summaryrefslogtreecommitdiff
path: root/drivers/crypto/hisilicon/sec2
AgeCommit message (Collapse)AuthorFilesLines
2023-03-17crypto: hisilicon/sec - remove unnecessary aer.h includeBjorn Helgaas1-1/+0
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kai Ye <yekai13@huawei.com> Cc: Longfang Liu <liulongfang@huawei.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: hisilicon - Use request_complete helpersHerbert Xu1-6/+4
Use the request_complete helpers instead of calling the completion function directly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/sec - remove continuous blank linesWenkai Lin2-2/+0
Fix that put two or more continuous blank lines inside function. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/sec - fix spelling mistake 'ckeck' -> 'check'Kai Ye1-2/+2
There are a couple of spelling mistakes in sec2. Fix them. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/qm - modify the process of regs dfxKai Ye1-4/+3
The last register logic and different register logic are combined. Use "u32" instead of 'int' in the regs function input parameter to simplify some checks. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/sec - enabling clock gating of the address prefetch moduleWeili Qian1-1/+1
Change the value of clock gating register to 0x7fff to enable clock gating of the address prefetch module. When the device is idle, the clock is turned off to save power. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon - support get algs by the capability registerZhiqi Song1-2/+69
The value of qm algorithm can change dynamically according to the value of the capability register. Add xxx_set_qm_algs() function to obtain the algs that the hardware device supported from the capability register and set them into usr mode attribute files. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/sec - get algorithm bitmap from registersWenkai Lin3-121/+236
Add function 'sec_get_alg_bitmap' to get hardware algorithm bitmap before register algorithm to crypto, instead of determining whether to register an algorithm based on hardware platform's version. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get error type from hardware registersWeili Qian2-14/+48
Hardware V3 and later versions support get error type from registers. To be compatible with later hardware versions, get error type from registers instead of fixed marco. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get qp num and depth from hardware registersWeili Qian3-60/+94
Hardware V3 and later versions can obtain qp num and depth supported by the hardware from registers. To be compatible with later hardware versions, get qp num and depth from registers instead of fixed marcos. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get hardware features from hardware registersWeili Qian1-2/+2
Before hardware V3, hardwares do not provide the feature registers, driver resolves hardware differences based on the hardware version. As a result, the driver does not support the new hardware. Hardware V3 and later versions support to obtain hardware features, such as power-gating management and doorbell isolation, through the hardware registers. To be compatible with later hardware versions, the features of the current device is obtained by reading the hardware registers instead of the hardware version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/sec - delete redundant blank linesKai Ye1-2/+0
Some coding style fixes in sec crypto file. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/sec - fix auth key size errorKai Ye2-3/+4
The authentication algorithm supports a maximum of 128-byte keys. The allocated key memory is insufficient. Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08crypto: hisilicon/sec - don't sleep when in softirqZhengchao Shao2-11/+11
When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00? Fixes: 416d82204df4 ("crypto: hisilicon - add HiSilicon SEC V2 driver") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-17crypto: hisilicon/sec - only HW V2 needs to change the BD err detectionKai Ye1-7/+8
The base register address of V2 and V3 are different. HW V3 not needs to change the BD err detection. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-17crypto: hisilicon/qm - move alloc qm->wq to qm.cWeili Qian1-23/+1
Before stopping the function, the driver needs to flush all the remaining work about event irq. Therefore, accelerator drivers use a private workqueue(qm->wq) to handle event irq instead of the system workqueue. This patch moves alloc workqueue from sec_main.c and zip_main.c to qm.c. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: hisilicon/sec - fix typos in commentJulia Lawall1-2/+2
Spelling mistakes (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-05-20crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORYKai Ye1-2/+0
