summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2019-08-01RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp()Wei Yongjun1-1/+3
Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error handling case instead of 0, as done elsewhere in this function. Fixes: e8ac9389f0d7 ("RDMA: Fix allocation failure on pointer pd") Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/mlx5: Release locks during notifier unregisterLeon Romanovsky1-4/+3
The below kernel panic was observed when created bond mode LACP with GRE tunnel on top. The reason to it was not released spinlock during mlx5 notify unregsiter sequence. [ 234.562007] BUG: scheduling while atomic: sh/10900/0x00000002 [ 234.563005] Preemption disabled at: [ 234.566864] ------------[ cut here ]------------ [ 234.567120] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 234.567139] WARNING: CPU: 16 PID: 10900 at kernel/sched/core.c:3203 preempt_count_sub+0xca/0x170 [ 234.569550] CPU: 16 PID: 10900 Comm: sh Tainted: G W 5.2.0-rc1-for-linust-dbg-2019-05-25_04-57-33-60 #1 [ 234.569886] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.6.1 02/12/2018 [ 234.570183] RIP: 0010:preempt_count_sub+0xca/0x170 [ 234.570404] Code: 03 38 d0 7c 08 84 d2 0f 85 b0 00 00 00 8b 15 dd 02 03 04 85 d2 75 ba 48 c7 c6 00 e1 88 83 48 c7 c7 40 e1 88 83 e8 76 11 f7 ff <0f> 0b 5b c3 65 8b 05 d3 1f d8 7e 84 c0 75 82 e8 62 c3 c3 00 85 c0 [ 234.570911] RSP: 0018:ffff888b94477b08 EFLAGS: 00010286 [ 234.571133] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 234.571391] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000246 [ 234.571648] RBP: ffff888ba5560000 R08: fffffbfff08962d5 R09: fffffbfff08962d5 [ 234.571902] R10: 0000000000000001 R11: fffffbfff08962d4 R12: ffff888bac6e9548 [ 234.572157] R13: ffff888babfaf728 R14: ffff888bac6e9568 R15: ffff888babfaf750 [ 234.572412] FS: 00007fcafa59b740(0000) GS:ffff888bed200000(0000) knlGS:0000000000000000 [ 234.572686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 234.572914] CR2: 00007f984f16b140 CR3: 0000000b2bf0a001 CR4: 00000000001606e0 [ 234.573172] Call Trace: [ 234.573336] _raw_spin_unlock+0x2e/0x50 [ 234.573542] mlx5_ib_unbind_slave_port+0x1bc/0x690 [mlx5_ib] [ 234.573793] mlx5_ib_cleanup_multiport_master+0x1d3/0x660 [mlx5_ib] [ 234.574039] mlx5_ib_stage_init_cleanup+0x4c/0x360 [mlx5_ib] [ 234.574271] ? kfree+0xf5/0x2f0 [ 234.574465] __mlx5_ib_remove+0x61/0xd0 [mlx5_ib] [ 234.574688] ? __mlx5_ib_remove+0xd0/0xd0 [mlx5_ib] [ 234.574951] mlx5_remove_device+0x234/0x300 [mlx5_core] [ 234.575224] mlx5_unregister_device+0x4d/0x1e0 [mlx5_core] [ 234.575493] remove_one+0x4f/0x160 [mlx5_core] [ 234.575704] pci_device_remove+0xef/0x2a0 [ 234.581407] ? pcibios_free_irq+0x10/0x10 [ 234.587143] ? up_read+0xc1/0x260 [ 234.592785] device_release_driver_internal+0x1ab/0x430 [ 234.598442] unbind_store+0x152/0x200 [ 234.604064] ? sysfs_kf_write+0x3b/0x180 [ 234.609441] ? sysfs_file_ops+0x160/0x160 [ 234.615021] kernfs_fop_write+0x277/0x440 [ 234.620288] ? __sb_start_write+0x1ef/0x2c0 [ 234.625512] vfs_write+0x15e/0x460 [ 234.630786] ksys_write+0x156/0x1e0 [ 234.635988] ? __ia32_sys_read+0xb0/0xb0 [ 234.641120] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 234.646163] do_syscall_64+0x95/0x470 [ 234.651106] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 234.656004] RIP: 0033:0x7fcaf9c9cfd0 [ 234.660686] Code: 73 01 c3 48 8b 0d c0 6e 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d cd cf 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee cb 01 00 48 89 04 24 [ 234.670128] RSP: 002b:00007ffd3b01ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 234.674811] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fcaf9c9cfd0 [ 234.679387] RDX: 000000000000000d RSI: 00007fcafa5c1000 RDI: 0000000000000001 [ 234.683848] RBP: 00007fcafa5c1000 R08: 000000000000000a R09: 00007fcafa59b740 [ 234.688167] R10: 00007ffd3b01d8e0 R11: 0000000000000246 R12: 00007fcaf9f75400 [ 234.692386] R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000000 [ 234.696495] irq event stamp: 153067 [ 234.700525] hardirqs last enabled at (153067): [<ffffffff83258c39>] _raw_spin_unlock_irqrestore+0x59/0x70 [ 234.704665] hardirqs last disabled at (153066): [<ffffffff83259382>] _raw_spin_lock_irqsave+0x22/0x90 [ 234.708722] softirqs last enabled at (153058): [<ffffffff836006c5>] __do_softirq+0x6c5/0xb4e [ 234.712673] softirqs last disabled at (153051): [<ffffffff81227c1d>] irq_exit+0x17d/0x1d0 [ 234.716601] ---[ end trace 5dbf096843ee9ce6 ]--- Fixes: df097a278c75 ("IB/mlx5: Use the new mlx5 core notifier API") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731083852.584-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01IB/hfi1: Fix Spectre v1 vulnerabilityGustavo A. R. Silva1-0/+2
