summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
AgeCommit message (Collapse)AuthorFilesLines
2023-12-20RDMA/bnxt_re: Fix the sparse warningsSelvin Xavier1-1/+1
Fix the following warnings reported drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: warning: invalid assignment: |= drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: left side has type restricted __le16 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: right side has type unsigned long ... drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: warning: invalid assignment: |= drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: left side has type restricted __le64 drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: right side has type unsigned long long Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312200537.HoNqPL5L-lkp@intel.com/ Fixes: 07f830ae4913 ("RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1703046717-8914-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-12-11RDMA/bnxt_re: Adds MSN table capability for Gen P7 adaptersSelvin Xavier1-0/+2
GenP7 HW expects an MSN table instead of PSN table. Check for the HW retransmission capability and populate the MSN table if HW retansmission is supported. Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1701946060-13931-7-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-12-11RDMA/bnxt_re: Support new 5760X P7 devicesSelvin Xavier1-1/+1
Add basic support for 5760X P7 devices. Add new chip revisions. The first version support is similar to the existing P5 adapters. Extend the current support for P5 adapters to P7 also. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1701946060-13931-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-11-13RDMA/bnxt_re: Refactor the queue index updateChandramohan Akula1-9/+8
The queue index wrap around logic is based on power of 2 size depth. All queues are created with power of 2 depth. This increases the memory usage by the driver. This change is required for the next patches that avoids the power of 2 depth requirement for each of the queues. Update the function that increments producer index and consumer index during wrap around. Also, changes the index handling across multiple functions. Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1698069803-1787-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-21RDMA/bnxt_re: Fix the handling of control path response dataSelvin Xavier1-2/+9
Flag that indicate control path command completion should be cleared only after copying the command response data. As soon as the is_in_used flag is clear, the waiting thread can proceed with wrong response data. This wrong data is causing multiple issues like wrong lkey used in data traffic and wrong AH Id etc. Use a memory barrier to ensure that the response data is copied and visible to the process waiting on a different cpu core before clearing the is_in_used flag. Clear the is_in_used after copying the command response. Fixes: bcfee4ce3e01 ("RDMA/bnxt_re: remove redundant cmdq_bitmap") Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1695199280-13520-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-09-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-48/+18
Pull rdma updates from Jason Gunthorpe: "Many small changes across the subystem, some highlights: - Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma, mthca, hns, and bnxt_re - siw now works over tunnel and other netdevs with a MAC address by removing assumptions about a MAC/GID from the connection manager - "Doorbell Pacing" for bnxt_re - this is a best effort scheme to allow userspace to slow down the doorbell rings if the HW gets full - irdma egress VLAN priority, better QP/WQ sizing - rxe bug fixes in queue draining and srq resizing - Support more ethernet speed options in the core layer - DMABUF support for bnxt_re - Multi-stage MTT support for erdma to allow much bigger MR registrations - A irdma fix with a CVE that came in too late to go to -rc, missing bounds checking for 0 length MRs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits) IB/hfi1: Reduce printing of errors during driver shut down RDMA/hfi1: Move user SDMA system memory pinning code to its own file RDMA/hfi1: Use list_for_each_entry() helper RDMA/mlx5: Fix trailing */ formatting in block comment RDMA/rxe: Fix redundant break statement in switch-case. RDMA/efa: Fix wrong resources deallocation order RDMA/siw: Call llist_reverse_order in siw_run_sq RDMA/siw: Correct wrong debug message RDMA/siw: Balance the reference of cep->kref in the error path Revert "IB/isert: Fix incorrect release of isert connection" RDMA/bnxt_re: Fix kernel doc errors RDMA/irdma: Prevent zero-length STAG registration RDMA/erdma: Implement hierarchical MTT RDMA/erdma: Refactor the storage structure of MTT entries RDMA/erdma: Renaming variable names and field names of struct erdma_mem RDMA/hns: Support hns HW stats RDMA/hns: Dump whole QP/CQ/MR resource in raw RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp() RDMA/mlx4: Copy union directly RDMA/irdma: Drop unused kernel push code ...
