summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-11-19drm/amd/display: Adjust stream enable sequenceJoshua Aberback1-2/+3
[Why] We observed an issue where a display would not accept programming of the ignore_MSA_timing_param bit if the stream was blanked. [How] move enable_stream_features from enable_link_dp to core_link_enable_stream, after unblank_stream Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: get tail pipe before aquire free pipeEric Bernstein1-4/+3
[Why] For some complicated blending transition cases, the head pipe of the second stream may end up being a higher pipe index than the free pipe. In those cases dc_add_plane_to_context will incorrectly set the tail_pipe to the free pipe, which will cause the top_pipe and bottom_pipe to be the same [How] Move the call to resource_get_tail_pipe_for_stream() to be before call to acquire_free_pipe_for_stream(). Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: retry 3 times before successfully readingXiaodong Yan1-3/+14
DPCD Extended Receiver Capability Field [Why] 1.dpcd extended receiver capability sometimes read fail, and corrupted data leads to sink caps is not correct. 2.sometimes sink reply ack with fewer data [How] check the return value of core_link_read_dpcd, try to read again when failure happens Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: 3.2.06Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: redesign scaling rotation mathDmytro Laktyushkin1-414/+240
Change the math to work in viewport rotation when calculating viewport and viewport adjustment. This simplifies the math for viewport calculation and makes viewport adjustment easier to understand. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: clear underflow on optc unblankJun Lei1-10/+9
[why] Underflow is asserted due to some timing condition which does not actually result in visible underflow (i.e. it occurs while blanked). [how] Force clear underflow occured bit whenver we unblank. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Consolidate two-pixels-per-container checkNikola Cornij2-2/+9
[why] The condition to check for two pixels per containter has become rather long and is used in number of places. [how] Move the check to a helper function. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: calculate stream->phy_pix_clk before clock mappingYogesh Mohan Marimuthu1-0/+2
[why] phy_pix_clk is one of the variable used to check if one PLL can be shared with displays having common mode set configuration. As of now phy_pix_clock varialbe is calculated in function dc_validate_stream(). dc_validate_stream() function is called after clocks are assigned for the new display. Due to this during hotplug, when PLL sharing conditions are checked for new display phy_pix_clk variable will be 0 and for displays that are already enabled phy_pix_clk will have some value. Hence PLL will not be shared and if the display hardware doesn't have any more PLL to assign, mode set will fail due to resource unavailability. [how] Instead of only calculating the phy_pix_clk variable after the PLL is assigned for new display, this patch calculates phy_pix_clk also during the before assigning the PLL for new display. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Typo for return check value.Yongqiang Sun1-1/+1
[Why] Typo for return check value. [How] Correct one should be "return enable ? true : false;" Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Clean up dp_blank functionsDavid Francis2-16/+10
[Why] Unused variable "refresh" and incorrect comment formatting [How] Remove variable, reindent comments Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Check for dmcu initialization before calling dmcuDavid Francis2-5/+8
[Why] DMCU firmware is not required - the system is expected to run fine without it. Therefore, wherever dmcu functions could be called, dmcu initialization shoudl be checked [How] Use the helpful hook dmcu_funcs->is_dmcu_initialized Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: fix gamma not being applied correctlyMurton Liu1-1/+2
[why] Gamma was always being set as identity on SDR monitor, leading to no changes in gamma. This caused nightlight to not apply correctly. [how] Added a default gamma structure to compare against in the sdr case. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: make underflow status clear explicitJun Lei7-6/+70
[why] HUBP underflow is never cleared, which causes underflow in one test to fail another test, violating the independence requirements [how] Rather than make clearing implicit, we explicitly clear underflow status in DTN. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: expose dentist_get_divider_from_didNevenko Stupar2-1/+3
expose this functions for future use. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: resolve minor log problemsWenjing Liu1-3/+3
[Why] dc_add_stream_to_context is used to check bw requirement. It is not an error if it fails. [How] Replace DC_ERROR with DC_LOG_WARNING. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Remove dc_stream_state->statusDavid Francis5-7/+3
[Why] dc_state has an array of dc_stream_status that contain pointers to the dc_plane_state and other useful information Confusingly, dc_stream_state also contains a dc_stream_status called status. This struct was partially initialized and used in a few places [How] stream->status.link has been replaced with stream->sink->link. If a stream does not have a sink, or a sink does not have a link, something has gone seriously wrong All other properties of stream->status were zeroed by kzalloc and never initialized, so they have been replaced by the number 0 This is a refactor: no functional change is intended Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: 3.2.05Steven Chiu1-1/+1