sl is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. Fix this by sanitizing sl before using it to index ibp->sl_to_sc. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01IB/mad: Fix use-after-free in ib mad completion handlingJack Morgenstein1-10/+10
We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/restrack: Track driver QP types in resource trackerGal Pressman1-1/+4
The check for QP type different than XRC has excluded driver QP types from the resource tracker. As a result, "rdma resource show" user command would not show opened driver QPs which does not reflect the real state of the system. Check QP type explicitly instead of assuming enum values/ordering. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801104354.11417-1-galpress@amazon.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01IB/mlx5: Fix MR registration flow to use UMR properlyGuy Levi1-18/+9
Driver shouldn't allow to use UMR to register a MR when umr_modify_atomic_disabled is set. Otherwise it will always end up with a failure in the post send flow which sets the UMR WQE to modify atomic access right. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Remove the lock around remove_client_contextJason Gunthorpe1-21/+27
Due to the complexity of client->remove() callbacks it is desirable to not hold any locks while calling them. Remove the last one by tracking only the highest client ID and running backwards from there over the xarray. Since the only purpose of that lock was to protect the linked list, we can drop the lock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Do not deadlock during client removalJason Gunthorpe1-13/+41
lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01IB/core: Add mitigation for Spectre V1Luck, Tony1-1/+5
Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29Do not dereference 'siw_crypto_shash' before checkingBernard Metzler1-2/+4
Reported-by: "Dan Carpenter" <dan.carpenter@oracle.com> Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Link: https://lore.kernel.org/r/OF61E386ED.49A73798-ON00258444.003BD6A6-00258444.003CC8D9@notes.na.collabserv.com Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29RDMA/qedr: Fix the hca_type and hca_rev returned in device attributesMichal Kalderon1-2/+8
There was a place holder for hca_type and vendor was returned in hca_rev. Fix the hca_rev to return the hw revision and fix the hca_type to return an informative string representing the hca. Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/20190728111338.21930-1-michal.kalderon@marvell.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29RDMA/hns: Fix build errorYueHaibing2-9/+5
If INFINIBAND_HNS_HIP08 is selected and HNS3 is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_exit': hns_roce_hw_v2.c:(.exit.text+0xd): undefined reference to `hnae3_unregister_client' drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_init': hns_roce_hw_v2.c:(.init.text+0xd): undefined reference to `hnae3_register_client' Also if INFINIBAND_HNS_HIP06 is selected and HNS_DSAF is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v1.o: In function `hns_roce_v1_reset': hns_roce_hw_v1.c:(.text+0x39fa): undefined reference to `hns_dsaf_roce_reset' hns_roce_hw_v1.c:(.text+0x3a25): undefined reference to `hns_dsaf_roce_reset' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dd74282df573 ("RDMA/hns: Initialize the PCI device for hip08 RoCE") Fixes: 08805fdbeb2d ("RDMA/hns: Split hw v1 driver from hns roce driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190724065443.53068-1-yuehaibing@huawei.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-25IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specificationYishai Hadas1-1/+0
The specification for the Toeplitz function doesn't require to set the key explicitly to be symmetric. In case a symmetric functionality is required a symmetric key can be simply used. Wrongly forcing the algorithm to symmetric causes the wrong packet distribution and a performance degradation. Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.7 Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Alex Vainman <alexv@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/counters: Always initialize the port counter objectParav Pandit1-4/+4
