| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit c4dedaaeb3f78d3718e9c1b1e4d972a6b99073cd upstream.
When starting the SD Express process, the low power negotiation mode will
be disabled, so we need to re-enable it after switching back to SD mode.
Fixes: 0e92aec2efa0 ("mmc: sdhci-pci-gli: Add support SD Express card for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-2-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c68b5656e55e9324875881f1000eb4ee3603a87 upstream.
On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only
after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz().
So the low power negotiation mode cannot be enabled again.
Introduce gl9767_set_low_power_negotiation() function to fix it.
The explanation process is as below.
static void sdhci_gl9767_set_clock()
{
...
gl9767_vhs_write();
...
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a)
gl9767_disable_ssc_pll(); <--- (b)
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return; <-- (I)
...
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
...
gl9767_set_ssc_pll_205mhz(); <--- (c)
}
...
value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II)
gl9767_vhs_read();
}
(a) disable low power negotiation mode. When return on (I), the low power
mode is disabled. After (b) and (c), VHS is read-only, the low power mode
cannot be enabled on (II).
Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Fixes: d2754355512e ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-1-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27e8fe0da3b75520edfba9cee0030aeb5aef1505 upstream.
While working with the T-Head 1520 LicheePi4A SoC, certain conditions
arose that allowed me to reproduce a race issue in the sdhci code.
To reproduce the bug, you need to enable the sdio1 controller in the
device tree file
`arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi` as follows:
&sdio1 {
bus-width = <4>;
max-frequency = <100000000>;
no-sd;
no-mmc;
broken-cd;
cap-sd-highspeed;
post-power-on-delay-ms = <50>;
status = "okay";
wakeup-source;
keep-power-in-suspend;
};
When resetting the SoC using the reset button, the following messages
appear in the dmesg log:
[ 8.164898] mmc2: Got command interrupt 0x00000001 even though no
command operation was in progress.
[ 8.174054] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 8.180503] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000005
[ 8.186950] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 8.193395] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 8.199841] mmc2: sdhci: Present: 0x03da0000 | Host ctl: 0x00000000
[ 8.206287] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 8.212733] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000decf
[ 8.219178] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 8.225622] mmc2: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
[ 8.232068] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 8.238513] mmc2: sdhci: Caps: 0x3f69c881 | Caps_1: 0x08008177
[ 8.244959] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00191919
[ 8.254115] mmc2: sdhci: Resp[0]: 0x00001009 | Resp[1]: 0x00000000
[ 8.260561] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 8.267005] mmc2: sdhci: Host ctl2: 0x00001000
[ 8.271453] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
0x0000000000000000
[ 8.278594] mmc2: sdhci: ============================================
I also enabled some traces to better understand the problem:
kworker/3:1-62 [003] ..... 8.163538: mmc_request_start:
mmc2: start struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_arg=0x0 cmd_flags=0x2e1 cmd_retries=0 stop_opcode=0 stop_arg=0x0
stop_flags=0x0 stop_retries=0 sbc_opcode=0 sbc_arg=0x0 sbc_flags=0x0
sbc_retires=0 blocks=0 block_size=0 blk_addr=0 data_flags=0x0 tag=0
can_retune=0 doing_retune=0 retune_now=0 need_retune=0 hold_retune=1
retune_period=0
<idle>-0 [000] d.h2. 8.164816: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x10000
intmask_p=0x18000
irq/24-mmc2-96 [000] ..... 8.164840: sdhci_thread_irq:
msg=
irq/24-mmc2-96 [000] d.h2. 8.164896: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x1
intmask_p=0x1
irq/24-mmc2-96 [000] ..... 8.285142: mmc_request_done:
mmc2: end struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_err=-110 cmd_resp=0x0 0x0 0x0 0x0 cmd_retries=0 stop_opcode=0
stop_err=0 stop_resp=0x0 0x0 0x0 0x0 stop_retries=0 sbc_opcode=0
sbc_err=0 sbc_resp=0x0 0x0 0x0 0x0 sbc_retries=0 bytes_xfered=0
data_err=0 tag=0 can_retune=0 doing_retune=0 retune_now=0 need_retune=0
hold_retune=1 retune_period=0
Here's what happens: the __mmc_start_request function is called with
opcode 5. Since the power to the Wi-Fi card, which resides on this SDIO
bus, is initially off after the reset, an interrupt SDHCI_INT_TIMEOUT is
triggered. Immediately after that, a second interrupt SDHCI_INT_RESPONSE
is triggered. Depending on the exact timing, these conditions can
trigger the following race problem:
1) The sdhci_cmd_irq top half handles the command as an error. It sets
host->cmd to NULL and host->pending_reset to true.