2023-08-21RDMA/bnxt_re: Fix kernel doc errorsLeon Romanovsky1-15/+15
Fix set of the following errors due to use of wrong kernel doc format to describe function parameters: drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:68: warning: Function parameter or member 'rcfw' not described in '__wait_for_resp' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308180600.oOnkIAQV-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180401.iaj2ktTc-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180214.Lt9NAhbM-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308180055.6zM4AK6V-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308172136.ipx1wvs6-lkp@intel.com/ Link: https://lore.kernel.org/r/4b22c385f1b68590ace8f82f2985d14b20999432.1692539554.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-07RDMA/bnxt_re: Remove unnecessary variable initializationsKalesh AP1-1/+1
Remove unnecessary variable initializations. Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1691052326-32143-7-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-07RDMA/bnxt_re: Fix the sideband buffer size handling for FW commandsSelvin Xavier1-32/+2
bnxt_qplib_rcfw_alloc_sbuf allocates 24 bytes and it is better to fit on stack variables. This way we can avoid unwanted kmalloc call. Call dma_alloc_coherent directly instead of wrapper bnxt_qplib_rcfw_alloc_sbuf. Also, FW expects the side buffer needs to be aligned to BNXT_QPLIB_CMDQE_UNITS(16B). So align the size to have the extra padding bytes. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1691052326-32143-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-17RDMA/bnxt_re: Fix hang during driver unloadSelvin Xavier1-5/+4
Driver unload hits a hang during stress testing of load/unload. stack trace snippet - tasklet_kill at ffffffff9aabb8b2 bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re] bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re] bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re] bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re] tasklet_kill can hang if the tasklet is scheduled after it is disabled. Modified the sequences to disable the interrupt first and synchronize irq before disabling the tasklet. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-26RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()Kashyap Desai1-8/+15
Update function comment of bnxt_qplib_map_rc() Remove intermediate return value ENXIO and directly called bnxt_qplib_map_rc() from __send_message_basic_sanity(). Link: https://lore.kernel.org/r/20230616061700.741769-2-kashyap.desai@broadcom.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-26RDMA/bnxt_re: Remove incorrect return check from slow pathKashyap Desai1-6/+0
The commit 691eb7c6110f ("RDMA/bnxt_re: handle command completions after driver detect a timedout") introduced code resulting in below warning issued by the smatch static checker. drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:513 __bnxt_qplib_rcfw_send_message() warn: duplicate check 'rc' (previous on line 506) Fix the warning by removing incorrect code block. Fixes: 691eb7c6110f ("RDMA/bnxt_re: handle command completions after driver detect a timedout") Link: https://lore.kernel.org/r/20230616061700.741769-1-kashyap.desai@broadcom.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-21RDMA/bnxt_re: Initialize opcode while sending messageLeon Romanovsky1-3/+2
Fix compilation warning: drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:325:18: error: variable 'opcode' is uninitialized when used here [-Werror,-Wuninitialized] crsqe->opcode = opcode; ^~~~~~ drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:291:11: note: initialize the variable 'opcode' to silence this warning u8 opcode; ^ = '\0' Fixes: bcfee4ce3e01 ("RDMA/bnxt_re: remove redundant cmdq_bitmap") Link: https://lore.kernel.org/r/6ad1e44be2b560986da6fdc6b68da606413e9026.1686644105.git.leonro@nvidia.com Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-12RDMA/bnxt_re: optimize the parameters passed to helper functionsKashyap Desai1-25/+19
Avoid passing arguments like Opcode which can be retrieved from bnxt_qplib_crsqe structure. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-18-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: remove redundant cmdq_bitmapKashyap Desai1-47/+32
cmdq_bitmap is used to derive the next available index in the CMDQ. This is not required as the we can get the next index using the existing bnxt_qplib_crsqe array. Driver will use bnxt_qplib_crsqe array and flag is_in_used to derive valid entries. is_in_used is replacement of cmdq_bitmap. There is no change in the existing mechanism of the circular buffer used to get index. Added opcode field in bnxt_qplib_crsqe array so that it is easy to map opcode associated with pending rcfw command. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-17-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: use firmware provided max request timeoutKashyap Desai1-11/+48
Firmware provides max request timeout value as part of hwrm_ver_get API. Driver gets the timeout from firmware and if that interface is not available then fall back to hardcoded timeout value. Also, Add a helper function to check the FW status. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-16-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: cancel all control path command waiters upon errorKashyap Desai1-2/+2
When an error is detected in FW, wake up all the waiters as the all of them need to be completed with timeout. Add the device error state also as a wait condition. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-15-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: post destroy_ah for delayed completion of AH creationKashyap Desai1-0/+108
