summaryrefslogtreecommitdiff
path: root/drivers/input/mouse
AgeCommit message (Collapse)AuthorFilesLines
2022-01-05Input: appletouch - initialize work before device registrationPavel Skripkin1-2/+2
commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 upstream. Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29Input: elantech - fix stack out of bound access in elantech_change_report_id()Andrea Righi1-1/+7
[ Upstream commit 1d72d9f960ccf1052a0630a68c3d358791dbdaaa ] The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 [ 6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 6.513872] page dumped because: kasan: bad access detected [ 6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame: [ 6.513887] elantech_change_report_id+0x0/0x256 [psmouse] [ 6.513941] this frame has 1 object: [ 6.513947] [32, 34) 'param' [ 6.513956] Memory state around the buggy address: [ 6.513962] ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00 [ 6.513969] ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00 [ 6.513982] ^ [ 6.513988] ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513995] ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00 [ 6.514000] ================================================================== Define param[] in elantech_change_report_id() as an array of 3 bytes to prevent the out-of-bounds access in the stack. Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode") BugLink: https://bugs.launchpad.net/bugs/1945590 Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20211116095559.24395-1-andrea.righi@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang1-0/+13
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07Input: elan_i2c - add new trackpoint report type 0x5FJingle Wu3-14/+23
commit 056115daede8d01f71732bc7d778fb85acee8eb6 upstream. The 0x5F is a new trackpoint report type used by some modules. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071511.32349-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Nikolai Kostrigin <nickel@basealt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07Input: elantech - fix protocol errors for some trackpoints in SMBus modejingle.wu2-2/+101
commit e4c9062717feda88900b566463228d1c4910af6d upstream. There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann1-1/+1
commit f051ae4f6c732c231046945b36234e977f8467c6 upstream. gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-11Input: elan_i2c - fix firmware update on newer ICsjingle.wu4-8/+9
The argument to iap page type command depends on the firmware page size. Fixes: bfd9b92bc8f9 ("Input: elan_i2c - handle firmware updated on newer ICs") Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-18Merge branch 'next' into for-linusDmitry Torokhov1-2/+4
Prepare input updates for 5.10 merge window.
2020-10-05Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1Hans de Goede1-0/+1
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201005114919.371592-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-04Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2Jason A. Donenfeld1-1/+2
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. We also tidy up the comments a bit, as the X1E is essentially the same computer as the P1. Acked-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-3-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-04Input: synaptics-rmi4 - rename f30_data to gpio_dataVincent Huang1-1/+1
f30_data in rmi_device_platform_data could be also referenced by RMI function 3A, so rename it and the structure name to avoid confusion. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200930094147.635556-2-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-28Input: trackpoint - enable Synaptics trackpointsVincent Huang1-0/+2
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs") Reviewed-by: Harry Cutts <hcutts@chromium.org> Tested-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: trackpoint - add new trackpoint variant IDsVincent Huang2-8/+12
Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-06Input: sentelic - fix error return when fsp_reg_write failsColin Ian King1-1/+1
Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-06Input: alps - remove redundant assignment to variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603135742.130852-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-29Input: elan_i2c - add ic type 0x15Jingle Wu1-1/+2
The update firmware flow of ic type 0x15 is same with ic type 0x14. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200730060526.12439-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-21Input: psmouse - add a newline when printing 'proto' by sysfsXiongfeng Wang1-1/+1
When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-21Merge branch 'for-linus' into nextDmitry Torokhov2-4/+6
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
2020-07-21Merge branch 'elan-i2c' into nextDmitry Torokhov5-132/+283
Bring in update to Elan touchpad driver to support newer touchpads with higher resolution.
2020-07-21Input: elan_i2c - add support for high resolution reportsJingle Wu4-59/+126
Newer controllers (identified as "pattern" version 2) send higher resolution reports, with 16-bit X and Y coordinates (previous generations used 12-bit values). These new high resolution reports use report ID of 0x60. SMbus controllers use the same buffer size for both the new and old reports, and because of that high resolution reports no longer carry area of contact data with SMbus. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200710054116.5529-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-20Input: elan_i2c - do not constantly re-query pattern IDDmitry Torokhov4-35/+23
We do not need to constantly re-query pattern ID, we can instead query it once and then pass to methods that need it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14Jingle Wu1-1/+13
This adds firmware size and page sizes for ic types 0x11, 0x13 and 0x14. IC 0x14 uses 512-byte firmware page size. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - handle firmware updated on newer ICsJingle Wu4-7/+60
Newer ICs with IC type value starting with 0x0D and newer bootloader code use 128-byte firmware pages. Their bootloader also needs to be switched to proper mode before executing firmware update. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - add support for different firmware page sizesJingle Wu4-25/+41
Prepare driver for devices that use different sizes of firmware pages. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - fix detecting IAP version on older controllersJingle Wu1-4/+10
Older controllers in bootloader mode need a different command to retrieve the IAP version. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200714105641.15151-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - handle devices with patterns above 1Jingle Wu1-2/+2
Extend fetching and parsing parameters of the controllers to devices with "patterns" above 1 (which currently should be handled in the same fashion as devices with pattern 1). Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - make fetching IC type of older controllers more robustJingle Wu2-8/+10
On older controllers IC type is reported in the 2nd byte of ETP_I2C_OSM_VERSION_CMD, however if controller's firmware is not flashed correctly it may return incorrect data. Fortunately there is also ETP_I2C_IAP_VERSION_P0_CMD command that can be used when controller in either normal or IAP mode, and which is guaranteed to return accurate data, so let's use it. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-17Input: elan_i2c - handle firmware not implementing "get pattern" commandJingle Wu1-1/+7
Not all versions of firmware implement "get pattern" command. When encountering those assume that the controllers use older pattern. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-07Input: Use fallthrough pseudo-keywordGustavo A. R. Silva9-15/+13
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06Input: elantech - remove redundant assignments to variable errorColin Ian King1-3/+3
The variable error is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603140431.131347-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06Input: elan_i2c - only increment wakeup count on touchDerek Basehore1-4/+5
This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06Input: synaptics - enable InterTouch for ThinkPad X1E 1st genIlya Katsnelson1-0/+1
Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by: Ilya Katsnelson <me@0upti.me> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-06-06Merge branch 'next' into for-linusDmitry Torokhov2-2/+2
Prepare input updates for 5.8 merge window.
