| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 723aa55c08c9d1e0734e39a815fd41272eac8269 ]
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
[ Upstream commit fe0fb58325e519008e2606a5aa2cff7ad23e212d ]
The line
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
in top-level HID Makefile is both superfluous (as CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
depends on CONFIG_INTEL_ISH_HID, which contains intel-ish-hid/ already) and wrong (as it's
missing the CONFIG_ prefix).
Just remove it.
Fixes: 91b228107da3e ("HID: intel-ish-hid: ISH firmware loader client driver")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9821709af892be9fbf4ee9a50b2f3e0604295ce0 upstream.
Add mapping for headset mute key events.
Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic.
The quirk logic did not keep track of the actual previous key
so any key event occurring in less than or equal to 5ms was ignored.
Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk.
It had the same logic issue as the double key quirk and was actually
masking the as designed behavior of most of the headsets.
It's occurrence should be minimized with the ALSA control naming
quirk that is part of the patch set.
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 221cea1003d8a412e5ec64a58df7ab19b654f490 upstream.
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 819083cb6eedcc8495cbf84845877bcc741b93b3 ]
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2813e00dcd748cef47d2bffaa04071de93fddf00 ]
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9271af9d846c7e49c8709b58d5853cb73c00b193 ]
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18c966b62819b9d3b99eac8fb8cdc8950826e0c2 ]
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05c4ede6951b5d8e083b6bb237950cac59bdeb92 ]
When lizard mode is disabled, there were two issues:
1. Switching between gamepad mode and desktop mode still functioned, even
though desktop mode did not. This lead to the ability to "break" gamepad mode
by holding down the Options key even while lizard mode is disabled
2. If you were in desktop mode when lizard mode is disabled, you would
immediately enter this faulty mode.
This patch properly disables the ability to switch between gamepad mode and the
faulty desktop mode by holding the Options key, as well as effectively removing
the faulty mode by bypassing the early returns if lizard mode is disabled.
Reported-by: Eugeny Shcheglov <eugenyshcheglov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 363236d709e75610b628c2a4337ccbe42e454b6d ]
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e0d1cff12b895f44f4ddc8cf50311bc1f775201 ]
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b54ae69197b9f416baa0fceadff7e89075f8454 ]
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e53fc232a65f7488ab75d03a5b95f06aaada7262 ]
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07583a0010696a17fb0942e0b499a62785c5fc9f ]
The system can experience a random crash a few minutes after the driver is
removed. This issue occurs due to improper handling of memory freeing in
the ishtp_hid_remove() function.
The function currently frees the `driver_data` directly within the loop
that destroys the HID devices, which can lead to accessing freed memory.
Specifically, `hid_destroy_device()` uses `driver_data` when it calls
`hid_ishtp_set_feature()` to power off the sensor, so freeing
`driver_data` beforehand can result in accessing invalid memory.
This patch resolves the issue by storing the `driver_data` in a temporary
variable before calling `hid_destroy_device()`, and then freeing the
`driver_data` after the device is destroyed.
Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 823987841424289339fdb4ba90e6d2c3792836db ]
During the `rmmod` operation for the `intel_ishtp_hid` driver, a
use-after-free issue can occur in the hid_ishtp_cl_remove() function.
The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(),
which can lead to accessing freed memory or resources during the
removal process.
Call Trace:
? ishtp_cl_send+0x168/0x220 [intel_ishtp]
? hid_output_report+0xe3/0x150 [hid]
hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid]
ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid]
hid_hw_request+0x1f/0x40 [hid]
sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub]
_hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger]
hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger]
sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub]
hid_device_remove+0x49/0xb0 [hid]
hid_destroy_device+0x6f/0x90 [hid]
ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid]
hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid]
ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp]
...
Additionally, ishtp_hid_remove() is a HID level power off, which should
occur before the ISHTP level disconnect.
This patch resolves the issue by reordering the calls in
hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now
called before hid_ishtp_cl_deinit().
Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4bd0725c09f377ffaf22b834241f6c050742e4fc ]
As reported by the kernel test robot, the following warning occurs:
>> drivers/hid/hid-google-hammer.c:261:36: warning: 'cbas_ec_acpi_ids' defined but not used [-Wunused-const-variable=]
261 | static const struct acpi_device_id cbas_ec_acpi_ids[] = {
| ^~~~~~~~~~~~~~~~
The 'cbas_ec_acpi_ids' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Fixes: eb1aac4c8744f75 ("HID: google: add support tablet mode switch for Whiskers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201141.jctFH5eB-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0c28e4d1e10d2aae608094620bb386e6fd73d55e upstream.
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1236843
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ff5baa9b5275e3acafdf7f2089f74cccb2f38d1 upstream.