2) The sdhci_thread_irq bottom half is scheduled next and executes faster
than the second interrupt handler for SDHCI_INT_RESPONSE. It clears
host->pending_reset before the SDHCI_INT_RESPONSE handler runs.
3) The pending interrupt SDHCI_INT_RESPONSE handler gets called, triggering
a code path that prints: "mmc2: Got command interrupt 0x00000001 even
though no command operation was in progress."
To solve this issue, we need to clear pending interrupts when resetting
host->pending_reset. This ensures that after sdhci_threaded_irq restores
interrupts, there are no pending stale interrupts.
The behavior observed here is non-compliant with the SDHCI standard.
Place the code in the sdhci-of-dwcmshc driver to account for a
hardware-specific quirk instead of the core SDHCI code.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 43658a542ebf ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008100327.4108895-1-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b35746a0fdc73063a4c7fc6208b7abd644f9ef5 upstream.
This reverts commit 2761822c00e8c271f10a10affdbd4917d900d7ea.
When testing on real hardware the patch does not work.
Revert, try to acquire real hardware, and retry.
These systems typically don't have highmem anyway so the
impact is likely zero.
Cc: stable@vger.kernel.org
Reported-by: Charlie <g4sra@protonmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927-kirkwood-mmc-regression-v1-1-2e55bbbb7b19@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT
bit. At this time, we need to check with &, not &&.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1]
revealed the long living issue in dw_mmc.c driver, existing since the
time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc:
Add Synopsys DesignWare mmc host driver."), also making kernel boot
broken on platforms using dw_mmc driver with 16K or 64K pages enabled,
with this message in dmesg:
mmcblk: probe of mmc0:0001 failed with error -22
That's happening because mmc_blk_probe() fails when it calls
blk_validate_limits() consequently, which returns the error due to
failed max_segment_size check in this code:
/*
* The maximum segment size has an odd historic 64k default that
* drivers probably should override. Just like the I/O size we
* require drivers to at least handle a full page per segment.
*/
...
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always
sets .max_seg_size to 4 KiB:
mmc->max_seg_size = 0x1000;
The comment in the code above explains why it's incorrect. Arnd
suggested setting .max_seg_size to .max_req_size to fix it, which is
also what some other drivers are doing:
$ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \
wc -l
18
This change is not only fixing the boot with 16K/64K pages, but also
leads to a better MMC performance. The linear write performance was
tested on E850-96 board (eMMC only), before commit [1] (where it's
possible to boot with 16K/64K pages without this fix, to be able to do
a comparison). It was tested with this command:
# dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync
Test results are as follows:
- 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s
- 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s
- 16K pages, .max_seg_size = 4 KiB: 126 MB/s
- 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s
- 64K pages, .max_seg_size = 4 KiB: 138 MB/s
- 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s
Unfortunately, SD card controller is not enabled in E850-96 yet, so it
wasn't possible for me to run the test on some cheap SD cards to check
this patch's impact on those. But it's possible that this change might
also reduce the writes count, thus improving SD/eMMC longevity.
All credit for the analysis and the suggested solution goes to Arnd.
[1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/
Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Fixes: bb7b8ec62dfb ("mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240826124851.379759-1-liaochen4@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's SD quirks are
referenced in sd_parse_ext_reg_perf() prior to the quirks being initialized
in mmc_blk_probe().
To fix this problem, let's split out an SD-specific list of quirks and
apply in mmc_sd_init_card() instead. In this way, sd_read_ext_regs() to has
the available information for not assigning the SD_EXT_PERF_CACHE as one of
the (un)supported features, which in turn allows mmc_sd_init_card() to
properly skip execution of sd_enable_cache().
Fixes: c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019")
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Co-developed-by: Keita Aihara <keita.aihara@sony.com>
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820230631.GA436523@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success.
Fixes: 2661081f5ab9 ("mmc_test: highmem tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Fix a race condition if the clock provider comes up after mmc is probed,
this causes mmc to fail without retrying.
