| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b.
igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.
Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1]
Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2]
Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.
Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
EEE status: not supported
After fix:
EEE settings for enp174s0:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
During successful probe, igc logs this:
[ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The reason is that igc_ptp_init() is called very early, even before
register_netdev() has been called. So the netdev_info() call works
on a partially uninitialized netdev.
Fix this by calling igc_ptp_init() after register_netdev(), right
after the media autosense check, just as in igb. Add a comment,
just as in igb.
Now the log message is fine:
[ 5.200987] igc 0000:01:00.0 eth0: PHC added
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
XSk infra's been using its own DMA sync shortcut to try avoiding
redundant function calls. Now that there is a generic one, remove
the custom implementation and rely on the generic helpers.
xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore,
remove it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 2: Enable Tx hardware timestamp
hwstamp_ctl -i <iface> -t 1 -r 1
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Roman reports a deadlock on unplug of a Thunderbolt docking station
containing an Intel I225 Ethernet adapter.
The root cause is that led_classdev's for LEDs on the adapter are
registered such that they're device-managed by the netdev. That
results in recursive acquisition of the rtnl_lock() mutex on unplug:
When the driver calls unregister_netdev(), it acquires rtnl_lock(),
then frees the device-managed resources. Upon unregistering the LEDs,
netdev_trig_deactivate() invokes unregister_netdevice_notifier(),
which tries to acquire rtnl_lock() again.
Avoid by using non-device-managed LED registration.
Stack trace for posterity:
schedule+0x6e/0xf0
schedule_preempt_disabled+0x15/0x20
__mutex_lock+0x2a0/0x750
unregister_netdevice_notifier+0x40/0x150
netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev]
led_trigger_set+0x102/0x330
led_classdev_unregister+0x4b/0x110
release_nodes+0x3d/0xb0
devres_release_all+0x8b/0xc0
device_del+0x34f/0x3c0
unregister_netdevice_many_notify+0x80b/0xaf0
unregister_netdev+0x7c/0xd0
igc_remove+0xd8/0x1e0 [igc]
pci_device_remove+0x3f/0xb0
Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226")
Reported-by: Roman Lozko <lozko.roma@gmail.com>
Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/
Reported-by: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following the corresponding discussion [1] and [2] refactor the 'igc_open'
method and avoid taking the rtnl_lock() during the 'igc_resume' method.
The rtnl_lock is held by the upper layer and could lead to the deadlock
during resuming from a runtime power management flow. Notify the stack of
the actual queue counts 'netif_set_real_num_*_queues' outside the
'_igc_open' wrapper. This notification doesn't have to be called on each
resume.
Test:
1. Disconnect the ethernet cable
2. Enable the runtime power management via file system:
echo auto > /sys/devices/pci0000\.../power/control
3. Check the device state (lspci -s <device> -vvv | grep -i Status)
Link: https://lore.kernel.org/netdev/20231206113934.8d7819857574.I2deb5804
ef1739a2af307283d320ef7d82456494@changeid/#r [1]
Link: https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedo
ra-pc1c0hjn.dhcp.thefacebook.com/t/ [2]
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Switch the Intel networking drivers to use the new power management ops
declaration formats and macros, which allows us to drop __maybe_unused,
as well as a bunch of ifdef checking CONFIG_PM.
This is safe to do because the compiler drops the unused functions,
verified by checking for any of the power management function symbols
being present in System.map for a build without CONFIG_PM.
If a driver has runtime PM, define the ops with pm_ptr(), and if the
driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of
the macros for declaring the members of the pm_ops structs.
Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on
x64_64.
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initial igc Tx timestamping implementation used only one register for
retrieving Tx timestamps. Commit 3ed247e78911 ("igc: Add support for
multiple in-flight TX timestamps") added support for utilizing all four of
them e.g., for multiple domain support. Remove the stale comment/FIXME.
Fixes: 3ed247e78911 ("igc: Add support for multiple in-flight TX timestamps")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Merge in late fixes to prepare for the 6.9 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.
The IGC_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.
The following flow was used:
1. read IGC_TSIRC into 'tsicr';
2. handle the interrupts present in 'tsirc' and mark them in 'ack';
3. write 'ack' into IGC_TSICR;
As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.
Remove the extra clear in (3).
Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.
Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All filtering parameters such as EtherType and VLAN TCI are stored in host
byte order except for the VLAN EtherType. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
All igc filter implementations use netdev_*() printing functions except for
the flex filters. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use reverse xmas tree coding style convention in igc_add_flex_filter().
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor the igc driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor igc driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for using Timer 1 (i225/i226 have 4 timer registers) as a
free-running clock (the "cycles" clock) in addition to Timer 0 (the
default, "adjustable clock"). The objective is to allow taprio/etf
offloading to coexist with PTP vclocks.
Besides the implementation of .getcyclesx64() for i225/i226, to keep
timestamping working when vclocks are in use, we also need to add
support for TX and RX timestamping using the free running timer, when
the requesting socket is bound to a vclock.
On the RX side, i225/i226 can be configured to store the values of two
timers in the received packet metadata area, so it's a matter of
configuring the right registers and retrieving the right timestamp.
The TX is a bit more involved because the hardware stores a single
timestamp (with the selected timer in the TX descriptor) into one of
the timestamp registers.
