| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit f656cfbc7a293a039d6a0c7100e1c846845148c1 upstream.
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 8e9e60640067 ("V4L/DVB: staging/lirc: port lirc_streamzap to ir-core")
Cc: stable@vger.kernel.org
Reported-by: syzbot+34008406ee9a31b13c73@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34008406ee9a31b13c73
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36cef585e2a31e4ddf33a004b0584a7a572246de upstream.
Syzbot reported [1] a warning prompted by a check in call_s_stream()
that checks whether .s_stream() operation is warranted for unstarted
or stopped subdevs.
Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that
entities skip a call to .s_stream() unless they have been previously
properly started.
[1] Syzbot report:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460
Modules linked in:
CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0
...
Call Trace:
<TASK>
vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62
vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline]
vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203
vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256
vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789
vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348
vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline]
vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118
__video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122
video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463
v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2b85c01b19
...
Reported-by: syzbot+5bcd7c809d365e14c4df@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5bcd7c809d365e14c4df
Fixes: adc589d2a208 ("media: vimc: Add vimc-streamer for stream control")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6bc076eec6f85f778f33a8242b438e1bd9fcdd59 upstream.
It's no longer practical for the OMAP IOMMU driver to trick
arm_setup_iommu_dma_ops() into ignoring its presence, so let's use the
same tactic as other IOMMU API users on 32-bit ARM and explicitly kick
the arch code's dma_iommu_mapping out of the way to avoid problems.
Fixes: 4720287c7bf7 ("iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e63d465f59011dede0a0f1d21718b59a64c3ff5c ]
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
Fixes: 173a64cb3fcf ("[media] dib8000: enhancement")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/bd1d504d930ae3f073b1e071bcf62cae7708773c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503210602.fvH5DO1i-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2b96a6818159fba8a3bcc38262da9e77f9b3ec7 ]
In allegro_probe(), the v4l2 device is not unregistered in the error
path, which results in a memory leak. Fix it by calling
v4l2_device_unregister() before returning error.
Fixes: d74d4e2359ec ("media: allegro: move driver out of staging")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fcb42b3835e90ef18d68555934cf72adaf58402 ]
The HEVC driver needs to set the start_bit field explicitly to avoid
causing corrupted frames when the VP9 decoder is used in parallel. The
reason for this problem is that the VP9 and the HEVC decoder share this
register.
Fixes: cb5dd5a0fa51 ("media: hantro: Introduce G2/HEVC decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d9e7c172a7f247f7ef0b151fa8c8f044b6a2a070 upstream.
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1221989555db711578a327a9367f1be46500cb48 ]
syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1]
If dvb->mux is not initialized successfully by vidtv_mux_init() in the
vidtv_start_streaming(), it will trigger null pointer dereference about mux
in vidtv_mux_stop_thread().
Adjust the timing of streaming initialization and check it before
stopping it.
[1]
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471
Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8
RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125
RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128
RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188
R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710
FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline]
vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252
dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000
dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486
dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3f8/0xb60 fs/file_table.c:450
task_work_run+0x14e/0x250 kernel/task_work.c:239
get_signal+0x1d3/0x2610 kernel/signal.c:2790
arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+5e248227c80a3be8e96a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5e248227c80a3be8e96a
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2762eab6d4140781840f253f9a04b8627017248b ]
Add support for the Kurokesu C1 PRO camera. This camera experiences the
same issues faced by the Sonix Technology Co. 292A IPC AR0330. As such,
enable the UVC_QUIRK_MJPEG_NO_EOF quirk for this device to prevent
frames from being erroneously dropped.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
camera
[ Upstream commit 81f8c0e138c43610cf09b8d2a533068aa58e538e ]
The Sonix Technology Co. 292A camera (which uses an AR0330 sensor), can
produce MJPEG and H.264 streams concurrently. When doing so, it drops
the last packets of MJPEG frames every time the H.264 stream generates a
key frame. Set the UVC_QUIRK_MJPEG_NO_EOF quirk to work around the
issue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Link: https://lore.kernel.org/r/20241128145144.61475-3-isaac.scott@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2eda35e675b6ea4a0a21a4b1167b121571a9036 ]
Some cameras, such as the Sonix Technology Co. 292A, exhibit issues when
running two parallel streams, causing USB packets to be dropped when an
H.264 stream posts a keyframe while an MJPEG stream is running
simultaneously. This occasionally causes the driver to erroneously
output two consecutive JPEG images as a single frame.