When given the DEFER error from the clk source, pass it on up the chain.
Fixes: f90a0612f0e1 ("mmc: dw_mmc: lookup for optional biu and ciu clocks")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240811212212.123255-1-ben.whitten@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When we use cmd8 as the tuning command in hs400 mode, the command
response sent back by some eMMC devices cannot be correctly sampled
by MTK eMMC controller at some weak sample timing. In this case,
command timeout error may occur. So we must receive the following
data to make sure the next cmd8 send correctly.
Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support")
Cc: stable@vger.stable.com
Link: https://lore.kernel.org/r/20240716013704.10578-1-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A dev_info() at probe's end() report the supported bus width. It never
reports 8-bits width while the driver can handle it.
Update the info message at then end of the probe to report the use of
8-bits data when needed.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240711081838.47256-3-bastien.curutchet@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
No check is done on the size of the data to be transmiited. This causes
a kernel panic when this size exceeds the sg_miter's length.
Limit the number of transmitted bytes to sgm->length.
Cc: stable@vger.kernel.org
Fixes: ed01d210fd91 ("mmc: davinci_mmc: Use sg_miter for PIO")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240711081838.47256-2-bastien.curutchet@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
blk_queue_max_segment_size() ensured:
if (max_size < PAGE_SIZE)
max_size = PAGE_SIZE;
whereas:
blk_validate_limits() makes it an error:
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
The change from one to the other, exposed sdhci which was setting maximum
segment size too low in some circumstances.
Fix the maximum segment size when it is too low.
Fixes: 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240710180737.142504-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
TMIO uses an of_* function, and SDHI uses pm_runtime functions. Add the
includes directly, so we can clean up another header properly. Sort the
pagemap include while we are here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402070323.JpYfFtkQ-lkp@intel.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-11-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The eMMC RST_N register is implemented as secure register on the BlueField
SoC and controlled by TF-A. This commit sends an SMC call to TF-A for the
eMMC HW reset.
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/2c459196c6867e325f9386ec0559efea464cfdd6.1718213918.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This commit adds a new callback to allow drivers to support platform
specific eMMC HW reset.
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/3df02ffa8bdaa74f5261c8914d2545b97fb3478a.1718213918.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
`sdhci_am654_regmap_config` is not modified and can be declared as const
to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240705-sdhci_am654-const-regmap_config-v1-1-c166a8d48a66@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/mmc/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aubin Constans <aubin.constans@microchip.com>
Acked-by: Aubin Constans <aubin.constans@microchip.com>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20240701100736.4001658-1-allen.lkml@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts the SDHI driver from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
[wsa: fixed build faliures, corrected whitespace issues]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240626085015.32171-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some controllers may not be able to reach a bus clock as low as 400 KHz
due to a lack of sufficient divisors. In these cases, the SD card slot
becomes non-functional as Linux continuously attempts to set the bus
clock to 400 KHz. If the controller is incapable of getting that low,
set its minimum frequency instead. While this may eliminate some SD
cards, it allows those capable of operating at the controller's minimum
frequency to be used.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240625-gigantic-frown-1ef4afa3e6fa@wendy
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit ca78476e4888f1f1 ("mfd: Remove toshiba tmio drivers") removed the
last users of the .set_pwr() callback in the tmio_mmc_data structure.
Remove the callback, and all related infrastructure.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/fbbc13ddd19df2c40933ffa3b82fb14841bf1d4c.1718897545.git.geert+renesas@glider.be
|
|
The Raspberry Pi devices have to date all used ARCH_BCM2835
as their SoC arch dependency so configurations that use this
and not BRCMSTB won't end up with this module in their config.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20240620074248.152353-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SDHCI_QUIRK_UNSTABLE_RO_DETECT is used by only one driver variant.
It was added in 2011 by commit 82b0e23a295c ("mmc: sdhci: Fix read-only
detection with JMicron 388 chip").
Simplify sdhci by moving the logic to the only place it is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240614080051.4005-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
sdhci_check_ro() can call mmc_gpio_get_ro() while holding the sdhci
host->lock spinlock. That would be a problem if the GPIO access done by
mmc_gpio_get_ro() needed to sleep.