2020-05-28Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection
2020-05-26Input: synaptics - add a second working PNP_ID for Lenovo T470sDennis Kadioglu1-0/+1
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a" instead of the already included PNP ID "LEN006c". However, my touchpad seems to work well without any problems using RMI. So this patch adds the other PNP ID. Signed-off-by: Dennis Kadioglu <denk@eclipso.email> Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-12Input: introduce input_mt_report_slot_inactive()Jiada Wang1-1/+1
input_mt_report_slot_state() ignores "tool" argument when the slot is closed, which has caused a bit of confusion. Let's introduce input_mt_report_slot_inactive() to report inactive slot state. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-26Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix to generate proper timestamps on key autorepeat events that were broken recently - a fix for Synaptics driver to only activate reduced reporting mode when explicitly requested - a new keycode for "selective screenshot" function - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix stale timestamp on key autorepeat events Input: move the new KEY_SELECTIVE_SCREENSHOT keycode Input: avoid BIT() macro usage in the serio.h UAPI header Input: synaptics-rmi4 - set reduced reporting mode only when requested Input: synaptics - enable RMI on HP Envy 13-ad105ng Input: allocate keycode for "Selective Screenshot" key Input: tm2-touchkey - add support for Coreriver TC360 variant dt-bindings: input: add Coreriver TC360 binding dt-bindings: vendor-prefixes: Add Coreriver vendor prefix Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
2020-03-24Input: synaptics - enable RMI on HP Envy 13-ad105ngYussuf Khalil1-0/+1
This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist. Signed-off-by: Yussuf Khalil <dev@pp3345.net> Link: https://lore.kernel.org/r/20200307213508.267187-1-dev@pp3345.net Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-15Merge branch 'for-linus' of ↵Linus Torvalds3-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a few drivers have been updated to use flexible-array syntax instead of GCC extension - ili210x touchscreen driver now supports the 2120 protocol flavor - a couple more of Synaptics devices have been switched over to RMI4 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list Input: synaptics - enable SMBus on ThinkPad L470 Input: synaptics - switch T470s to RMI4 by default Input: gpio_keys - replace zero-length array with flexible-array member Input: goldfish_events - replace zero-length array with flexible-array member Input: psmouse - switch to using i2c_new_scanned_device() Input: ili210x - add ili2120 support Input: ili210x - fix return value of is_visible function
2020-02-14Input: cyapa - replace zero-length array with flexible-array memberGustavo A. R. Silva1-4/+4
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214172132.GA28389@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - remove the LEN0049 dmi id from topbuttonpad listBenjamin Tissoires1-1/+1
The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - enable SMBus on ThinkPad L470Gaurav Agrawal1-0/+1
Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-13Input: synaptics - switch T470s to RMI4 by defaultLyude Paul1-0/+1
This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-10Input: psmouse - switch to using i2c_new_scanned_device()Wolfram Sang1-3/+5
Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200210165902.5250-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-22Input: synaptics - switch another X1 Carbon 6 to RMI/SMbusHans Verkuil1-0/+1
Some Lenovo X1 Carbon Gen 6 laptops report LEN0091. Add this to the smbus_pnp_ids list. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191119105118.54285-2-hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-22Input: fix Kconfig indentationKrzysztof Kozlowski1-8/+8
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306373-29581-1-git-send-email-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Merge tag 'v5.4-rc5' into nextDmitry Torokhov2-29/+32
Sync up with mainline.
2019-10-17Merge branch 'for-linus' of ↵Linus Torvalds1-26/+29
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is that we are reverting blanket enablement of SMBus mode for devices with Elan touchpads that report BIOS release date as 2018+ because there are older boxes with updated BIOSes that still do not work well in SMbus mode. We will have to establish whitelist for SMBus mode it looks like" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: elantech - enable SMBus on new (2018+) systems" Input: synaptics-rmi4 - avoid processing unknown IRQs Input: soc_button_array - partial revert of support for newer surface devices Input: goodix - add support for 9-bytes reports Input: da9063 - fix capability and drop KEY_SLEEP
2019-10-15Revert "Input: elantech - enable SMBus on new (2018+) systems"Kai-Heng Feng1-26/+29
This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c. Apparently use dmi_get_bios_year() as manufacturing date isn't accurate and this breaks older laptops with new BIOS update. So let's revert this patch. There are still new HP laptops still need to use SMBus to support all features, but it'll be enabled via a whitelist. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-18 17:30:18 +0000