summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
AgeCommit message (Collapse)AuthorFilesLines
2010-09-07bnx2x: Split PHY functionsYaniv Rosner4-853/+1425
Move the code into PHY oriented functions, and for that a new structure is defines for each PHY which contain PHY properties and its own functions. This also enables to encapsulate all PHY specific operations into the PHY functions. During initialization, the PHYs will be probed by the "bnx2x_phy_probe" function to detect which PHYs exist on-board, and configure them accordingly. Note that the ext_phy_reset implementation was incorporated in the ext_phy_init since it is actually part of the PHY initialization procedure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07bnx2x: Unify PHY attributesYaniv Rosner6-1386/+916
Start building the infrastructure for dual media by adding new component of PHY which will be used all along the function. Modify function to work with this component instead of the link_params. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet1-1/+1
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Update version to 1.52.53-5Yaniv Rosner1-2/+2
Update version to 1.52.53-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Add BCM84823 to the supported PHYsYaniv Rosner1-1/+2
Add BCM84823 to the supported PHYs Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Change BCM848xx LED configurationYaniv Rosner1-122/+49
Change 848xx LED configuration according to the new microcode (Boards were shipped with only with the new microcode) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Remove unneeded setting of XAUI low power to BCM8727Yaniv Rosner1-1/+0
Remove unneeded setting of XAUI low power to BCM8727. This was required only in older microcode which is not in the field. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Change BCM848xx configuration according to IEEEYaniv Rosner2-164/+127
Change BCM848xx behavior to fit IEEE such that setting 10Mb/100Mb will use force speed, and setting 1Gb/10Gb will use auto-negotiation with the specific speed advertised Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Reset link before any new link settingsYaniv Rosner1-0/+1
Reset link before any new link settings to avoid potential link issue caused by previous link settings Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Fix potential link issue In BCM8727 based boardsYaniv Rosner2-10/+15
In BCM8727 based boards, setting default 10G link speed after link was set to 1G may lead to link down issue. The problem was setting the right value, but to the wrong registers Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01bnx2x: Fix potential link issue of BCM8073/BCM8727Yaniv Rosner1-2/+2
Fix potential link issue caused by insufficient delay time during SPIROM load of BCM8073/BCM8727 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26bnx2x: fix wrong return from bnx2x_trylock_hw_lockEric Dumazet1-1/+1
bnx2x_trylock_hw_lock() returns a bool : true if succeeded to acquire the lock. false in case of error. -EINVAL is not an acceptable value, since its promoted to true. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25bnx2x: small fix in stats handlingEric Dumazet1-3/+4
Use a private variable to fold rx_dropped value, instead of shared destination buffer, as it might break SNMP applications. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Dmitry Kravkov <dmitry@broadcom.com> Acked-By: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21Merge branch 'master' of ↵David S. Miller2-4/+9
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-08-18bnx2x: Update bnx2x version to 1.52.53-4Yaniv Rosner1-2/+2
Update bnx2x version to 1.52.53-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18bnx2x: Fix PHY locking problemYaniv Rosner1-2/+7
PHY locking is required between two ports for some external PHYs. Since initialization was done in the common init function (called only on the first port initialization) rather than in the port init function, there was in fact no PHY locking between the ports. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net/bnx2x: Adjust confusing if indentationJulia Lawall1-5/+5
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16bnx2x: Load firmware in open() instead of probe()Dmitry Kravkov3-19/+36
Loading firmware when actually bringing eth device up. This also will allow driver to be insmoded when filesystem with firmware files is not available yet. Suggested by Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28net: bnx2x_cmn.c needs net/ip6_checksum.h for csum_ipv6_magicStephen Rothwell1-0/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27Merge branch 'master' of ↵David S. Miller3-13/+29
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c Merge bnx2x bug fixes in by hand... :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: update driver version to 1.52.53-3Dmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Move statistics handling code to bnx2x_stats.*Dmitry Kravkov5-1594/+1647
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate file for ethtool routinesDmitry Kravkov4-1955/+1986
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create bnx2x_cmn.* filesDmitry Kravkov5-2600/+2943
Newly created files have no functionality changes, but includes some functionality from bnx2x_main.c which is common for PF and coming in the future VF driver. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: move global variable load_count to bnx2x.hDmitry Kravkov2-3/+9
This will allow access to this global variable (used in no-mcp mode) from different object files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: store module parameters in driver main structureDmitry Kravkov2-3/+6
Store module parameters during initialization of main driver structure. This will allow access to the parameters from different files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate folder for bnx2x driverDmitry Kravkov12-0/+32582
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 15:53:59 +0000