| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 2593f7e0dc93a898a84220b3fb180d86f1ca8c60 ]
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d5085a ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d5085a ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cb16dfed0093217a68c0faa9394fa5823927e04c upstream.
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.
When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.
So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.
Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da8d493a80993972c427002684d0742560f3be4a upstream.
Since the conversion to using the TZ allocator, the efivars service is
registered before the memory pool has been allocated, something which
can lead to a NULL-pointer dereference in case of a racing EFI variable
access.
Make sure that all resources have been set up before registering the
efivars.
Fixes: 6612103ec35a ("firmware: qcom: qseecom: convert to using the TZ allocator")
Cc: stable@vger.kernel.org # 6.11
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250120151000.13870-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fbf10b86f6057cf79300720da4ea4b77e6708b0d ]
imx_scu_probe() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it. Add a of_node_put() call
after done with the node.
Fixes: f25a066d1a07 ("firmware: imx-scu: Support one TX and one RX")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f048b202333b967782a98aa21bb3354dc379bbf ]
Set the error code if devm_qcom_tzmem_pool_new() fails. Don't return
success.
Fixes: 1e76b546e6fc ("firmware: qcom: scm: Cleanup global '__scm' on probe failures")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a0845467-4f83-4070-ab1e-ff7e6764609f@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07e0d99a2f701123ad3104c0f1a1e66bce74d6e5 ]
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2b90e7ace79774a3540ce569e000388f8d22c9e0 upstream.
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe08b7d5085a9774abc30c26d5aebc5b9cdd6091 ]
Change calls to async regmap write functions to use the normal
blocking writes so that the cs35l56 driver can use spi_bus_lock() to
gain exclusive access to the SPI bus.
As this is part of a fix, it makes only the minimal change to swap the
functions to the blocking equivalents. There's no need to risk
reworking the buffer allocation logic that is now partially redundant.
The async writes are a 12-year-old workaround for inefficiency of
synchronous writes in the SPI subsystem. The SPI subsystem has since
been changed to avoid the overheads, so this workaround should not be
necessary.
The cs35l56 driver needs to use spi_bus_lock() prevent bus activity
while it is soft-resetting the cs35l56. But spi_bus_lock() is
incompatible with spi_async() calls, which will fail with -EBUSY.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be6686b823b30a69b1f71bde228ce042c78a1941 ]
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab027c488fc4a1fff0a5b712d4bdb2d2d324e8f8 ]
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ba69e0750b0362870294adab09339a0c39c3beaf upstream.
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 94f48ecf0a538019ca2025e0b0da391f8e7cc58c ]
Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer
dereference") makes it explicit that qcom_scm_get_tzmem_pool() can
return NULL, therefore its users should handle this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-5-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b628510397b5cafa1f5d3e848a28affd1c635302 upstream.
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. We all known barriers are
paired (see memory-barriers.txt: "Note that write barriers should
normally be paired with read or address-dependency barriers"), therefore
accessing it from concurrent contexts requires read barrier. Previous
commit added such barrier in qcom_scm_is_available(), so let's use that
directly.
Lack of this read barrier can result in fetching stale '__scm' variable
value, NULL, and dereferencing it.
Note that barrier in qcom_scm_is_available() satisfies here the control
dependency.
Fixes: ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer dereference")
Fixes: 449d0d84bcd8 ("firmware: qcom: scm: smc: switch to using the SCM allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-2-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a744cceebd0480cb39587b3b1339d66a9d14063 upstream.
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. It also claimed that it
added a read barrier, because as we all known barriers are paired (see
memory-barriers.txt: "Note that write barriers should normally be paired
with read or address-dependency barriers"), however it did not really
add it.
The offending commit used READ_ONCE() to access '__scm' global which is
not a barrier.
The barrier is needed so the store to '__scm' will be properly visible.
