| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 6908c5f4f066a0412c3d9a6f543a09fa7d87824b ]
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d41d75fe1b751ee6b347bf1cb1cfe9accc4fcb12 ]
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d956692c7dd523b331d4556ee03def8dd02609dc ]
The ZUC-256 EEA (encryption) and EIA (integrity) algorithms are not
supported on QAT GEN5 devices, as their current implementation does not
align with the NIST specification. Earlier versions of the ZUC-256
specification used a different initialization scheme, which has since
been revised to comply with the 5G specification.
Due to this misalignment with the updated specification, remove support
for ZUC-256 EEA and EIA for QAT GEN5 by masking out the ZUC-256
capability.
Fixes: fcf60f4bcf549 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 254923ca8715f623704378266815b6d14eb26194 ]
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Fixes: bbfdde7d195f ("crypto: qat - add bank save and restore flows")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53669ff591d4deb2d80eed4c07593ad0c0b45899 ]
The commit ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cc871ad0173e8bc22f80e3609e34d546d30ef1a ]
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
qat_free_dc_data+0x4f/0x60 [intel_qat]
qat_compression_event_handler+0x3d/0x1d0 [intel_qat]
adf_dev_shutdown+0x6d/0x1a0 [intel_qat]
adf_dev_down+0x32/0x50 [intel_qat]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2c4e8b228733bfbcaf49408fdf94d220f6eb78fc upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9a6e9279b2998e2610c70b0dfc80a234f97c76c upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8ba ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 845bc952024dbf482c7434daeac66f764642d52d upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e83 ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 097143f23a1164bfd1b6f70279d229be44da2e30 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71e0cc1eab584d6f95526a5e8c69ec666ca33e1b upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc0e ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unused dst_null support.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c84 ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The FW image size check is already performed in the function
qat_uclo_check_image() before calling `qat_uclo_map_auth_fw()`.
Therefore, the additional check in `qat_uclo_map_auth_fw()` is redundant
and can be safely removed.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the members `css_key` and `css_signature` which are not used for
doing the firmware authentication.
The signed image pointer can be calculated using the pointer to the CSS
header and the length of the CSS header, making these members redundant.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the representation of fuses in the accelerator device
structure from a single value to an array.
This allows the structure to accommodate additional fuses that
are required for future generations of QAT hardware.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Introduce the ADF_CSR_WR_LO_HI macro to simplify writing a 64-bit values
to hardware registers.
This macro works by splitting the 64-bit value into two 32-bit segments,
which are then written separately to the specified lower and upper
register offsets.
Update the adf_gen4_set_ssm_wdtimer() function to utilize this newly
introduced macro.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The service parsing logic is used to parse the configuration string
provided by the user using the attribute qat/cfg_services in sysfs.
The logic relies on hard-coded strings. For example, the service
"sym;asym" is also replicated as "asym;sym".
This makes the addition of new services or service combinations
complex as it requires the addition of new hard-coded strings for all
possible combinations.
This commit addresses this issue by:
* reducing the number of internal service strings to only the basic
service representations.
* modifying the service parsing logic to analyze the service string
token by token instead of comparing a whole string with patterns.
* introducing the concept of a service mask where each service is
represented by a single bit.
* dividing the parsing logic into several functions to allow for code
reuse (e.g. by sysfs-related functions).
* introducing a new, device generation-specific function to verify
whether the requested service combination is supported by the
currently used device.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The symbol `adf_cfg_services` is only used on the intel_qat module.
There is no need to export it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The objects in the qat_common Makefile are currently listed in a random
order.
Reorder the objects alphabetically to make it easier to find where to
add a new object.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Align with kbuild documentation by using <module_name>-y instead of
<module_name>-objs, following the kernel convention for building modules
from multiple object files.
Link: https://docs.kernel.org/kbuild/makefiles.html#loadable-module-goals-obj-m
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XP10 algorithm is not supported by any QAT device.
Remove the definition of bit 7 (ICP_QAT_FW_COMP_20_CMD_XP10_COMPRESS)
and bit 8 (ICP_QAT_FW_COMP_20_CMD_XP10_DECOMPRESS) in the firmware
command id enum and rename them as reserved.
Those bits shall not be used in future.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
use debugfs_{create_file,get}_aux_num() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-15-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
The adf_init_aer() won't destroy device_reset_wq when alloc_workqueue()
for device_sriov_wq failed. Add destroy_workqueue for device_reset_wq to
fix this issue.
Fixes: 4469f9b23468 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
|
|
There is a spelling mistake of 'accelaration' in comments which
should be 'acceleration'.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'struct pm_status_row' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update the prototype of some functions accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4400 1059 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
After:
=====
text data bss dec hex filename
5216 243 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Resetting the service arbiter config can cause potential issues
related to response ordering and ring flow control check in the
event of AER or device hang. This is because it results in changing
the default response ring size from 32 bytes to 16 bytes. The service
arbiter config reset also disables response ring flow control check.
Thus, by removing this reset we can prevent the service arbiter from
being configured inappropriately, which leads to undesired device
behaviour in the event of errors.
Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
adf_devmgr_get_first has been unused since commit
4a4b0bad0653 ("crypto: qat - fix crypto_get_instance_node function")
Remove it.
(Build tested only, I don't own the hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read.
Fixes: 10484c647af6 ("crypto: qat - refactor fw config logic for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access.
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640a6 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel. |
