summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06drm/amd/display: Refactor dccg35_get_other_enabled_symclk_feNicholas Susanto1-40/+25
[Why] Function used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [How] Refactor the function to correctly return the number of FEs connected to the input BE. Also, rename it for clarity. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: Normalize reg offsets on JPEG v4.0.3Lijo Lazar1-21/+15
On VFs and SOCs with GC 9.4.4, VCN RRMT is disabled. Only local register offsets should be used on JPEG v4.0.3 as they cannot handle remote access to other AIDs. Since only local offsets are used, the special write to MCM_ADDR register is no longer needed. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi1-8/+12
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi1-8/+12
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: use clamp() in amdgpu_vm_adjust_size()Li Zetao1-1/+1
When it needs to get a value within a certain interval, using clamp() makes the code easier to understand than min(max()). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd: use clamp() in amdgpu_pll_get_fb_ref_div()Li Zetao1-1/+1
When it needs to get a value within a certain interval, using clamp() makes the code easier to understand than min(max()). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: enable gfxoff quirk on HP 705G4Peng Liu1-0/+2
Enabling gfxoff quirk results in perfectly usable graphical user interface on HP 705G4 DM with R5 2400G. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Peng Liu <liupeng01@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: add raven1 gfxoff quirkPeng Liu1-0/+2
Fix screen corruption with openkylin. Link: https://bbs.openkylin.top/t/topic/171497 Signed-off-by: Peng Liu <liupeng01@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Fix spelling mistake "recompte" -> "recompute"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdkfd: Add cache line size infoDavid Belanger1-1/+7
Populate cache line size info in topology based on information from IP discovery table. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Add missing kdoc entry for 'bs_coeffs_updated' in ↵Srinivasan Shanmugam1-0/+1
dpp401_dscl_program_isharp This commit addresses a missing kdoc for the 'bs_coeffs_updated' parameter in the 'dpp401_dscl_program_isharp' function. The 'bs_coeffs_updated' is a flag indicating whether the Blur and Scale Coefficients have been updated. The 'dpp401_dscl_program_isharp' function is responsible for programming the isharp, which includes setting the isharp filter, noise gain, and blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to true, the function updates the blur and scale coefficients. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: fix invalid fence handling in amdgpu_vm_tlb_flushLang Yu1-2/+4
CPU based update doesn't produce a fence, handle such cases properly. Fixes: d8a3f0a0348d ("drm/amdgpu: implement TLB flush fence") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amdgpu: re-work VM syncingChristian König5-55/+65
Rework how VM operations synchronize to submissions. Provide an amdgpu_sync container to the backends instead of an reservation object and fill in the amdgpu_sync object in the higher layers of the code. No intended functional change, just prepares for upcomming changes. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Friedrich Vock <friedrich.vock@gmx.de> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-05Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher1-2/+4
This reverts commit 8f614469de248a4bc55fb07e55d5f4c340c75b11. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7a199557643e993d4e7357860624b8aa5d8f4340) Cc: stable@vger.kernel.org
2024-09-05Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher1-2/+4
This reverts commit bbb05f8a9cd87f5046d05a0c596fddfb714ee457. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone1-1/+2
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 29d3d6af43135de7bec677f334292ca8dab53d67) Cc: stable@vger.kernel.org
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li1-1/+12
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 988fe2862635c1b1b40e41c85c24db44ab337c13) Cc: stable@vger.kernel.org # 6.10+
2024-09-02drm/amdgpu: always allocate cleared VRAM for GEM allocationsAlex Deucher1-0/+3
This adds allocation latency, but aligns better with user expectations. The latency should improve with the drm buddy clearing patches that Arun has been working on. In addition this fixes the high CPU spikes seen when doing wipe on release. v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian) Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528 Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: Christian König <christian.koenig@amd.com> (cherry picked from commit 6c0a7c3c693ac84f8b50269a9088af8f37446863) Cc: stable@vger.kernel.org # 6.10.x
2024-09-02drm/amdgpu/mes: add mes mapping legacy queue switchJack Xiao4-20/+43
For mes11 old firmware has issue to map legacy queue, add a flag to switch mes to map legacy queue. Fixes: f9d8c5c7855d ("drm/amdgpu/gfx: enable mes to map legacy queue support") Reported-by: Andrew Worsley <amworsley@gmail.com> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.html Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 52491d97aadcde543986d596ed55f70bf2142851)
2024-09-02drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li1-1/+25
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 28d43d0895896f84c038d906d244e0a95eb243ec) Cc: stable@vger.kernel.org
2024-09-02drm/amdgpu/gfx10: use rlc safe mode for soft recoveryAlex Deucher1-0/+2