This is most likely not fatal in current driver design, because missing
read barrier would mean qcom_scm_is_available() callers will access old
value, NULL. Driver does not support unbinding and does not correctly
handle probe failures, thus there is no risk of stale or old pointer in
'__scm' variable.
However for code correctness, readability and to be sure that we did not
mess up something in this tricky topic of SMP barriers, add a read
barrier for accessing '__scm'. Change also comment from useless/obvious
what does barrier do, to what is expected: which other parts of the code
are involved here.
Fixes: 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-1-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ba14d9f490aef9fd535c04e9e62e1169eb7a055 upstream.
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e1e17a1715982201034024863efbf238bee2bdf9 ]
Fix ISCSI_IBFT Kconfig entry, replace tab with a space character.
Fixes: 138fe4e0697 ("Firmware: add iSCSI iBFT Support")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19fdc68aa7b90b1d3d600e873a3e050a39e7663d ]
A build with W=1 fails because there are code and data that are not
needed or used when CONFIG_EFI is not set. Move the "#ifdef CONFIG_EFI"
block to earlier in the source file so that the unused code/data are
not built.
drivers/firmware/efi/sysfb_efi.c:345:39: warning: ‘efifb_fwnode_ops’ defined but not used [-Wunused-const-variable=]
345 | static const struct fwnode_operations efifb_fwnode_ops = {
| ^~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:238:35: warning: ‘efifb_dmi_swap_width_height’ defined but not used [-Wunused-const-variable=]
238 | static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:188:35: warning: ‘efifb_dmi_system_table’ defined but not used [-Wunused-const-variable=]
188 | static const struct dmi_system_id efifb_dmi_system_table[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 15d27b15de96 ("efi: sysfb_efi: fix build when EFI is not set")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071933.20nlmJJt-lkp@intel.com/
Cc: David Rheinsberg <david@readahead.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e76b546e6fca7eb568161f408133904ca6bcf4f ]
If SCM driver fails the probe, it should not leave global '__scm'
variable assigned, because external users of this driver will assume the
probe finished successfully. For example TZMEM parts ('__scm->mempool')
are initialized later in the probe, but users of it (__scm_smc_call())
rely on the '__scm' variable.
This fixes theoretical NULL pointer exception, triggered via introducing
probe deferral in SCM driver with call trace:
qcom_tzmem_alloc+0x70/0x1ac (P)
qcom_tzmem_alloc+0x64/0x1ac (L)
qcom_scm_assign_mem+0x78/0x194
qcom_rmtfs_mem_probe+0x2d4/0x38c
platform_probe+0x68/0xc8
Fixes: 40289e35ca52 ("firmware: qcom: scm: enable the TZ mem allocator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-4-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
esre_attribute::store() is not needed since commit af97a77bc01c (efi:
Move some sysfs files to be read-only by root). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.
EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:
- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;
- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.
Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Just some cleanups and bug fixes this time around:
- Align handling of the compiled-in command line with the core kernel
- Measure the initrd into the TPM also when it was loaded via the EFI
file I/O protocols
- Clean up TPM event log handling
- Sanity check the EFI memory attributes table, and apply it after
kexec too
- Assorted other fixes"
* tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Fix memory leak in efivar_ssdt_load
efi/libstub: Take command line overrides into account for loaded files
efi/libstub: Fix command line fallback handling when loading files
efi/libstub: Parse builtin command line after bootloader provided one
x86/efi: Apply EFI Memory Attributes after kexec
x86/efi: Drop support for the EFI_PROPERTIES_TABLE
efi/memattr: Ignore table if the size is clearly bogus
efi/zboot: Fix outdated comment about using LoadImage/StartImage
efi/libstub: Free correct pointer on failure
libstub,tpm: do not ignore failure case when reading final event log
tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size
tpm: do not ignore memblock_reserve return value
tpm: fix signed/unsigned bug when checking event logs
efi/libstub: measure initrd to PCR9 independent of source
efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline()
efi/libstub: fix efi_parse_options() ignoring the default command line
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzun |