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 79504249d7e27cad4a3eeb9afc6386e418728ce0 ]
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc4f952427aaa44ecfd92542e10a65cce67bd6f4 ]
When a force feedback command is sent from userspace, work is scheduled to pass
this data to the controller without blocking userspace itself. However, in
theory, this work might not be properly canceled if the controller is removed
at the exact right time. This patch ensures the work is properly canceled when
the device is removed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b051ffa2aeb2a60e092387b6fb2af1ad42f51a3c ]
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b43d98ff29be3144e86294486b1373b5df74c0e ]
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b8e2220d3a052a690b1d1b23019673e612494c5 ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45ab5166a82d038c898985b0ad43ead69c1f9573 ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 48e487b002891eb0aeaec704c9bed51f028deff1 upstream.
The cancel_delayed_work_sync() call was missed, causing a use-after-free
in corsair_void_remove().
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/all/SY8P300MB042106286A2536707D2FB736A1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Closes: https://lore.kernel.org/all/SY8P300MB0421872E0AE934C9616FA61EA1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c098363828f7006ef5c5121b673bc5e26571e6c8 upstream.
power_supply_config psy_cfg was missing its initialiser, add it in.
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a5b38c3fd709e8acd2bfdedf66c25e6af759576 upstream.
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 53078a736fbc60e5d3a1e14f4cd4214003815026 ]
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4c123504a65583e3689b3de04a61dc5272e453a ]
Add PCI device ID of wacom device into driver support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5e65ae557da9fd17b08482ee44ee108ba636182 ]
This device sometimes doesn't send touch release signals when moving
from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
Signed-off-by: Enze Xie <enze@nfschina.com>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Collections
commit 64f2657b579343cf923aa933f08074e6258eb07b upstream.
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection.
Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 5a4abb36f312 ("HID: core: process the Resolution Multiplier")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 80818fdc068eaab729bb793d790ae9fd053f7053 ]
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
check
[ Upstream commit 50420d7c79c37a3efe4010ff9b1bb14bc61ebccf ]
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the hid-thrustmaster driver[1].
There is a number of similar, already fixed issues [2].
In this case as in others, implementing check for endpoint type fixes the issue.
[1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470
[2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622
Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Tested-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ade5e05bd094485ce370fad66a6a3fb6f50bfbc ]
Commit c8000deb68365b ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68365b ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 88006b8eca63467cf1b28fed839f4954c578eeff upstream.
If an LED has a default_trigger set prior to being registered with
the subsystem, that trigger will be executed with a brightness value
defined by `trigger->brightness`. Our driver was not setting this
value, which was causing problems. It would cause the selected LED
to be turned off, as well as corrupt the hlv/llv values assigned to
other LEDs (since calling `wacom_led_brightness_set` will overite
these values).
This patch sets the value of `trigger->brightness` to an appropriate
value. We use `wacom_leds_brightness_get` to transform the llv/hlv
values into a brightness that is understood by the rest of the LED
subsystem.
Fixes: 822c91e72eac ("leds: trigger: Store brightness set by led_trigger_event()")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d88ba86ba6f35a0467f25a88c38aa5639190d04 upstream.
This reverts commit 251efae73bd46b097deec4f9986d926813aed744.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 33c0fb85b571 ("HID: bpf: make part of struct hid_device writable")
the const qualifier was dropped from struct hid_bpf_ctx::hid.
The casts are now unnecessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241127-hid-bpf-cast-v1-1-f26424960e84@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The hid_ops struct is never modified. Mark it as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241127-hid-bpf-ops-v1-1-f9e41bfa3afd@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Due to incorrect dev->product reporting by certain devices, null
pointer dereferences occur when dev->product is empty, leading to
potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with
Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 56.671638] usb 4-3: string descriptor 0 read error: -22
[ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07
[ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0
[ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80
[ 56.697732] Oops[#1]:
[ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015
[ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024
[ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0
[ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000
[ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000
[ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005
[ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000
[ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028
[ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000
[ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000
[ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom]
[ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120
[ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE)
[ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
[ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 56.697835] BADV: 0000000000000000
[ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit
[ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3)
[ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000
[ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000
[ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0
[ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c
[ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440
[ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0
[ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c
[ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000
[ 56.697931] 90000001000bb8d0 9000000006307564 9000000005e666e0 90000001752359b8
[ 56.697936] 9000000008cbe400 900000000804d000 9000000005e666e0 0000000000000000
[ 56.697941] ...
