| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit ea3715941a9b7d816a1e9096ac0577900af2a69e upstream.
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e28a0974d749e5105d77233c0a84d35c37da047e upstream.
Add HyperX controller support to xpad_device and xpad_table.
Suggested-by: Chris Toledanes <chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230906231514.4291-1-hphyperxdev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1999a6b12a3b5c8953fc9ec74863ebc75a1b851d upstream.
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb988e46da2e4eae89f5337e047ce372fe33d5b1 ]
The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.
Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountain
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
gpio_int_idx == 0 case
commit 423622a90abb243944d1517b9f57db53729e45c4 upstream.
Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().
It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.
This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.
This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.
But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:
[ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5
Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).
Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.
Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.
Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 upstream.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.
Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a65cd7ef5a864bdbbe037267c327786b7759d4c6 upstream.
Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.
Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2cb5cc822b6c9ee72c56ce1d81671b22c05406a upstream.
When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.
The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.
Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream.
syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct. When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.
Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.
[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc141c35af873c6796e043adcb820833bd8ef8c5 ]
The driver has been switched to use IRQF_NO_AUTOEN, but in the error
unwinding and remove paths calls to enable_irq() were left in place, which
will lead to an incorrect enable counter value.
Fixes: bcd9730a04a1 ("Input: move to use request_irq by IRQF_NO_AUTOEN flag")
Link: https://lore.kernel.org/r/20230724053024.352054-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 687fe7dfb736b03ab820d172ea5dbfc1ec447135 ]
Remove option having i2c client contain raw gpio number instead of proper
IRQ number. There are no users of this facility in mainline and it will
allow cleaning up the driver code with regard to wakeup handling, etc.
Link: https://lore.kernel.org/r/20230724053024.352054-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: cc141c35af87 ("Input: tca6416-keypad - fix interrupt enable disbalance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e00b8bf5624767f6be7427b6eb532524793463e ]
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.
Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.
The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.
Fixes: 1e4189d8af27 ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit eb09074bdb05ffd6bfe77f8b4a41b76ef78c997b upstream.
The touchpad of this device is both connected via PS/2 and i2c. This causes
strange behavior when both driver fight for control. The easy fix is to
prevent the PS/2 driver from accessing the mouse port as the full feature
set of the touchpad is only supported in the i2c interface anyway.
The strange behavior in this case is, that when an external screen is
connected and the notebook is closed, the pointer on the external screen is
moving to the lower right corner. When the notebook is opened again, this
movement stops, but the touchpad clicks are unresponsive afterwards until
reboot.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230607173331.851192-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8c9cce9cb81b5fdc6e66bf3f129727b89e8daab7 ]
Since PM8998/PM660, the power key debounce register was redefined to
support shorter debounce times. On PM8941 the shortest debounce time
(represented by register value 0) was 15625us, on PM8998 the shortest
debounce time is 62us, with the default being 2ms.
Adjust the bit shift to correctly program debounce on PM8998 and newer.
Fixes: 68c581d5e7d8 ("Input: add Qualcomm PM8941 power key driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230529-pm8941-pwrkey-debounce-v1-2-c043a6d5c814@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ]
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's
respect the settings specified in the firmware description.
Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ]
When doing the initial startup there's no need to poll without any
delay and spam the I2C bus.
Let's sleep 15ms between each attempt, which is the same time as used
in the vendor driver.
Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20a99a291d564a559cc2fd013b4824a3bb3f1db7 ]
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 978134c4b192ed04ecf699be3e1b4d23b5d20457 upstream.
Because the kernel increments device's open count in input_open_device()
even if device is inhibited, the counter should always be decremented in
input_close_device() to keep it balanced.
Fixes: a181616487db ("Input: Add "inhibited" property")
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://lore.kernel.org/r/ZFFz0xAdPNSL3PT7@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b63a88bb62ba2ddf5fcd956be85fe46624628b9 upstream.
The kernel only allocate 5 MT slots; check that transmitted slot ID
falls within the acceptable range.
Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit feee70f4568650cf44c573488798ffc0a2faeea3 upstream.
While doing my research to improve the xpad device names I noticed
that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013,
so that Razer Sabertooth instance looked wrong and very suspect to
me. I didn't see any mention in the official drivers, either.
After doing more research, it turns out that the xpad list
is used by many other projects (like Steam) as-is [1], this
issue was reported [2] and Valve/Sam Lantinga fixed it [3]:
[1]: https://github.com/libsdl-org/SDL/blob/dcc5eef0e2395854b254ea2873a4899edab347c6/src/joystick/controller_type.h#L251
[2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/
[3]: https://hg.libsdl.org/SDL/rev/29809f6f0271
(With multiple Internet users reporting similar issues, not linked here)
After not being able to find the correct VID/PID combination anywhere
on the Internet and not receiving any reply from Razer support I did
some additional detective work, it seems like it presents itself as
"Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00.
