summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2021-05-19i2c: mediatek: Fix send master code at more than 1MHzQii Wang1-4/+5
commit 63ce8e3df8f6deca2da52eaf064751ad4018b46e upstream. There are some omissions in the previous patch about replacing I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and need to fix it. Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-19i2c: bail out early when RDWR parameters are wrongWolfram Sang1-2/+7
[ Upstream commit 71581562ee36032d2d574a9b23ad4af6d6a64cf7 ] The buggy parameters currently get caught later, but emit a noisy WARN. Userspace should not be able to trigger this, so add similar checks much earlier. Also avoids some unneeded code paths, of course. Apply kernel coding stlye to a comment while here. Reported-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Tested-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: mediatek: Fix wrong dma sync flagQii Wang1-1/+1
[ Upstream commit 3186b880447ad3cc9b6487fa626a71d64b831524 ] The right flag is apdma_sync when apdma remove hand-shake signel. Fixes: 05f6f7271a38 ("i2c: mediatek: Fix apdma and i2c hand-shake timeout") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: sh7760: fix IRQ error pathSergey Shtylyov1-1/+1
[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ] While adding the invalid IRQ check after calling platform_get_irq(), I managed to overlook that the driver has a complex error path in its probe() method, thus a simple *return* couldn't be used. Use a proper *goto* instead! Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: sh7760: add IRQ checkSergey Shtylyov1-1/+4
[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: rcar: add IRQ checkSergey Shtylyov1-1/+4
[ Upstream commit 147178cf03a6dcb337e703d4dacd008683022a58 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: rcar: protect against supurious interrupts on V3UWolfram Sang1-14/+43
[ Upstream commit 9c975c432bc0aa53a90438fc80b369cb35134a48 ] V3U creates spurious interrupts which we need to handle. This costs time until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs and earlier. Because of this we introduce two interrupt handlers here which will call a generic main irq function once the timing critical stuff is done. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: rcar: make sure irq is not threaded on Gen2 and earlierWolfram Sang1-1/+5
[ Upstream commit 24c6d4bc563881539d2cd4433e502436ad87d512 ] Ensure this irq runs as fast as possible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: mlxbf: add IRQ checkSergey Shtylyov1-0/+2
[ Upstream commit 0d3bf53e897dce943b98d975bbde77156af6cd81 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: jz4780: add IRQ checkSergey Shtylyov1-1/+4
[ Upstream commit c5e5f7a8d931fb4beba245bdbc94734175fda9de ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: emev2: add IRQ checkSergey Shtylyov1-1/+4
[ Upstream commit bb6129c32867baa7988f7fd2066cf18ed662d240 ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: 5faf6e1f58b4 ("i2c: emev2: add driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: cadence: add IRQ checkSergey Shtylyov1-1/+4
[ Upstream commit 5581c2c5d02bc63a0edb53e061c8e97cd490646e ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: xiic: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-2/+2
[ Upstream commit a85c5c7a3aa8041777ff691400b4046e56149fd3 ] The PM reference count is not expected to be incremented on return in xiic_xfer and xiic_i2c_remove. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 10b17004a74c ("i2c: xiic: Fix the clocking across bind unbind") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: stm32f7: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-6/+6
[ Upstream commit 2c662660ce2bd3b09dae21a9a9ac9395e1e6c00b ] The PM reference count is not expected to be incremented on return in these stm32f7_i2c_xx serious functions. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: sprd: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-2/+2
[ Upstream commit 3a4f326463117cee3adcb72999ca34a9aaafda93 ] The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: omap: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-4/+4
[ Upstream commit 780f629741257ed6c54bd3eb53b57f648eabf200 ] The PM reference count is not expected to be incremented on return in omap_i2c_probe() and omap_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. I Replace it with pm_runtime_resume_and_get to keep usage counter balanced. What's more, error path 'err_free_mem' seems not like a proper name any more. So I change the name to err_disable_pm and move pm_runtime_disable below, for pm_runtime of 'pdev->dev' should be disabled when pm_runtime_resume_and_get fails. Fixes: 3b0fb97c8dc4 ("I2C: OMAP: Handle error check for pm runtime") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: imx: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-2/+2
[ Upstream commit 47ff617217ca6a13194fcb35c6c3a0c57c080693 ] In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count is not expected to be incremented on return. However, pm_runtime_get_sync will increment pm reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 3a5ee18d2a32 ("i2c: imx: implement master_xfer_atomic callback") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-1/+1
[ Upstream commit 278e5bbdb9a94fa063c0f9bcde2479d0b8042462 ] The PM reference count is not expected to be incremented on return in lpi2c_imx_master_enable. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: img-scb: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-2/+2
