summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2018-11-19drm/amd/display: Adjust stream enable sequenceJoshua Aberback1-2/+3
[Why] We observed an issue where a display would not accept programming of the ignore_MSA_timing_param bit if the stream was blanked. [How] move enable_stream_features from enable_link_dp to core_link_enable_stream, after unblank_stream Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: get tail pipe before aquire free pipeEric Bernstein1-4/+3
[Why] For some complicated blending transition cases, the head pipe of the second stream may end up being a higher pipe index than the free pipe. In those cases dc_add_plane_to_context will incorrectly set the tail_pipe to the free pipe, which will cause the top_pipe and bottom_pipe to be the same [How] Move the call to resource_get_tail_pipe_for_stream() to be before call to acquire_free_pipe_for_stream(). Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: retry 3 times before successfully readingXiaodong Yan1-3/+14
DPCD Extended Receiver Capability Field [Why] 1.dpcd extended receiver capability sometimes read fail, and corrupted data leads to sink caps is not correct. 2.sometimes sink reply ack with fewer data [How] check the return value of core_link_read_dpcd, try to read again when failure happens Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: 3.2.06Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: redesign scaling rotation mathDmytro Laktyushkin1-414/+240
Change the math to work in viewport rotation when calculating viewport and viewport adjustment. This simplifies the math for viewport calculation and makes viewport adjustment easier to understand. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: clear underflow on optc unblankJun Lei1-10/+9
[why] Underflow is asserted due to some timing condition which does not actually result in visible underflow (i.e. it occurs while blanked). [how] Force clear underflow occured bit whenver we unblank. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Consolidate two-pixels-per-container checkNikola Cornij2-2/+9
[why] The condition to check for two pixels per containter has become rather long and is used in number of places. [how] Move the check to a helper function. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: calculate stream->phy_pix_clk before clock mappingYogesh Mohan Marimuthu1-0/+2
[why] phy_pix_clk is one of the variable used to check if one PLL can be shared with displays having common mode set configuration. As of now phy_pix_clock varialbe is calculated in function dc_validate_stream(). dc_validate_stream() function is called after clocks are assigned for the new display. Due to this during hotplug, when PLL sharing conditions are checked for new display phy_pix_clk variable will be 0 and for displays that are already enabled phy_pix_clk will have some value. Hence PLL will not be shared and if the display hardware doesn't have any more PLL to assign, mode set will fail due to resource unavailability. [how] Instead of only calculating the phy_pix_clk variable after the PLL is assigned for new display, this patch calculates phy_pix_clk also during the before assigning the PLL for new display. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Typo for return check value.Yongqiang Sun1-1/+1
[Why] Typo for return check value. [How] Correct one should be "return enable ? true : false;" Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Clean up dp_blank functionsDavid Francis2-16/+10
[Why] Unused variable "refresh" and incorrect comment formatting [How] Remove variable, reindent comments Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Check for dmcu initialization before calling dmcuDavid Francis2-5/+8
[Why] DMCU firmware is not required - the system is expected to run fine without it. Therefore, wherever dmcu functions could be called, dmcu initialization shoudl be checked [How] Use the helpful hook dmcu_funcs->is_dmcu_initialized Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: fix gamma not being applied correctlyMurton Liu1-1/+2
[why] Gamma was always being set as identity on SDR monitor, leading to no changes in gamma. This caused nightlight to not apply correctly. [how] Added a default gamma structure to compare against in the sdr case. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: make underflow status clear explicitJun Lei7-6/+70
[why] HUBP underflow is never cleared, which causes underflow in one test to fail another test, violating the independence requirements [how] Rather than make clearing implicit, we explicitly clear underflow status in DTN. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: expose dentist_get_divider_from_didNevenko Stupar2-1/+3
expose this functions for future use. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: resolve minor log problemsWenjing Liu1-3/+3
[Why] dc_add_stream_to_context is used to check bw requirement. It is not an error if it fails. [How] Replace DC_ERROR with DC_LOG_WARNING. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Remove dc_stream_state->statusDavid Francis5-7/+3
[Why] dc_state has an array of dc_stream_status that contain pointers to the dc_plane_state and other useful information Confusingly, dc_stream_state also contains a dc_stream_status called status. This struct was partially initialized and used in a few places [How] stream->status.link has been replaced with stream->sink->link. If a stream does not have a sink, or a sink does not have a link, something has gone seriously wrong All other properties of stream->status were zeroed by kzalloc and never initialized, so they have been replaced by the number 0 This is a refactor: no functional change is intended Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: 3.2.05Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie64-1999/+2697
into drm-next New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie1-7/+7
