summaryrefslogtreecommitdiff
path: root/drivers/input/joystick
AgeCommit message (Collapse)AuthorFilesLines
2022-01-05Input: spaceball - fix parsing of movement data packetsLeo L. Schwab1-2/+9
commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream. The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: iforce - fix control-message timeoutJohan Hovold1-1/+1
commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen1-0/+2
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox ↵Olivier Crête1-0/+1
Series X|S commit 42ffcd1dba1796bcda386eb6f260df9fc23c90af upstream. Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca> Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin1-1/+16
commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream. There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-05Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind1-0/+2
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds3-0/+275
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-09-28Input: joystick - add ADC attached joystick driver.Artur Rojek3-0/+275
Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200927123302.31062-2-contact@artur-rojek.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-3/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-10Merge branch 'for-linus' of ↵Linus Torvalds4-18/+25
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-07-21Merge branch 'for-linus' into nextDmitry Torokhov1-0/+1
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
2020-07-07Input: Use fallthrough pseudo-keywordGustavo A. R. Silva4-18/+25
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-4/+4
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09Input: adi - work around module name confictArnd Bergmann1-0/+1
Making module name conflicts a fatal error breaks sparc64 allmodconfig: Error log: error: the following would cause module name conflict: drivers/char/adi.ko drivers/input/joystick/adi.ko Renaming one of the modules would solve the problem, but then cause other problems because neither of them is automatically loaded and changing the name is likely to break any setup that relies on manually loading it by name. As there is probably no sparc64 system with this kind of ancient joystick attached, work around it by adding a Kconfig dependency that forbids them from both being modules. It is still possible to build the joystick driver if the sparc64 adi driver is built-in. Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: xpad - add custom init packet for Xbox One S controllersŁukasz Patron1-0/+12
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: psxpad-spi - switch to using polled mode of input devicesDmitry Torokhov2-31/+34
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts psxpad-spi driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05Input: sidewinder - make array seq static const, makes object smallerColin Ian King1-1/+1
Don't populate the array seq on the stack but instead make it static const. Makes the object code smaller by 30 bytes. Before: text data bss dec hex filename 22284 3184 0 25468 637c drivers/input/joystick/sidewinder.o After: text data bss dec hex filename 22158 3280 0 25438 635e drivers/input/joystick/sidewinder.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-11Merge tag 'v5.3-rc4' into nextDmitry Torokhov1-0/+5
Sync up with mainline to bring in device_property_count_u32 andother newer APIs.
2019-08-06Input: iforce - add sanity checksOliver Neukum1-0/+5
The endpoint type should also be checked before a device is accepted. Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-22Input: add support for the FlySky FS-iA6B RC receiverMarkus Koch3-2/+244
This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS). It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote controls as a joystick input device. To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud serial device is required. I will upstream it after this patch is merged. More information about the hardware can be found here: https://notsyncing.net/?p=blog&b=2018.linux-fsia6b Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Input: iforce - remove empty multiline commentsTim Schumacher6-18/+0
Those are remnants of the SPDX identifier migration, which haven't been removed properly. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Merge tag 'v5.2' into nextDmitry Torokhov37-400/+37
Sync up with mainline to resolve conflicts in iforce driver.
2019-06-22Input: iforce - add the Saitek R440 Force WheelTim Schumacher2-0/+2
This is added based on the fact that this is an iforce-based device and that the Windows driver for the R440 works for the Logitech WingMan Formula Force after replacing the device/vendor IDs. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use unaligned accessors, where appropriateDmitry Torokhov2-7/+12
Instead of open-coding conversion from/to little-endian, let's use proper accessors. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - drop couple of temps from transport codeDmitry Torokhov2-10/+4
Transport initialization code now deals mostly with transport-specific data, so we can drop couple of temporary variables. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - drop bus type from iforce structureDmitry Torokhov3-7/+0
It is not needed anymore as behavior is controlled by the transport operations set up for given device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use DMA-safe buffores for USB transfersDmitry Torokhov3-15/+25
USB transport has to use cache line-aligned buffers for transfers to avoid DMA issues; serio doe snot have such restrictions. Let's move "data_in" buffer from main driver structure into transport modules and make sure USB requirements are respected. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - allow callers supply data buffer when fetching device IDsDmitry Torokhov4-30/+47
We want to move buffer handling into transport layers as the properties of buffers (DMA-safety, alignment, etc) are different for different transports. To allow this, let's allow caller to specify their own buffers for the results of iforce_get_id_packet() and let transport drivers to figure what buffers they need to use for transfers. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - only call iforce_process_packet() if initializedDmitry Torokhov2-4/+1
It is excessive to check if device is fully initialized in iforce_process_packet(), as for USB-conected devices we do not start collecting reports until the device is fully initialized. Let's change serio transport code to not call iforce_process_packet() until device initialization is done. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - signal command completion from transport codeDmitry Torokhov2-5/+6
Signalling command completion from iforce_process_packet() does not make sense, as not all transport use the same data path for both commands and motion data form the device, that is why USB code already has to signal command completion iforce_usb_out(). Let's move signalling completion into individual transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - do not combine arguments for iforce_process_packet()Dmitry Torokhov4-11/+13
Current code combines packet type and data length into single argument to iforce_process_packet() and then has to untangle it. It is much clearer to simply use separate arguments. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - factor out hat handling when parsing packetsDmitry Torokhov1-44/+57
This makes code clearer a bit. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - update formatting of switch statementsDmitry Torokhov3-100/+100
According to our coding style case labels in switch statements should be aligned with the switch keyword. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use DMA-safe buffer when getting IDs from USBDmitry Torokhov1-46/+22
When working with USB devices we need to use DMA-safe buffers, and iforce->edata is not one. Let's rework the code to allocate temporary buffer (iforce_get_id() is called only during initialization so there is no reason to have permanent buffer) and use it. While at it, let's utilize usb_control_msg() API which simplifies code. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - split into core and transport modulesDmitry Torokhov7-43/+25
Now that we have moved enough transport details into separate source files we can change them into transport modules so that they are only loaded when needed. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move transport data into transport modulesDmitry Torokhov3-104/+144
This moves transport-specific data from main iforce structure into transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - add bus type and parent arguments to iforce_init_device()Dmitry Torokhov4-18/+8
Note that the parent device for the USB-connected controllers is now USB interface instead of USB device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - introduce start and stop io transport opsDmitry Torokhov4-23/+34
Add start_io() and stop_io() transport methods so that core does not have to know the details. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move command completion handling to serio codeDmitry Torokhov2-8/+11
Continue teasing apart protocol-specific bits from core into transport modules. This time move RS232-specific command completion handling from core to iforce-serio module. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move get_id to the transport operationsDmitry Torokhov4-65/+51
To avoid #ifdef-ing out parts of the code and having conditionals in normal control flow, let's define "get_id" transport method and move implementation into respective transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - introduce transport opsDmitry Torokhov4-28/+29
In order to tease apart the driver into core and transport modules, let's introduce transport operations and make "xmit" the very first one such operation. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - remove "being used" sillinessDmitry Torokhov1-10/+1
The kernel is supposed to handle multiple devices, static flags in packet handling code will never work. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner28-368/+28
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149Thomas Gleixner1-1/+1
Based on 1 normalized pattern(s): licensed under the gpl 2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 82 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100845.150836982@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 31Thomas Gleixner2-26/+2
Based on 1 normalized pattern(s): this program is free warftware you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.095407238@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner3-0/+3
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner2-0/+2
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-03Merge branch 'next' into for-linusDmitry Torokhov1-1/+1
Prepare input updates for 5.1 merge window.
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-24 10:40:56 +0000