[ Upstream commit 223125e37af8a641ea4a09747a6a52172fc4b903 ] The PM reference count is not expected to be incremented on return in functions img_i2c_xfer and img_i2c_init. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 93222bd9b966 ("i2c: img-scb: Add runtime PM") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14i2c: cadence: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-2/+2
[ Upstream commit 23ceb8462dc6f4b4decdb5536a7e5fc477cdf0b6 ] The PM reference count is not expected to be incremented on return in functions cdns_i2c_master_xfer and cdns_reg_slave. However, pm_runtime_get_sync will increment pm usage counter even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 7fa32329ca03 ("i2c: cadence: Move to sensible power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14i2c: designware: Adjust bus_freq_hz when refuse high speed mode setAndy Shevchenko1-0/+1
[ Upstream commit 5e729bc54bda705f64941008b018b4e41a4322bf ] When hardware doesn't support High Speed Mode, we forget bus_freq_hz timing adjustment. This makes the timings and real registers being unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode") Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14I2C: JZ4780: Fix bug for Ingenic X1000.周琰杰 (Zhou Yanjie)1-2/+2
[ Upstream commit 942bfbecc0281c75db84f744b9b77b0f2396f484 ] Only send "X1000_I2C_DC_STOP" when last byte, or it will cause error when I2C write operation which should look like this: device_addr + w, reg_addr, data; But without this patch, it looks like this: device_addr + w, reg_addr, device_addr + w, data; Fixes: 21575a7a8d4c ("I2C: JZ4780: Add support for the X1000.") Reported-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn> Tested-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14i2c: turn recovery error on init to debugWolfram Sang1-3/+4
commit e409a6a3e0690efdef9b8a96197bc61ff117cfaf upstream. In some configurations, recovery is optional. So, don't throw an error when it is not used because e.g. pinctrl settings for recovery are not provided. Reword the message and make it debug output. Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17i2c: rcar: optimize cacheline to minimize HW race conditionWolfram Sang1-1/+1
[ Upstream commit 25c2e0fb5fefb8d7847214cf114d94c7aad8e9ce ] 'flags' and 'io' are needed first, so they should be at the beginning of the private struct. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17i2c: rcar: faster irq code to minimize HW race conditionWolfram Sang1-7/+4
[ Upstream commit c7b514ec979e23a08c411f3d8ed39c7922751422 ] To avoid the HW race condition on R-Car Gen2 and earlier, we need to write to ICMCR as soon as possible in the interrupt handler. We can improve this by writing a static value instead of masking out bits. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: exynos5: Preserve high speed master codeMårten Lindahl1-1/+7
[ Upstream commit f4ff0104d4c807a7f96aa3358c03d694895ee8ea ] When the driver starts to send a message with the MASTER_ID field set (high speed), the whole I2C_ADDR register is overwritten including MASTER_ID as the SLV_ADDR_MAS field is set. This patch preserves already written fields in I2C_ADDR when writing SLV_ADDR_MAS. Fixes: 8a73cd4cfa15 ("i2c: exynos5: add High Speed I2C controller driver") Signed-off-by: Mårten Lindahl <martenli@axis.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: brcmstb: Fix brcmstd_send_i2c_cmd conditionMaxime Ripard1-1/+1
[ Upstream commit a1858ce0cfe31368b23ba55794e409fb57ced4a4 ] The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD || CMD_WR) which always evaluates to true, while the obvious fix is to test whether the cmd variable passed as parameter holds one of these two values. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev structRoja Rani Yarubandi1-16/+43
[ Upstream commit 357ee8841d0b7bd822f25fc768afbc0c2ab7e47b ] Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping data scope. For example during shutdown callback to unmap DMA mapping, this stored DMA mapping data can be used to call geni_se_tx_dma_unprep and geni_se_rx_dma_unprep functions. Add two helper functions geni_i2c_rx_msg_cleanup and geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA transfers, so that the same can be used in geni_i2c_stop_xfer() function during shutdown callback. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: iproc: handle master read requestRayagonda Kokatanur1-45/+170
[ Upstream commit e21d79778768e4e187b2892d662c6aaa01e1d399 ] Handle single or multi byte master read request with or without repeated start. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)Rayagonda Kokatanur1-1/+2
[ Upstream commit 603e77af7b0704bdb057de0368f1f2b04fc9552c ] Update slave isr mask (ISR_MASK_SLAVE) to include remaining two slave interrupts. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i2c: iproc: handle only slave interrupts which are enabledRayagonda Kokatanur1-4/+9
[ Upstream commit 545f4011e156554d704d6278245d54543f6680d1 ] Handle only slave interrupts which are enabled. The IS_OFFSET register contains the interrupt status bits which will be set regardless of the enabling of the corresponding interrupt condition. One must therefore look at both IS_OFFSET and IE_OFFSET to determine whether an interrupt condition is set and enabled. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17i2c: stm32f7: fix configuration of the digital filterAlain Volmat1-1/+10
[ Upstream commit 3d6a3d3a2a7a3a60a824e7c04e95fd50dec57812 ] The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13i2c: mediatek: Move suspend and resume handling to NOIRQ phaseQii Wang1-3/+16