To fix this, we inspect the buffer, and trigger a new frame when we
find an SOI.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241128145144.61475-2-isaac.scott@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 697a252bb2ea414cc1c0b4cf4e3d94a879eaf162 ]
The imx219/imx708 sensors frequently generate a single corrupt frame
(image or embedded data) when the sensor first starts. This can either
be a missing line, or invalid samples within the line. This only occurrs
using the upstream Unicam kernel driver.
Disabling trigger mode elimiates this corruption. Since trigger mode is
a legacy feature copied from the firmware driver and not expected to be
needed, remove it. Tested on the Raspberry Pi cameras and shows no ill
effects.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0794c43ea1e451007e80246e1288ebbf44139397 ]
Add error handling for i2c reads/writes in various places.
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit acd8f58d7a3bce0fbd3263961cd09555c00464ba ]
Add error handling to ub913_hw_init() using a new helper function,
ub913_update_bits().
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d46603eeeb4c6abff1d2e49f2a6ae289dac765e ]
It appears that do_div() once more gets confused by a complex
expression that ends up not quite being constant despite
__builtin_constant_p() thinking it is:
ERROR: modpost: "__aeabi_uldivmod" [drivers/media/dvb-frontends/cxd2841er.ko] undefined!
Use div_u64() instead, forcing the expression to be evaluated
first, and making it a bit more readable.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added Closes tags]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 221cd51efe4565501a3dbf04cc011b537dcce7fb upstream.
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled.
Cc: stable@vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-3-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04d3398f66d2d31c4b8caea88f051a4257b7a161 upstream.
ctrl->handle will only be different than NULL for controls that have
mappings. This is because that assignment is only done inside
uvc_ctrl_set() for mapped controls.
Cc: stable@vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-2-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9fecd096f67a4469536e040a8a10bbfb665918b upstream.
Now we keep a reference to the active fh for any call to uvc_ctrl_set,
regardless if it is an actual set or if it is a just a try or if the
device refused the operation.
We should only keep the file handle if the device actually accepted
applying the operation.
Cc: stable@vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-1-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f00ee2ca8da25ebccb8e19956d853c9055e2c8d0 upstream.
Some cameras, like the ELMO MX-P3, do not return all the bytes
requested from a control if it can fit in less bytes.
Eg: Returning 0xab instead of 0x00ab.
usb 3-9: Failed to query (GET_DEF) UVC control 3 on unit 2: 1 (exp. 2).
Extend the returned value from the camera and return it.
Cc: stable@vger.kernel.org
Fixes: a763b9fb58be ("media: uvcvideo: Do not return positive errors in uvc_query_ctrl()")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241128-uvc-readless-v5-1-cf16ed282af8@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c31cffd5ae2c3d7ef21d9008977a9d117ce7a64e upstream.
If there is an event that needs the V4L2_EVENT_CTRL_CH_FLAGS flag, all
the following events will have that flag, regardless if they need it or
not.
This is because we keep using the same variable all the time and we do
not reset its original value.
Cc: stable@vger.kernel.org
Fixes: 805e9b4a06bf ("[media] uvcvideo: Send control change events for slave ctrls when the master changes")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241114-uvc-roi-v15-1-64cfeb56b6f8@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9ea1a3d88b7947ce8cadb2afceee7a54872bbc5 upstream.
We used the wrong device for the device managed functions. We used the
usb device, when we should be using the interface device.
If we unbind the driver from the usb interface, the cleanup functions
are never called. In our case, the IRQ is never disabled.
If an IRQ is triggered, it will try to access memory sections that are
already free, causing an OOPS.
We cannot use the function devm_request_threaded_irq here. The devm_*
clean functions may be called after the main structure is released by
uvc_delete.
Luckily this bug has small impact, as it is only affected by devices
with gpio units and the user has to unbind the device, a disconnect will
not trigger this error.
Cc: stable@vger.kernel.org
Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241106-uvc-crashrmmod-v6-1-fbf9781c6e83@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42d0ec194aa12e9b97f09a94fe565ba2e5f631a2 upstream.
