summaryrefslogtreecommitdiff
path: root/drivers/media/platform/coda/coda-common.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21media: coda: demote s_ctrl debug messages to level 2Philipp Zabel1-1/+1
Otherwise the default initialization would always swamp the debug log. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: move job ready message to coda_debug level 2Philipp Zabel1-1/+1
Use the newly freed verbose debug level 2 for job ready debug messages. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21media: coda: move register debugging to coda_debug level 3Philipp Zabel1-2/+2
This allows to use coda_debug level 2 for verbose but not quite as verbose debug logging. Register access level logging is of limited use anyway, as this includes busy polling of status bits. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-08media: coda: fix unset field and fail on invalid field in buf_preparePhilipp Zabel1-0/+10
v4l2-compliance likes to queue a buffer with field set to V4L2_FIELD_ANY and expects it to be returned corrected to a valid field. Follow vicodec in handling this in the buf_prepare callback. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: throw error on create_bufs with too small sizePhilipp Zabel1-0/+3
If VIDIOC_CREATE_BUFS is called with a sizeimage smaller than the queue sizeimage, fail with -EINVAL instead of correcting the size and continuing without error. This is required by v4l2-compliance. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: allow encoder to set colorimetry on the output queuePhilipp Zabel1-5/+5
v4l2-compliance sets colorimetry on the output queue and then verifies that querying colorimetry on the capture queue returns the same configuration. For this to work, the encoder must allow setting context colorimetry parameters on the output queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: implement encoder frame size enumerationPhilipp Zabel1-0/+37
The stateful encoder API requires VIDIOC_ENUM_FRAMESIZES to be implemented. Allow enumeration of supported frame sizes for encoding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: disable encoder command on decoder and vice versaPhilipp Zabel1-8/+10
Return -ENOTTY when userspace tries to call VIDIOC_(TRY_)ENCODER_CMD on a decoder instance or VIDIOC_(TRY_)DECODER_CMD on an encoder instance. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: add min number of buffers controlsPhilipp Zabel1-0/+6
Add min number of buffers for capture (decoder) and output (encoder) controls, which are required by the stateful video decoder / encoder interface specification. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: remove mask from decoder h.264 level controlPhilipp Zabel1-18/+4
Since levels are specified in terms of maximum values, there is no reason to filter out lower levels than the supported maximum. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: coda: set codec earlierPhilipp Zabel1-8/+20
The chosen codec depends on the coded format, which is known as soon as the S_FMT call on the coded queue. This allows to use the codec in callbacks that may be called before start_streaming, such as buf_queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-21media: coda: use macroblock tiling on CODA960 onlyPhilipp Zabel1-1/+1
Coda7541 and earlier do not support macroblock tiling. They do support the NV12 format, though. Enable macroblock tiling for NV12 only on CODA960. This fixes crashes when trying to use NV12 support on CodaHx4. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: coda: Add control for h.264 chroma qp index offsetPhilipp Zabel1-0/+5
Allow to set a fixed quantization parameter offset between luma and chroma in the h.264 encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: coda: Add control for h.264 constrained intra predictionPhilipp Zabel1-0/+6
Allow to enable constrained intra prediction in the h.264 encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-07media: coda: fix H.264 deblocking filter controlsPhilipp Zabel1-8/+7
Add support for the third loop filter mode V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY, and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls. The filter offset controls are signed values in the -6 to 6 range and are stored into the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are double their value, in range of -12 to 12. Rename variables to more closely match the nomenclature in the H.264 specification. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: debug output when setting visible size via crop selectionPhilipp Zabel1-0/+3
In addition to the S_FMT debug output, S_SELECTION (SEL_TGT_CROP) is relevant to determine encoded size. Add debug output for it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: normalise debug outputPhilipp Zabel1-45/+34
Consistently add the context index to debug output, which otherwise is impossible to make sense of when two contexts are running concurrently. For this purpose, add a convenience macro coda_dbg(). Use the function name with the coda_ prefix stripped as keyword where applicable, and consistently use vid-out and vid-cap names for the queues. Add sequence counters to the decoder job finished message and correctly indicate B frames. Add a start streaming message to complement the stop streaming message and a start encoding message to complement the existing start decoding message. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: improve queue busy error messagePhilipp Zabel1-1/+2