AH create may be called from interrpt context and driver has a special timeout (8 sec) for this command. This is to avoid soft lockups when the FW command takes more time. Driver returns -ETIMEOUT and fail create AH, without waiting for actual completion from firmware. When FW completion is received, use is_waiter_alive flag to avoid a regular completion path. If create_ah opcode is detected in completion path which does not have waiter alive, driver will fetch ah_id from successful firmware completion in the interrupt context and sends destroy_ah command for same ah_id. This special post is done in quick manner using helper function __send_message_no_waiter. timeout_send is only used for debugging purposes. If timeout_send value keeps incrementing, it indicates out of sync active ah counter between driver and firmware. This is a limitation but graceful handling is possible in future. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-13-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: Add firmware stall check detectionKashyap Desai1-8/+36
Every completion will update last_seen value in the unit of jiffies. last_seen field will be used to know if firmware is alive and is useful to detect firmware stall. Non blocking interface __wait_for_resp will have logic to detect firmware stall. After every 10 second interval if __wait_for_resp has not received completion for a given command it will check for firmware stall condition. If current jiffies is greater than last_seen jiffies + RCFW_FW_STALL_TIMEOUT_SEC * HZ, it is a firmware stall. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-12-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: handle command completions after driver detect a timedoutKashyap Desai1-26/+33
If calling context detect command timeout, associated memory stored on stack will not be valid. If firmware complete the same command later, this causes incorrect memory access by driver. Added is_waiter_alive to handle delayed completion by firmware. is_waiter_alive is set and reset under command queue lock. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-11-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: add helper function __poll_for_respKashyap Desai1-1/+43
This interface will be used if the driver has not enabled interrupt and/or interrupt is disabled for a short period of time. Completion is not possible from interrupt so this interface does self-polling. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-10-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: Simplify the function that sends the FW commandsKashyap Desai1-61/+64
- Use __send_message_basic_sanity helper function. - Do not retry posting same command if there is a queue full detection. - ENXIO is used to indicate controller recovery. - In the case of ERR_DEVICE_DETACHED state, the driver should not post commands to the firmware, but also return fabricated written code. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-9-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: use shadow qd while posting non blocking rcfw commandKashyap Desai1-2/+58
Whenever there is a fast path IO and create/destroy resources from the slow path is happening in parallel, we may notice high latency of slow path command completion. Introduces a shadow queue depth to prevent the outstanding requests to the FW. Driver will not allow more than #RCFW_CMD_NON_BLOCKING_SHADOW_QD non-blocking commands to the Firmware. Shadow queue depth is a soft limit only for non-blocking commands. Blocking commands will be posted to the firmware as long as there is a free slot. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: Avoid the command wait if firmware is inactiveKashyap Desai1-4/+48
Add a check to avoid waiting if driver already detects a FW timeout. Return success for resource destroy in case the device is detached. Add helper function to map timeout error code to success. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-7-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: Enhance the existing functions that wait for FW responsesKashyap Desai1-14/+51
Use jiffies based timewait instead of counting iteration for commands that block for FW response. Also add a poll routine for control path commands. This is for polling completion if the waiting commands timeout. This avoids cases where the driver misses completion interrupts. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-6-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: set fixed command queue depthKashyap Desai1-4/+2
There is no need of setting max command queue entries based on firmware version check. Removing deperecated code. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: remove virt_func check while creating RoCE FW channelKashyap Desai1-9/+6
There is a common FW communication offset for both PF and VF. Removed code around virt_fn check while creating FW channel. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: Avoid calling wake_up threads from spin_lock contextKashyap Desai1-3/+10
bnxt_qplib_service_creq can be called from interrupt or tasklet or process context. So the function take irq variant of spin_lock. But when wake_up is invoked with the lock held, it is putting the calling context to sleep. [exception RIP: __wake_up_common+190] RIP: ffffffffb7539d7e RSP: ffffa73300207ad8 RFLAGS: 00000083 RAX: 0000000000000001 RBX: ffff91fa295f69b8 RCX: dead000000000200 RDX: ffffa733344af940 RSI: ffffa73336527940 RDI: ffffa73336527940 RBP: 000000000000001c R8: 0000000000000002 R9: 00000000000299c0 R10: 0000017230de82c5 R11: 0000000000000002 R12: ffffa73300207b28 R13: 0000000000000000 R14: ffffa733341bf928 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Call the wakeup after releasing the lock. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-12RDMA/bnxt_re: wraparound mbox producer indexKashyap Desai1-2/+2