UB9702 does not have SP and EQ registers, but the driver uses them in
log_status(). Fix this by separating the SP and EQ related log_status()
work into a separate function (for clarity) and calling that function
only for UB960.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5dbbd0609b83f6eb72c005e2e5979d0cd25243c8 upstream.
The driver uses a static CSI-2 virtual channel mapping where all virtual
channels from an RX port are mapped to a virtual channel number matching
the RX port number.
The UB960 and UB9702 have different registers for the purpose, and the
UB9702 version is not correct. Each of the VC_ID_MAP registers do not
contain a single mapping, as the driver currently thinks, but two.
This can cause received VCs other than 0 to be mapped in a wrong way.
Fix this by writing both mappings to each register.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 698cf6df87ffa83f259703e7443c15a4c5ceae86 upstream.
UB9702 doesn't have the registers for SP and EQ. Adjust the code in
ub960_rxport_wait_locks() to not use those registers for UB9702. As
these values are only used for a debug print here, there's no functional
change.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60b45ece41c5632a3a3274115a401cb244180646 upstream.
The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as
part of their remove process, and if the driver is removed multiple
times, eventually leads to put "overflow", possibly causing memory
corruption or crash.
The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media:
i2c: ds90ub9x3: Fix sub-device matching"), which changed the code
related to the sd.fwnode, but missed removing these fwnode_handle_put()
calls.
Cc: stable@vger.kernel.org
Fixes: 905f88ccebb1 ("media: i2c: ds90ub9x3: Fix sub-device matching")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fdbff0f54786e94f0f630ff200ec1d666b1633e upstream.
ccs_limits is allocated in ccs_read_all_limits() after the allocation of
mdata.backing. Ensure that resources are freed in the reverse order of
their allocation by moving out_free_ccs_limits up.
Fixes: a11d3d6891f0 ("media: ccs: Read CCS static data from firmware binaries")
Cc: stable@vger.kernel.org
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82b696750f0b60e7513082a10ad42786854f59f8 upstream.
The length field of the CCS static data blocks was mishandled, leading to
wrong interpretation of the length header for blocks that are 16 kiB in
size. Such large blocks are very, very rare and so this wasn't found
earlier.
As the length is used as part of input validation, the issue has no
security implications.
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df4ff47448fe0d392b29868e8398e3b0e587514d upstream.
This partially reverts commit that made hfi_session_destroy()
the first step of vdec/venc close(). The reason being is a
regression report when, supposedly, encode/decoder is closed
with still active streaming (no ->stop_streaming() call before
close()) and pending pkts, so isr_thread cannot find instance
and fails to process those pending pkts. This was the idea
behind the original patch - make it impossible to use instance
under destruction, because this is racy, but apparently there
are uses cases that depend on that unsafe pattern. Return to
the old (unsafe) behaviour for the time being (until a better
fix is found).
Fixes: 45b1a1b348ec ("media: venus: sync with threaded IRQ during inst destruction")
Cc: stable@vger.kernel.org
Reported-by: Nathan Hebert <nhebert@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b36077ba289b827b4e76e25e8d8e0cc90fa09186 upstream.
Correct the call to dma_set_mask_and_coherent which should be set
to DMA_BIT_MASK(32).
Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 001d3753538d26ddcbef011f5643cfff58a7f672 upstream.
Light frequency was not properly returned when in auto
mode and the detected frequency was 60Hz.
Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Bobrowicz <sam@elite-embedded.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit facb541ff0805314e0b56e508f7d3cbd07af513c upstream.
Fix cpu latency qos list corruption like below. It happens when
we do not remove cpu latency request on error path and free
corresponding memory.
[ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8).
[ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0
<snip>
[ 30.634640] l7 kernel: Call Trace:
[ 30.634650] l7 kernel: <TASK>
[ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6
[ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634690] l7 kernel: ? report_bug+0xff/0x140
[ 30.634702] l7 kernel: ? handle_bug+0x58/0x90
[ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70
[ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20
[ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634742] l7 kernel: plist_add+0xdd/0x140
[ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0
[ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0
[ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/linux-media/c0e94be466b367f1a3cfdc3cb7b1a4f47e5953ae.camel@sapience.com/
Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57d10bcac67707caaa542e09dee86e13ea85defc upstream.
Add a 2-5ms delay when coming out of standby and before reading the
sensor info register durning probe, as instructed by the datasheet. This
standby delay is already present when the sensor starts streaming.