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-07drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul1-5/+0
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2-35/+7
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo3-46/+4
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher1-1/+2
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher1-0/+3
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher1-0/+1
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul1-5/+0
[why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2-35/+7
[why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-07drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo3-46/+4
[why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher1-1/+2
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher1-0/+3
Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher1-0/+1
Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Stop leaking planesHarry Wentland1-1/+1
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Fix misleading buffer informationShaokun Zhang1-2/+2
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06Revert "drm/amd/display: set backlight level limit to 1"Alex Deucher1-7/+0
This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Stop leaking planesHarry Wentland1-1/+1
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu: Drop amdgpu_planeHarry Wentland1-19/+19
It's unnecessarily duplicating drm_plane_type. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Fix misleading buffer informationShaokun Zhang1-2/+2
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd: Don't fail on backlight = 0David Francis1-8/+10
Amgpu's backlight update status function was returning 1 (an error value) when the backlight property was 0. This breaks users that assume 0 is a valid backlight value (which is a correct assumption) If the user passes in a backlight value of 0, tell them everything is fine, then write a value of 1 to hardware. Signed-off-by: David Francis <David.Francis@amd.com> Bugzilla: https://bugs.freedesktop.org/108668 Fixes: 416615ea9578 ("drm/amd/display: set backlight level limit to 1") Cc: Suresh.Guttula@amd.com Cc: Harry.Wentland@amd.com Cc: Samantham@posteo.net Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add condition to sync eDP SW status and HW statusLewis Huang6-0/+120
[Why] Need to disable EDP backlight when enter S4 with EDP only and resume from S4 with secondary only. [How] Align the real hw and sw state via vBios scratch register in function enable_accelerated_mode when resume from S4. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Remove the check to see if pp_display_cfg is changedFatemeh Darbehani1-2/+1
[Why] When going to full-screen mode commit_planes_for_stream tries to decrease dcf_deep_sleep value, but safe_to_lower is false, so we don't send the new value to SMU but dc context gets updated. Later when dc_post_update_surfaces_to_stream tries to lower dcf_ds when safe_to_lower is true, this check prevents the message from being sent. [How] Remove the check that compares new value with what is stored in dc_context. This check is not necessary as dcn1_update_clocks already checks if the value is different from the current dcf_dp value. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: remove CRTC_3D_STRUCTURE_V_UPDATE_MODE bit programming.Charlene Liu1-4/+2
[Description] This is based on HW programming guide update. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expose target backlight levelAnthony Koo2-0/+13
[Why] DM may want to understand any backlight optimizations applied, so DM needs a way to query from the HW both the real current backlight, which may be value during transition. And also target backlight, which may be after some backlight optimizations applied. [How] Add interface to query current and target backlight levels Target level may indicate backlight level after backlight optimization and reductions are applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Guard against null stream_state in set_crc_sourceNicholas Kazlauskas1-0/+5
[Why] The igt@kms_plane@pixel-format-pipe tests can create a sequence where stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results in a null pointer dereference. [How] Guard against stream_state being NULL before accessing its fields. This doesn't fix the root cause of the issue so a DRM_ERROR is generated to still fail the tests. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: fix mirror rotation scaling mathDmytro Laktyushkin1-41/+24
Curretly dc will incorrectly calculate viewport when there is rotation or mirror being applied Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Su Chung <Su.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Retiring set_display_requirements in dm_pp_smu.h - part4Fatemeh Darbehani4-37/+37
[Why] In DCN we want direct DC to SMU calls, with minimal interference from pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in DC and shared across different OS's. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 4: Change clock units so they match the values PPLib sends to SMU. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Remove program_csc_matrixKrunoslav Kovac4-49/+11
[Why] On DCN1/DCE, There are two functions programming OCSC: program_csc_matrix and program_output_csc. They do the same thing. [How] Consolidate to use only program_output_csc. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Fix some backlight variable stylingAnthony Koo1-10/+8
variableNamingsLikeSo aren't to convention. use_this_instead. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expand dc to use 16.16 bit backlightAnthony Koo7-79/+80
[Why] We want to increase precision for backlight setting. But DC interface takes 8 bit backlight level value only. [How] DMCU already takes 16 bit backlight level. Expand the DC interface to take 16.16 bit value. Max 32 bit backlight value (0xFFFF) will represent max backlight (100%) Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-14 20:52:45 +0000