summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bcmsysport.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-04net: systemport: fix bcm_sysport_insert_tsb()Florian Fainelli1-6/+7
Similar to commit bc23333ba11fb7f959b7e87e121122f5a0fbbca8 ("net: bcmgenet: fix bcmgenet_put_tx_csum()"), we need to return the skb pointer in case we had to reallocate the SKB headroom. Fixes: 80105befdb4b8 ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-12/+19
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08net: systemport: check harder for out of memory conditionsFlorian Fainelli1-12/+19
There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-04net: systemport: update UMAC_CMD only when link is detectedFlorian Fainelli1-3/+6
When we bring the interface down, phy_stop() will schedule the PHY state machine to call our link adjustment callback. By the time we do so, we may have clock gated off the SYSTEMPORT hardware block, and this will cause bus errors to happen in bcm_sysport_adj_link(): Make sure that we only touch the UMAC_CMD register when there is an actual link. This is safe to do for two reasons: - updating the Ethernet MAC registers only make sense when a physical link is present - the PHY library state machine first set phydev->link = 0 before invoking phydev->adjust_link in the PHY_HALTED case This is a similar fix to the GENET one: c677ba8b3c47650358572091ed8a6af50bfca877 ("net: bcmgenet: update UMAC_CMD only when link is detected"). Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01net: systemport: tell RXCHK if we are using Broadcom tagsFlorian Fainelli1-0/+9
When Broadcom tags are enabled, e.g: when interfaced to an Ethernet switch, make sure that we tell the RXCHK engine that it should be expecting a 4-bytes Broadcom tag after the Ethernet MAC Source Address. Use netdev_uses_dsa() to check for that condition since that will tell us if a switch is attached to our network interface. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-32/+11
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09net: systemport: use kcalloc instead of kzallocFlorian Fainelli1-3/+3
checkpatch.pl flagged two uses of kzalloc() for allocating and zeroing arrays, use kcalloc() instead as recommended. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-09net: systemport: align multiple lines correctlyFlorian Fainelli1-59/+58
checkpatch.pl flagged a bunch of: "CHECK: Alignment should match open parenthesis" problems, fix all of them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: systemport: add Wake-on-LAN supportFlorian Fainelli1-3/+152
Support for Wake-on-LAN using Magic Packet with or without SecureOn password is implemented doing the following: - setting the password to the relevant UniMAC registers - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - enabling the MPD interrupt to wake us The Device Tree binding documentation is also reflected to specify the third optional Wake-on-LAN interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: systemport: rename rx_csum_en to rx_chk_enFlorian Fainelli1-5/+5
This boolean tells us whether we are using the RXCHK hardware block, so use a variable name that reflects that. RXCHK might be used in the future to implement Wake-on-LAN using ARP or unicast packets. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: systemport: add suspend and resume supportFlorian Fainelli1-4/+160
Implement the hardware recommended suspend/resume procedure for SYSTEMPORT. We leverage the previous factoring work such that we can logically break all suspend/resume operations into disctint RX and TX code paths. When the system enters S3, we will loose all register contents, so make sure that we correctly re-program all the hardware and software views of the RX & TX rings as well. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: systemport: add bcm_sysport_netif_{enable,stop}Florian Fainelli1-13/+27
Factor common code that either enables or disables the network interface with the networking stack. We are going to reuse these functions for suspend/resume callbacks. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: systemport: update umac_enable_set to take a bitmaskFlorian Fainelli1-12/+7
Quite often we need to enable either the transmitter or the receiver bits in UMAC_CMD, use umac_enable_set() to do that for us. This is a preliminary change to introduce suspend/resume support in the driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01net: systemport: fix TX NAPI work done return valueFlorian Fainelli1-2/+2
Although we do not limit the number of packets the TX completion function bcm_sysport_tx_reclaim() is allowed to reclaim, we were still using its return value as-is. This means that we could hit the WARN() in net/core/dev.c where work_done >= budget. Make sure we do exit the NAPI context when the TX ring is empty, and pretend there was no work to do. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01net: systemport: fix UniMAC reset logicFlorian Fainelli1-24/+9
The UniMAC CMD_SW_RESET bit is not a self-clearing bit, so we need to assert it, wait a bit and clear it manually. As a result, umac_reset() is updated not to return any value. The previous version of the code simply wrote 0 to the CMD register, which would make the busy-waiting loop exit immediately, having zero effect. By writing 0 to the CMD register, we were clearing all bits in the CMD register, and not using the hardware reset default values which are set on purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01net: systemport: do not clear IFF_MULTICAST flagFlorian Fainelli1-6/+0