During a cold-boot, reading the IMX296_SENSOR_INFO register would often
return a value of 0x0000, if this delay is not present before.
Fixes: cb33db2b6ccf ("media: i2c: IMX296 camera sensor driver")
Cc: stable@vger.kernel.org
Tested-by: Alexandru Ardelean <aardelean@baylibre.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4b7779abc6633677e6edb79e2809f4f61fde157 upstream.
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV.
Fixes: 46c15a4ff1f4 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241015014053.669-1-thunder.leizhen@huawei.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb2bd86270cd0ad004f4c614ba4f8c63a5720e25 upstream.
When creating links from a subdev to a sink, the current logic tries to
iterate over the endpoints of dev's fwnode.
This might not be correct when the subdev uses a different fwnode
compared to the dev's fwnode.
If, when registering, the subdev's fwnode is not set, the code inside
v4l2_async_register_subdev will set it to the dev's fwnode.
To fix this, just use the subdev's fwnode.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Fixes: 0d3c81e82da9 ("media: v4l2-mc: add v4l2_create_fwnode_links helpers")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbb5298bf1a7b71723cd2bb193642429ceb0fb84 upstream.
In commit 4af65141e38e ("media: marvell: cafe: Register V4L2 device
earlier"), a call to v4l2_device_register() was moved away from
mccic_register() into its caller, marvell/cafe's cafe_pci_probe().
This is not the only caller though -- there's also marvell/mmp.
Add v4l2_device_register() into mmpcam_probe() to unbreak the MMP camera
driver, in a fashion analogous to what's been done to the Cafe driver.
Same for the teardown path.
Fixes: 4af65141e38e ("media: marvell: cafe: Register V4L2 device earlier")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da73efa8e675a2b58f1c7ae61201acfe57714bf7 upstream.
ccs_data_parse() releases the allocated in-memory data structure when the
parser fails, but it does not clean up parsed metadata that is there to
help access the actual data. Do that, in order to return the data
structure in a sane state.
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8004d635f27bbccaa5c083c50d4d5302a6ffa00e upstream.
This reverts commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195.
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com>
Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba3bdb93947c90f098061de1fb2458e2ca040093 upstream.
UB9702 has the refclk freq register at a different offset than UB960,
but the code uses the UB960's offset for both chips. Fix this.
The refclk freq is only used for a debug print, so there's no functional
change here.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1378ffec30367233152b7dbf4fa6a25ee98585d1 upstream.
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35da ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c6ef3a7fa97ec823a1e1af9085cf13db9f7b3bac upstream.
If the uvc_status_init() function fails to allocate the int_urb, it will
free the dev->status pointer but doesn't reset the pointer to NULL. This
results in the kfree() call in uvc_status_cleanup() trying to
double-free the memory. Fix it by resetting the dev->status pointer to
NULL after freeing it.
Fixes: a31a4055473b ("V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107235130.31372-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
af9035_i2c_master_xfer
[ Upstream commit c36b9ad1a8add3c114e25fe167efa217a813b0c7 ]
This fixes a 'ISO C90 forbids mixed declarations and code' compilation
error on af9035_i2c_master_xfer, which is caused by the sanity check added
on user controlled msg[i], before declaring the demodulator register.
Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Link: https://lore.kernel.org/r/20240919172755.196907-1-desnesn@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b12ab055edef2f51733d155617a401a05237bcc ]
Running the v4l2-compliance (1.27.0-5208, SHA: af114250d48d) on the m2m
device fails on the MMAP streaming tests, with the following messages:
fail: v4l2-test-buffers.cpp(240): g_field() == V4L2_FIELD_ANY
fail: v4l2-test-buffers.cpp(1508): buf.qbuf(node)
Apparently, the driver does not properly set the field member of
vb2_v4l2_buffer struct, returning the default V4L2_FIELD_ANY value which
is against the guidelines.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240924103304.124085-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87ce177654e388451850905a1d376658aebe8699 ]
Now we return VB2_BUF_STATE_DONE for valid and invalid frames. Propagate
the correct value, so the user can know if the frame is valid or not via
struct v4l2_buffer->flags.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/linux-media/84b0f212-cd88-46bb-8e6f-b94ec3eccba6@redhat.com
Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")
Signed-off-by: Ricardo Ribalda < |