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie196-5318/+5538
into drm-next New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie171-3318/+6245
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-16Merge tag 'drm-intel-fixes-2018-11-15' of ↵Dave Airlie9-80/+208
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix Bugzilla #108712: Fix incorrect EU count report from kernel - Fix to account for scale factor when calculating initial phase on scaled output - Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems. - Relocation race fix for Gen4/5 - A couple ICL fixes and dependencies for above Fixes:. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
2018-11-16Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie5-31/+33
into drm-fixes Fixes for 4.20: - Fix for huge page handling that caused a GPUVM fault in some cases - Fix IH ring setup - Fix for xgmi aperture setup - Fix for watermark setup for SMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com
2018-11-16Merge tag 'drm-misc-fixes-2018-11-14' of ↵Dave Airlie9-82/+48
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Cross-subsystem: - omap: Instantiate dss children in omapdss instead of mach (Laurent) Other: - htmldocs build warning (Sean) - MST NULL deref fix (Stanislav) - omap: Various runtime ref gets on probe/bind (Laurent) - omap: Fix to the above dss children patch (Tony) Cc: Sean Paul <sean@poorly.run> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay
2018-11-15drm/i915: Account for scale factor when calculating initial phaseVille Syrjälä3-10/+57
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Clean up skl_program_scaler()Ville Syrjälä1-12/+5
Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-15drm/i915: Move programming plane scaler to its own function.Maarten Lankhorst1-38/+52
This cleans the code up slightly, and will make other changes easier. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com (cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14drm/i915/icl: Drop spurious register read from icl_dbuf_slices_updateMika Kuoppala1-3/+1
Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com (cherry picked from commit 8577c319b6511fbc391f3775225fecd8b979bc26) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14drm/i915: fix broadwell EU computationLionel Landwerlin1-1/+1
subslice_mask is an array indexed by slice, not subslice. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 8cc7669355136f ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com (cherry picked from commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-13drm/amdgpu: fix huge page handling on Vega10Christian König1-8/+10
We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/amd/pp: Fix truncated clock value when set watermarkRex Zhu1-16/+16
the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/amdgpu: fix bug with IH ring setupPhilip Yang1-1/+1
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-13drm/meson: venc: dmt mode must use encpJorge Ramirez-Ortiz1-7/+8
The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542048069-22603-1-git-send-email-jramirez@baylibre.com
2018-11-12drm/amdgpu: set system aperture to cover whole FB regionshaoyunl2-6/+6
In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-12drm/amdgpu: log smu versionShirish S1-0/+4
This patch prints the version of SMU firmware. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-12drm/amdgpu: refactor smu8_send_msg_to_smc and WARN_ON time outDaniel Kurtz1-24/+21
This patch refactors smu8_send_msg_to_smc_with_parameter() to include smu8_send_msg_to_smc_async() so that all the messages sent to SMU can be profiled and appropriately reported if they fail. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-12drm/i915: Fix hpd handling for pins with two encodersVille Syrjälä1-19/+47
In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: stable@vger.kernel.org # 4.19+ Cc: Lyude Paul <lyude@redhat.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> (cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/i915/execlists: Force write serialisation into context image vs executionChris Wilson1-1/+13
Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/i915/icl: Fix power well 2 wrt. DC-off toggling orderImre Deak1-6/+6
To enable DC5/6 power well 2 has to be disabled as for previous platforms, so fix things up. Bspec: 4234 Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com (cherry picked from commit a33e1ece777996ddddb1f23a30f8c66422ed0b68) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MSTLyude Paul1-1/+3
Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com (cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/i915: Fix possible race in intel_dp_add_mst_connector()Lyude Paul1-4/+4
This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com (cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5Chris Wilson1-2/+36
Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk (cherry picked from commit 55f99bf2a9c331838c981694bc872cd1ec4070b2) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-12drm/omap: dsi: Fix missing of_platform_depopulate()Tony Lindgren1-2/+6
We're missing a call to of_platform_depopulate() on errors for dsi. Looks like dss is already doing this. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com
2018-11-12drm/omap: Move DISPC runtime PM handling to omapdrmLaurent Pinchart5-68/+6