Driver is not handling the wraparound of the mbox producer index correctly. Currently the wraparound happens once u32 max is reached. Bit 31 of the producer index register is special and should be set only once for the first command. Because the producer index overflow setting bit31 after a long time, FW goes to initialization sequence and this causes FW hang. Fix is to wraparound the mbox producer index once it reaches u16 max. Fixes: cee0c7bba486 ("RDMA/bnxt_re: Refactor command queue management code") Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1686308514-11996-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-05-19RDMA/bnxt_re: Use unique names while registering interruptsKalesh AP1-2/+13
bnxt_re currently uses the names "bnxt_qplib_creq" and "bnxt_qplib_nq-0" while registering IRQs. There is no way to distinguish the IRQs of different device ports when there are multiple IB devices registered. This could make the scenarios worse where one want to pin IRQs of a device port to certain CPUs. Fixed the code to use unique names which has PCI BDF information while registering interrupts like: "bnxt_re-nq-0@pci:0000:65:00.0" and "bnxt_re-creq@pci:0000:65:00.1". Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-4-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Disable/kill tasklet only if it is enabledSelvin Xavier1-5/+9
When the ulp hook to start the IRQ fails because the rings are not available, tasklets are not enabled. In this case when the driver is unloaded, driver calls CREQ tasklet_kill. This causes an indefinite hang as the tasklet is not enabled. Driver shouldn't call tasklet_kill if it is not enabled. So using the creq->requested and nq->requested flags to identify if both tasklets/irqs are registered. Checking this flag while scheduling the tasklet from ISR. Also, added a cleanup for disabling tasklet, in case request_irq fails during start_irq. Check for return value for bnxt_qplib_rcfw_start_irq and in case the bnxt_qplib_rcfw_start_irq fails, return bnxt_re_start_irq without attempting to start NQ IRQs. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-04RDMA/bnxt_re: Enable congestion control by defaultSelvin Xavier1-8/+7
Enable Congesion control by default. Issue FW command enable the CC during driver load and disable it during unload. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1680169540-10029-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-04-04RDAM/bnxt_re: Use tlv apis while processing the slow path commandsSelvin Xavier1-11/+11
Use the new TLV APIs for existing slow path commands. The TLV APIs will be used to populate extended headers for some of the Firmware commands, which will be introduced in the patches that follow. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1680169540-10029-7-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-04-04RDMA/bnxt_re: Reduce number of argumets to control path command APIsSelvin Xavier1-35/+35
Reducing the number of arguments to bnxt_qplib_rcfw_send_message by enclosing all its arguments into a command message structure. Use the same struct while passing the command information to send_message. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1680169540-10029-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-04-04RDMA/bnxt_re: Convert RCFW_CMD_PREP macro to static inline functionSelvin Xavier1-4/+6
Convert RCFW_CMD_PREP macro to static inline function. Also, remove the cmd_flags passed as none of the functions are using it. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1680169540-10029-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2021-11-29RDMA/bnxt_re: Use bitmap_zalloc() when applicableChristophe JAILLET1-4/+2
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Link: https://lore.kernel.org/r/5c029daf43b92fdc27926fe8a98084843437c498.1637872888.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-16RDMA/bnxt_re: Scan the whole bitmap when checking if "disabling RCFW with ↵Christophe JAILLET1-4/+2
pending cmd-bit" The 'cmdq->cmdq_bitmap' bitmap is 'rcfw->cmdq_depth' bits long. The size stored in 'cmdq->bmap_size' is the size of the bitmap in bytes. Remove this erroneous 'bmap_size' and use 'rcfw->cmdq_depth' directly in 'bnxt_qplib_disable_rcfw_channel()'. Otherwise some error messages may be missing. Other uses of 'cmdq_bitmap' already take into account 'rcfw->cmdq_depth' directly. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/47ed717c3070a1d0f53e7b4c768a4fd11caf365d.1636707421.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Use GFP_KERNEL in non atomic contextSelvin Xavier1-2/+2
Use GFP_KERNEL instead of GFP_ATOMIC while allocating control path structures which will be only called from non atomic context Link: https://lore.kernel.org/r/1631709163-2287-10-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-20RDMA/bnxt_re: Reduce the delay in polling for hwrm command completionSelvin Xavier1-1/+1
Driver has 1ms delay between the polling for atomic command completion. Polling immediately after issuing command usually doesn't report any completions. So all commands in the blocking path needs two iterations. So effectively 1ms spend on each command. HW requires much lesser time for each command. So reduce the delay to 1us and increase the iteration count to wait for the same time. Link: https://lore.kernel.org/r/1631709163-2287-5-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA/bnxt_re: Move device to error state upon device crashSelvin Xavier1-0/+4
When the L2 driver detects a device crash or device undergone reset, it invokes a stop callback to recover from error. The current RoCE driver doesn't recover the device. So move the device to error state and dispatch fatal events to all qps Release the MSIx vectors to avoid a crash when L2 driver disables the MSIx. Also, check for the device state to avoid posting further commands to the HW. Link: https://lore.kernel.org/r/1615968942-30970-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-18Merge branch 'mlx5_active_speed' into rdma.git for-nextJason Gunthorpe1-4/+6
