summaryrefslogtreecommitdiff
path: root/drivers/interconnect/qcom
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16interconnect: qcom: qcs404: Remove GPU and display RPM IDsGeorgi Djakov1-2/+2
[ Upstream commit 7ab1e9117607485df977bb6e271be5c5ad649a4c ] The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6 These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov1-4/+4
commit f39488ea2a75c49634c8611090f58734f61eee7c upstream. As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.4 Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov1-2/+2
commit b29b8113bb41285eb7ed55ce0c65017b5c0240f7 upstream. As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-20interconnect: qcom: Fix icc_onecell_data allocationLeonard Crestez2-2/+4
This is a struct with a trailing zero-length array of icc_node pointers but it's allocated as if it were a single array of icc_nodes instead. This allocates too much memory at probe time but shouldn't have any noticeable effect. Both sdm845 and qcs404 are affected. Fix by replacing kcalloc with kzalloc and using the "struct_size" macro. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Link: https://lore.kernel.org/linux-pm/a7360abb6561917e30bbfaa6084578449152bf1d.1569348056.git.leonard.crestez@nxp.com/ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-20drivers: qcom: Add BCM vote macro to headerJordan Crouse1-18/+1
The macro to generate a Bus Controller Manager (BCM) TCS command is used by the interconnect driver but might also be interesting to other drivers that need to construct TCS commands for sub processors so move it out of the sdm845 specific file and into the header. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-15interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404Mao Wenan1-1/+1
There is one compilation error when CONFIG_INTERCONNECT_QCOM_QCS404=y and CONFIG_INTERCONNECT_QCOM_SMD_RPM=y, as well as CONFIG_COMPILE_TEST=y, but CONFIG_QCOM_SMD_RPM is not set, logs as below: drivers/interconnect/qcom/smd-rpm.o: In function `qcom_icc_rpm_smd_send': smd-rpm.c:(.text+0xe4): undefined reference to `qcom_rpm_smd_write' Makefile:1071: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 This is because INTERCONNECT_QCOM_QCS404 depends on QCOM_SMD_RPM || COMPILE_TEST. Here CONFIG_COMPILE_TEST=y, so CONFIG_INTERCONNECT_QCOM_SMD_RPM is selected. If CONFIG_QCOM_SMD_RPM is not set, then qcom_rpm_smd_write() is not defined, and compilation error happen. Fix this by removing COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404. Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add QCS404 interconnect provider driverBjorn Andersson3-0/+550
Add driver for the interconnect buses found in Qualcomm QCS404-based platforms. The topology consists of three NoCs that are controlled by a remote processor. This remote processor collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add interconnect RPM over SMD driverGeorgi Djakov4-0/+97
On some Qualcomm SoCs, there is a remote processor, which controls some of the Network-On-Chip interconnect resources. Other CPUs express their needs by communicating with this processor. Add a driver to handle communication with this remote processor. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add tagging and wake/sleep support for sdm845David Dai1-31/+108
Add support for wake and sleep commands by using a tag to indicate whether or not the aggregate and set requests fall into execution state specific bucket. Signed-off-by: David Dai <daidavid1@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: Add support for path tagsGeorgi Djakov1-1/+1
Consumers may have use cases with different bandwidth requirements based on the system or driver state. The consumer driver can append a specific tag to the path and pass this information to the interconnect platform driver to do the aggregation based on this state. Introduce icc_set_tag() function that will allow the consumers to append an optional tag to each path. The aggregation of these tagged paths is platform specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22interconnect: qcom: Add sdm845 interconnect provider driverDavid Dai3-0/+856
Introduce Qualcomm SDM845 specific provider driver using the interconnect framework. Signed-off-by: David Dai <daidavid1@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-31 19:26:59 +0000