have helper to check if the given two CPUs share last
level cache. We can do that check by comparing fw_token or by comparing
the cache ID. Currently we check just for fw_token as the cache ID is
optional.
This helper can be used to build the llc_sibling during arch specific
topology parsing and feeding information to the sched_domains. This also
helps to get rid of llc_id in the CPU topology as it is sort of duplicate
information.
Also add helper to check if the llc information in cacheinfo is valid
or not.
Link: https://lore.kernel.org/r/20220704101605.1318280-6-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
cache_leaves_are_shared is already used even with ACPI and PPTT. It
checks if the cache leaves are the shared based on fw_token pointer.
However it is defined conditionally only if CONFIG_OF is enabled which
is wrong.
Move the function cache_leaves_are_shared out of CONFIG_OF and keep it
generic. It also handles the case where both OF and ACPI is not defined.
Link: https://lore.kernel.org/r/20220704101605.1318280-5-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The cacheinfo for a given CPU at a given index is used at quite a few
places by fetching the base point for index 0 using the helper
per_cpu_cacheinfo(cpu) and offsetting it by the required index.
Instead, add another helper to fetch the required pointer directly and
use it to simplify and improve readability.
Link: https://lore.kernel.org/r/20220704101605.1318280-4-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The of_cpu_device_node_get takes care of fetching the CPU'd device node
either from cached cpu_dev->of_node if cpu_dev is initialised or uses
of_get_cpu_node to parse and fetch node if cpu_dev isn't available yet.
Just use of_cpu_device_node_get instead of getting the cpu device first
and then using cpu_dev->of_node for two reasons:
1. There is no other use of cpu_dev and can be simplified
2. It enabled the use detect_cache_attributes and hence cache_setup_of_node
much earlier before the CPUs are registered as devices.
Link: https://lore.kernel.org/r/20220704101605.1318280-3-sudeep.holla@arm.com
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
On ARM64, when PPTT(Processor Properties Topology Table) is not
implemented in ACPI boot, we will goto 'free_ci' with the following
print:
Unable to detect cache hierarchy for CPU 0
But some other codes may still use 'num_leaves' to iterate through the
'info_list', such as get_cpu_cacheinfo_id(). If 'info_list' is NULL , it
would crash. So clear 'num_leaves' in free_cache_attributes().
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/1626226375-58730-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not indirect the bitmap printing of these shared_cpu show functions by
using cpumap_print_to_pagebuf/bitmap_print_to_pagebuf.
Use the more typical style with the vsnprintf %*pb and %*pbl extensions
directly so there is no possible mixup about the use of offset_in_page(buf)
by bitmap_print_to_pagebuf.
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/80457b467ab6cde13a173cfd8a4f49cd8467a7fd.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change additional instances that could use sysfs_emit and sysfs_emit_at
that the coccinelle script could not convert.
o macros creating show functions with ## concatenation
o unbound sprintf uses with buf+len for start of output to sysfs_emit_at
o returns with ?: tests and sprintf to sysfs_emit
o sysfs output with struct class * not struct device * arguments
Miscellanea:
o remove unnecessary initializations around these changes
o consistently use int len for return length of show functions
o use octal permissions and not S_<FOO>
o rename a few show function names so DEVICE_ATTR_<FOO> can be used
o use DEVICE_ATTR_ADMIN_RO where appropriate
o consistently use const char *output for strings
o checkpatch/style neatening
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
strcat is no longer necessary for sysfs_emit and sysfs_emit_at uses.
Convert the strcat uses to sysfs_emit calls and neaten other block
uses of direct returns to use an intermediate const char *.
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/5d606519698ce4c8f1203a2b35797d8254c6050a.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the various sprintf fmaily calls in sysfs device show functions
to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety.
Done with:
$ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 .
And cocci script:
$ cat sysfs_emit_dev.cocci
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- strcpy(buf, chr);
+ sysfs_emit(buf, chr);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
- len += scnprintf(buf + len, PAGE_SIZE - len,
+ len += sysfs_emit_at(buf, len,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
...
- strcpy(buf, chr);
- return strlen(buf);
+ return sysfs_emit(buf, chr);
}
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.
resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.
Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.
Fixes: 2264d9c74dda1 ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: <stable@vger.kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add coherency_max_size variable to record the maximum cache line size
for different cache levels. If it is available, we will synchronize
it as cache line size, otherwise we will use CTR_EL0.CWG reporting
in cache_line_size() for arm64.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 448a5a552f336bd7b847b1951 ("drivers: base: cacheinfo: use OF
property_read_u32 instead of get_property,read_number") makes cache
size and number_of_sets be 0 if DT doesn't provide there values. I
think this is unreasonable so make them keep the old values, which is
the same as old kernels.
Fixes: 448a5a552f33 ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a cache has an unknown type because neither the hardware nor the
firmware told us, an entry in the sysfs tree will be made, but the type
file will not be present. lscpu depends on the type file being present
for every entry, and will error out without printing system information
if lscpu cannot open the type file.
Presenting information about a cache without indicating its type is not
useful, therefore if we hit a cache with an unknown type, stop populating
sysfs so that userspace has the maximum amount of useful information.
This addresses the following lscpu error, which prevents any output.
lscpu: cannot open /sys/devices/system/cpu/cpu0/cache/index3/type: No such
file or directory
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
get_property,read_number
of_property_read_u32 searches for a property in a device node and read
a 32-bit value from it. Instead of using of_get_property to get the
property and then read 32-bit value using of_read_number, we can
simplify it by using of_property_read_u32.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call ACPI cache parsing routines from base cacheinfo code if ACPI
is enabled. Also stub out cache_setup_acpi and acpi_find_last_cache_level
so that individual architectures can enable ACPI topology parsing.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rename and change the type of of_node to indicate
it is a generic pointer which is generally only used
for comparison purposes. In a later patch we will put
an ACPI/PPTT token pointer in fw_token so that
the code which builds the shared cpu masks can be reused.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The original intent in cacheinfo was that an architecture
specific populate_cache_leaves() would probe the hardware
and then cache_shared_cpu_map_setup() and
cache_override_properties() would provide firmware help to
extend/expand upon what was probed. Arm64 was really
the only architecture that was working this way, and
with the removal of most of the hardware probing logic it
became clear that it was possible to simplify the logic a bit.
This patch combines the walk of the DT nodes with the
code updating the cache size/line_size and nr_sets.
cache_override_properties() (which was DT specific) is
then removed. The result is that cacheinfo.of_node is
no longer used as a temporary place to hold DT references
for future calls that update cache properties. That change
helps to clarify its one remaining use (matching
cacheinfo nodes that represent shared caches) which
will be used by the ACPI/PPTT code in the following patches.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
