| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Deleted a dbg function because this function has the risk of
address leakage. In addition, this function is only used for
debugging in the early stage and is not required in the future.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
| Call trace:
| pci_irq_vector+0xfc/0x140
| hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| device_release_driver+0x3c/0x60
| pci_stop_bus_device+0xfc/0x22c
| pci_stop_and_remove_bus_device+0x38/0x70
| pci_iov_remove_virtfn+0x108/0x1c0
| sriov_disable+0x7c/0x1e4
| pci_disable_sriov+0x4c/0x6c
| hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
| hpre_remove+0x1a8/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| driver_detach+0x168/0x2d0
| bus_remove_driver+0xc0/0x230
| driver_unregister+0x58/0xdc
| pci_unregister_driver+0x40/0x220
| hpre_exit+0x34/0x64 [hisi_hpre]
| __arm64_sys_delete_module+0x374/0x620
[...]
| Call trace:
| free_msi_irqs+0x25c/0x300
| pci_disable_msi+0x19c/0x264
| pci_free_irq_vectors+0x4c/0x70
| hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
| hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
[...]
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. Remove redundant array element, prevent the size obtained by
ARRAY_SIZE() from qm_log_hw_error is greater than actual size.
2. Add comments in function qm_set_vf_mse() and qm_cq_ctx_cfg()
to make it easier to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT'
and 'QP_CLOSE' status of queue are not actually used. Currently,
driver only needs to switch status when the device or queue
is enabled or stopped, Therefore, remove unneeded status to
simplify driver. In addition, rename'QM_START to'QM_WORK' for
ease to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When device is abnormal and reports abnormal interrupt event to driver,
the driver can print device information for error analysis. This patch
adds some device error-related information output after the device reports
an abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][ C23] Call trace:
[ 1461.981890][ C23] complete+0x8c/0xf0
[ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][ C23] process_one_work+0x1c4/0x470
[ 1462.020052][ C23] worker_thread+0x150/0x3c4
[ 1462.024735][ C23] kthread+0x108/0x13c
[ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.
This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If the temporarily applied memory is used to set or get the xqc
information, the driver releases the memory immediately after the
hardware mailbox operation time exceeds the driver waiting time.
However, the hardware does not cancel the operation, so the hardware
may write data to released memory.
Therefore, when the driver is bound to a device, the driver reserves
memory for the xqc configuration. The subsequent xqc configuration
uses the reserved memory to prevent hardware from accessing the
released memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the Kunpeng accelerator executes tasks such as encryption
and decryption have minimum requirements on the number of device
queues. If the number of queues does not meet the requirement,
the process initialization will fail. Therefore, the driver checks
the number of queues on the device before registering the algorithm.
If the number does not meet the requirements, the driver does not register
the algorithm to crypto subsystem, the device is still added to the
qm_list.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The type of aeq has only 4bits in dw0 17 to 20bits, but 15bits(17 to
31bits) are read in function qm_aeq_thread(). The remaining 11bits(21
to 31bits) are reserved for aeq, but may not be 0. To avoid getting
incorrect value of type, other bits are cleared.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.
After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.
Fixes: 8bbecfb402f7 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When both the accelerator device and SMMU are busy,
the processing time of the doorbell may be prolonged.
As a result, the doorbell may timeout, especially in the sva
scenario. Therefore, the doorbell timeout is increased.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the system is shut down, the process is killed, but the
accelerator device does not stop executing the tasks. If the
accelerator device still accesses the memory and writes back data
to the memory after the memory is reclaimed by the system,
an NFE error may occur. Therefore, before the system is shut
down, the driver needs to stop the device and write data back
to the memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before removing the driver, flush inter-function communication
work, and subsequent communication work is not processed.
This prevents communication threads from accessing released memory.
Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
With CONFIG_ACPI enabled for RISC-V, this driver gets enabled in
allmodconfig build. However, build fails with clang and below
error is seen.
drivers/crypto/hisilicon/qm.c:627:10: error: invalid output constraint '+Q' in asm
"+Q" (*((char __iomem *)fun_base))
^
This is expected error with clang due to the way it is designed.
To fix this issue, move arm64 assembly code under #if.
Link: https://github.com/ClangBuiltLinux/linux/issues/999
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[sunilvl@ventanamicro.com: Moved tmp0 and tmp1 into the #if]
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230515054928.2079268-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
In the function, qm_get_qos_value(), a struct bus_type * is used, but it
really should be a const pointer as it is not modified anywhere in the
function, and the driver core function it is used in expects a constant
pointer.
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230313182918.1312597-29-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
1. Remove extra blank lines.
2. Remove extra spaces.
3. Use spaces instead of tabs around '=' and '\',
to ensure consistent coding styles.
4. Macros should be capital letters, change 'QM_SQC_VFT_NUM_MASK_v2'
to 'QM_SQC_VFT_NUM_MASK_V2'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The return values of some functions have been modified,
but the comments have not been modified together. The
comments must be updated to be consistent with the functions.