However, host->lock is not needed anyway. The mmc core ensures that host
operations do not race with each other, and asynchronous callbacks like the
interrupt handler, software timeouts, completion work etc, cannot affect
sdhci_check_ro().
So remove the locking.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_of_parse() reads device property "wp-inverted" and sets
MMC_CAP2_RO_ACTIVE_HIGH if it is true. MMC_CAP2_RO_ACTIVE_HIGH is used
to invert a write-protect (AKA read-only) GPIO value.
sdhci_get_property() also reads "wp-inverted" and sets
SDHCI_QUIRK_INVERTED_WRITE_PROTECT which is used to invert the
write-protect value as well but also acts upon a value read out from the
SDHCI_PRESENT_STATE register.
Many drivers call both mmc_of_parse() and sdhci_get_property(),
so that both MMC_CAP2_RO_ACTIVE_HIGH and
SDHCI_QUIRK_INVERTED_WRITE_PROTECT will be set if the controller has
device property "wp-inverted".
Amend the logic in sdhci_check_ro() to allow for that possibility,
so that the write-protect value is not inverted twice.
Also do not invert the value if it is a negative error value. Note that
callers treat an error the same as not-write-protected, so the result is
functionally the same in that case.
Also do not invert the value if sdhci host operation ->get_ro() is used.
None of the users of that callback set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
directly or indirectly, but two do call mmc_gpio_get_ro(), so leave it to
them to deal with that if they ever set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
in the future.
Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/of_mmc_spi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/tmio_mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/renesas_sdhi_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_simple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_sd8787.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_emmc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/sdio_uart.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO and SDHI
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240611-md-drivers-mmc-v2-1-2ef2cbcdc061@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The dwcmshc used on Rockchip rk3568 and rk3588 can use cqe, so set
the needed irq handler.
Tested on a rk3588-tiger SoM with dd, hdparm and fio. fio performance
does increase slightly from
Run status group 0 (all jobs):
READ: bw=209MiB/s (219MB/s), 209MiB/s-209MiB/s (219MB/s-219MB/s), io=4096MiB (4295MB), run=19607-19607msec
without CQE to
Run status group 0 (all jobs):
READ: bw=215MiB/s (225MB/s), 215MiB/s-215MiB/s (225MB/s-225MB/s), io=4096MiB (4295MB), run=19062-19062msec
with CQE enabled.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240530215547.2192457-1-heiko@sntech.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Broadcom BCM2712 SoC has an SDHCI card controller using the SDIO CFG
register block present on other STB chips. Add support for BCM2712
SD capabilities of this chipset.
The silicon is SD Express capable but this driver port does not currently
include that feature yet.
Based on downstream driver by raspberry foundation maintained kernel.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/ad2ec39c62c2783dd5de4bf2ec581866e822e2b1.1717061147.git.andrea.porta@suse.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This reverts commit 3ee0e7c3e67cab83ffbbe7707b43df8d41c9fe47.
The patch is not working for unknown reasons and I would
need access to the hardware to fix the bug.
This shouldn't matter anyway: the Moxa Art is not expected
to use highmem, and sg_miter() is only necessary to have
to properly deal with highmem.
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 3ee0e7c3e67c ("mmc: moxart-mmc: Use sg_miter for PIO")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606-mmc-moxart-revert-v1-1-a01c2f40de9c@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When erase/trim/discard completion was converted to mmc_poll_for_busy(),
optional support to poll with the host_ops->card_busy() callback was also
added.
The common sdhci's ->card_busy() turns out not to be working as expected
for the sdhci-brcmstb variant, as it keeps returning busy beyond the card's
busy period. In particular, this leads to the below splat for
mmc_do_erase() when running a discard (BLKSECDISCARD) operation during
mkfs.f2fs:
Info: [/dev/mmcblk1p9] Discarding device
[ 39.597258] sysrq: Show Blocked State
[ 39.601183] task:mkfs.f2fs state:D stack:0 pid:1561 tgid:1561 ppid:1542 flags:0x0000000d
[ 39.610609] Call trace:
[ 39.613098] __switch_to+0xd8/0xf4
[ 39.616582] __schedule+0x440/0x4f4
[ 39.620137] schedule+0x2c/0x48
[ 39.623341] schedule_hrtimeout_range_clock+0xe0/0x114
[ 39.628562] schedu |
