summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-06-18drm/amd/display: Fix potential memory leak in DMUB hw_initRoman Li1-2/+2
[ Upstream commit c5699e2d863f58221044efdc3fa712dd32d55cde ] [Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios. [How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-18drm/amd/display: Allow bandwidth validation for 0 streams.Bindu Ramamurthy1-1/+1
[ Upstream commit ba8e59773ae59818695d1e20b8939282da80ec8c ] [Why] Bandwidth calculations are triggered for non zero streams, and in case of 0 streams, these calculations were skipped with pstate status not being updated. [How] As the pstate status is applicable for non zero streams, check added for allowing 0 streams inline with dcn internal bandwidth validations. Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03drm/amd/display: Disconnect non-DP with no EDIDChris Park1-0/+18
[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ] [Why] Active DP dongles return no EDID when dongle is connected, but VGA display is taken out. Current driver behavior does not remove the active display when this happens, and this is a gap between dongle DTP and dongle behavior. [How] For active DP dongles and non-DP scenario, disconnect sink on detection when no EDID is read due to timeout. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22drm/amd/display: Fix two cursor duplication when using overlayRodrigo Siqueira1-0/+51
[ Upstream commit 16e9b3e58bc3fce7391539e0eb3fd167cbf9951f ] Our driver supports overlay planes, and as expected, some userspace compositor takes advantage of these features. If the userspace is not enabling the cursor, they can use multiple planes as they please. Nevertheless, we start to have constraints when userspace tries to enable hardware cursor with various planes. Basically, we cannot draw the cursor at the same size and position on two separated pipes since it uses extra bandwidth and DML only run with one cursor. For those reasons, when we enable hardware cursor and multiple planes, our driver should accept variations like the ones described below: +-------------+ +--------------+ | +---------+ | | | | |Primary | | | Primary | | | | | | Overlay | | +---------+ | | | |Overlay | | | +-------------+ +--------------+ In this scenario, we can have the desktop UI in the overlay and some other framebuffer attached to the primary plane (e.g., video). However, userspace needs to obey some rules and avoid scenarios like the ones described below (when enabling hw cursor): +--------+ |Overlay | +-------------+ +-----+-------+ +-| |--+ | +--------+ | +--------+ | | +--------+ | | |Overlay | | |Overlay | | | | | | | | | | | | | | +--------+ | +--------+ | | | | Primary | | Primary | | Primary | +-------------+ +-------------+ +-------------+ +-------------+ +-------------+ | +--------+ | Primary | | |Overlay | | | | | | | | | +--------+ | +--------+ | | Primary | | |Overlay | | +-------------+ +-| |--+ +--------+ If the userspace violates some of the above scenarios, our driver needs to reject the commit; otherwise, we can have unexpected behavior. Since we don't have a proper driver validation for the above case, we can see some problems like a duplicate cursor in applications that use multiple planes. This commit fixes the cursor issue and others by adding adequate verification for multiple planes. Change since V1 (Harry and Sean): - Remove cursor verification from the equation. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19drm/amd/display: Initialize attribute for hdcp_srm sysfs fileDavid Ward1-0/+1
commit fe1c97d008f86f672f0e9265f180c22451ca3b9f upstream. It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must be called to initialize it. (Note: "initialization" only sets the .attr.key member in this struct; it does not change the value of any other members.) Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot: BUG: key ffff9248900cd148 has not been registered! Fixes: 9037246bb2da ("drm/amd/display: Add sysfs interface for set/get srm") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586 Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: David Ward <david.ward@gatech.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19drm/amd/display: add handling for hdcp2 rx id list validationDingchen (David) Zhang1-0/+2