Leon Romanovsky says: ==================== IBTA declares speed as 16 bits, but kernel stores it in u8. This series fixes in-kernel declaration while keeping external interface intact. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_active_speed': RDMA: Fix link active_speed size RDMA/mlx5: Delete duplicated mlx5_ptys_width enum net/mlx5: Refactor query port speed functions
2020-09-03RDMA/bnxt_re: Convert tasklets to use new tasklet_setup() APIAllen Pais1-6/+5
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Link: https://lore.kernel.org/r/20200903060637.424458-2-allen.lkml@gmail.com Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/bnxt_re: Fix the qp table indexingSelvin Xavier1-4/+6
qp->id can be a value outside the max number of qp. Indexing the qp table with the id can cause out of bounds crash. So changing the qp table indexing by (qp->id % max_qp -1). Allocating one extra entry for QP1. Some adapters create one more than the max_qp requested to accommodate QP1. If the qp->id is 1, store the inforamtion in the last entry of the qp table. Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error") Link: https://lore.kernel.org/r/1598292876-26529-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-04-14RDMA/bnxt_re: Simplify obtaining queue entry from hw ringDevesh Sharma1-11/+5
Restructring the data path and control path queue management code to simplify the way a queue element is extracted from the hardware ring. Introduced a new function which will give a pointer to the next ring item depending upon the current cons/prod index in the hardware queue. Further, there are hardcoding when size of queue entry is calculated, replacing it with an inline function. This function would be easier to expand if need going forward. The code section to initialize the PSN search areas has also been restructured and couple of functions has been added there. Link: https://lore.kernel.org/r/1585851136-2316-4-git-send-email-devesh.sharma@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-04-14RDMA/bnxt_re: Reduce device page size detection codeDevesh Sharma1-45/+27
Getting rid of the repeated code in the driver when deciding on the page size of the hardware ring memory. A new common function would translate the ring page size into device specific page size. Link: https://lore.kernel.org/r/1585851136-2316-2-git-send-email-devesh.sharma@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-02RDMA/bnxt_re: Remove set but not used variables 'pg' and 'idx'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/bnxt_re/qplib_rcfw.c: In function '__send_message': drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:10: warning: variable 'idx' set but not used [-Wunused-but-set-variable] drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:6: warning: variable 'pg' set but not used [-Wunused-but-set-variable] commit cee0c7bba486 ("RDMA/bnxt_re: Refactor command queue management code") involved this, but not used. Link: https://lore.kernel.org/r/20200227064900.92255-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-21RDMA/bnxt_re: Refactor doorbell management functionsDevesh Sharma1-13/+8
Moving all the fast path doorbell functions at one place under qplib_res.h. To pass doorbell record information a new structure bnxt_qplib_db_info has been introduced. Every roce object holds an instance of this structure and doorbell information is initialized during resource creation. When DB is rung only the current queue index is read from hardware ring and rest of the data is taken from pre-initialized dbinfo structure. Link: https://lore.kernel.org/r/1581786665-23705-8-git-send-email-devesh.sharma@broadcom.com Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-21RDMA/bnxt_re: Refactor command queue management codeDevesh Sharma1-166/+253
Refactoring the command queue (rcfw) management code. A new data-structure is introduced to describe the bar register. each object which deals with mmio space should have a descriptor structure. This structure specifically hold DB register information. Thus, slow path creq structure now hold a bar register descriptor. Further cleanup the rcfw structure to introduce the command queue context and command response event queue context structures. Rest of the rcfw related code has been touched to incorporate these three structures. Link: https://lore.kernel.org/r/1581786665-23705-6-git-send-email-devesh.sharma@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-21RDMA/bnxt_re: Refactor hardware queue memory allocationDevesh Sharma1-25/+32
At top level there are three major data structure addition. viz bnxt_qplib_hwq_attr, bnxt_qplib_sg_info and bnxt_qplib_tqm_ctx Intorduction of first data structure reduces the arguments list to bnxt_re_alloc_init_hwq() function. There are changes all over the driver code to incorporate this new structure. The caller needs to fill the attribute data structure and pass to this function. The second data structure is to pass memory region description viz. sghead, page_size and page_shift. There are changes all over the driver code to initialize bnxt_re_sg_info data structure. The new data structure helps to reduce the argument list of __alloc_pbl() function call. Till now the TQM rings related members were not collected under any specific data-structure making it hard to manage. The third data sctructure bnxt_qplib_tqm_ctx is added to refactor the TQM queue allocation and initialization. Link: https://lore.kernel.org/r/1581786665-23705-4-git-send-email-devesh.sharma@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-2/+2
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-07 21:11:04 +0000