| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
to set default brightness
This commit makes use of appletb_bl_brightness_map instead of using if
statements and magic numbers to set default brightness, and thus simplifies
the code.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit addresses the sparse warning flagged by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502091105.ZsLoBSIh-lkp@intel.com/
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Without entries in the hid_have_special_driver table, PS5 controllers
default to the hidraw driver instead of the hid-playstation driver.
Signed-off-by: Alex Henrie <dhenrale@amazon.com>
Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
PlayStation 4 controllers use the hid-playstation driver now, but they
are still not included in the hid_have_special_driver table unless the
hid-sony driver is enabled. Split up that section of the table so that
hid-playstation works even in the absence of hid-sony.
Fixes: 4f1f391869ee ("HID: sony: remove DualShock4 support.")
Signed-off-by: Alex Henrie <dhenrale@amazon.com>
Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
For main items, separate warning of reserved item tag from
warning of unknown item tag.
This comes from 6.2.2.4 Main Items of Device Class Definition
for HID 1.11 specification.
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Both branches of this if/else start with mutex_lock and end with mutex_unlock.
This hoists the mutex lock/unlock outside of the if statement for simplicity.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
using the touchbar
On Windows, if there is no input by the user for 60 sec, the Touch Bar dims
automatically, and after further 15 sec, it turns off. On receiving input,
the Touch Bar resets the timer and goes back to full brightness. This patch
implements the same functionality.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds support for the switching between the Media and Function
keys on the touchbar by pressing the Fn key on Apple Internal Keyboard.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed. This commit adds a driver for the
display functionality of the first configuration.
Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<ronald@innovation.ch>.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds a driver for the backlight of Apple Touch Bars on x86
Macs. Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<ronald@innovation.ch>.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Replace the custom "color" sysfs attribute with the standard multicolor
LED API.
This also removes the code for the custom "color" sysfs attribute,
the "color" sysfs attribute was never documented so hopefully, it is not
used by anyone.
If we get complaints, we can re-add the "color" sysfs attribute as
a compatibility wrapper setting the subleds intensity.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
intel-thc-hid reintroduced the already deprecated PCI API functions
pcim_iomap_table(),
pcim_iomap_regions(),
pcim_iounmap_regions(),
none of which should be used anymore.
Furthermore, calling managed (pcim_*) functions in remove() and probe()
for cleanup is not necessary, since the managed functions clean up
automatically.
Replace / remove the deprecated functions.
Fixes: 61bb2714dc3a1 ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since "LED_KANA" was defined as "0x04", the shift number should be "4".
Signed-off-by: junan <junan76@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We only want to refetch the pool report during device init. Reset
function is now called when uploading effects to an empty device so
extract pool fetch to separate function and call it from init before
autocenter check (autocenter check triggered reset during init).
Remove a superfluous pointer declaration and assigment as well.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Makes it obvious these magic values ARE in fact derived from min and
max values for s16 and u16
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This function overrelies on ternary operators and makes it hard to parse
it mentally. New version makes it very easy to understand.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Do not clutter hid includes with stuff not needed outside of
the kernel.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This function triggered a null pointer dereference if used to search for
a report that isn't implemented on the device. This happened both for
optional and required reports alike.
The same logic was applied to pidff_find_special_field and although
pidff_init_fields should return an error earlier if one of the required
reports is missing, future modifications could change this logic and
resurface this possible null pointer dereference again.
LKML bug report:
https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.com
Reported-by: Nolan Nicholson <nolananicholson@gmail.com>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Makes it possible to easily set gain from inside hid-pidff.c
Changes in v7:
- Check if device gain field exists before setting device gain
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
PID devices can use different exponents for time fields, while Linux
Force Feedback API only supports miliseconds.
Read the exponent of a given time field and scale its value accordingly.
Changes in v7:
- Rescale all time fields, not only period
changes in v9:
- Properly assign fade_lenght, not attack_length to PID_FADE_TIME
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Makes it clear where did these values came from
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge a bit of code that reqeusts conditional effects upload.
Makes it clear, that effect handling should be identical for
SPRING, DAMPER, INERTIA and FRICTION.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Previously, it was assumed that DEVICE_CONTROL usage is always an array
but a lot of devices implements it as a bitmask variable. This led to
the pidff_reset function not working and causing errors in such cases.