[ Upstream commit 4ccf9446b2a3615615045346c97f8a1e2a16568a ] [why] the current implementation of hdcp2 rx id list validation does not have handler/checker for invalid message status, e.g. HMAC, the V parameter calculated from PSP not matching the V prime from Rx. [how] return a generic FAILURE for any message status not SUCCESS or REVOKED. Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19drm/amd/display: fixed divide by zero kernel crash during dsc enablementRobin Singh1-6/+9
[ Upstream commit 19cc1f3829567e7dca21c1389ea6407b8f5efab4 ] [why] During dsc enable, a divide by zero condition triggered the kernel crash. [how] An IGT test, which enable the DSC, was crashing at the time of restore the default dsc status, becaue of h_totals value becoming 0. So add a check before divide condition. If h_total is zero, gracefully ignore and set the default value. kernel panic log: [ 128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI [ 128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G W 5.4.19-android-x86_64 #1 [ 128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020 [ 128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu] [ 128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ...... [ 128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246 ...... [ 128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0 [ 128.865695] Call Trace: [ 128.869712] hubp3_setup+0x1f/0x7f [amdgpu] [ 128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu] [ 128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu] [ 128.885706] dc_commit_state+0x3d2/0x658 [amdgpu] [ 128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu] [ 128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu] [ 128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu] [ 128.905706] ? __is_insn_slot_addr+0x43/0x48 [ 128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu] [ 128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu] [ 128.921700] ? usleep_range+0x7c/0x7c [ 128.925705] ? preempt_count_sub+0xf/0x18 [ 128.929706] ? _raw_spin_unlock_irq+0x13/0x24 [ 128.933732] ? __wait_for_common+0x11e/0x18f [ 128.937705] ? _raw_spin_unlock_irq+0x13/0x24 [ 128.941706] ? __wait_for_common+0x11e/0x18f [ 128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper] [ 128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper] [ 128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu] [ 128.961705] ? drm_atomic_check_only+0x543/0x68d [drm] [ 128.969705] ? drm_atomic_set_property+0x760/0x7af [drm] [ 128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm] [ 128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm] [ 128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm] [ 128.989706] drm_ioctl_kernel+0x82/0xda [drm] [ 128.993706] drm_ioctl+0x225/0x319 [drm] [ 128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm] [ 129.001706] ? preempt_count_sub+0xf/0x18 [ 129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu] [ 129.009705] vfs_ioctl+0x1d/0x2a [ 129.013705] do_vfs_ioctl+0x419/0x43d [ 129.017707] ksys_ioctl+0x52/0x71 [ 129.021707] __x64_sys_ioctl+0x16/0x19 [ 129.025706] do_syscall_64+0x78/0x85 [ 129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Robin Singh <Robin.Singh@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19drm/amd/display: Force vsync flip when reconfiguring MPCCAnthony Wang1-0/+4
[ Upstream commit 56d63782af9bbd1271bff1422a6a013123eade4d ] [Why] Underflow observed when disabling PIP overlay in-game when vsync is disabled, due to OTC master lock not working with game pipe which is immediate flip. [How] When performing a full update, override flip_immediate value to false for all planes, so that flip occurs on vsync. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14drm/amd/display: use GFP_ATOMIC in dcn20_resource_constructNirmoy Das4-18/+18
[ Upstream commit 3bb1105071fb974e3e3ca2f92ddfd69c81285ab6 ] Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct() can't sleep. Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311 as dcn20_resource_construct() also calls into SMU functions which does mutex_lock(). Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14drm/amd/display: Fix off by one in hdmi_14_process_transaction()Dan Carpenter1-4/+5