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: use rlc safe mode for soft recoveryAlex Deucher1-0/+2
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: use rlc safe mode for soft recoveryAlex Deucher1-0/+2
Protect the MMIO access with safe mode. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: use proper rlc safe mode helpersAlex Deucher1-2/+2
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: use proper rlc safe mode helpersAlex Deucher1-4/+4
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: use proper rlc safe mode helpersAlex Deucher1-2/+2
Rather than open coding it for the queue reset. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: per queue reset only on bare metalAlex Deucher1-0/+6
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: per queue reset only on bare metalAlex Deucher1-0/+6
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: per queue reset only on bare metalAlex Deucher1-0/+6
It's not supported under SR-IOV at the moment. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes11: implement mmio queue reset for gfx11Jiadong Zhu1-0/+80
Implement queue reset for graphic and compute queue. v2: use amdgpu_gfx_rlc funcs to enter/exit safe mode. v3: use gfx_v11_0_request_gfx_index_mutex() v4: fix mutex handling Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes: implement amdgpu_mes_reset_hw_queue_mmioJiadong Zhu1-0/+20
The reset_queue api could be used from kfd or kgd. v2: add use_mmio parameter for mes_reset_legacy_queue. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/mes: modify mes api for mmio queue resetJiadong Zhu4-4/+17
Add me/pipe/queue parameters for queue reset input. v2: fix build (Alex) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: fallback to driver reset compute queue directlyAlex Deucher1-14/+79
Since the MES FW resets kernel compute queue always failed, this may caused by the KIQ failed to process unmap KCQ. So, before MES FW work properly that will fallback to driver executes dequeue and resets SPI directly. Besides, rework the ring reset function and make the busy ring type reset in each function respectively. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx12: add ring reset callbacksAlex Deucher1-0/+18
Add ring reset callbacks for gfx and compute. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: rework reset sequenceAlex Deucher1-7/+19
To match other GFX IPs. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: wait for reset done before remapJiadong Zhu1-11/+30
There is a racing condition that cp firmware modifies MQD in reset sequence after driver updates it for remapping. We have to wait till CP_HQD_ACTIVE becoming false then remap the queue. v2: fix KIQ locking (Alex) v3: fix KIQ locking harder (Jessie) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: remap queue after reset successfullyJiadong Zhu1-11/+35
Kiq command unmap_queues only does the dequeueing action. We have to map the queue back with clean mqd. v2: fix up error handling (Alex) Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx10: add ring reset callbacksAlex Deucher1-0/+91
Add ring reset callbacks for gfx and compute. v2: fix gfx handling v3: wait for KIQ to complete Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: wait for reset done before remapJiadong Zhu1-1/+14
There is a racing condition that cp firmware modifies MQD in reset sequence after driver updates it for remapping. We have to wait till CP_HQD_ACTIVE becoming false then remap the queue. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: rename gfx_v11_0_gfx_init_queue()Alex Deucher1-3/+3
Rename to gfx_v11_0_kgq_init_queue() to better align with the other naming in the file. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: fallback to driver reset compute queue directly (v2)Prike Liang1-13/+71
Since the MES FW resets kernel compute queue always failed, this may caused by the KIQ failed to process unmap KCQ. So, before MES FW work properly that will fallback to driver executes dequeue and resets SPI directly. Besides, rework the ring reset function and make the busy ring type reset in each function respectively. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: 3.2.299Aric Cyr2-2/+2
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza3-73/+72
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone1-1/+2
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger4-49/+34
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add sharpness control interfaceRelja Vojvodic9-192/+138
- Add interface for controlling shapness level input into DCN. - Update SPL to support custom sharpness values. - Add support for different sharpness values depending on YUV/RGB content. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone24-161/+34
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: disable sharpness if HDR Multiplier is too largeSamson Tam1-1/+5
[Why] Certain profiles have higher HDR multiplier than SDR boost max which is not currently supported [How] Disable sharpness for these profiles Fixes: 1b0ce903fe74 ("drm/amd/display: add improvements for text display and HDR DWM and MPO") Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add dpia debug option to control power managementMeenakshikumar Somasundaram1-1/+2
[Why] To provide option to dpia control power management [How] By adding disable_usb4_pm_support bit field in dpia_debug option to control dpia power management Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amdgpu/gfx11: add ring reset callbacksAlex Deucher1-0/+18
Add ring reset callbacks for gfx and compute. Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-15 12:48:28 +0000