linux.git - Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git

Age	Commit message (Collapse)	Author	Files	Lines
2021-03-30	can: kvaser_pciefd: Always disable bus load reporting	Jimmy Assarsson	1	-0/+4
	[ Upstream commit 7c6e6bce08f918b64459415f58061d4d6df44994 ] Under certain circumstances, when switching from Kvaser's linuxcan driver (kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting is not disabled. This is flooding the kernel log with prints like: [3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009 Always put the controller in the expected state, instead of assuming that bus load reporting is inactive. Note: If bus load reporting is enabled when the driver is loaded, you will still get a number of bus load packages (and printouts), before it is disabled. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-30	can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling	Zhang Qilong	1	-1/+3
	If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid reference leak. Fixes: 26ad340e582d3 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201128133922.3276973-3-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-18	can: kvaser_pciefd: Fix KCAN bittiming limits	Jimmy Assarsson	1	-2/+2
	Use correct bittiming limits for the KCAN CAN controller. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-1-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-09-03	can: kvaser_pciefd: the PWM generator is running at the bus frequency of the ↵	Christer Beskow	1	-1/+5
	system. The system clock frequency for the bus connected to the PCIe controller shall be used when calculating the frequency of the PWM, not the CAN system clock frequency. Signed-off-by: Christer Beskow <chbe@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-13	can: kvaser_pciefd: Remove unused including <linux/version.h>	YueHaibing	1	-1/+0
	Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-08-13	can: kvaser_pciefd: kvaser_pciefd_pwm_stop(): remove unnecessary code when ↵	Christer Beskow	1	-7/+3
	setting pwm duty cycle to zero To set the duty cycle to zero (i.e. pwm_stop), the trigger value shall be equal to the top value. This is achieved by reading the value of the top bit field from the pwm register and then writing back this value to the trigger and top bit fields. Addresses-Coverity: ("Logically dead code") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Christer Beskow <chbe@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-24	can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices	Henning Colliander	1	-0/+1912
	This patch adds support for Kvaser PCIEcan devices. This includes support for up to 4 CAN channels on a single card, depending on device. Signed-off-by: Henning Colliander <henning.colliander@evidente.se> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Christer Beskow <chbe@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>