[ Upstream commit 8e6fafd5a22e7a2eb216f5510db7aab54cc545c1 ] The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code. Fixes: 4c283fdac08a ("drm/amd/display: Add HDCP module") Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14drm/amd/display: Reject non-zero src_y and src_x for video planesHarry Wentland1-0/+17
commit d89f6048bdcb6a56abb396c584747d5eeae650db upstream. [Why] This hasn't been well tested and leads to complete system hangs on DCN1 based systems, possibly others. The system hang can be reproduced by gesturing the video on the YouTube Android app on ChromeOS into full screen. [How] Reject atomic commits with non-zero drm_plane_state.src_x or src_y values. v2: - Add code comment describing the reason we're rejecting non-zero src_x and src_y - Drop gerrit Change-Id - Add stable CC - Based on amd-staging-drm-next v3: removed trailing whitespace Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Cc: nicholas.kazlauskas@amd.com Cc: amd-gfx@lists.freedesktop.org Cc: alexander.deucher@amd.com Cc: Roman.Li@amd.com Cc: hersenxs.wu@amd.com Cc: danny.wang@amd.com Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11drm/amd/display: Try YCbCr420 color when YCbCr444 failsWerner Sembach1-0/+9
[ Upstream commit 68eb3ae3c63708f823aeeb63bb15197c727bd9bf ] When encoder validation of a display mode fails, retry with less bandwidth heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups to support 4k60Hz output, which previously failed silently. On some setups, while the monitor and the gpu support display modes with pixel clocks of up to 600MHz, the link encoder might not. This prevents YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be possible. However, which color mode is used is decided before the link encoder capabilities are checked. This patch fixes the problem by retrying to find a display mode with YCbCr420 enforced and using it, if it is valid. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: Fix UBSAN: shift-out-of-bounds warningAnson Jacob5-25/+115
[ Upstream commit 54718747a6e1037317a8b3610c3be40621b2b75e ] [Why] On NAVI14 CONFIG_UBSAN reported shift-out-of-bounds at display_rq_dlg_calc_20v2.c:304:38 rq_param->misc.rq_c.blk256_height is 0 when chroma(*_c) is invalid. dml_log2 returns -1023 for log2(0), although log2(0) is undefined. Which ended up as: rq_param->dlg.rq_c.swath_height = 1 << -1023 [How] Fix applied on all dml versions. 1. Ensure dml_log2 is only called if the argument is greater than 0. 2. Subtract req128_l/req128_c from log2_swath_height_l/log2_swath_height_c only when it is greater than 0. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: Fix debugfs link_settings entryFangzhi Zuo1-7/+8
[ Upstream commit c006a1c00de29e8cdcde1d0254ac23433ed3fee9 ] 1. Catch invalid link_rate and link_count settings 2. Call dc interface to overwrite preferred link settings, and wait until next stream update to apply the new settings. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: fix dml prefetch validationDmytro Laktyushkin2-0/+2
[ Upstream commit 8ee0fea4baf90e43efe2275de208a7809f9985bc ] Incorrect variable used, missing initialization during validation. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: DCHUB underflow counter increasing in some scenariosAric Cyr1-1/+3
[ Upstream commit 4710430a779e6077d81218ac768787545bff8c49 ] [Why] When unplugging a display, the underflow counter can be seen to increase because PSTATE switch is allowed even when some planes are not blanked. [How] Check that all planes are not active instead of all streams before allowing PSTATE change. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool'Anson Jacob1-5/+1
[ Upstream commit 6a30a92997eee49554f72b462dce90abe54a496f ] [Why] dc_cursor_position do not initialise position.translate_by_source when crtc or plane->state->fb is NULL. UBSAN caught this error in dce110_set_cursor_position, as the value was garbage. [How] Initialise dc_cursor_position structure elements to 0 in handle_cursor_update before calling get_cursor_position. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1471 Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display/dc/dce/dce_aux: Remove duplicate line causing 'field ↵Lee Jones1-1/+0