Also move comments over the codes instead of right place
to ensure consistent coding styles.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The accelerator devices support multiple interrupts.
To better reflect purpose of each interrupt function,
change function name 'qm_irq' to 'qm_eq_irq' and 'do_qm_irq'
to 'do_qm_eq_irq'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'act_q_num = min_t(int, act_q_num, max_qp_num)', the type
of 'act_q_num' and 'max_qp_num' are both 'u32', so
use min() instead of min_t().
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. Remove some macros define since it is not used.
2. Remove enum QM_HW_UNKNOWN since it is not used.
3. Remove unused member 'is_frozen' in 'hisi_qm' structure.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Define the device isolation strategy by the device driver. The
user configures a hardware error threshold value by uacce interface.
If the number of hardware errors exceeds the value of setting error
threshold in one hour. The device will not be available in user space.
The VF device use the PF device isolation strategy. All the hardware
errors are processed by PF driver.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20221119074817.12063-4-yekai13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In function 'hisi_qm_resume', if the device fails to be started,
directly returning error code will cause the device to be unavailable.
However, the failure may be caused by device error, which will be
reported to the driver, and driver can reset and restart device.
Therefore, check device status instead of returning error code
directly. Returns 0 if device error has occurred, otherwise returns
error code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'QM_XEQ_DEPTH_CAP' mask value is GENMASK(31, 0) instead of GENMASK(15, 0).
If the mask value is incorrect, will cause abnormal events cannot be
handled. So fix it.
Fixes: 129a9f340172 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Considering that the qm feature and debugfs feature are independent.
The code related to debugfs is getting larger and larger. It should be
separate as a debugfs file. So move some debugfs code to new file from
qm file. The qm code logic is not modified. And maintainability is
enhanced.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The last register logic and different register logic are combined.
Use "u32" instead of 'int' in the regs function input parameter to
simplify some checks.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no security data in the pointer. It is only a value transferred
as a structure. It makes no sense to zero a variable that is on the stack.
So not need to set the pointer to null.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Because the permission on the VF debugfs file is "0444". So
the VF function checking is redundant in qos writing api.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The pci bdf number check is added for qos written by using the pci api.
Directly get the devfn by pci_dev, so delete some redundant code.
And use the kstrtoul instead of sscanf to simplify code.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Increase the buffer to prevent stack overflow by fuzz test. The maximum
length of the qos configuration buffer is 256 bytes. Currently, the value
of the 'val buffer' is only 32 bytes. The sscanf does not check the dest
memory length. So the 'val buffer' may stack overflow.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After the device is reset, the VF needs to re-enable communication
interrupt before the VF sends restart complete message to the PF.
If the interrupt is re-enabled after the VF notifies the PF, the PF
may fail to send messages to the VF after receiving VF's restart
complete message.
Fixes: 760fe22cf5e9 ("crypto: hisilicon/qm - update reset flow")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In qm_get_xqc_depth(), parameters low_bits and high_bits save
the values of the corresponding bits. However, the values saved by the
two parameters are opposite. As a result, the values returned to the
callers are incorrect.
Fixes: 129a9f340172 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
dev_to_node() can handle the case when CONFIG_NUMA is not set, so the
check of CONFIG_NUMA is redundant and can be removed.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The default qos value is not initialized when sriov is repeatedly enabled
and disabled. So add the vf qos value initialized in the sriov enable
process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The value of qm algorithm can change dynamically according to the
value of the capability register.
Add xxx_set_qm_algs() function to obtain the algs that the
hardware device supported from the capability register and set
them into usr mode attribute files.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
registers
Support get device irq information from hardware registers
instead of fixed macros.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Hardware V3 and later versions support get error type from
registers. To be compatible with later hardware versions,
get error type from registers instead of fixed marco.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To be compatible with accelerator devices of different
versions, 'UACCE_CMD_QM_SET_QP_INFO' ioctl is added to obtain
queue information in userspace, including queue depth and buffer
description size.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Hardware V3 and later versions can obtain qp num and depth supported
by the hardware from registers. To be compatible with later hardware
versions, get qp num and depth from registers instead of fixed marcos.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.
Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The accelerator drivers supports users to enable VFs through the
module parameter 'vfs_num'. If the number of VFs to be enabled
exceeds the total VFs, all VFs are enabled. Change it to the same
as enabling VF through the 'sriov_numvfs' file. Returns -ERANGE
if the number of VFs to be enabled exceeds total VFs.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In function qm_cmd_write(), if function returns from
branch 'atomic_read(&qm->status.flags) == QM_STOP',
the got dfx access is forgotten to put.
Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After the mailbox operation is complete, the result may be unsuccessful.
It needs to check the status bits of the mailbox register,
if it fails, -EIO is returned.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Judgment should not be added in the back process. So clean it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
