summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2025-03-05drm/msm/dpu: enable CDM_0 for X Elite platformDmitry Baryshkov1-0/+1
Enable CDM on the X Elite platform, allowing RGB to YUV conversion for the output. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638412/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-5-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: enable CDM_0 for SC8280XP platformDmitry Baryshkov1-0/+1
Enable CDM on the SC8280XP platform, allowing RGB to YUV conversion for the output. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638411/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-4-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: enable CDM_0 for DPUs 1.x - 4.xDmitry Baryshkov10-0/+16
Enable the CDM_0 block on DPU versions 1.x - 4.x as documented in the vendor dtsi file. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638408/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-3-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: enable CDM_0 for DPUs 5.x+Dmitry Baryshkov11-0/+11
Enable the CDM_0 block on DPU generations starting from 5.x as documented in the vendor dtsi file. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638407/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-2-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: rename CDM block definitionDmitry Baryshkov4-4/+4
The CDM block is not limited to SC7280, but it is common to all platforms since DPU 5.x. Rename it from sc7280_cdm to dpu_cdm_5_x. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638405/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-1-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: fix error pointer dereference in msm_kms_init_aspace()Dan Carpenter1-0/+1
If msm_gem_address_space_create() fails, then return right away. Otherwise it leads to a Oops when we dereference "aspace" on the next line. Fixes: eabba31a839a ("drm/msm: register a fault handler for display mmu faults") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639357/ Link: https://lore.kernel.org/r/3221e88c-3351-42e6-aeb1-69f4f014b509@stanley.mountain [DB: fixed commit id] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/hdmi: use DRM HDMI Audio frameworkDmitry Baryshkov4-111/+71
In order to simplify the driver even further and to remove the boilerplate code, rewrite the audio interface to use the DRM HDMI Audio framework. Audio InfoFames are controlled centrally via the DRM HDMI framework. Correct InfoFrame data is programmed at the atomic_pre_enable() time (if it was set before, drm_atomic_helper_connector_hdmi_update_infoframes() takes care of writing all InfoFrames, including the Audio one.) or during msm_hdmi_bridge_audio_prepare() when the new stream is started. All audio data frame management is deferred to msm_hdmi_bridge_audio_prepare() and msm_hdmi_bridge_audio_shutdown(). Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639663/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-7-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: also send the SPD and HDMI Vendor Specific InfoFramesDmitry Baryshkov1-0/+93
Extend the driver to send SPD and HDMI Vendor Specific InfoFrames. While the HDMI block has special block to send HVS InfoFrame, use GENERIC0 block instead. VENSPEC_INFO registers pack frame data in a way that requires manual repacking in the driver, while GENERIC0 doesn't have such format requirements. The msm-4.4 kernel uses GENERIC0 to send HDR InfoFrame which we do not at this point anyway. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639661/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-6-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: update HDMI_GEN_PKT_CTRL_GENERIC0_UPDATE definitionDmitry Baryshkov1-1/+1
The GENERIC0_UPDATE field is a single bit. Redefine it as boolean to simplify its usage in the driver. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639660/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-5-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: get rid of hdmi_modeDmitry Baryshkov3-17/+4
Use connector->display_info.is_hdmi instead of manually using drm_detect_hdmi_monitor(). Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639657/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-4-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: make use of the drm_connector_hdmi frameworkDmitry Baryshkov5-147/+162
Setup the HDMI connector on the MSM HDMI outputs. Make use of atomic_check hook and of the provided Infoframe infrastructure. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639656/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-3-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: program HDMI timings during atomic_pre_enableDmitry Baryshkov1-8/+15
The mode_set callback is deprecated, it doesn't get the drm_bridge_state, just mode-related argumetns. Also Abhinav pointed out that HDMI timings should be programmed before setting up HDMI PHY and PLL. Rework the code to program HDMI timings at the start of atomic_pre_enable(). Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639652/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-2-340af24b35cc@linaro.org
2025-03-05drm/msm/hdmi: switch to atomic bridge callbacksDmitry Baryshkov1-4/+9
Change MSM HDMI bridge to use atomic_* callbacks in preparation to enablign the HDMI connector support. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/639653/ Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-1-340af24b35cc@linaro.org
2025-03-05drm/msm/dpu: Set possible clones for all encodersJessica Zhang3-2/+39
Set writeback encoders as possible clones for DSI encoders and vice versa. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637498/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-14-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Reorder encoder kickoff for CWBJessica Zhang1-14/+60