overwritten' issue [ Upstream commit 89adc10178fd6cb68c8ef1905d269070a4d3bd64 ] Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:59: drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: note: (near initialization for ‘aux_shift.AUX_SW_AUTOINCREMENT_DISABLE’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:181:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: note: (near initialization for ‘aux_mask.AUX_SW_AUTOINCREMENT_DISABLE’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt workXiaogang Chen2-49/+80
[ Upstream commit b6f91fc183f758461b9462cc93e673adbbf95c2d ] amdgpu DM handles INTERRUPT_LOW_IRQ_CONTEXT interrupt(hpd, hpd_rx) by using work queue and uses single work_struct. If new interrupt is recevied before the previous handler finished, new interrupts(same type) will be discarded and driver just sends "amdgpu_dm_irq_schedule_work FAILED" message out. If some important hpd, hpd_rx related interrupts are missed by driver the hot (un)plug devices may cause system hang or instability, such as issues with system resume from S3 sleep with mst device connected. This patch dynamically allocates new amdgpu_dm_irq_handler_data for new interrupts if previous INTERRUPT_LOW_IRQ_CONTEXT interrupt work has not been handled. So the new interrupt works can be queued to the same workqueue_struct, instead of discard the new interrupts. All allocated amdgpu_dm_irq_handler_data are put into a single linked list and will be reused after. Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: Don't optimize bandwidth before disabling planesAric Cyr1-1/+2
[ Upstream commit 6ad98e8aeb0106f453bb154933e8355849244990 ] [Why] There is a window of time where we optimize bandwidth due to no streams enabled will enable PSTATE changing but HUBPs are not disabled yet. This results in underflow counter increasing in some hotplug scenarios. [How] Set the optimize-bandwidth flag for later processing once all the HUBPs are properly disabled. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: Check for DSC support instead of ASIC revisionEryk Brol1-1/+1
[ Upstream commit 349a19b2f1b01e713268c7de9944ad669ccdf369 ] [why] This check for ASIC revision is no longer useful and causes lightup issues after a topology change in MST DSC scenario. In this case, DSC configs should be recalculated for the new topology. This check prevented that from happening on certain ASICs that do, in fact, support DSC. [how] Change the ASIC revision to instead check if DSC is supported. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11drm/amd/display: changing sr exit latencyMartin Leung1-1/+1
[ Upstream commit efe213e5a57e0cd92fa4f328dc1963d330549982 ] [Why] Hardware team remeasured, need to update timings to increase latency slightly and avoid intermittent underflows. [How] sr exit latency update. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.xAlex Deucher1-2/+1
commit 5c458585c0141754cdcbf25feebb547dd671b559 upstream. Commit 098214999c8f added fetching of the AUX_DPHY register values from the vbios, but it also changed the default values in the case when there are no values in the vbios. This causes problems with displays with high refresh rates. To fix this, switch back to the original default value for AUX_DPHY_TX_CONTROL. Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Igor Kravchenko <Igor.Kravchenko@amd.com> Cc: Aric Cyr <Aric.Cyr@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/amd/display: Revert dram_clock_change_latency for DCN2.1Sung Lee1-1/+1
[ Upstream commit b0075d114c33580f5c9fa9cee8e13d06db41471b ] [WHY & HOW] Using values provided by DF for latency may cause hangs in multi display configurations. Revert change to previous value. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25drm/amd/display: turn DPMS off on connector unplugAurabindo Pillai3-1/+45
[ Upstream commit 3c4d55c9b9becedd8d31a7c96783a364533713ab ] [Why&How] Set dpms off on the connector that was unplugged, for the side effect of releasing some references held through deallocation of MST payload. This is the expected behaviour for non MST devices as well. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25drm/amd/display: Correct algorithm for reversed gammaCalvin Hou1-8/+18