Port counter objects should be initialized even if alloc_stats is unsupported, otherwise QP bind operations in user space can trigger a NULL pointer deference if they try to bind QP on RDMA device which doesn't support counters. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-11-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/core: Fix querying total rdma statsParav Pandit1-0/+3
rdma_counter_init() may fail for a device. In such case while calculating total sum, ignore NULL hstats. This fixes below observed call trace. BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ #13 RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core] Call Trace: show_hw_stats+0x5e/0x130 [ib_core] dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xc6/0x1a0 seq_read+0x132/0x370 vfs_read+0x89/0x140 ksys_read+0x5c/0xd0 do_syscall_64+0x5a/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25IB/mlx5: Prevent concurrent MR updates during invalidationMoni Shoua1-1/+2
The device requires that memory registration work requests that update the address translation table of a MR will be fenced if posted together. This scenario can happen when address ranges are invalidated by the mmu in separate concurrent calls to the invalidation callback. We prefer to block concurrent address updates for a single MR over fencing since making the decision if a WQE needs fencing will be more expensive and fencing all WQEs is a too radical choice. Further, it isn't clear that this code can even run safely concurrently, so a lock is a safer choice. Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-24IB/mlx5: Fix clean_mr() to work in the expected orderYishai Hadas1-3/+3
Any dma map underlying the MR should only be freed once the MR is fenced at the hardware. As of the above we first destroy the MKEY and just after that can safely call to dma_unmap_single(). Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.3 Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-24IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cacheYishai Hadas1-1/+3
Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which can't be accessed by userspace. This ensures that nothing can continue to access the MR once it has been placed in the kernels cache for reuse. MRs in the cache continue to have their HW state, including DMA tables, present. Even though the MR has been invalidated, changing the PD provides an additional layer of protection against use of the MR. Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-24IB/mlx5: Use direct mkey destroy command upon UMR unreg failureYishai Hadas1-5/+8
Use a direct firmware command to destroy the mkey in case the unreg UMR operation has failed. This prevents a case that a mkey will leak out from the cache post a failure to be destroyed by a UMR WR. In case the MR cache limit didn't reach a call to add another entry to the cache instead of the destroyed one is issued. In addition, replaced a warn message to WARN_ON() as this flow is fatal and can't happen unless some bug around. Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-24IB/mlx5: Fix unreg_umr to ignore the mkey stateYishai Hadas3-6/+11
Fix unreg_umr to ignore the mkey state and do not fail if was freed. This prevents a case that a user space application already changed the mkey state to free and then the UMR operation will fail leaving the mkey in an inappropriate state. Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org Cc: <stable@vger.kernel.org> # 3.19 Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22RDMA/siw: Remove set but not used variables 'rv'Mao Wenan1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/sw/siw/siw_cm.c: In function siw_cep_set_inuse: drivers/infiniband/sw/siw/siw_cm.c:223:6: warning: variable rv set but not used [-Wunused-but-set-variable] Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/20190719012938.100628-1-maowenan@huawei.com Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/mlx5: Replace kfree with kvfreeChuhong Yuan1-2/+2
Memory allocated by kvzalloc should not be freed by kfree(), use kvfree() instead. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.com Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22RDMA/bnxt_re: Honor vlan_id in GID entry comparisonSelvin Xavier5-13/+30