Leaving us with this:
* Razer Sabertooth (1689:fe00)
* Razer Sabertooth Elite (24c6:5d04)
* Razer DeathAdder 2013 (1532:0037) [note: not a gamepad]
So, to sum things up; remove this conflicting/duplicate entry:
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
As the real/correct one is already present there, even if
the Internet as a whole insists on presenting it as the
Razer Sabertooth Elite, which (by all accounts) is not:
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
Actual change in SDL2 referencing this kernel issue:
https://github.com/libsdl-org/SDL/commit/e5e54169754ca5d3e86339d968b20126d9da0a15
For more information of the device, take a look here:
https://github.com/xboxdrv/xboxdrv/pull/59
You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt
Fixes: f554f619b70 ("Input: xpad - sync device IDs with xboxdrv")
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5bca3688bdbc3b58a2894b8671a8e2378efe28bd ]
rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put().
Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b3d80fd27a3c2d8715a40cbf876139b56195f162 upstream.
Fix WARNING in pegasus_open/usb_submit_urb
Syzbot bug: https://syzkaller.appspot.com/bug?id=bbc107584dcf3262253ce93183e51f3612aaeb13
Warning raised because pegasus_driver submits transfer request for
bogus URB (pipe type does not match endpoint type). Add sanity check at
probe time for pipe value extracted from endpoint descriptor. Probe
will fail if sanity check fails.
Reported-and-tested-by: syzbot+04ee0cb4caccaed12d78@syzkaller.appspotmail.com
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/20230404074145.11523-1-soumya.negi97@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a0432bab6ea3203d220785da7ab3c7677f70ecb upstream.
The Android Lenovo Yoga Book X90F / X90L uses the same goodix touchscreen
with 9 bytes touch reports for its touch keyboard as the already supported
Windows Lenovo Yoga Book X91F/L, add a DMI match for this to
the nine_bytes_report DMI table.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230315134442.71787-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5bad62f9107b701a6def7cac1f5f65862219b83 upstream.
Fujitsu Lifebook A574/H requires the nomux option to properly
probe the touchpad, especially when waking from sleep.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230303152623.45859-1-jdenose@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8980f190947ba29f23110408e712444884b74251 upstream.
The recent change of -funsigned-char causes additions of negative
numbers to become additions of large positive numbers, leading to wrong
calculations of mouse movement. Change these casts to be explicitly
signed, to take into account negative offsets.
Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211
Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 754ff5060daf5a1cf4474eff9b4edeb6c17ef7ab upstream.
The AlpsPS/2 code previously relied on the assumption that `char` is a
signed type, which was true on x86 platforms (the only place where this
driver is used) before kernel 6.2. However, on 6.2 and later, this
assumption is broken due to the introduction of -funsigned-char as a new
global compiler flag.
Fix this by explicitly specifying the signedness of `char` when sign
extending the values received from the device.
Fixes: f3f33c677699 ("Input: alps - Rushmore and v7 resolution support")
Signed-off-by: msizanoen <msizanoen@qtmlabs.xyz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbedf1a33970c9b825ae75b81fbd3e88e224a418 upstream.
A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
boot and sometimes also after resume. However both are required for the
keyboard to not fail completely sometimes after boot or resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ffa6206ebf8d39e83d87ac226df68dbbe155819a ]
When commit commit fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile
button") was applied, one hunk ended up in the wrong function; move it to
where it belongs.
Fixes: fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile button")
Signed-off-by: Matthias Benkmann <matthias.benkmann@gmail.com>
Link: https://lore.kernel.org/r/20230318162106.0aef4ba5@ninja
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79c81d137d36f9635bbcbc3916c0cccb418a61dd ]
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops.
Fixes: 7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver")
Reported-by: "Stahl, Michael" <mstahl@moba.de>
Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9c445d2637c938a800fcc8b5f0b10e60c94460c7 upstream.
The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be
occasionally unresponsive after resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230110134524.553620-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream.
This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because
it causes loss of keyboard on HP 15-da1xxx.
Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8d4c313c03f104c69e25ab03058d8955be9dc387 ]
IQS7222A revisions 1.13 and later widen the gesture multiplier from
x4 ms to x16 ms. Add a means to scale the gesture timings specified
in the device tree based on the revision of the device.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y1SRdbK1Dp2q7O8o@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 404f3b48e65f058d94429e4a1ec16a1f82ff3b2f ]
Nonzero return values of several calls to fwnode_property_read_u32()
are silently ignored, leaving no way to know the properties were not
applied in the event of an error.
Solve this problem by evaluating fwnode_property_read_u32()'s return
value, and reporting an error for any nonzero return value not equal
to -EINVAL which indicates the property was absent altogether.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y1SRRrpQXvkETjfm@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbd16b0d839978e8c8bec2b9a162373f64fc2fbb ]
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(). Solve this
problem by moving the node handling from iqs7222_parse_props() to
the new iqs7222_parse_reg_grp(), leaving the former to do nothing
but parse properties. The latter then manages the reference count
in a single location and consistent fashion.
This change drastically simplifies iqs7222_parse_all(), which can
then call iqs7222_parse_reg_grp() on every register group without
having to treat each register group differently.
