summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-05i2c: tegra: Check errors for both positive and negative valuesDmitry Osipenko1-3/+3
The driver's code is inconsistent in regards to the error values checking. The correct way should be to check both positive and negative values. This patch cleans up the error-checks in the code. Note that the pm_runtime_get_sync() could return positive value on success, hence only relevant parts of the code are changed by this patch. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out hardware initialization into separate functionDmitry Osipenko1-13/+19
Factor out hardware initialization into a separate function from the probe function. The only place where runtime PM needs to be resumed during probe is the place of hardware initialization, hence it makes sense to factor out it in order to have a bit cleaner error handling in tegra_i2c_probe(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out register polling into separate functionDmitry Osipenko1-32/+25
Factor out register polling into a separate function in order to remove boilerplate code and make code cleaner. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()Dmitry Osipenko1-40/+55
The code related to packet header setting up is a bit messy and makes tegra_i2c_xfer_msg() more difficult to read than it could be. Let's factor the packet header setup from tegra_i2c_xfer_msg() into separate function in order to make code easier to read and follow. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()Dmitry Osipenko1-16/+30
Factor out error recovery code from tegra_i2c_xfer_msg() in order to make this function easier to read and follow. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Rename wait/poll functionsDmitry Osipenko1-18/+14
Drop '_timeout' postfix from the wait/poll completion function names in order to make the names shorter, making code cleaner a tad. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()Dmitry Osipenko1-9/+8
The "dma" variable of tegra_i2c_xfer_msg() function doesn't bring much in regards to readability and generation of the code. Besides readability, it's also not very nice that the is_curr_dma_xfer is initialized in tegra_i2c_xfer_msg() and then could be overridden by tegra_i2c_config_fifo_trig(). In a result, the "dma" variable creates slight confusion since it's not instantly obvious why it's set after tegra_i2c_config_fifo_trig(). Hence should be better to have the variable removed. This makes code more consistent. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()Dmitry Osipenko1-5/+4
The tegra_i2c_wait_for_config_load() checks for 'has_config_load_reg' by itself, hence there is no need to duplicate the check. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove likely/unlikely from the codeDmitry Osipenko1-2/+2
The likely/unlikely annotations should be used only in a hot paths of performance-critical code. The I2C driver doesn't have such paths, and thus, there is no justification for usage of likely/unlikely annotations in the code. Hence remove them. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove outdated barrier()Dmitry Osipenko1-8/+5
The barrier() was intended to reduce possibility of racing with the interrupt handler, but driver's code evolved significantly and today's driver enables interrupt only when it waits for completion notification. Hence barrier() has no good use anymore, let's remove it. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up variable typesDmitry Osipenko1-19/+19
Don't use signed types for unsigned values and use consistent types for sibling variables. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Reorder location of functions in the codeDmitry Osipenko1-244/+242
Reorder location of functions in the code in order to have definition of functions closer to the place of the invocation. This change makes easier to navigate around the code and removes the need to have a prototype for tegra_i2c_init(). Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up probe functionDmitry Osipenko1-51/+49
The driver's probe function code is a bit difficult to read. This patch reorders code of the probe function, forming groups of code that are easy to work with. The probe tear-down order now matches the driver-removal order. Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()Dmitry Osipenko1-4/+6
Move out code related to device-tree parsing from the probe function into tegra_i2c_parse_dt() in order to make code more consistent. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Use clk-bulk helpersDmitry Osipenko1-120/+68
Use clk-bulk helpers and factor out clocks initialization into separate function in order to make code cleaner. The clocks initialization now performed after reset-control initialization in order to avoid a noisy -PROBE_DEFER errors on T186+ from the clk-bulk helper which doesn't silence this error code. Hence reset_control_get() now may return -EPROBE_DEFER on newer Tegra SoCs because they use BPMP driver that provides reset controls and BPMP doesn't come up early during boot. Previously rst was protected by the clocks retrieval and now this patch makes dev_err_probe() to be used for the rst error handling. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Use platform_get_irq()Dmitry Osipenko1-6/+3
Use common helper for retrieval of the interrupt number in order to make code cleaner. Note that platform_get_irq() prints error message by itself. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Use devm_platform_get_and_ioremap_resource()Dmitry Osipenko1-3/+3