commit 34fa493a565cc6fcee6919787c11e264f55603c6 upstream. [Why] DCN30 needs to correctly program reversed gamma curve, which DCN20 already has. Also needs to fix a bug that 252-255 values are clipped. [How] Apply two fixes into DCN30. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Calvin Hou <Calvin.Hou@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Acked-by: Vladimir Stempen <Vladimir.Stempen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amdgpu/display: handle aux backlight in backlight_get_brightnessAlex Deucher1-4/+20
commit 0ad3e64eb46d8c47de3af552e282894e3893e973 upstream. Need to fetch it via aux. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amdgpu/display: don't assert in set backlight functionAlex Deucher1-1/+0
commit dfd8b7fbd985ec1cf76fe10f2875a50b10833740 upstream. It just spams the logs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amdgpu/display: simplify backlight settingAlex Deucher1-16/+4
commit a2f8d988698d7d3645b045f4940415b045140b81 upstream. Avoid the extra wrapper function. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amd/display: Fix nested FPU context in dcn21_validate_bandwidth()Holger Hoffstätte1-4/+0
commit 15e8b95d5f7509e0b09289be8c422c459c9f0412 upstream. Commit 41401ac67791 added FPU wrappers to dcn21_validate_bandwidth(), which was correct. Unfortunately a nested function alredy contained DC_FP_START()/DC_FP_END() calls, which results in nested FPU context enter/exit and complaints by kernel_fpu_begin_mask(). This can be observed e.g. with 5.10.20, which backported 41401ac67791 and now emits the following warning on boot: WARNING: CPU: 6 PID: 858 at arch/x86/kernel/fpu/core.c:129 kernel_fpu_begin_mask+0xa5/0xc0 Call Trace: dcn21_calculate_wm+0x47/0xa90 [amdgpu] dcn21_validate_bandwidth_fp+0x15d/0x2b0 [amdgpu] dcn21_validate_bandwidth+0x29/0x40 [amdgpu] dc_validate_global_state+0x3c7/0x4c0 [amdgpu] The warning is emitted due to the additional DC_FP_START/END calls in patch_bounding_box(), which is inlined into dcn21_calculate_wm(), its only caller. Removing the calls brings the code in line with dcn20 and makes the warning disappear. Fixes: 41401ac67791 ("drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()Holger Hoffstätte1-1/+1
commit 680174cfd1e1cea70a8f30ccb44d8fbdf996018e upstream. After fixing nested FPU contexts caused by 41401ac67791 we're still seeing complaints about spurious kernel_fpu_end(). As it turns out this was already fixed for dcn20 in commit f41ed88cbd ("drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal") but never moved forward to dcn21. Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drm/amd/display: Add a backlight module optionTakashi Iwai1-0/+5
commit 7a46f05e5e163c00e41892e671294286e53fe15c upstream. There seem devices that don't work with the aux channel backlight control. For allowing such users to test with the other backlight control method, provide a new module option, aux_backlight, to specify enabling or disabling the aux backport support explicitly. As default, the aux support is detected by the hardware capability. v2: make the backlight option generic in case we add future backlight types (Alex) BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1180749 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07drm/amd/display: Guard against NULL pointer deref when get_i2c_info failsNicholas Kazlauskas1-0/+5
[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ] [Why] If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer. [How] Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1Rodrigo Siqueira1-0/+22
commit 688f97ed3f5e339c0c2c09d9ee7ff23d5807b0a7 upstream. When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04drm/amd/display: Remove Assert from dcn10_get_dig_frontendEric Bernstein2-1/+2
commit 83e6667b675f101fb66659dfa72e45d08773d763 upstream. [Why] In some cases, this function is called when DIG BE is not connected to DIG FE, in which case a value of zero isn't invalid and assert should not be hit. [How] Remove assert and handle ENGINE_ID_UNKNOWN result in calling function. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()Jan Kokemüller2-3/+19
commit 41401ac67791810dd880345962339aa1bedd3c0d upstream. dcn21_validate_bandwidth() calls functions that use floating point math. On my machine this sometimes results in simd exceptions when there are other FPU users such as KVM virtual machines running. The screen freezes completely in this case. Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the problem. This mirrors the approach used for dcn20_validate_bandwidth. Tested on a AMD Ryzen 7 PRO 4750U (Renoir). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987 Signed-off-by: Jan Kokemüller <jan.kokemueller@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Revert "drm/amd/display: Update NV1x SR latency values"Alex Deucher1-2/+2