Add a helper that will handle the correct order of the encoder kickoffs for concurrent writeback. For concurrent writeback, the realtime encoder must always kickoff last as it will call the trigger flush and start. This avoids the following scenario where the writeback encoder increments the pending kickoff count after the WB_DONE interrupt is fired: If the realtime encoder is kicked off first, the encoder kickoff will flush/start the encoder and increment the pending kickoff count. The WB_DONE interrupt then fires (before the writeback encoder is kicked off). When the writeback encoder enters its kickoff, it will skip the flush/start (due to CWB being enabled) and hit a frame done timeout as the frame was kicked off (and the WB_DONE interrupt fired) without the pending kickoff count being incremented. In addition, the writeback timer should only start after the realtime encoder is kicked off to ensure that we don't get timeouts when the system has a heavy load (ex. when debug logs are enabled) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637491/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-13-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Skip trigger flush and start for CWBJessica Zhang1-0/+18
For concurrent writeback, the real time encoder is responsible for trigger flush and trigger start. Return early for trigger start and trigger flush for the concurrent writeback encoders. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637505/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-12-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Start frame done timer after encoder kickoffJessica Zhang3-10/+24
Starting the frame done timer before the encoder is finished kicking off can lead to unnecessary frame done timeouts when the device is experiencing heavy load (ex. when debug logs are enabled). Thus, create a separate API for starting the encoder frame done timer and call it after the encoder kickoff is finished Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637502/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-11-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Adjust writeback phys encoder setup for CWBJessica Zhang1-3/+8
Adjust QoS remapper, OT limit, and CDP parameters to account for concurrent writeback Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637490/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-10-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Support CWB in dpu_hw_ctlJessica Zhang4-2/+57
The CWB mux has a pending flush bit and *_active register. Add support for configuring them within the dpu_hw_ctl layer. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637492/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-9-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Configure CWB in writeback encoderJessica Zhang3-3/+83
Cache the CWB block mask in the DPU virtual encoder and configure CWB according to the CWB block mask within the writeback phys encoder Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637501/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-8-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Reserve resources for CWBJessica Zhang4-4/+120
Add support for RM to reserve dedicated CWB PINGPONGs and CWB muxes For concurrent writeback, even-indexed CWB muxes must be assigned to even-indexed LMs and odd-indexed CWB muxes for odd-indexed LMs. The same even/odd rule applies for dedicated CWB PINGPONGs. Track the CWB muxes in the global state and add a CWB-specific helper to reserve the correct CWB muxes and dedicated PINGPONGs following the even/odd rule. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637495/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-7-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Fail atomic_check if multiple outputs request CDM blockJessica Zhang3-7/+14
Currently, our hardware only supports a single output using CDM block at most. Because of this, we cannot support cases where both writeback and DP output request CDM simultaneously To avoid this happening when CWB is enabled, change msm_display_topoloy.needs_cdm into a num_cdm counter to track how many outputs are requesting CDM block. Return EINVAL if multiple outputs are trying to reserve CDM. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637499/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-6-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Require modeset if clone mode status changesJessica Zhang3-8/+17
If the clone mode enabled status is changing, a modeset needs to happen so that the resources can be reassigned Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637483/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-5-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Add CWB to msm_display_topologyJessica Zhang3-3/+24
Currently, the topology is calculated based on the assumption that the user cannot request real-time and writeback simultaneously. For example, the number of LMs and CTLs are currently based off the number of phys encoders under the assumption there will be at least 1 LM/CTL per phys encoder. This will not hold true for concurrent writeback as both phys encoders (1 real-time and 1 writeback) must be driven by 1 LM/CTL when concurrent writeback is enabled. To account for this, add a cwb_enabled flag and only adjust the number of CTL/LMs needed by a given topology based on the number of phys encoders only if CWB is not enabled. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637486/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-4-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocationDmitry Baryshkov5-126/+110
Up to now the driver has been using encoder to allocate hardware resources. Switch it to use CRTC id in preparation for the next step. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637503/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-3-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: move resource allocation to CRTCDmitry Baryshkov5-134/+145