Should not to uses the CRYPTO_ALG_ALLOCATES_MEMORY in SEC2. The SEC2 driver uses the pre-allocated buffers, including the src sgl pool, dst sgl pool and other qp ctx resources. (e.g. IV buffer, mac buffer, key buffer). The SEC2 driver doesn't allocate memory during request processing. The driver only maps software sgl to allocated hardware sgl during I/O. So here is fix it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/sec - support last word dumpingKai Ye1-1/+54
Add last word dumping function during sec engine controller reset. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/sec - support register checkingKai Ye1-0/+53
The value of the register is changed after the task running. A debugfs file node is added to help users to check the change of register values. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-24Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds2-9/+14
Pull VFIO updates from Alex Williamson: - Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) * tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits) vfio-pci: Provide reviewers and acceptance criteria for variant drivers MAINTAINERS: adjust entry for header movement in hisilicon qm driver hisi_acc_vfio_pci: Use its own PCI reset_done error handler hisi_acc_vfio_pci: Add support for VFIO live migration crypto: hisilicon/qm: Set the VF QM state register hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices hisi_acc_qm: Move VF PCI device IDs to common header crypto: hisilicon/qm: Move few definitions to common header crypto: hisilicon/qm: Move the QM header to include/linux vfio/mlx5: Fix to not use 0 as NULL pointer PCI/IOV: Fix wrong kernel-doc identifier vfio/mlx5: Use its own PCI reset_done error handler vfio/pci: Expose vfio_pci_core_aer_err_detected() vfio/mlx5: Implement vfio_pci driver for mlx5 devices vfio/mlx5: Expose migration commands over mlx5 device vfio: Remove migration protocol v1 documentation vfio: Extend the device migration protocol with RUNNING_P2P vfio: Define device migration protocol v2 ...
2022-03-15hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driverShameer Kolothum1-0/+6
struct pci_driver pointer is an input into the pci_iov_get_pf_drvdata(). Introduce helpers to retrieve the ACC PF dev struct pci_driver pointers as we use this in ACC vfio migration driver. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Kai Ye <yekai13@huawei.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-7-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15hisi_acc_qm: Move VF PCI device IDs to common headerShameer Kolothum1-8/+7
Move the PCI Device IDs of HiSilicon ACC VF devices to a common header and also use a uniform naming convention. This will be useful when we introduce the vfio PCI HiSilicon ACC live migration driver in subsequent patches. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Link: https://lore.kernel.org/r/20220308184902.2242-4-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15crypto: hisilicon/qm: Move the QM header to include/linuxShameer Kolothum1-1/+1
Since we are going to introduce VFIO PCI HiSilicon ACC driver for live migration in subsequent patches, move the ACC QM header file to a common include dir. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-2-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-02-23crypto: hisilicon/sec - fix the aead software fallback for engineKai Ye1-3/+13
Due to the subreq pointer misuse the private context memory. The aead soft crypto occasionally casues the OS panic as setting the 64K page. Here is fix it. Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-18crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3Kai Ye1-3/+5
It is not need to enable sm4 extra mode in at HW V3. Here is fix it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-18crypto: hisilicon/sec - add the register configuration for HW V3Kai Ye1-11/+40
Added the register configuration of the SVA mode for HW V3. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31crypto: hisilicon/sec - use the correct print formatKai Ye1-1/+1
Use the correct print format. Printing an unsigned int value should use %u instead of %d. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31crypto: hisilicon/sec - fix the CTR mode BD configurationKai Ye2-2/+10
The CTR counter is 32bit rollover default on the BD. But the NIST standard is 128bit rollover. it cause the testing failed, so need to fix the BD configuration. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31crypto: hisilicon/sec - fix the max length of AAD for the CCM modeKai Ye1-0/+5
Fix the maximum length of AAD for the CCM mode due to the hardware limited. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31crypto: hisilicon/sec - add some comments for soft fallbackKai Ye1-6/+6
Modify the print of information that might lead to user misunderstanding. Currently only XTS mode need the fallback tfm when using 192bit key. Others algs not need soft fallback tfm. So others algs can return directly. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31crypto: hisilicon/sec - fixup icv checking enabled on Kunpeng 930Kai Ye1-1/+1