Driver now uses devm_platform_get_and_ioremap_resource() which replaces the typical boilerplate code and makes code cleaner. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Use reset_control_reset()Dmitry Osipenko1-3/+10
Use a single reset_control_reset() instead of assert/deasset couple in order to make code cleaner a tad. Note that the reset_control_reset() uses 1 microsecond delay instead of 2 that was used previously, but this shouldn't matter because one microsecond is a default reset time for most of Tegra peripherals and TRM doesn't mention anything special in regards to I2C controller's reset propagation time. In addition don't ignore potential error of the reset control by emitting a noisy warning if it fails, which will indicate an existence of a severe problem, while still allow machine to boot up. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove error message used for devm_request_irq() failureDmitry Osipenko1-3/+1
The error message prints number of vIRQ, which isn't a useful information. In practice devm_request_irq() never fails, hence let's remove the bogus message in order to make code cleaner. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Runtime PM always available on TegraDmitry Osipenko1-23/+6
The runtime PM is guaranteed to be always available on Tegra after commit 40b2bb1b132a ("ARM: tegra: enforce PM requirement"). Hence let's remove all the RPM-availability checking and handling from the code. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode memberDmitry Osipenko1-25/+21
The "non_hs_mode" divisor value is fixed, thus there is no need to have the variable i2c_dev.clk_divisor_non_hs_mode struct member. Let's remove it and move the mode selection into tegra_i2c_init() where it can be united with the timing selection. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Initialize div-clk rate unconditionallyDmitry Osipenko1-18/+16
It doesn't make sense to conditionalize the div-clk rate changes because rate is fixed and it won't ever change once it's set at the driver's probe time. All further changes are NO-OPs because CCF caches rate and skips rate-change if rate is unchanged. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()Dmitry Osipenko1-0/+2
The tegra_i2c_issue_bus_clear() may fail and in this case BUS_CLR_DONE stays unmasked. Hence let's mask it for consistency. This patch doesn't fix any known problems. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()Dmitry Osipenko1-1/+3
Technically the tegra_i2c_flush_fifos() may fail and transfer should be aborted in this case, but this shouldn't ever happen in practice unless there is a bug somewhere in the driver. Let's add the error check just for completeness. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Add missing pm_runtime_put()Dmitry Osipenko1-2/+2
The pm_runtime_get_sync() always bumps refcount regardless of whether it succeeds or fails. Hence driver is responsible for restoring of the RPM refcounting. This patch adds missing RPM puts which restore refcounting in a case of pm_runtime_get_sync() error. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transferDmitry Osipenko1-9/+16
The tegra_i2c_flush_fifos() shouldn't sleep in atomic transfer and jiffies are not updating if interrupts are disabled. Let's switch to use iopoll API helpers for register-polling. The iopoll API provides helpers for both atomic and non-atomic cases. Note that this patch doesn't fix any known problem because normally FIFO is flushed at the time of starting a new transfer. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-29i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQBarry Song3-9/+6
The code has been in a irq-disabled context since it is hard IRQ. There is no necessity to do it again. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-29i2c: efm32: Use devm_platform_get_and_ioremap_resource()Wang ShaoBo1-9/+3
Make use of devm_platform_get_and_ioremap_resource() provided by driver core platform instead of duplicated analogue. dev_err() is removed because it has been done in devm_ioremap_resource(). Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-29i2c: i801: Add support for Intel Alder Lake PCH-SJarkko Nikula2-0/+5
Add PCI ID of SMBus controller on Intel Alder Lake PCH-S Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27i2c: npcm7xx: Clear LAST bit after a failed transaction.Tali Perry1-0/+9
Due to a HW issue, in some scenarios the LAST bit might remain set. This will cause an unexpected NACK after reading 16 bytes on the next read. Example: if user tries to read from a missing device, get a NACK, then if the next command is a long read ( > 16 bytes), the master will stop reading after 16 bytes. To solve this, if a command fails, check if LAST bit is still set. If it does, reset the module. Fixes: 56a1485b102e (i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver) Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27i2c: imx: Fix external abort on interrupt in exit pathsKrzysztof Kozlowski1-11/+13
If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27i2c: rk3x: Simplify with dev_err_probe()Krzysztof Kozlowski1-12/+7
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoCKhalil Blaiech3-0/+2520