A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate check comparisons to consider vlan_id as well to support IPv6 VLAN based link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to hold gid and vlan_id information. The issue is discussed in the following thread https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs") Cc: <stable@vger.kernel.org> # v5.2+ Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com Reported-by: Yi Zhang <yi.zhang@redhat.com> Co-developed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psnKaike Wan1-41/+1
When a TID sequence error occurs while receiving TID RDMA READ RESP packets, all packets after flow->flow_state.r_next_psn should be dropped, including those response packets for subsequent segments. The current implementation will drop the subsequent response packets for the segment to complete next, but may accept packets for subsequent segments and therefore mistakenly advance the r_next_psn fields for the corresponding software flows. This may result in failures to complete subsequent segments after the current segment is completed. The fix is to only use the flow pointed by req->clear_tail for checking KDETH PSN instead of finding a flow from the request's flow array. Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Field not zero-ed when allocating TID flow memoryKaike Wan1-0/+1
The field flow->resync_npkts is added for TID RDMA WRITE request and zero-ed when a TID RDMA WRITE RESP packet is received by the requester. This field is used to rewind a request during retry in the function hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA READ requests. Therefore, when a TID RDMA READ request is retried, this field may not be initialized at all, which causes the retry to start at an incorrect psn, leading to the drop of the retry request by the responder. This patch fixes the problem by zeroing out the field when the flow memory is allocated. Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Unreserve a flushed OPFN requestKaike Wan1-2/+0
When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Check for error on call to alloc_rsm_map_tableJohn Fleck1-2/+9
The call to alloc_rsm_map_table does not check if the kmalloc fails. Check for a NULL on alloc, and bail if it fails. Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS") Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: John Fleck <john.fleck@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22RDMA/hns: Fix sg offset non-zero issueXi Wang1-7/+8
When run perftest in many times, the system will report a BUG as follows: BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1 BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1 We tested with different kernel version and found it started from the the following commit: commit d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") In this commit, the sg->offset is always 0 when sg_set_page() is called in ib_umem_get() and the drivers are not allowed to change the sgl, otherwise it will get bad page descriptor when unfolding SGEs in __ib_umem_release() as sg_page_count() will get wrong result while sgl->offset is not 0. However, there is a weird sgl usage in the current hns driver, the driver modified sg->offset after calling ib_umem_get(), which caused we iterate past the wrong number of pages in for_each_sg_page iterator. This patch fixes it by correcting the non-standard sgl usage found in the hns_roce_db_map_user() function. Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22RDMA/siw: Fix error return code in siw_init_module()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/20190718092710.85709-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-20Merge tag 'scsi-fixes' of ↵Linus Torvalds2-43/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds1-9/+17
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-16scsi: IB/srp: set virt_boundary_mask in the scsi hostChristoph Hellwig1-15/+3
This ensures all proper DMA layer handling is taken care of by the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-16scsi: IB/iser: set virt_boundary_mask in the scsi hostChristoph Hellwig1-28/+7
This ensures all proper DMA layer handling is taken care of by the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds184-24117/+17579