For nested event nodes, common parsing code has been factored out
to the new iqs7222_parse_event() so as to allow the event node to
be dropped from as few locations as possible.
As part of this refactor, the 'linux,code' property has been made
optional. This enables applications that define an event with the
sole purpose of enabling a GPIO.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y1SRJIQ3WPwNpC0K@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2b80d9dd14cb5b70dc254bddbc4eea932694791 ]
The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.
Prevents this build error:
ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'
Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]
As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.
We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:
devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.
Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).
Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.
Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6100a19c4fcfe154dd32f8a8ef4e8c0b1f607c75 ]
Fix a Kconfig warning for JOYSTICK_ADC by also selecting
IIO_BUFFER.
WARNING: unmet direct dependencies detected for IIO_BUFFER_CB
Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
Selected by [y]:
- JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y]
Fixes: 2c2b364fddd5 ("Input: joystick - add ADC attached joystick driver.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f6fd232978906f6fb054529210b9faec384bd45 ]
Select variants of silicon do not define a default slider size, in
which case the size must be specified in the device tree. If it is
not, the axis's maximum value is reported as 65535 due to unsigned
integer overflow.
To solve this problem, move the existing zero-check outside of the
conditional block that checks whether the property is present.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y1SRXEi7XMlncDWk@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Raydium touchscreen driver to stop leaking memory when
sending commands to the chip
* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
|
|
There is a kmemleak when test the raydium_i2c_ts with bpf mock device:
unreferenced object 0xffff88812d3675a0 (size 8):
comm "python3", pid 349, jiffies 4294741067 (age 95.695s)
hex dump (first 8 bytes):
11 0e 10 c0 01 00 04 00 ........
backtrace:
[<0000000068427125>] __kmalloc+0x46/0x1b0
[<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
[<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts]
[<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
[<00000000a310de16>] i2c_device_probe+0x651/0x680
[<00000000f5a96bf3>] really_probe+0x17c/0x3f0
[<00000000096ba499>] __driver_probe_device+0xe3/0x170
[<00000000c5acb4d9>] driver_probe_device+0x49/0x120
[<00000000264fe082>] __device_attach_driver+0xf7/0x150
[<00000000f919423c>] bus_for_each_drv+0x114/0x180
[<00000000e067feca>] __device_attach+0x1e5/0x2d0
[<0000000054301fc2>] bus_probe_device+0x126/0x140
[<00000000aad93b22>] device_add+0x810/0x1130
[<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
[<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
[<00000000ffec4177>] of_i2c_notify+0x100/0x160
unreferenced object 0xffff88812d3675c8 (size 8):
comm "python3", pid 349, jiffies 4294741070 (age 95.692s)
hex dump (first 8 bytes):
22 00 36 2d 81 88 ff ff ".6-....
backtrace:
[<0000000068427125>] __kmalloc+0x46/0x1b0
[<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
[<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts]
[<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
[<00000000a310de16>] i2c_device_probe+0x651/0x680
[<00000000f5a96bf3>] really_probe+0x17c/0x3f0
[<00000000096ba499>] __driver_probe_device+0xe3/0x170
[<00000000c5acb4d9>] driver_probe_device+0x49/0x120
[<00000000264fe082>] __device_attach_driver+0xf7/0x150
[<00000000f919423c>] bus_for_each_drv+0x114/0x180
[<00000000e067feca>] __device_attach+0x1e5/0x2d0
[<0000000054301fc2>] bus_probe_device+0x126/0x140
[<00000000aad93b22>] device_add+0x810/0x1130
[<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
[<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
[<00000000ffec4177>] of_i2c_notify+0x100/0x160
After BANK_SWITCH command from i2c BUS, no matter success or error
happened, the tx_buf should be freed.
Fixes: 3b384bd6c3f2 ("Input: raydium_ts_i2c - do not split tx transactions")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for 8042 to stop leaking platform device on unload
- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
need to reset controller to load config from firmware
- a workaround for Acer Switch to avoid interrupt storm from home and
power buttons
- a workaround for more ASUS ZenBook models to detect keyboard
controller
- a fix for iforce driver to properly handle communication errors
- touchpad on HP Laptop 15-da3001TU switched to RMI mode
* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix leaking of platform device on module removal
Input: i8042 - apply probe defer to more ASUS ZenBook models
Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
Input: soc_button_array - add use_low_level_irq module parameter
Input: iforce - invert valid length check when fetching device IDs
Input: goodix - try resetting the controller when no config is set
dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
|
|
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are yet a few more ASUS ZenBook models that require the deferred
probe. At least, there are different ZenBook UX325x and UX425x
models. Let's extend the DMI matching table entries for adapting
those missing models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221108142027.28480-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Like on the Acer Switch 10 SW5-012, the Acer Switch V 10 SW5-017's _LID
method messes with home- and power-button GPIO IRQ settings, causing an
IRQ storm.
Add a quirk entry for the Acer Switch V 10 to the dmi_use_low_level_irq[]
DMI quirk list, to use low-level IRQs on this model, fixing the IRQ storm.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: http |