The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers attempt to manage the runtime PM state of the connected DISPC, based on the rationale that the DISPC providing data to the encoders requires ensuring that the display is active whenever the encoders are active. While the DISPC provides data to the encoders, it doesn't as such constitute a resource that encoders require in order to be taken out of suspend, contrary to for instance a functional clock or a power supply. Encoders registers can be accessed without the DISPC being active, and while the encoders will not output any video stream without being fed by the DISPC, the DISPC PM state doesn't influence the encoders PM state. For this reason the DISPC PM state is better managed from the omapdrm driver, in the CRTC enable and disable operations. This allows the encoders PM state to be handled separately from the DISPC, and in particular at times when the DISPC may not be available (for instance at probe due to the DSS probe being deferred, or at remove time du to the DISPC being already removed). Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com
2018-11-12drm/omap: dsi: Ensure the device is active during probeLaurent Pinchart1-2/+5
The probe function performs hardware access to read the number of supported data lanes from a configuration register and thus requires the device to be active. Ensure this by surrounding the access with dsi_runtime_get() and dsi_runtime_put() calls. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com
2018-11-12drm/omap: hdmi4: Ensure the device is active during bindLaurent Pinchart1-1/+9
The bind function performs hardware access (in hdmi4_cec_init()) and thus requires the device to be active. Ensure this by surrounding the bind function by hdmi_runtime_get() and hdmi_runtime_put() calls. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-3-laurent.pinchart@ideasonboard.com
2018-11-12drm/omap: Populate DSS children in omapdss driverLaurent Pinchart1-1/+10
The DSS DT node contains children that describe the DSS components (DISPC and internal encoders). Each of those components is handled by a platform driver, and thus needs to be backed by a platform device. The corresponding platform devices are created in mach-omap2 code by a call to of_platform_populate(). While this approach has worked so far, it doesn't model the hardware architecture very well, as it creates child devices before the parent is ready to handle them. This would be akin to creating I2C slaves before the I2C master is available. The task can be easily performed in the omapdss driver code instead, simplifying mach-omap2 code. We however can't remove the mach-omap2 code completely as the omap2fb driver still depends on it, but we can move it to the omap2fb-specific section, where it can stay until the omap2fb driver gets removed. This has the added benefit of not allowing DSS components to probe before the DSS itself, which led to runtime PM issues when the DSS probe is deferred. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com
2018-11-10Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds42-288/+249
Pull drm fixes from Dave Airlie: "drm: i915, amdgpu, sun4i, exynos and etnaviv fixes: - amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios interaction fix. - sun4i has some NULL checks added - i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock fixes. - Exynos has a 3 regression fixes (one frame counter, fbdev missing, dsi->panel check) - Etnaviv has a single fencing fix for GPU recovery" * tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() drm/amd/display: Drop reusing drm connector for MST drm/amd/display: Cleanup MST non-atomic code workaround drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled drm/amd/powerplay: set a default fclk/gfxclk ratio drm/amdgpu/display/dce11: only enable FBC when selected drm/amdgpu/display/dm: handle FBC dc feature parameter drm/amdgpu/display/dc: add FBC to dc_config drm/amdgpu: add DC feature mask module parameter drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) drm/amdgpu/vega20: add CLK base offset drm/amd/display: Stop leaking planes drm/amd/display: Fix misleading buffer information Revert "drm/amd/display: set backlight level limit to 1" drm/amd: Update atom_smu_info_v3_3 structure drm/i915: Fix ilk+ watermarks when disabling pipes drm/sun4i: tcon: prevent tcon->panel dereference if NULL drm/sun4i: tcon: fix check of tcon->panel null pointer drm/i915: Don't oops during modeset shutdown after lpe audio deinit drm/i915: Mark pin flags as u64 ...
2018-11-11Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie16-121/+84
into drm-fixes Fixes for 4.20: - DC MST fixes - DC FBC fix - Vega20 updates to support the latest vbios - KFD type fixes for ioctl headers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108035551.2904-1-alexander.deucher@amd.com
2018-11-11Merge tag 'drm-misc-fixes-2018-11-07' of ↵Dave Airlie3-6/+7
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - sun4i: tcon->panel NULL deref protections (Giulio) Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205051.GA27823@art_vandelay
2018-11-11Merge tag 'drm-intel-fixes-2018-11-08' of ↵Dave Airlie17-135/+145
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x Avoid OOPS on LPE audio deinit. Remove two unused W/As. Fix to correct HDMI 2.0 audio clock modes to spec. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108134508.GA28466@jlahtine-desk.ger.corp.intel.com
2018-11-09drm/amdgpu/gfx9: rework lbpw enable codeAlex Deucher1-17/+12
To avoid changing the global lbpw module parameter directly. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-15 09:10:56 +0000