Use v4l2_type_names to indicate which of the two queues is busy. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: fail S_SELECTION for read-only targetsPhilipp Zabel1-22/+29
v4l2-compliance complains if S_SELECTION returns 0 for read-only targets. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: never set infinite timeperframePhilipp Zabel1-3/+3
v4l2-compliance complains if G_PARM returns 0 in the denominator. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: implement ENUM_FRAMEINTERVALSPhilipp Zabel1-0/+34
v4l2-compliance complains about S_PARM being supported, but not ENUM_FRAMEINTERVALS. Report a continuous frame interval even though the hardware only supports 16-bit numerator and denominator, with min/max values that can be programmed into the mailbox registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: set V4L2_CAP_TIMEPERFRAME flag in coda_s_parmPhilipp Zabel1-0/+1
The flag is already set in coda_g_parm, but v4l2-compliance complains about it not being set during S_PARM. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: don't disable IRQs across buffer meta handlingLucas Stach1-3/+2
The CODA driver uses threaded IRQs only, so there is nothing happening in hardirq context that could interfere with the buffer meta handling. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: remove unused instances listPhilipp Zabel1-9/+0
The per-device instance list is unused, remove it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: reduce minimum frame size to 48x16 pixels.Philipp Zabel1-2/+2
Three macroblocks seem to be the minimum resolution that can be encoded and decoded by the CODA960 h.264 codec. Picture run commands fail for smaller resolutions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: always hold back decoder jobs until we have enough bitstream ↵Philipp Zabel1-5/+8
payload The bitstream prefetch unit reads data in 256 byte blocks with some kind of queueing. For the decoder to see data up to a desired position in the next run, the bitstream has to be filled for 2 256 byte blocks past that position aligned up to the next 256 byte boundary. This should make sure we never run into a buffer underrun condition if userspace does not supply new input buffers fast enough. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: store unmasked fifo position in metaPhilipp Zabel1-1/+0
Storing the unmasked kfifo->in position as meta->start and ->end allows to more easily compare a point past meta->end with the current kfifo->in. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: fix memory corruption in case more than 32 instances are openedPhilipp Zabel1-16/+10
The ffz() return value is undefined if the instance mask does not contain any zeros. If it returned 32, the following set_bit would corrupt the debugfs_root pointer. Switch to IDA for context index allocation. This also removes the artificial 32 instance limit for all except CodaDx6. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: coda: don't overwrite h.264 profile_idc on decoder instanceLucas Stach1-1/+2
On a decoder instance, after the profile has been parsed from the stream __v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the read-only profile control. This ends up calling back into the CODA driver where a missing check on the s_ctrl caused the profile information that has just been parsed from the stream to be overwritten with the default baseline profile. Later on the driver fails to enable frame reordering, based on the wrong profile information. Fixes: 347de126d1da (media: coda: add read-only h.264 decoder profile/level controls) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: coda: remove redundant null pointer check before of_node_putzhong jiang1-2/+1
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab1-4/+4
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: coda: use encoder crop rectangle to set visible width and heightPhilipp Zabel1-5/+40
Allow to set a crop rectangle on the encoder output queue to set the visible resolution as required by the V4L2 codec API. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: jpeg: allow non-JPEG colorspacePhilipp Zabel1-2/+0
The hardware codec is not colorspace aware. We should trust userspace to set the correct colorimetry information on the OUTPUT queue and mirror the exact same setting on the CAPTURE queue. There is no reason to restrict colorspace to JPEG for JPEG images, if userspace injects the correct colorspace information into the JPEG headers after encoding. Fixes: b14ac545688d ("[media] coda: improve colorimetry handling") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: clear hold flag on streamoffPhilipp Zabel1-0/+1
If new buffers are queued after streamoff, the flag will be cleared anyway, so this is mostly for the purpose of correctness. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: add read-only h.264 decoder profile/level controlsPhilipp Zabel1-1/+114