Fixup icv(integrity check value) checking enabled wrong on Kunpeng 930 Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-26crypto: hisilicon - modify the value of engine type rateKai Ye1-1/+1
Modify the value of type rate from new QM spec. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - change parameter passing of debugfs functionWeili Qian1-7/+4
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of debugfs function directly use 'qm' instead of 'filp'. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - support runtime PM for accelerator deviceWeili Qian1-6/+30
Add runtime PM support for Kunpeng930 accelerator device. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - using 'debugfs_create_file' instead of ↵Weili Qian1-1/+10
'debugfs_create_regset32' The accelerator devices support runtime PM, when device is in suspended, an exception will occur if reading registers. Therefore, this patch uses 'debugfs_create_file' instead of 'debugfs_create_regset32' to create debugfs file, and then the driver can get the device status before reading the register. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon/sec - modify the hardware endian configurationKai Ye2-27/+9
When the endian configuration of the hardware is abnormal, it will cause the SEC engine is faulty that reports empty message. And it will affect the normal function of the hardware. Currently the soft configuration method can't restore the faulty device. The endian needs to be configured according to the system properties. So fix it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon/sec - fix the abnormal exiting processKai Ye1-1/+2
Because the algs registration process has added a judgment. So need to add the judgment for the abnormal exiting process. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: hisilicon - enable sec device clock gatingWeili Qian1-5/+41
Kunpeng930 sec device supports dynamic clock gating. When doing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables sec dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-28crypto: hisilicon/sec - fix the process of disabling sva prefetchingKai Ye1-0/+3
The open interface of the sva prefetching function is distinguish the chip version. But the close interface of the sva prefetching function doesn't distinguish the chip version. As a result, the sva prefetching close operation is also performed on Kunpeng920, those registers are important on Kunpeng920, which eventually leads to abnormal hardware problems. So need to fix it immediately. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/sec - adds the max shaper type rateKai Ye1-0/+7
The SEC driver support configure each function's QoS in the Host for Kunpeng930. The SEC driver needs to configure the maximum shaper type rate. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-11crypto: hisilicon/sec - modify the SEC request structureKai Ye2-19/+22
Modify the SEC request structure, combines two common parameters of the SEC request into one parameter. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-11crypto: hisilicon/sec - add hardware integrity check value processKai Ye2-34/+48
Use hardware integrity check value process instead of soft verify process when doing aead decryption. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-11crypto: hisilicon/sec - add fallback tfm supporting for aeadsKai Ye2-5/+94
Add fallback tfm supporting for hisi_sec driver. Due to the Kunpeng920's CCM/GCM algorithm not supports 0 byte src length. So the driver needs to setting the soft fallback aead tfm. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-11crypto: hisilicon/sec - add new algorithm mode for AEADKai Ye3-34/+345
Add new algorithm mode for AEAD: CCM(AES), GCM(AES), CCM(SM4), GCM(SM4). Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/sec - fixup 3des minimum key size declarationKai Ye1-2/+2
Fixup the 3des algorithm minimum key size declaration. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/sec - add fallback tfm supporting for XTS modeKai Ye2-3/+86
Add fallback tfm supporting for hisi_sec driver. Due to the hardware not supports 192bit key length when using XTS mode. So the driver needs to setting the soft fallback skcipher tfm for user. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/sec - add new skcipher mode for SECKai Ye2-12/+94
Add new skcipher algorithms for Kunpeng930 SEC: OFB(AES), CFB(AES), CTR(AES), OFB(SM4), CFB(SM4), CTR(SM4). Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/sec - driver adapt to new SQEKai Ye3-43/+256
Due to Kunpeng930 adds new SQE data structure, the SEC driver needs to be upgraded. It mainly includes bd parsing process and bd filling process. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-08 15:51:13 +0000