Add BlueField I2C driver to offer master and slave support for Mellanox BlueField SoCs. The driver implements an SMBus adapter and interfaces to multiple busses that can be probed using both ACPI and Device Tree infrastructures. The driver supports several SMBus operations to transfer data back and forth from/to various I2C devices. It is mainly intended to be consumed by userspace tools and utilities, such as i2c-tools and decode-dimms to collect memory module information. On the other hand, the driver has a slave function to support, among others, an IPMB interface that requires both master and slave functions to handle transfers between the BlueField SoC and a board management controllers (e.g., BMC). Signed-off-by: Khalil Blaiech <kblaiech@mellanox.com> Reviewed-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27i2c: cpm: Fix i2c_ram structureNicolas VINCENT1-0/+3
the i2c_ram structure is missing the sdmatmp field mentionned in datasheet for MPC8272 at paragraph 36.5. With this field missing, the hardware would write past the allocated memory done through cpm_muram_alloc for the i2c_ram structure and land in memory allocated for the buffers descriptors corrupting the cbd_bufaddr field. Since this field is only set during setup(), the first i2c transaction would work and the following would send data read from an arbitrary memory location. Fixes: 61045dbe9d8d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers") Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: nvidia-gpu: Use put_unaligned_be24()Andy Shevchenko1-2/+1
This makes the driver code slightly easier to read. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: ismt: Add support for Intel Emmitsburg PCHAndy Shevchenko1-0/+2
Add PCI ID for the Intel Emmitsburg PCH iSMT SMBus controller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Seth Heasley <seth.heasley@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: ismt: Describe parameters in kernel docAndy Shevchenko1-8/+2
Kernel doc validation script complains: CHECK .../drivers/i2c/busses/i2c-ismt.c .../i2c-ismt.c:182: warning: cannot understand function prototype: 'const struct pci_device_id ismt_ids[] = ' .../i2c-ismt.c:202: warning: Function parameter or member 'dev' not described in '__ismt_desc_dump' .../i2c-ismt.c:202: warning: Function parameter or member 'desc' not described in '__ismt_desc_dump' .../i2c-ismt.c:649: warning: cannot understand function prototype: 'const struct i2c_algorithm smbus_algorithm = ' Fix corresponding descriptions to make reader and kernel doc validator happy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Seth Heasley <seth.heasley@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: jz4780: Remove of_match_ptr()Paul Cercueil1-1/+1
CONFIG_OF is selected by CONFIG_MACH_INGENIC, therefore we don't need to handle the case where Device Tree is not supported. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: jz4780: Add compatible string for JZ4770 SoCPaul Cercueil1-0/+1
The I2C controller in the JZ4770 SoC seems to work the exact same as in the JZ4780 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: amd_mp2: handle num is 0 input for i2c_amd_xferTom Rix1-1/+1
clang static analyzer reports this problem i2c-amd-mp2-plat.c:174:9: warning: Branch condition evaluates to a garbage value return err ? err : num; ^~~ err is not initialized, it depends on the being set in the transfer loop which will not happen if num is 0. Surveying other master_xfer() implementations show all handle a 0 num. Because returning 0 is expected, initialize err to 0. Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Elie Morisse <syniurge@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: stm32: Simplify with dev_err_probe()Krzysztof Kozlowski3-17/+13
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: stm32: fix error message on upon dma_request_chan & defer handlingAlain Volmat2-11/+8
DMA usage is optional for the I2C driver. check for the -ENODEV error in order to avoid displaying an error when no DMA has been requested. Cleaning up the error messages during probe, remove the additional -EPROBE_DEFER within probe function since additional error message doesn't give much more information than what is already reported within the stm32_i2c_dma_request function. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: i801: Exclude device from suspend direct complete optimizationJean Delvare1-0/+1
By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: rcar: add HostNotify supportWolfram Sang2-3/+29
The I2C core can now utilize a slave interface to handle SMBus HostNotify events. Enable it in this driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: add slave testunit driverWolfram Sang3-0/+184
Here is an I2C slave backend driver which allows to test some uncommon functionalities of the I2C and SMBus world. Usually, you need specific devices to test e.g. SMBus Host Notify and such. With this driver you just need the slave interface of another I2C controller. This initial version has testcases for multi-master and SMBus Host Notify. Already planned but not yet implemented are SMBus Alert and messages with I2C_M_RECV_LEN. Please read the documentation for further details. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACKMatthias Schiffer1-3/+7
The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"), but i2c-mxs was not updated to use the new flag, completely breaking I2C transactions using DMA. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: stm32: name slave slot to ease maintenanceAlain Volmat1-8/+14
Name slave slots in order to ease code maintenance. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: bcm2835: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mux: reg: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mux: gpmux: Simplify with dev_err_probe()Krzysztof Kozlowski1-10/+6
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 15:41:05 +0000