| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
- Conversion of max9286 and adv748x to V4L2 subdev active state
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
devm_regmap_init_mmio() can fail, add a check and bail out in case of
error.
Fixes: 4e5bd3fdbeb3 ("media: imx-pxp: convert to regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240514095038.3464191-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use v4l2-jpeg core API to import reference quantization and huffman tables
used for JPEG Encoding.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use exported huffman and quantization tables from v4l2-jpeg core library.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This adds support for stateful V4L2 M2M based driver for Imagination E5010
JPEG Encoder [1] which supports baseline encoding with two different
quantization tables and compression ratio as demanded.
Support for both contiguous and non-contiguous YUV420 and YUV422 semiplanar
formats is added along with alignment restrictions as required by the
hardware.
System and runtime PM hooks are added in the driver along with v4l2 crop
and selection API support.
Minimum resolution supported is 64x64 and
Maximum resolution supported is 8192x8192.
All v4l2-compliance tests are passing [2] :
v4l2-compliance -s -f -a -d /dev/video0 -e /dev/video1
Total for e5010 device /dev/video0: 79, Succeeded: 79, Failed: 0,
Warnings: 0
NOTE: video1 here is VIVID test pattern generator
Also tests [3] were run manually to verify below driver features:
- Runtime Power Management
- Multi-instance JPEG Encoding
- DMABUF import, export support
- NV12, NV21, NV16, NV61 video format support
- Compression quality S_CTRL
- Cropping support using S_SELECTION
Existing V4L2 M2M based JPEG drivers namely s5p-jpeg, imx-jpeg and rcar_jpu
were referred while making this.
TODO:
Add MMU and memory tiling support
[1]: AM62A TRM (Section 7.6 is for JPEG Encoder) :
Link: https://www.ti.com/lit/pdf/spruj16
[2]: v4l2-compliance test :
Link: https://gist.github.com/devarsht/1f039c631ca953a57f405cfce1b69e49
[3]: E5010 JPEG Encoder Manual tests :
Performance:
Link: https://gist.github.com/devarsht/c40672944fd71c9a53ab55adbfd9e28b
Functionality:
Link: https://gist.github.com/devarsht/8e88fcaabff016bb2bac83d89c9d23ce
Compression Quality:
Link: https://gist.github.com/devarsht/cbcc7cd97e8c48ba1486caa2b7884655
Multi Instance:
Link: https://gist.github.com/devarsht/22c2fca08cd3441fb40f2c7a4cebc95a
Crop support:
Link: https://gist.github.com/devarsht/de6f5142f678bb1a5338abfd9f814abd
Runtime PM:
Link: https://gist.github.com/devarsht/70cd95d4440ddc678489d93885ddd4dd
Co-developed-by: David Huang <d-huang@ti.com>
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add initial support for the Wave515 multi-decoder IP. For now it is only
able to decode HEVC Main/Main10 profile videos into YUV420.
This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
Users of the real hardware with Wave515 IP will have to
* provide firmware specific to their SoC
* add struct wave5_match_data like this:
static const struct wave5_match_data platform_name_wave515_data = {
.flags = WAVE5_IS_DEC,
.fw_name = "cnm/wave515_platform_name_fw.bin",
.sram_size = (71 * 1024),
};
* add item to wave5_dt_ids[] like this:
{
.compatible = "vendor,soc-wave515",
.data = &platform_name_wave515_data,
},
* describe new compatible in
Documentation/devicetree/bindings/media/cnm,wave521c.yaml
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Move the excessive "sram-size" device-tree property to the device match
data. Also change the SRAM memory allocation strategy, instead of
allocating exactly sram_size bytes, allocate all available SRAM memory
up to sram_size. Add the placeholders wave5_vpu_dec_validate_sec_axi()
and wave5_vpu_enc_validate_sec_axi() to validate that the allocated SRAM
memory is sufficient to decode/encode bitstream with a given resolution.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Implement a separate setup routine for interrupts to reduce code
duplication. Also enable interrupts based on vpu_attr->support_encoders
and vpu_attr->support_decoders fields to facilitate support for other
Wave5xx IPs, because not all of them are both encoders and decoders.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add initial support for optional reset lines. For now, simply deassert
resets while probing the driver and assert them back when removing the
driver.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for decoding HEVC Main10 profile by scaling the FBC
buffer stride and size by a factor of (bitdepth / 8).
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In section 4.5.1.5. Initialization, the step 4 may be skipped and
continue with the Capture Setup sequence, so if the capture has been
setup, there is no need to trigger the initial source change event, just
start decoding, and follow the dynamic resolution change flow if the
configured values do not match those parsed by the decoder.