The SYSTEMPORT Ethernet MAC supports multicast just fine, it just lacks any sort of Unicast/Broadcast/Multicasting filtering at the Ethernet MAC level since that is handled by the front end Ethernet switch, but that is properly handled by bcm_sysport_set_rx_mode(). Some user-space applications might be relying on the presence of this flag to prevent using multicast sockets, this also prevents that interface from joining the IPv6 all-router mcast group. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: start with carrier offFlorian Fainelli1-0/+3
The SYSTEMPORT driver uses libphy to determine the carrier state, so make sure we start with a carrier off until libphy has completed the link training process. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: fix comment about HW prepending 2bytesFlorian Fainelli1-3/+3
The comment about how the hardware prepends 2bytes to align the IP header on a 4-byte boundary was not correct, fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: correctly check for RX_STATUS_OVFLOW flagFlorian Fainelli1-1/+1
We were missing an and comparison with status to check whether RX_STATUS_OVFLOW is asserted or not in the per-packet status word, fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: fix transmit locking schemeFlorian Fainelli1-5/+7
Our transmit locking scheme did not account for the TX ring full interrupt. If a TX ring full interrupt fires while we are attempting to transmit, we will cause a deadlock to occur. Fix this by making sure that we properly disable interrupts while acquiring the spinlock. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02drivers/net: fix broadcom/bcmsysport.c compile fail on SPARCPaul Gortmaker1-6/+6
To fix: CC drivers/net/ethernet/broadcom/bcmsysport.o In file included from drivers/net/ethernet/broadcom/bcmsysport.c:28:0: drivers/net/ethernet/broadcom/bcmsysport.h:41:8: error: redefinition of 'struct tsb' arch/sparc/include/asm/mmu_64.h:65:8: note: originally defined here make[1]: *** [drivers/net/ethernet/broadcom/bcmsysport.o] Error 1 we change struct tsb to struct bcm_tsb in the broadcom driver in order to avoid the namespace collision. For consistency, we also change struct rsb to struct bcm_rsb, so the Rx/Tx symmetry is maintained. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22net: systemport: use the new fixed PHY helpersFlorian Fainelli1-2/+15
of_phy_connect_fixed_link() is becoming obsolete, and also required platform code to register the fixed PHYs at the specified addresses for those to be usable. Get rid of it and use the new of_phy_is_fixed_link() plus of_phy_register_fixed_link() helpers to transition over the new scheme. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: systemport: wait for packet in umac_enable_set()Florian Fainelli1-0/+6
When umac_enable_set() is used to disable the UniMAC receiver or transmitter, we need to make sure that we wait for a full-sized packet to be processed because the UniMAC hardware stops on a packet boundary, not immediately. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: systemport: fix dma_unmap_single() lenFlorian Fainelli1-1/+1
dma_unmap_single() was called with dma_unmap_len(cb, dma_len), unfortunately we failed to assign this length field in bcm_sysport_rx_refill() or bcm_sysport_alloc_rx_bufs() using dma_unmap_len_set(). This causes packet contents corruption because are we not invoking the cache invalidation routines with the proper length. Fix this by using the full RX buffer size (RX_BUF_LENGTH) because the mappings for the RX bufers are created with that size. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: systemport: pad packets to a minimum of 68 bytesFlorian Fainelli1-4/+20
Packets need to be at least 64 bytes to enter the switch port logic, including the FCS, otherwise they will be discarded as RUNT packets. With packets having Broadcom tags, the 4-bytes tag is first stripped off the packet, and the packet length is then checked, so we need to make sure that the packet length with FCS is at least 64 bytes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: systemport: only update UMAC_CMD if something changedFlorian Fainelli1-5/+6
The link adjustment callback can be called as frequently as desired by the PHY library, as such, let's avoid doing a Read/Modify/Write sequence if nothing changed, which is more than likely since we are interfaced with a switch device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: systemport: Use devm_ioremap_resource()Jingoo Han1-4/+3
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driverFlorian Fainelli1-0/+1614
SYSTEMPORT is the latest Ethernet MAC hardware block used on newer BCM7xxx Set Top Box SoCs in conjunction with an internal Ethernet switch. This patch adds support for this hardware block along with the following hardware features: - support for hardware checksum offload (transmit and receive) - support for the 32 transmit queues - MIB counters reading Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-03 12:04:43 +0000