Selectors can come in three types. One selection of a set, N selections
and Any selection in form of bitmask as from USB Hid Usage Tables v1.5,
subsection 3.4.2.1
Added pidff_send_device_control which handles usage flag check which
decides whether DEVICE_CONTROL should be handled as "One selection of a
set" or "Any selection of a set".
Reset was triggered once, on device initialization. Now, it's triggered
every time when uploading an effect to an empty device (no currently
stored effects), tracked by pidff->effect_count variable.
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Extend pidff compatibility, usable button range, manage pidff quirks and
set improved fuzz/flat default for high precision devices. Possibility
of fixing device descriptors in the future if such needs arises.
As many of PID devices are quite similar and not dependent on
custom drivers, this one can handle all of PID devices which
need special care.
Numerous sim racing/sim flight bases report a lot of buttons
in excess of 100. Moza Racing exposes 128 of them and thus
the need to extend the available range.
All the included devices were tested and confirmed working
with the help of the sim racing community.
Changes in v6:
- Support "split" devices with a separate "input device" for buttons
- Fixed comment styling
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some PID compliant devices automatically play effects after boot (i.e.
autocenter spring) that prevent the rendering of other effects since
it is done outside the kernel driver.
This makes sure all the effects currently played are stopped after
resetting the device.
It brings compatibility to the Brunner CLS-P joystick and others
Reported-by: Jules Noirant <jules.noirant@orange.fr>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This ensures the effect can actually be played on the connected force
feedback device. Adds clamping functions used instead of rescaling, as we
don't want to change the characteristics of the periodic effects.
Fixes edge cases found on Moza Racing and some other hardware where
the effects would not play if the period is outside the defined
logical range.
Changes in v6:
- Use in-kernel clamp macro instead of a custom solution
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Envelope struct is always initialized, but the envelope itself is
optional as described in USB PID Device class definition 1.0.
5.1.1.1 Type Specific Block Offsets
...
4) Effects that do not use Condition Blocks use 1 Parameter Block and
an *optional* Envelope Block.
Sending out "empty" envelope breaks force feedback on some devices with
games that use SINE effect + offset to emulate constant force effect, as
well as generally breaking Constant/Periodic effects. One of the affected
brands is Moza Racing.
This change prevents the envelope from being sent if it contains all
0 values while keeping the old behavior of only sending it, if it differs
from the old one.
Changes in v6:
- Simplify the checks to make them clearer
- Fix possible null pointer dereference while calling
pidff_needs_set_envelope
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Software uses 0 as de-facto infinite lenght on Linux FF apis (SDL),
Linux doesn't actually define anythi as of now, while USB PID defines
NULL (0xffff). Most PID devices do not expect a 0-length effect and
can't interpret it as infinite. This change fixes Force Feedback for
most PID compliant devices.
As most games depend on updating the values of already playing infinite
effects, this is crucial to ensure they will actually work.
Previously, users had to rely on third-party software to do this conversion
and make their PID devices usable.
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When lizard mode is disabled, there were two issues:
1. Switching between gamepad mode and desktop mode still functioned, even
though desktop mode did not. This lead to the ability to "break" gamepad mode
by holding down the Options key even while lizard mode is disabled
2. If you were in desktop mode when lizard mode is disabled, you would
immediately enter this faulty mode.
This patch properly disables the ability to switch between gamepad mode and the
faulty desktop mode by holding the Options key, as well as effectively removing
the faulty mode by bypassing the early returns if lizard mode is disabled.
Reported-by: Eugeny Shcheglov <eugenyshcheglov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add mapping for headset mute key events.
Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic.
The quirk logic did not keep track of the actual previous key
so any key event occurring in less than or equal to 5ms was ignored.
Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk.
It had the same logic issue as the double key quirk and was actually
masking the as designed behavior of most of the headsets.
It's occurrence should be minimized with the ALSA control naming
quirk that is part of the patch set.
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c29 ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
A previous patch tried to fix this link failure:
x86_64-linux-ld: drivers/hid/hid-lenovo.o: in function `lenovo_raw_event':
hid-lenovo.c:(.text+0x22c): undefined reference to `platform_profile_cycle'
but got it wrong in three ways:
- the link failure still exists with CONFIG_ACPI_PLATFORM_PROFILE=m
when hid-lenovo is built-in
- There is no way to manually enable CONFIG_ACPI_PLATFORM_PROFILE, as
it is intended to be selected by its users.
Remove the broken #if check again and instead select the symbol like
the other users do. This requires adding a dependency on CONFIG_ACPI.
Fixes: 52e7d1f7c2fd ("HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
