| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1206 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3592
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ]
This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1]
Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]
Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52cdb013036391d9d87aba5b4fc49cdfc6ea4b23 ]
Fix leak in error path.
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25e94139218c0293b4375233c14f2256d7dcfaa8 ]
The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).
The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.
It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f1f4b642451d35667a4dc6a9c0a89d954b530a3 ]
'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 79dd0c69f05f ("V4L: 925: saa7134 alsa is now a standalone module")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f3475a5c77e9eabab43537f713b90f1d19258b7 ]
Convert list_for_each() to list_for_each_entry() where
applicable.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6a21a14106d9718aa4f8e115b1e474888eeba44 ]
As the possible failure of the vzalloc(), e->encoder_buf might be NULL.
Therefore, it should be better to check it in order
to guarantee the success of the initialization.
If fails, we need to free not only 'e' but also 'e->name'.
Also, if the allocation for ctx fails, we need to free 'e->encoder_buf'
else.
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ]
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]---
Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ]
Call i2c_unregister_device(audio) on this error path.
Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c08eadca1bdfa099e20a32f8fa4b52b2f672236d ]
The commit 47677e51e2a4("[media] em28xx: Only deallocate struct
em28xx after finishing all extensions") adds kref_get to many init
functions (e.g., em28xx_audio_init). However, kref_init is called too
late in em28xx_usb_probe, since em28xx_init_dev before will invoke
those init functions and call kref_get function. Then refcount bug
occurs in my local syzkaller instance.
Fix it by moving kref_init before em28xx_init_dev. This issue occurs
not only in dev but also dev->dev_next.
Fixes: 47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a92fc6e55da5b87cecb572275deaff6ac9dd27e ]
Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all
the size checking done later in hdmi_infoframe_unpack(). A better
value is the amount of data read into buffer.
Fixes: 480b8b3e42c3 ("video/hdmi: Pass buffer size to infoframe unpack functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef058cc8b7193d15a771272359c7454839ae74ee ]
Commit 2161536516ed ("media: media/pci: set device_caps in struct video_device")
introduced a regression: V4L2_CAP_TUNER is always present in device_caps,
even when the device has no tuner.
This causes a warning:
WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev]
Fixes: 2161536516ed ("media: media/pci: set device_caps in struct video_device")
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e25a89f743b18c029bfbe5e1663ae0c7190912b0 ]
The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.
Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8310ca94075e784bbb06593cd6c068ee6b6e4ca6 ]
DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers
only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including
offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF
ioctls. This leads to differences in the values presented to userspace.
If userspace attempts to mmap the capture buffer directly using values
from DQBUF, it will fail.
Move the code that applies the magic offset into a helper, and call
that helper from all four ioctl entry points.
[hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret]
Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf")
Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d42b3ad105b5d3481f6a56bc789aa2b27aa09325 upstream.
Make sure to disable runtime PM before returning on probe errors.
Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: stable@vger.kernel.org
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream.
Make sure to balance the runtime PM usage counter on driver unbind.
Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support")
Cc: stable@vger.kernel.org # 3.9
Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5ad05ecad4326ddaa26a83ba2233a67be24c1aaa upstream.
Calling udelay for than 1000us does not always yield the correct
results.
Cc: stable@vger.kernel.org
Reported-by: Михаил <vrserver1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddbcd0c58a6a53e2f1600b9de0ce6a20667c031c upstream.
Wrong solution of rebase conflict leads to calling twice
v4l2_device_unregister in .venus_remove. Delete the second one.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Martin Faltesek <mfaltesek@google.com>
Cc: Guenter Roeck <groeck@google.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09f4d1513267d0ab712f5d29e7bd136535748709 upstream.
Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.
Fixes: 4b32216adb01 ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]
Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.
So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000
It fixes the following runtime warnings:
Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
concurrent video sessions
[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp : ffffffc011d7b7f0
[ 1.946836] pmr_save: 000000e0
[ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[ 1.960355] x25: 0000000000000001 x24: 0000000000000000
[ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[ 1.991849] x13: 0000000000000004 x12: 0000000000000001
[ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP: 300000000
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ]
A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.
In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.
Fix this by adding a check after reading the value of the register.
The following KASAN report reveals it:
BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
print_address_description+0x78/0x290 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x25b/0x380 mm/kasan/report.c:412
__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
_dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200
RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40
R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002
R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Allocated by task 1:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2741 [inline]
slab_alloc mm/slub.c:2749 [inline]
kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
kmem_cache_zalloc include/linux/slab.h:699 [inline]
__kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
__kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
create_files fs/sysfs/group.c:63 [inline]
internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
sysfs_create_group fs/sysfs/group.c:173 [inline]
sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
driver_register+0x1cd/0x410 drivers/base/driver.c:170
__pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
1017
do_one_initcall+0xe0/0x610 init/main.c:884
do_initcall_level init/main.c:952 [inline]
do_initcalls init/main.c:960 [inline]
do_basic_setup init/main.c:978 [inline]
kernel_init_freeable+0x4d0/0x592 init/main.c:1145
kernel_init+0x18/0x190 init/main.c:1062
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8880608c0000
which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
160-byte region [ffff8880608c0000, ffff8880608c00a0)
The buggy address belongs to the page:
page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
^
ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43f0633f89947df57fe0b5025bdd741768007708 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ]
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
msi001_probe+0x13b/0x24b [msi001]
spi_probe+0xeb/0x130
...
do_syscall_64+0x35/0xb0
In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().
Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.
Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com
Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ]
dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597
The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.
[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6441ea29cb2c9314654e093a1cd8020b9b851c8 ]
Commit e955f959ac52 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes: e955f959ac52 ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ]
In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ]
In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.
Fix this bug by adding a kfree of fe in the error path.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
'venus_probe()'
[ Upstream commit 8cc7a1b2aca067397a016cdb971a5e6ad9b640c7 ]
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4bb ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
handling path
[ Upstream commit e4debea9be7d5db52bc6a565a4c02c3c6560d093 ]
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb57879 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08b1cf474b7f72750adebe0f0a35f8e9a3eb75f6 ]
Commit aaaa93eda64b ("media] media: venus: venc: add video encoder files")
is the last in a series of three commits to add core.c vdec.c and venc.c
adding core, encoder and decoder.
The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER
if it has not been set, however both the encoder and decoder rely on
core.v4l2_dev as valid.
core.v4l2_dev will not be valid until v4l2_device_register() has completed
in core.c's probe().
Normally this is never seen however, Dmitry reported the following
backtrace when compiling drivers and firmware directly into a kernel image.
[ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
[ 5.275505] Workqueue: events deferred_probe_work_func
[ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd
[ 5.442486] pc : refcount_warn_saturate+0x140/0x148
[ 5.493756] hub 2-1:1.0: USB hub found
[ 5.496266] lr : refcount_warn_saturate+0x140/0x148
[ 5.500982] hub 2-1:1.0: 4 ports detected
[ 5.503440] sp : ffff800 |