commit 910f1601addae3e430fc7d3cd589d7622c5df693 upstream. This reverts commit 4a3dea8932d3b1199680d2056dd91d31d94d70b7. This causes blank screens for some users. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1388 Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04drm/amdgpu/display: remove hdcp_srm sysfs on device removalNirmoy Das3-3/+4
[ Upstream commit e96b1b2974989c6a25507b527843ede7594efc85 ] Fixes: 9037246bb2da5 ("drm/amd/display: Add sysfs interface for set/get srm") Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04drm/amd/display: Fix HDMI deep color output for DCE 6-11.Mario Kleiner3-0/+76
[ Upstream commit efa18405baa55a864c61d2f3cc6fe4d363818eb3 ] This fixes corrupted display output in HDMI deep color 10/12 bpc mode at least as observed on AMD Mullins, DCE-8.3. It will hopefully also provide fixes for other DCE's up to DCE-11, assuming those will need similar fixes, but i could not test that for HDMI due to lack of suitable hw, so viewer discretion is advised. dce110_stream_encoder_hdmi_set_stream_attribute() is used for HDMI setup on all DCE's and is missing color_depth assignment. dce110_program_pix_clk() is used for pixel clock setup on HDMI for DCE 6-11, and is missing color_depth assignment. Additionally some of the underlying Atombios specific encoder and pixelclock setup functions are missing code which is in the classic amdgpu kms modesetting path and the in the radeon kms driver for DCE6/DCE8. encoder_control_digx_v3() - Was missing setup code wrt. amdgpu and radeon kms classic drivers. Added here, but untested due to lack of suitable test hw. encoder_control_digx_v4() - Added missing setup code. Successfully tested on AMD mullins / DCE-8.3 with HDMI deep color output at 10 bpc and 12 bpc. Note that encoder_control_digx_v5() has proper setup code in place and is used, e.g., by DCE-11.2, but this code wasn't used for deep color setup due to the missing cntl.color_depth setup in the calling function for HDMI. set_pixel_clock_v5() - Missing setup code wrt. classic amdgpu/radeon kms. Added here, but untested due to lack of hw. set_pixel_clock_v6() - Missing setup code added. Successfully tested on AMD mullins DCE-8.3. This fixes corrupted display output at HDMI deep color output with 10 bpc or 12 bpc. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.Mario Kleiner1-4/+4
[ Upstream commit 1916866dfa4aaceba1a70db83fde569387649d93 ] In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010 and COLOR_DEPTH_121212 cases directly contradict the code comment which explains how this should work, whereas the COLOR_DEPTH_888 case is consistent with the code comments. Comment says the bitmask should be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but the implementation contradicts that: 10 bit case sets a mask for 12 bpc clamping, whereas 12 bit case sets a mask for 14 bpc clamping. Note that during my limited testing on DCE-8.3 (HDMI deep color) and DCE-11.2 (DP deep color), this didn't have any obvious ill effects, neither did fixing it change anything obvious for the better, so this fix may be inconsequential on DCE, and just reduce the confusion of innocent bystanders when reading the code and trying to investigate problems with 10 bpc+ output. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu1-1/+3
[ Upstream commit 8e92bb0fa75bca9a57e4aba2e36f67d8016a3053 ] [why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu1-8/+6
[ Upstream commit 2abaa323d744011982b20b8f3886184d56d23946 ] [why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu1-2/+2
[ Upstream commit 3ddc818d9bb877c64f5c649beab97af86c403702 ] [why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17drm/amd/display: Release DSC before acquiringMikita Lipski1-1/+5
[ Upstream commit 58180a0cc0c57fe62a799a112f95b60f6935bd96 ] [why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee1-0/+10
[ Upstream commit 1622711beebe887e4f0f8237fea1f09bb48e9a51 ] [WHY] When enabling HDMI on ComboPHY, there are not enough cloc