All resource allocation is centered around the LMs. Then other blocks (except DSCs) are allocated basing on the LMs that was selected, and LM powers up the CRTC rather than the encoder. Moreover if at some point the driver supports encoder cloning, allocating resources from the encoder will be incorrect, as all clones will have different encoder IDs, while LMs are to be shared by these encoders. In addition, move mode_changed() to dpu_crtc as encoder no longer has access to topology information Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [quic_abhinavk@quicinc.com: Refactored resource allocation for CDM] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [quic_jesszhan@quicinc.com: Changed to grabbing exising global state] Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> [DB: rebased on top of msm-next] [DB: fixed resource allcoation to ignore the active_changed flag] Patchwork: https://patchwork.freedesktop.org/patch/637487/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-2-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: fill CRTC resources in dpu_crtc.cDmitry Baryshkov2-37/+63
Stop poking into CRTC state from dpu_encoder.c, fill CRTC HW resources from dpu_crtc_assign_resources(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [quic_abhinavk@quicinc.com: cleaned up formatting] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637485/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-1-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: don't set crtc_state->mode_changed from atomic_check()Dmitry Baryshkov5-5/+75
The MSM driver uses drm_atomic_helper_check() which mandates that none of the atomic_check() callbacks toggles crtc_state->mode_changed. Perform corresponding check before calling the drm_atomic_helper_check() function. Fixes: 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") Reported-by: Simona Vetter <simona.vetter@ffwll.ch> Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/ Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [DB: dropped the WARN_ON] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633400/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-4-bbfd3a6cd1a4@linaro.org
2025-02-27drm/msm/a6xx: Add support for Adreno 623Jie Zhang4-1/+43
Add support for Adreno 623 GPU found in QCS8300 chipsets. Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640056/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-27drm/msm/a6xx: Fix gpucc register block for A621Jie Zhang2-2/+19
Adreno 621 has a different memory map for GPUCC block. So update a6xx_gpu_state code to dump the correct set of gpucc registers. Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640055/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-27drm/msm/a6xx: Split out gpucc register blockJie Zhang2-3/+10
Some GPUs have different memory map for GPUCC block. So split out the gpucc range from a6xx_gmu_cx_registers to a separate block to accommodate those GPUs. Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/640052/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-27drm/msm/gem: Fix error code msm_parse_deps()Dan Carpenter1-1/+1
The SUBMIT_ERROR() macro turns the error code negative. This extra '-' operation turns it back to positive EINVAL again. The error code is passed to ERR_PTR() and since positive values are not an IS_ERR() it eventually will lead to an oops. Delete the '-'. Fixes: 866e43b945bf ("drm/msm: UAPI error reporting") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637625/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-27drm/msm: Extend gpu devcore dumps with pgtbl infoRob Clark5-1/+51
In the case of iova fault triggered devcore dumps, include additional debug information based on what we think is the current page tables, including the TTBR0 value (which should match what we have in adreno_smmu_fault_info unless things have gone horribly wrong), and the pagetable entries traversed in the process of resolving the faulting iova. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/628117/
2025-02-27drm/msm: Expose DRIVER_SYNCOBJ_TIMELINERob Clark1-0/+1
Initially we didn't want to expose the cap, as it would expose a bug in the vk driver (turnip) with older mesa versions. This was fixed over a year ago (and cherry-picked to stable release branches at the time), see https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25981. So let's go ahead and expose it now. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639610/
2025-02-27drm/msm/a6xx: Fix stale rpmh votes from GPUAkhil P Oommen1-33/+39
It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-02-26drm/msm/dpu: rate limit snapshot capture for mmu faultsAbhinav Kumar3-1/+9
There is no recovery mechanism in place yet to recover from mmu faults for DPU. We can only prevent the faults by making sure there is no misconfiguration. Rate-limit the snapshot capture for mmu faults to once per msm_atomic_commit_tail() as that should be sufficient to capture the snapshot for debugging otherwise there will be a lot of DPU snapshots getting captured for the same fault which is redundant and also might affect capturing even one snapshot accurately. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638362/ Link: https://lore.kernel.org/r/20250219-abhinavk-smmu-fault-handler-v3-5-aa3f0bf4434a@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm: switch msm_kms to use msm_iommu_disp_new()Abhinav Kumar1-1/+1
Switch msm_kms to use msm_iommu_disp_new() so that the newly registered fault handler will kick-in during any mmu faults. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638360/ Link: https://lore.kernel.org/r/20250219-abhinavk-smmu-fault-handler-v3-4-aa3f0bf4434a@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/iommu: introduce msm_iommu_disp_new() for msm_kmsAbhinav Kumar2-0/+27
Introduce a new API msm_iommu_disp_new() for display use-cases. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638363/ Link: https://lore.kernel.org/r/20250219-abhinavk-smmu-fault-handler-v3-3-aa3f0bf4434a@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/iommu: rename msm_fault_handler to msm_gpu_fault_handlerAbhinav Kumar1-3/+3
In preparation of registering a separate fault handler for display, lets rename the existing msm_fault_handler to msm_gpu_fault_handler. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638358/ Link: https://lore.kernel.org/r/20250219-abhinavk-smmu-fault-handler-v3-2-aa3f0bf4434a@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm: register a fault handler for display mmu faultsAbhinav Kumar1-0/+13