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge updates from Andrew Morton: "Am experimenting with splitting MM up into identifiable subsystems perhaps with a view to gitifying it in complex ways. Also with more verbose "incoming" emails. Most of MM is here and a few other trees. Subsystems affected by this patch series: - hotfixes - iommu - scripts - arch/sh - ocfs2 - mm:slab-generic - mm:slub - mm:kmemleak - mm:kasan - mm:cleanups - mm:debug - mm:pagecache - mm:swap - mm:memcg - mm:gup - mm:pagemap - mm:infrastructure - mm:vmalloc - mm:initialization - mm:pagealloc - mm:vmscan - mm:tools - mm:proc - mm:ras - mm:oom-kill hotfixes: mm: vmscan: scan anonymous pages on file refaults mm/nvdimm: add is_ioremap_addr and use that to check ioremap address mm/memcontrol: fix wrong statistics in memory.stat mm/z3fold.c: lock z3fold page before __SetPageMovable() nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header MAINTAINERS: nilfs2: update email address iommu: include/linux/dmar.h: replace single-char identifiers in macros scripts: scripts/decode_stacktrace: match basepath using shell prefix operator, not regex scripts/decode_stacktrace: look for modules with .ko.debug extension scripts/spelling.txt: drop "sepc" from the misspelling list scripts/spelling.txt: add spelling fix for prohibited scripts/decode_stacktrace: Accept dash/underscore in modules scripts/spelling.txt: add more spellings to spelling.txt arch/sh: arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFS sh: config: remove left-over BACKLIGHT_LCD_SUPPORT sh: prevent warnings when using iounmap ocfs2: fs: ocfs: fix spelling mistake "hearbeating" -> "heartbeat" ocfs2/dlm: use struct_size() helper ocfs2: add last unlock times in locking_state ocfs2: add locking filter debugfs file ocfs2: add first lock wait time in locking_state ocfs: no need to check return value of debugfs_create functions fs/ocfs2/dlmglue.c: unneeded variable: "status" ocfs2: use kmemdup rather than duplicating its implementation mm:slab-generic: Patch series "mm/slab: Improved sanity checking": mm/slab: validate cache membership under freelist hardening mm/slab: sanity-check page type when looking up cache lkdtm/heap: add tests for freelist hardening mm:slub: mm/slub.c: avoid double string traverse in kmem_cache_flags() slub: don't panic for memcg kmem cache creation failure mm:kmemleak: mm/kmemleak.c: fix check for softirq context mm/kmemleak.c: change error at _write when kmemleak is disabled docs: kmemleak: add more documentation details mm:kasan: mm/kasan: print frame description for stack bugs Patch series "Bitops instrumentation for KASAN", v5: lib/test_kasan: add bitops tests x86: use static_cpu_has in uaccess region to avoid instrumentation asm-generic, x86: add bitops instrumentation for KASAN Patch series "mm/kasan: Add object validation in ksize()", v3: mm/kasan: introduce __kasan_check_{read,write} mm/kasan: change kasan_check_{read,write} to return boolean lib/test_kasan: Add test for double-kzfree detection mm/slab: refactor common ksize KASAN logic into slab_common.c mm/kasan: add object validation in ksize() mm:cleanups: include/linux/pfn_t.h: remove pfn_t_to_virt() Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect": arm: remove ARCH_SELECT_MEMORY_MODEL s390: remove ARCH_SELECT_MEMORY_MODEL sparc: remove ARCH_SELECT_MEMORY_MODEL mm/gup.c: make follow_page_mask() static mm/memory.c: trivial clean up in insert_page() mm: make !CONFIG_HUGE_PAGE wrappers into static inlines include/linux/mm_types.h: ifdef struct vm_area_struct::swap_readahead_info mm: remove the account_page_dirtied export mm/page_isolation.c: change the prototype of undo_isolate_page_range() include/linux/vmpressure.h: use spinlock_t instead of struct spinlock mm: remove the exporting of totalram_pages include/linux/pagemap.h: document trylock_page() return value mm:debug: mm/failslab.c: by default, do not fail allocations with direct reclaim only Patch series "debug_pagealloc improvements": mm, debug_pagelloc: use static keys to enable debugging mm, page_alloc: more extensive free page checking with debug_pagealloc mm, debug_pagealloc: use a page type instead of page_ext flag mm:pagecache: Patch series "fix filler_t callback type mismatches", v2: mm/filemap.c: fix an overly long line in read_cache_page mm/filemap: don't cast ->readpage to filler_t fo