[ 56.697944] Call Trace:
[ 56.697945] [<90000000066e35c8>] strstr+0x28/0x120
[ 56.697950] [<ffff800004f98a80>] wacom_update_name+0xe0/0x300 [wacom]
[ 56.698000] [<ffff800004f9ce58>] wacom_parse_and_register+0x338/0x900 [wacom]
[ 56.698050] [<ffff800004f9d74c>] wacom_probe+0x32c/0x420 [wacom]
[ 56.698099] [<9000000006307564>] hid_device_probe+0x144/0x260
[ 56.698103] [<9000000005e65d68>] really_probe+0x208/0x540
[ 56.698109] [<9000000005e661dc>] __driver_probe_device+0x13c/0x1e0
[ 56.698112] [<9000000005e66620>] driver_probe_device+0x40/0x100
[ 56.698116] [<9000000005e6680c>] __device_attach_driver+0x12c/0x180
[ 56.698119] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160
[ 56.698123] [<9000000005e66468>] __device_attach+0x108/0x260
[ 56.698126] [<9000000005e63918>] device_reprobe+0x78/0x100
[ 56.698129] [<9000000005e62a68>] bus_for_each_dev+0x88/0x160
[ 56.698132] [<9000000006304e54>] __hid_bus_driver_added+0x34/0x80
[ 56.698134] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160
[ 56.698137] [<9000000006304df0>] __hid_register_driver+0x70/0xa0
[ 56.698142] [<9000000004e10fe4>] do_one_initcall+0x104/0x320
[ 56.698146] [<9000000004f38150>] do_init_module+0x90/0x2c0
[ 56.698151] [<9000000004f3a3d8>] init_module_from_file+0xb8/0x120
[ 56.698155] [<9000000004f3a590>] idempotent_init_module+0x150/0x3a0
[ 56.698159] [<9000000004f3a890>] sys_finit_module+0xb0/0x140
[ 56.698163] [<900000000671e4e8>] do_syscall+0x88/0xc0
[ 56.698166] [<9000000004e12404>] handle_syscall+0xc4/0x160
[ 56.698171] Code: 0011958f 00150224 5800cd85 <2a00022c> 00150004 4000c180 0015022c 03400000 03400000
[ 56.698192] ---[ end trace 0000000000000000 ]---
Fixes: 09dc28acaec7 ("HID: wacom: Improve generic name generation")
Reported-by: Zhenxing Chen <chenzhenxing@uniontech.com>
Co-developed-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://patch.msgid.link/B31757FE8E1544CF+20241125052616.18261-1-wangyuli@uniontech.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
commit 7d6f065de37c ("HID: i2c-hid: Use address probe to wake on resume")
replaced the retry of power commands with the dummy read "bus probe" we
use on boot which accounts for a necessary delay before retry.
This made at least one Weida device (2575:0910 in an ASUS Vivobook S14)
very unhappy, as the bus probe despite being successful somehow lead to
the following power command failing so hard that the device never lets
go of the bus. This means that even retries of the power command would
fail on a timeout as the bus remains busy.
Remove the bus probe on resume and instead reintroduce retry of the
power command for wake-up purposes while respecting the newly
established wake-up retry timings.
Fixes: 7d6f065de37c ("HID: i2c-hid: Use address probe to wake on resume")
Cc: stable@vger.kernel.org
Reported-by: Michael <auslands-kv@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219440
Link: https://lore.kernel.org/r/d5acb485-7377-4139-826d-4df04d21b5ed@leemhuis.info/
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://patch.msgid.link/20241119235615.23902-1-kl@kl.wtf
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This reverts commit 6fd47effe92b, and the related self-test update
commit e14e0eaeb040 ("selftests/hid: add test for assigning a given
device to hid-generic").
It results in things like the scroll wheel on Logitech mice not working
after a reboot due to the kernel being confused about the state of the
high-resolution mode.
Quoting Benjamin Tissoires:
"The idea of 6fd47effe92b was to be able to call hid_bpf_rdesc_fixup()
once per reprobe of the device.
However, because the bpf filter can now change the quirk value, the
call had to be moved before the driver gets bound (which was
previously ensuring the unicity of the call).
The net effect is that now, in the case hid-generic gets loaded first
and then the specific driver gets loaded once the disk is available,
the value of ->quirks is not reset, but kept to the value that was set
by hid-generic (HID_QUIRK_INPUT_PER_APP).
Once hid-logitech-hidpp kicks in, that quirk is now set, which creates
two inputs for the single mouse: one keyboard for fancy shortcuts, and
one mouse node.
However, hid-logitech-hidpp expects only one input node to be attached
(it stores it into hidpp->input), and when a wheel event is received,
because there is some processing with high-resolution wheel events,
the wheel event is injected into hidpp->input.
And of course, when HID_QUIRK_INPUT_PER_APP is set, hidpp->input gets
the keyboard node, which doesn't have wheel event type, and the events
are ignored"
Reported-and-bisected-by: Mike Galbraith <efault@gmx.de>
Link: https://lore.kernel.org/all/CAHk-=wiUkQM3uheit2cNM0Y0OOY5qqspJgC8LkmOkJ2p2LDxcw@mail.gmail.com/
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang)
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
- support for Corsair Void headset family (Stuart Hayhurst)
|
|
- Support for Goodix GT7986U SPI (Charles Wang)
- assorted code cleanups and fixes (Charles Wang)
|