And it won't fail the gstreamer pipeline.
Fixes: b833b178498d ("media: imx-jpeg: notify source chagne event when the first picture parsed")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If the picture size parsed by decoder is different from those previously
established, it's a normal flow of dynamic resolution change, not an
error case, the log may mislead that some error occurs in decoding, so
remove the error log in this case.
Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/media/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
MT8195 and MT8188 share a similar MDP3 macro-block, with minor
differences - as in, the latter supports a subset of the number
of components supported by the former, but are otherwise handled
in the same way.
Add driver data for MT8188, reusing the already present MT8195
data where possible.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some VSP modules initialize their control handler after initializing the
subdev, while some initialize it before. This makes the code
inconsistent and more error prone. Standardize on control initialization
after initializing the subdev.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
To prepare for the removal of the vsp1_entity.state field, pass the
state to all entity operations that needs to access it, instead of
accessing the state from the entity inside the operation handlers. This
lowers the number of accesses to the field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
checkpatch.pl complains when function arguments are not named:
WARNING: function definition argument 'struct vsp1_entity *' should also have an identifier name
+ void (*configure_stream)(struct vsp1_entity *,
In preparation for reworking some of the vsp1_entity_operations
functions, fix the warnings for the existing ones.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
Entities access various piece of information from the subdev state when
configuring a partition. The same data is available through the
partition structure passed to the .configure_partition() operation. Use
it to avoid accessing the state, which will simplify moving to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The DRM pipelines don't partition frames, as the hardware operates
synchronously with the display. The entity operations access
configuration data from the entity state in that case, instead of
accessing the partition structure. This requires special cases in
entity-specific code, increasing the driver complexity.
To prepare for simplifying the code, initialize a single partition for
the DRM pipelines, similarly to how video pipelines create one partition
spanning the full image when partitioning isn't needed. The partition is
allocated statically in the vsp1_drm_pipeline structure instead of
dynamically as for video pipelines, as DRM pipelines are guaranteed to
operate on a single partition.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
Some of the code that handles pipeline configuration assumes that
entities in a pipeline's entities list are sorted from sink to source.
To prepare for using that code with the DRM pipeline, insert the BRx
just before the WPF, and the RPFs at the head of the list.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
It is useful for debugging purpose to dump a vsp1_pipeline to the kernel
log. Add a new function to do so, and use it when initializing the video
and DRM pipelines.
As __vsp1_pipeline_dump() needs to construct the log message
iteratively, it uses pr_cont(...) (exact equivalent to the more verbose
"printk(KERN_CONT ..."). The function thus can't use dev_dbg() to log
the initial part of the message, for two reasons:
- pr_cont() doesn't seem to work with dev_*(). Even if the format string
passed to dev_*() doesn't end with a '\n', pr_cont() starts a new line
in the log. This behaviour doesn't seem to be clearly documented, and
may or may not be on purpose.
- Messages printed by dev_dbg() may be omitted if dynamic debugging is
enabled. In that case, the continuation messages will still be
printed, leading to confusing log messages.
To still benefit from the dynamic debug infrastructure, we declare a
vsp1_pipeline_dump() macro that uses _dynamic_func_call() when dynamic
debugging is enabled. The whole vsp1_pipeline_dump() call can be
selected at runtime. The __vsp1_pipeline_dump() function then uses a
plain "printk(KERN_DEBUG ...)" to print the message header using the
debug log level, and pr_cont() to print the rest of the message on the
same line.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_partition_window structure is used to store the horizontal size
of a partition window. This is all that is currently needed, as all
partitions span the whole image vertically. The horizontal window size
is retrieved in the .configure_partition() handler from the
vsp1_partition_window structure, and the vertical window size from the
subdev state.
Accessing the subdev state in the .configure_partition() handler is
problematic in the context of moving to the V4L2 subdev active state
API, as .configure_partition() is called in non-interruptable context,
and the state lock can't be taken. To avoid this, start by storing the
vertical size in the window, replacing the custom vsp1_partition_window
structure with a v4l2_rect. Retrieving the vertical size from the window
in .configure_partition() will be done in a subsequent change.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The entity .configure_partition() function operates on a partition, and
has to retrieve that partition from the pipeline's current partition
field. Pass the partition pointer to the function to make it clearer
what partition it operates on, and remove the vsp1_pipeline.partition
field.