Note some changes at how the timestamps are done for RX, the
conversion and adjustment of timestamps are now done closer to the
consumption of the timestamp instead of near the reception.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We can re-use the IGC_SET_FLAG() macro to simplify setting some values
in the TX data descriptor. With the macro it's easier to get the
meaning of the operations.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its use with format
strings:
| if (q_vector->rx.ring && q_vector->tx.ring)
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
Furthermore, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igc_adapter),
| IGC_MAX_TX_QUEUES);
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-10-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Reported-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for using the four sets of timestamping registers that
i225/i226 have available for TX.
In some workloads, where multiple applications request hardware
transmission timestamps, it was possible that some of those requests
were denied because the only in use register was already occupied.
This is also in preparation to future support for hardware
timestamping with multiple PTP domains. With multiple domains chances
of multiple TX timestamps being requested at the same time increase.
Before:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% +1 +41 +73 13
1500 150 0.00% 0.00% 0.00% 100.00% +9 +49 +87 15
2250 225 0.00% 0.00% 0.00% 100.00% +9 +42 +79 13
3375 337 0.00% 0.00% 0.00% 100.00% +11 +46 +81 13
5062 506 0.00% 0.00% 0.00% 100.00% +7 +44 +80 13
7593 759 0.00% 0.00% 0.00% 100.00% +9 +44 +79 12
11389 1138 0.00% 0.00% 0.00% 100.00% +14 +51 +87 13
17083 1708 0.00% 0.00% 0.00% 100.00% +1 +41 +80 14
25624 2562 0.00% 0.00% 0.00% 100.00% +11 +50 +5107 51
38436 3843 0.00% 0.00% 0.00% 100.00% -2 +36 +7843 38
57654 5765 0.00% 0.00% 0.00% 100.00% +4 +42 +10503 69
86481 8648 0.00% 0.00% 0.00% 100.00% +11 +54 +5492 65
129721 12972 0.00% 0.00% 0.00% 100.00% +31 +2680 +6942 2606
194581 16384 16.79% 0.00% 0.87% 82.34% +73 +4444 +15879 3116
291871 16384 35.05% 0.00% 1.53% 63.42% +188 +5381 +17019 3035
437806 16384 54.95% 0.00% 2.55% 42.50% +233 +6302 +13885 2846
After:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -20 +12 +43 13
1500 150 0.00% 0.00% 0.00% 100.00% -23 +18 +57 14
2250 225 0.00% 0.00% 0.00% 100.00% -2 +33 +67 13
3375 337 0.00% 0.00% 0.00% 100.00% +1 +38 +76 13
5062 506 0.00% 0.00% 0.00% 100.00% +9 +52 +93 14
7593 759 0.00% 0.00% 0.00% 100.00% +11 +47 +82 13
11389 1138 0.00% 0.00% 0.00% 100.00% -9 +27 +74 13
17083 1708 0.00% 0.00% 0.00% 100.00% -13 +25 +66 14
25624 2562 0.00% 0.00% 0.00% 100.00% -8 +28 +65 13
38436 3843 0.00% 0.00% 0.00% 100.00% -13 +28 +69 13
57654 5765 0.00% 0.00% 0.00% 100.00% -11 +32 +71 14
86481 8648 0.00% 0.00% 0.00% 100.00% +2 +44 +83 14
129721 12972 15.36% 0.00% 0.35% 84.29% -2 +2248 +22907 4252
194581 16384 42.98% 0.00% 1.98% 55.04% -4 +5278 +65039 5856
291871 16384 54.33% 0.00% 2.21% 43.46% -3 +6306 +22608 5665
We can see that with 4 registers, as expected, we are able to handle a
increasing number of requests more consistently, but as soon as all
registers are in use, the decrease in quality of service happens in a
sharp step.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")
drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")
net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")
tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152] <TASK>
[ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870] call_timer_fn+0x31/0x110
[ 7679.415698] expire_timers+0xb2/0x120
[ 7679.423403] run_timer_softirq+0x179/0x1e0
[ 7679.431532] ? __schedule+0x2b1/0x820
[ 7679.439078] __do_softirq+0xd1/0x295
[ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867] run_ksoftirqd+0x22/0x30
[ 7679.462058] smpboot_thread_fn+0xb7/0x160
[ 7679.469670] kthread+0xcd/0xf0
[ 7679.476097] ? __pfx_kthread+0x10/0x10
[ 7679.483211] ret_from_fork+0x29/0x50
[ 7679.490047] </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? igc_poll+0x1a9/0x14d0 [igc]
__napi_poll+0x2e/0x1b0
net_rx_action+0x126/0x250
__do_softirq+0xd1/0x295
irq_exit_rcu+0xc5/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
cpuidle_enter+0x2e/0x50
call_cpuidle+0x23/0x40
do_idle+0x1be/0x220
cpu_startup_entry+0x20/0x30
rest_init+0xb5/0xc0
arch_call_rest_init+0xe/0x30
start_kernel+0x448/0x760
x86_64_start_kernel+0x109/0x150
secondary_startup_64_no_verify+0xe0/0xeb
</TASK>
more>
[0]kdb>
[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: unde |