The decoder profile/level controls initially can be used to determine supported profiles and levels. The values are set for a given stream once the headers are parsed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: mem2mem: Remove unused v4l2_m2m_ops .lock/.unlockEzequiel Garcia1-22/+4
Commit f1a81afc98e3 ("[media] m2m: fix bad unlock balance") removed the last use of v4l2_m2m_ops.lock and v4l2_m2m_ops.unlock hooks. They are not actually used anymore. Remove them. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: set colorimetry on coded queuePhilipp Zabel1-1/+16
Do not set context colorimetry on the raw (OUTPUT) queue for encoders. Always set colorimetry on the coded queue (CAPTURE for encoders, OUTPUT for decoders). This also skips propagation of capture queue format and selection rectangle on S_FMT(OUTPUT) to the CAPTURE queue for encoders. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: do not try to propagate format if capture queue busyPhilipp Zabel1-0/+14
The driver helpfully resets the capture queue format and selection rectangle whenever output format is changed. This only works while the capture queue is not busy. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: reuse coda_s_fmt_vid_cap to propagate format in coda_s_fmt_vid_outPhilipp Zabel1-13/+1
Instead of duplicating the same code, call into coda_s_fmt_vid_out to propagate the output format to the capture queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-02-26media: coda: Add i.MX51 (CodaHx4) supportPhilipp Zabel1-4/+40
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix (bogus) sparse warning about uninited me_bits] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18media: coda: fix capture TRY_FMT for YUYV with non-MB-aligned widthsPhilipp Zabel1-3/+4
Since bytesperline always fulfills VDOA width requirements, detile the whole buffer instead of limiting to visible width. This stops TRY_FMT from returning -EINVAL for YUYV capture buffers that are not a multiple of 16 wide. An alternative would be to always round up width to stride, as we report the valid image rectange via G_SELECTION (V4L2_SEL_TGT_COMPOSE_DEFAULT), but that would require all applications to handle the compose default rectangle properly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18media: coda: set min_buffers_neededLucas Stach1-0/+6
The current driver implementation expects at least one buffer on all queues to start streaming. Properly signal this to the vb2 core, to avoid confusion when streamon is racing with qbuf. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: coda: constify platform_device_idArvind Yadav1-1/+1
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08media: coda: reduce iram size to leave space for suspend to ramJan Luebbe1-1/+1
The on-chip SRAM of i.MX6S is only 128 KiB. 4 KiB of that are allocated for suspend to RAM since commit df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q"). Reduce the requested IRAM size to 124 KiB to avoid an allocation failure that causes the coda driver to not use the SRAM at all. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: coda: explicitly request exclusive reset controlPhilipp Zabel1-1/+2
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: coda: disable BWB only while decoding on CODA 960Philipp Zabel1-3/+10
Disabling the BWB works around hangups observed while decoding. Since no issues have been observed while encoding, and disabling BWB also reduces encoding performance, reenable it for encoding. Fixes: 89ed025d5c53 ("[media] coda: disable BWB for all codecs on CODA 960") Reported-by: Ian Arkver <ian.arkver.dev@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Ian Arkver <ian.arkver.dev@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: wake up capture queue on encoder stop after output streamoffPhilipp Zabel1-1/+1
If an encoder stop command is issued after the output queue has already stopped streaming, the qsequence counter has been reset to 0. Always wake up the capture queue if the output queue is not streaming. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: extend GOP size rangePhilipp Zabel1-1/+3
CodaDx6 only accepts GOP sizes up to 60 frames, but CODA960 can handle up to 99 frames. If we disable automatic I frame generation altogether by setting GOP size to 0, we can let an application produce arbitrarily large I frame intervals using the V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME control. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: do not reassign ctx->tiled_map_type in coda_s_fmtPhilipp Zabel1-2/+3
This smatch warning: coda/coda-common.c:706 coda_s_fmt() warn: missing break? reassigning 'ctx->tiled_map_type' can be silenced by moving the ctx->tiled_map_type assignment into the breakout condition. That way the field is not reassigned when falling through to the next switch statement. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: coda: add h264 and mpeg4 profile and level controlsPhilipp Zabel1-0/+47
CODA7541 supports H.264 BP level 3/3.1 and MPEG-4 SP level 5/6. CODA960 supports H.264 BP level 4.0 and MPEG-4 SP level 5/6. Implement the necessary profile and level controls to let userspace know this. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-23 04:16:20 +0000