In preparation to register a iommu fault handler for display related modules, register a fault handler for the backing mmu object of msm_kms. Currently, the fault handler only captures the display snapshot but we can expand this later if more information needs to be added to debug display mmu faults. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638359/ Link: https://lore.kernel.org/r/20250219-abhinavk-smmu-fault-handler-v3-1-aa3f0bf4434a@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi/phy: Define PHY_CMN_CLK_CFG[01] bitfields and simplify savingKrzysztof Kozlowski1-4/+6
Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to avoid hard-coding bit masks and shifts and make the code a bit more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638324/ Link: https://lore.kernel.org/r/20250219-drm-msm-phy-pll-cfg-reg-v5-2-d28973fa513a@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi/phy: Use dsi_pll_cmn_clk_cfg1_update() when registering PLLKrzysztof Kozlowski2-5/+4
Newly added dsi_pll_cmn_clk_cfg1_update() wrapper protects concurrent updates to PHY_CMN_CLK_CFG1 register between driver and Common Clock Framework. pll_7nm_register() still used in one place previous readl+writel, which can be simplified with this new wrapper. This is purely for readability and simplification and should have no functional impact, because the code touched here is before clock is registered via CCF, so there is no concurrency issue. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638323/ Link: https://lore.kernel.org/r/20250219-drm-msm-phy-pll-cfg-reg-v5-1-d28973fa513a@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Add check for devm_kstrdup()Haoxiang Li1-1/+8
Add check for the return value of devm_kstrdup() in dsi_host_parse_dt() to catch potential exception. Fixes: 958d8d99ccb3 ("drm/msm/dsi: parse vsync source from device tree") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638297/ Link: https://lore.kernel.org/r/20250219040712.2598161-1-haoxiang_li2024@163.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Allow values of 10 and 12 for bits per componentEugene Lepshy1-3/+15
The DRM DSC helper has various bits_per_component values - not just 8. But the DSC 1.1 block supports only 8, 10, and 12. Extend the guard accordingly and add a comment noting this limitation. Signed-off-by: Eugene Lepshy <fekz115@gmail.com> Co-developed-by: Danila Tikhonov <danila@jiaxyga.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637831/ Link: https://lore.kernel.org/r/20250217222431.82522-4-danila@jiaxyga.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dpu: Remove arbitrary limit of 1 interface in DSC topologyMarijn Suijten1-3/+4
When DSC is enabled the number of interfaces is forced to be 1, and documented that it is a "power-optimal" layout to use two DSC encoders together with two Layer Mixers. However, the same layout (two DSC hard-slice encoders with two LMs) is also used when the display is fed with data over two instead of one interface (common on 4k@120Hz smartphone panels with Dual-DSI). Solve this by simply removing the num_intf = 1 assignment as the count is already calculated by computing the number of physical encoders within the virtual encoder. Fixes: 7e9cc175b159 ("drm/msm/disp/dpu1: Add support for DSC in topology") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637649/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-3-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Set PHY usescase (and mode) before registering DSI hostMarijn Suijten1-11/+21
Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Use existing per-interface slice count in DSC timingMarijn Suijten2-15/+4
When configuring the timing of DSI hosts (interfaces) in dsi_timing_setup() all values written to registers are taking bonded-mode into account by dividing the original mode width by 2 (half the data is sent over each of the two DSI hosts), but the full width instead of the interface width is passed as hdisplay parameter to dsi_update_dsc_timing(). Currently only msm_dsc_get_slices_per_intf() is called within dsi_update_dsc_timing() with the `hdisplay` argument which clearly documents that it wants the width of a single interface (which, again, in bonded DSI mode is half the total width of the mode) resulting in all subsequent values to be completely off. However, as soon as we start to pass the halved hdisplay into dsi_update_dsc_timing() we might as well discard msm_dsc_get_slices_per_intf() since the value it calculates is already available in dsc->slice_count which is per-interface by the current design of MSM DPU/DSI implementations and their use of the DRM DSC helpers. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637648/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Drop unnecessary -ENOMEM messageKrzysztof Kozlowski1-3/+1
Kernel core already prints detailed report about memory allocation failures, so drivers should not have their own error messages. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637308/ Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-4-1bec50f37dc1@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Minor whitespace and style cleanupKrzysztof Kozlowski1-25/+26
Cleanup few obvious kernel coding style violations: missing or unnecessary braces in 'if-else', unnecessary break lines, incorrect breaking of long function declarations, unnecessary 'else' after a 'return'. No functional impact expected. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637305/ Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-3-1bec50f37dc1@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-26drm/msm/dsi: Simplify with dev_err_probe()Krzysztof Kozlowski1-59/+41
dsi_get_config(), dsi_clk_init() and msm_dsi_host_init() are called only from platform driver probe function, so using dev_err_probe() is both appropriate and beneficial: - Properly marks device deferred probe status, - Avoids dmesg flood on probe deferrals, - Already incorporates printing ERR value, - Shows device name (in contrast to pr_err()), - Makes code smaller and simpler. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637306/ Link: https://lore.kernel.org/r/20250214-drm-msm-cleanups-v2-2-1bec50f37dc1@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-31 11:17:47 +0000