[ Upstream commit de96c3943f591018727b862f51953c1b6c55bcc3 ] Some i2c device driver indirectly uses I2C driver when it is now being suspended. The i2c devices driver is suspended during the NOIRQ phase and this cannot be changed due to other dependencies. Therefore, we also need to move the suspend handling for the I2C controller driver to the NOIRQ phase as well. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-07i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFOSowjanya Komatineni1-1/+21
[ Upstream commit 2f3a0828d46166d4e7df227479ed31766ee67e4a ] VI I2C controller has known hardware bug where immediate multiple writes to TX_FIFO register gets stuck. Recommended software work around is to read I2C register after each write to TX_FIFO register to flush out the data. This patch implements this work around for VI I2C controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27i2c: sprd: depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski1-0/+1
[ Upstream commit 9ecd1d2b302b600351fac50779f43fcb680c1a16 ] The I2C_SPRD uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe': i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent' Fixes: 4a2d5f663dab ("i2c: Enable compile testing for more drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27i2c: octeon: check correct size of maximum RECV_LEN packetWolfram Sang1-1/+1
[ Upstream commit 1b2cfa2d1dbdcc3b6dba1ecb7026a537a1d7277f ] I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Robert Richter <rric@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27i2c: bpmp-tegra: Ignore unknown I2C_M flagsMikko Perttunen1-1/+1
commit bc1c2048abbe3c3074b4de91d213595c57741a6b upstream. In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27i2c: tegra: Wait for config load atomically while in ISRMikko Perttunen1-1/+1
commit 27b7c6e096264cc7b91bb80a4f65f8c0a66f079f upstream. Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17i2c: mediatek: Fix apdma and i2c hand-shake timeoutQii Wang1-5/+22
commit 05f6f7271a38c482c5021967433f7b698e102c45 upstream. With the apdma remove hand-shake signal, it requirs special operation timing to reset i2c manually, otherwise the interrupt will not be triggered, i2c transmission will be timeout. Fixes: 8426fe70cfa4("i2c: mediatek: Add apdma sync in i2c driver") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede1-1/+1
commit 0b3ea2a06de1f52ea30865e227e109a5fd3b6214 upstream. gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17i2c: sprd: use a specific timeout to avoid system hang up issueChunyan Zhang1-1/+7
commit 0b884fe71f9ee6a5df35e677154256ea2099ebb8 upstream. If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"Douglas Anderson1-4/+2
[ Upstream commit 9cb4c67d7717135d6f4600a49ab07b470ea4ee2f ] This reverts commit 02b9aec59243c6240fc42884acc958602146ddf6. As talked about in the patch ("soc: qcom: geni: More properly switch to DMA mode"), swapping the order of geni_se_setup_m_cmd() and geni_se_xx_dma_prep() can sometimes cause corrupted transfers. Thus we traded one problem for another. Now that we've debugged the problem further and fixed the geni helper functions to more disable FIFO interrupts when we move to DMA mode we can revert it and end up with (hopefully) zero problems! To be explicit, the patch ("soc: qcom: geni: More properly switch to DMA mode") is a prerequisite for this one. Fixes: 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA transfer race") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201013142448.v2.2.I7b22281453b8a18ab16ef2bfd4c641fb1cc6a92c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-05i2c: mlxbf: Fix the return check of devm_ioremap and ioremapWang Xiaojun1-6/+6
devm_ioremap and ioremap may return NULL which cannot be checked by IS_ERR. Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-05i2c: mlxbf: select CONFIG_I2C_SLAVEArnd Bergmann1-0/+1
If this is not enabled, the interfaces used in this driver do not work: drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration] i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED' i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED' ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, ^ drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP' i2c_slave_event(slave, I2C_SLAVE_STOP, &value); ^ Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Don't generate STOP condition if arbitration has been lostChristian Eggers1-2/+10
If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Check for I2SR_IAL after every byteChristian Eggers1-0/+10
Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers1-6/+16
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: qcom: Fix IRQ error misassignementRobert Foss1-2/+2
During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain <loic.poulain@linaro.org> Suggested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()Zhihao Cheng1-1/+2
Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVEDMichael Wu1-27/+18
Sometimes we would get the following flow when doing an i2cset: 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4 I2C_SLAVE_WRITE_RECEIVED 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204 I2C_SLAVE_WRITE_REQUESTED I2C_SLAVE_WRITE_RECEIVED Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED, which is mandatory, should be sent while the data did not arrive yet. It means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported before any I2C_SLAVE_WRITE_RECEIVED. By the way, I2C_SLAVE_STOP didn't be reported in the above case because DW_IC_INTR_STAT was not 0x200. dev->status can be used to record the current state, especially Designware I2C controller has no interrupts to identify a write-request. This patch makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS but also I2C_SLAVE_STOP been reported when a STOP condition is received. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 08:49:34 +0000