This change clearly shows that the DRM pipeline doesn't use partitions,
which makes entity implementation more complex and error-prone. This
will be addressed in a further cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e8585182 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
When calculation a partition in vsp1_pipeline_calculate_partition(),
there is no need to handle the case where the whole image is covered by
a single partition locally. In that case, the index and div_size
parameters are 0 and format->width respectively, which makes the general
code behave exactly as the special case. Drop the special case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The partition calculation code, located in vsp1_video.c, is not specific
to video pipelines. To prepare for its usage in DRM pipelines, move it
to vsp1_pipe.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The histogram module is the only one that has a custom .get_fmt()
handler, to handle the special case of the output format being fixed.
This can equally well be handled in the .set_fmt() handler instead.
Beside avoiding special cases and using the same .get_fmt() handler in
all modules, it ensures that the correct format is stored in the active
state for the source pad, including when .set_fmt() is called from
vsp1_entity_init_state(). Both are needed to later switch to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The brx_get_compose() function is just a wrapper around
v4l2_subdev_state_get_compose() without any added value. Drop it and
call v4l2_subdev_state_get_compose() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_rwpf_get_crop() function is just a wrapper around
v4l2_subdev_state_get_crop() without any added value. Drop it and call
v4l2_subdev_state_get_crop() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_entity_get_pad_selection() function is just a wrapper around
v4l2_subdev_state_get_crop() or v4l2_subdev_state_get_compose() without
any added value. Drop it and call the functions it wraps directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_entity_get_pad_format() function is just a wrapper around
v4l2_subdev_state_get_format() without any added value. Drop it and call
v4l2_subdev_state_get_format() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
When formats don't match between a subdev and a connected video device,
starting streaming returns an error without giving the user any
indication as to what went wrong. To help debugging pipeline
misconfigurations, add a debug message that indicates the cause of the
failure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The histogram support mixes _irqsave and _irq, causing the following
smatch warning:
drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming()
warn: mixing irqsave and irq
The histo_stop_streaming() calls spin_lock_irqsave() followed by
wait_event_lock_irq(). The former hints that interrupts may be disabled
by the caller, while the latter reenables interrupts unconditionally.
This doesn't cause any real bug, as the function is always called with
interrupts enabled, but the pattern is still incorrect.
Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave()
in histo_stop_streaming(). While at it, switch to spin_lock_irq() and
spin_lock() as appropriate elsewhere.
Fixes: 99362e32332b ("[media] v4l: vsp1: Add histogram support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Create the subdevice state with v4l2_subdev_init_finalize() and
implement the init_state() operation to guarantee the state is initialized.
Store the current image format in the subdev active state and remove it
from the driver private structure.
To guarantee the same image format is applied to all source pads,
propagate the format from the sink pad to the sources, disallowing
changing format on a source pad.
To support both gen3 and gen4, which feature a different number of
source pads, introduce an helper function to return the correct number
of pads.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-5-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Cleanup the V4L2 subdevice in the driver's remove function to
ensure its async connection are freed, and guarantee in future that
the subdev active state is cleaned up.
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-4-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Disable pm_runtime in the probe() function error path.
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-3-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R
BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN
driver and are thus disallowed when capturing frames from the R-Car
CSI-2 interface according to the hardware manual.
As the 1X16 format variants are meant to be used with serial busses they
have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing
from CSI-2, which is a valid setting for CSI-2.
Commit 78b3f9d75a62 ("media: rcar-vin: Add check that input interface
and format are valid") disallowed capturing YUV16 when using the CSI-2
interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in
use.
Fixes: 78b3f9d75a62 ("media: rcar-vin: Add check that input interface and format are valid")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-2-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
clang 19 complains about the missing parameter name. Let's add it.
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/
Fixes: e22b4973ee20 ("media: c8sectpfe: Do not depend on DEBUG_FS")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Report the average QP value of the current encoded frame via the
V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As talked about in commit 14d3ae2efeed ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34af0 ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Several subdev state pointers are used to access the state read-only.
Mark them as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
'tegra_vde_h264_frame' has been unused since
commit 313db7d235a0 ("media: staging: tegra-vde: Remove legacy UAPI
support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
'vb2_dc_conf' has been unused since the original
commit 8f0755c06b90 ("[media] media: Add mem2mem deinterlacing driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
'vpu_malone_frame_buffer' has been unused since the original
commit 145e936380ed ("media: amphion: implement malone decoder rpc
interface").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The RGA driver didn't set the sequence numbers of the returned buffers.
Keep track of the CAPTURE and OUTPUT sequence numbers, and set the
sequence numbers in the source and destination buffers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
